Amir Khazaee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Amir Khazaee has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Hossein Abootorabi Zarchi
Ferdowsi University of Mashhad
5 shared publications - Gholamreza Arab Markadeh
Department of Engineering, Shahrekord University, Shahrekord, Iran
4 shared publications - Hamidreza Mosaddegh Hesar
Department of Electrical Engineering, Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
4 shared publications - Amirnaser Yazdani
Electrical, Computer, and Biomedical Engineering, Toronto Metropolitan University, Toronto, Canada
2 shared publications - Bin Wu
Department of Electrical and Computer Engineering, Ryerson University, Toronto, ON, Canada
2 shared publications Aryan Makhdoumi
Ferdowsi University of Mashhad, Mashhad, Iran
1 shared publication
Latest Publications
- 1 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Ripple Correlation Control for a Low-Cost Single-Stage Photovoltaic Water Pumping System
In this paper, an integrated control algorithm is presented for a low-cost single-stage photovoltaic water pumping system. The pump is driven by a brushless DC motor, controlled in the three-phase conduction mode. The integrated control algorithm includes the maximum power point tracking and the third harmonic injection PWM techniques. While the MPPT ensures the extraction of the maximum available power from the PV panels, the third harmonic injection PWM carries out the switching action of the BLDCM drive. Experimental results demonstrate that the proposed technique reduces torque ripple by approximately 60% when compared to the conventional method with an equal number of drive components.
- 1 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Ripple Correlation Control for a Low-Cost Single-Stage Photovoltaic Water Pumping System
In this paper, an integrated control algorithm is presented for a low-cost single-stage photovoltaic water pumping system. The pump is driven by a brushless DC motor, controlled in the three-phase conduction mode. The integrated control algorithm includes the maximum power point tracking and the third harmonic injection PWM techniques. While the MPPT ensures the extraction of the maximum available power from the PV panels, the third harmonic injection PWM carries out the switching action of the BLDCM drive. Experimental results demonstrate that the proposed technique reduces torque ripple by approximately 60% when compared to the conventional method with an equal number of drive components.
- 6 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (12) , 15509-15520
Intelligent Efficient Control for Brushless Doubly-Fed Induction Machines
In this article, a novel high-efficient control based on brain emotional learning for a brushless doubly-fed induction machine (BDFIM) drive is proposed without requiring a detailed machine model. The step change of the control winding (CW) flux for a given torque and speed is the basis of the proposed controller. The control algorithm detects a steady-state condition by monitoring the speed continuously and then adjusts the CW reference flux’s magnitude to determine the minimum total stator current. The stator current is the sum of the current magnitudes at power and control windings of a BDFIM. This model-free intelligent controller has a simple structure and is independent of the machine parameters and robust to disturbances. The proposed control scheme is assessed by a TMS320F2833 microcontroller synchronized with a personal computer for a 3-kW prototype D132s-BDFIM.
- 6 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (12) , 15509-15520
Intelligent Efficient Control for Brushless Doubly-Fed Induction Machines
In this article, a novel high-efficient control based on brain emotional learning for a brushless doubly-fed induction machine (BDFIM) drive is proposed without requiring a detailed machine model. The step change of the control winding (CW) flux for a given torque and speed is the basis of the proposed controller. The control algorithm detects a steady-state condition by monitoring the speed continuously and then adjusts the CW reference flux’s magnitude to determine the minimum total stator current. The stator current is the sum of the current magnitudes at power and control windings of a BDFIM. This model-free intelligent controller has a simple structure and is independent of the machine parameters and robust to disturbances. The proposed control scheme is assessed by a TMS320F2833 microcontroller synchronized with a personal computer for a 3-kW prototype D132s-BDFIM.
- 30 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (12) , 15325-15335
Loss Minimization Algorithm for Surface-Mounted PMSM Using Ripple-Based Extremum Seeking
In this article, a fast and parameter-intensive loss minimization algorithm (LMA) is proposed for the surface-mounted permanent magnet synchronous machine (PMSM). The algorithm utilizes ripple correlation control to steer the operating point toward the optimal solution by evaluating the correlation between the injected ripple on the control variable and its effect on the input power. Unlike model-based LMAs, this method does not rely on the motor loss model, its parameters, or precomputed information. Instead, it employs a high-speed search-based procedure to minimize the input power directly. The theoretical analysis includes a design procedure and a method for determining the upper bound of the injected ripple frequency based on the principles underlying loss minimization of PMSMs. Since the d -axis current does not contribute to torque production in surface-mounted PMSMs, the artificial perturbation introduced by the algorithm does not result in undesirable torque ripple. The analysis is supported by simulations and experimental tests. The results demonstrate that the proposed algorithm enables the system to converge to the optimum point within around 1.5 s, making it suitable for high-dynamic applications.
- 30 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (12) , 15325-15335
Loss Minimization Algorithm for Surface-Mounted PMSM Using Ripple-Based Extremum Seeking
In this article, a fast and parameter-intensive loss minimization algorithm (LMA) is proposed for the surface-mounted permanent magnet synchronous machine (PMSM). The algorithm utilizes ripple correlation control to steer the operating point toward the optimal solution by evaluating the correlation between the injected ripple on the control variable and its effect on the input power. Unlike model-based LMAs, this method does not rely on the motor loss model, its parameters, or precomputed information. Instead, it employs a high-speed search-based procedure to minimize the input power directly. The theoretical analysis includes a design procedure and a method for determining the upper bound of the injected ripple frequency based on the principles underlying loss minimization of PMSMs. Since the d -axis current does not contribute to torque production in surface-mounted PMSMs, the artificial perturbation introduced by the algorithm does not result in undesirable torque ripple. The analysis is supported by simulations and experimental tests. The results demonstrate that the proposed algorithm enables the system to converge to the optimum point within around 1.5 s, making it suitable for high-dynamic applications.
- 11 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (7) , 8022-8026
Efficient MPPT for BLDCM-Driven PV Pumping System Based on Ripple Correlation Control
A fast and parameter-intensive maximum power point tracking (MPPT) technique is presented for a photovoltaic (PV) water pumping system, driven by the brushless dc motor (BLDCM). The technique is based on the application of “ripple correlation control”. As an advantage, rather than artificial signal injection, the proposed technique employs the inherent perturbations introduced due to phase commutation and nonsinusoidal back-EMF of BLDCM to determine the maximum power points of the PV system. The technique can be simply employed for different configurations of BLDCM-based PV water pumping systems. Experiments are performed to demonstrate the effectiveness of the proposed technique.
- 11 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (7) , 8022-8026
Efficient MPPT for BLDCM-Driven PV Pumping System Based on Ripple Correlation Control
A fast and parameter-intensive maximum power point tracking (MPPT) technique is presented for a photovoltaic (PV) water pumping system, driven by the brushless dc motor (BLDCM). The technique is based on the application of “ripple correlation control”. As an advantage, rather than artificial signal injection, the proposed technique employs the inherent perturbations introduced due to phase commutation and nonsinusoidal back-EMF of BLDCM to determine the maximum power points of the PV system. The technique can be simply employed for different configurations of BLDCM-based PV water pumping systems. Experiments are performed to demonstrate the effectiveness of the proposed technique.
- 16 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (11) , 13598-13605
Maximum Torque Per Total Ampere Strategy for Vector-Controlled Brushless Doubly Fed Induction Machine Drive Taking Iron Loss Into Account
The aim of this study is to introduce the maximum torque per total ampere (MTPTA) control strategy for brushless doubly fed induction machine drives taking iron loss into account. In this regard, the condition for realizing the MTPTA is investigated in the presence of iron loss by a theoretical approach. It is shown the proposed strategy is realized when the MTPTA criterion tracks zero as reference signal. As a result, the current is not only shared between the stator windings fairly but also total stator currents are minimized for a given torque. The experimental results confirm the performance of the proposed control strategy.
- 16 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (11) , 13598-13605
Maximum Torque Per Total Ampere Strategy for Vector-Controlled Brushless Doubly Fed Induction Machine Drive Taking Iron Loss Into Account
The aim of this study is to introduce the maximum torque per total ampere (MTPTA) control strategy for brushless doubly fed induction machine drives taking iron loss into account. In this regard, the condition for realizing the MTPTA is investigated in the presence of iron loss by a theoretical approach. It is shown the proposed strategy is realized when the MTPTA criterion tracks zero as reference signal. As a result, the current is not only shared between the stator windings fairly but also total stator currents are minimized for a given torque. The experimental results confirm the performance of the proposed control strategy.
- 21 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (8) , 6692-6700
MTPA Strategy for Direct Torque Control of Brushless DC Motor Drive
In this paper, a high performance maximum torque per Ampere (MTPA) control strategy is proposed for surface-mounted brushless DC (BLDC) motor drive. Most of published works in the literature have not considered the effect of iron loss branch. As will be demonstrated analytically, underestimating the iron loss in the control system of BLDC motor has two undesirable effects. First, it causes torque errors. Second, the MTPA fails to track the true minimum current for a desired torque. Therefore, the control system should compensate the effect of iron loss. This compensation is proposed to achieve by a direct torque control scheme to prevent internal current loops and feedforward compensations. In addition, the Lagrange's theorem is employed to derive an MTPA criterion. It is proven that forcing the criterion to zero, guarantees realization of MTPA strategy. In order to reach these control objectives, a nonlinear control method is designed with two new output, corresponding to electromagnetic torque and the MTPA criterion. Performance of the proposed controller in realization of MTPA and minimization of torque ripple is justified in real-time through simulations and experiments on a 200W outer rotor prototype.
- 21 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (8) , 6692-6700
MTPA Strategy for Direct Torque Control of Brushless DC Motor Drive
In this paper, a high performance maximum torque per Ampere (MTPA) control strategy is proposed for surface-mounted brushless DC (BLDC) motor drive. Most of published works in the literature have not considered the effect of iron loss branch. As will be demonstrated analytically, underestimating the iron loss in the control system of BLDC motor has two undesirable effects. First, it causes torque errors. Second, the MTPA fails to track the true minimum current for a desired torque. Therefore, the control system should compensate the effect of iron loss. This compensation is proposed to achieve by a direct torque control scheme to prevent internal current loops and feedforward compensations. In addition, the Lagrange's theorem is employed to derive an MTPA criterion. It is proven that forcing the criterion to zero, guarantees realization of MTPA strategy. In order to reach these control objectives, a nonlinear control method is designed with two new output, corresponding to electromagnetic torque and the MTPA criterion. Performance of the proposed controller in realization of MTPA and minimization of torque ripple is justified in real-time through simulations and experiments on a 200W outer rotor prototype.
- 24 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (2) , 1194-1199
Real-Time Maximum Torque per Ampere Control of Brushless DC Motor Drive With Minimum Torque Ripple
A nonlinear control scheme is proposed for real-time tracking of maximum torque per Ampere trajectory of the surface mounted brushless DC motor with non-sinusoidal back-EMF. The strategy employs the Lagrange's Theorem to obtain the optimum stator current, at which both torque ripple and corresponding current magnitude become minimized. A new criterion is introduced in such a way that, when forced to zero, guarantees MTPA realization. The input-output feedback linearization (IOFL) control scheme is employed to improve tracking of the applied optimum currents. In the suggested approach, the magnitude of the stator current vector is minimized effectively in each instant. The performance of the control system is validated through experimental results.
- 24 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (2) , 1194-1199
Real-Time Maximum Torque per Ampere Control of Brushless DC Motor Drive With Minimum Torque Ripple
A nonlinear control scheme is proposed for real-time tracking of maximum torque per Ampere trajectory of the surface mounted brushless DC motor with non-sinusoidal back-EMF. The strategy employs the Lagrange's Theorem to obtain the optimum stator current, at which both torque ripple and corresponding current magnitude become minimized. A new criterion is introduced in such a way that, when forced to zero, guarantees MTPA realization. The input-output feedback linearization (IOFL) control scheme is employed to improve tracking of the applied optimum currents. In the suggested approach, the magnitude of the stator current vector is minimized effectively in each instant. The performance of the control system is validated through experimental results.
- 1 March 2019
- Published by Elsevier in ISA Transactions
- Vol. 86, 238-248
Loss model based efficiency optimized control of brushless DC motor drive
- 1 March 2019
- Published by Elsevier in ISA Transactions
- Vol. 86, 238-248
Loss model based efficiency optimized control of brushless DC motor drive