Ogbodo Mark Ikechukwu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ogbodo Mark Ikechukwu has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Abderazek Ben Abdallah
University of Aizu
7 shared publications - Nam Khanh Dang
The University of Aizu
5 shared publications - Jiangkun Wang
The University of Aizu
2 shared publications Abderazek Abdallah
Adaptive Systems Laboratory, Graduate School of Computer Science and Engineering, The University of Aizu, Japan
1 shared publicationFukuchi Tomohide
Adaptive Systems Laboratory, Graduate School of Computer Science and Engineering, The University of Aizu, Japan
1 shared publicationKhanh Dang
Adaptive Systems Laboratory, Graduate School of Computer Science and Engineering, The University of Aizu, Japan
1 shared publication
Latest Publications
- Open Access
- 22 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. PP, 1
Fault-Tolerant Spiking Neural Network Mapping Algorithm and Architecture to 3D-NoC-Based Neuromorphic Systems
Neuromorphic computing uses spiking neuron network models to solve machine learning problems in a more energy-efficient way when compared to conventional artificial neural networks. However, mapping the various network components to the neuromorphic hardware is not trivial to realize the desired model for an actual simulation. Moreover, neurons and synapses could be affected by noise due to external interference or random actions of other components (i.e., neurons), which eventually lead to unreliable results. This work proposes a fault-tolerant spiking neural network mapping algorithm and architecture to a 3D-NoC-based neuromorphic system (R-NASH-II) based on a rank and selection mapping mechanism (RSM). The RSM allows the ranking and rapid selection of neurons for fault-tolerant mapping. Evaluation results show that with our proposed mechanism, we could maintain a mapping efficiency of 100% with 20% spare rate and a fault rate (40%) more than in the previous mapping framework. The Monte Carlo simulation evaluation of reliability shows that the RSM mechanism has increased the MTTF of the previous mapping technique by 43% on average. Furthermore, the operational availability of the RSM for mapping to a 4 × 4 × 4 (smallest) and 6 × 6 × 6 (largest) NoC is 88% and 67% respectively.
- 22 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. PP, 1
Open AccessFault-Tolerant Spiking Neural Network Mapping Algorithm and Architecture to 3D-NoC-Based Neuromorphic Systems
Neuromorphic computing uses spiking neuron network models to solve machine learning problems in a more energy-efficient way when compared to conventional artificial neural networks. However, mapping the various network components to the neuromorphic hardware is not trivial to realize the desired model for an actual simulation. Moreover, neurons and synapses could be affected by noise due to external interference or random actions of other components (i.e., neurons), which eventually lead to unreliable results. This work proposes a fault-tolerant spiking neural network mapping algorithm and architecture to a 3D-NoC-based neuromorphic system (R-NASH-II) based on a rank and selection mapping mechanism (RSM). The RSM allows the ranking and rapid selection of neurons for fault-tolerant mapping. Evaluation results show that with our proposed mechanism, we could maintain a mapping efficiency of 100% with 20% spare rate and a fault rate (40%) more than in the previous mapping framework. The Monte Carlo simulation evaluation of reliability shows that the RSM mechanism has increased the MTTF of the previous mapping technique by 43% on average. Furthermore, the operational availability of the RSM for mapping to a 4 × 4 × 4 (smallest) and 6 × 6 × 6 (largest) NoC is 88% and 67% respectively.
- Open Access
- 13 December 2022
- Published by MDPI AG in Electronics
- Vol. 11 (24) , 4157
Spike-Event X-ray Image Classification for 3D-NoC-Based Neuromorphic Pneumonia Detection
The success of deep learning in extending the frontiers of artificial intelligence has accelerated the application of AI-enabled systems in addressing various challenges in different fields. In healthcare, deep learning is deployed on edge computing platforms to address security and latency challenges, even though these platforms are often resource-constrained. Deep learning systems are based on conventional artificial neural networks, which are computationally complex, require high power, and have low energy efficiency, making them unsuitable for edge computing platforms. Since these systems are also used in critical applications such as bio-medicine, it is expedient that their reliability is considered when designing them. For biomedical applications, the spatio-temporal nature of information processing of spiking neural networks could be merged with a fault-tolerant 3-dimensional network on chip (3D-NoC) hardware to obtain an excellent multi-objective performance accuracy while maintaining low latency and low power consumption. In this work, we propose a reconfigurable 3D-NoC-based neuromorphic system for biomedical applications based on a fault-tolerant spike routing scheme. The performance evaluation results over X-ray images for pneumonia (i.e., COVID-19) detection show that the proposed system achieves 88.43% detection accuracy over the collected test data and could be accelerated to achieve 4.6% better inference latency than the ANN-based system while consuming 32% less power. Furthermore, the proposed system maintains high accuracy for up to 30% inter-neuron communication faults with increased latency.
- 13 December 2022
- Published by MDPI AG in Electronics
- Vol. 11 (24) , 4157
Open AccessSpike-Event X-ray Image Classification for 3D-NoC-Based Neuromorphic Pneumonia Detection
The success of deep learning in extending the frontiers of artificial intelligence has accelerated the application of AI-enabled systems in addressing various challenges in different fields. In healthcare, deep learning is deployed on edge computing platforms to address security and latency challenges, even though these platforms are often resource-constrained. Deep learning systems are based on conventional artificial neural networks, which are computationally complex, require high power, and have low energy efficiency, making them unsuitable for edge computing platforms. Since these systems are also used in critical applications such as bio-medicine, it is expedient that their reliability is considered when designing them. For biomedical applications, the spatio-temporal nature of information processing of spiking neural networks could be merged with a fault-tolerant 3-dimensional network on chip (3D-NoC) hardware to obtain an excellent multi-objective performance accuracy while maintaining low latency and low power consumption. In this work, we propose a reconfigurable 3D-NoC-based neuromorphic system for biomedical applications based on a fault-tolerant spike routing scheme. The performance evaluation results over X-ray images for pneumonia (i.e., COVID-19) detection show that the proposed system achieves 88.43% detection accuracy over the collected test data and could be accelerated to achieve 4.6% better inference latency than the ANN-based system while consuming 32% less power. Furthermore, the proposed system maintains high accuracy for up to 30% inter-neuron communication faults with increased latency.
- 21 September 2022
- Published by Springer Nature
- p. 311-321
Efficient Pneumonia Detection Method and Implementation in Chest X-ray Images Based on a Neuromorphic Spiking Neural Network
- 21 September 2022
- Published by Springer Nature
- p. 311-321
Efficient Pneumonia Detection Method and Implementation in Chest X-ray Images Based on a Neuromorphic Spiking Neural Network
- Open Access
- 13 May 2022
- Published by EDP Sciences in SHS Web of Conferences
- Vol. 139, 03004
An Affordable 3D-printed Open-Loop Prosthetic Hand Prototype with Neural Network Learning EMG-Based Manipulation for Amputees
Despite the advancement of prosthetic hands, many of the conventional products are difficult to control and have limited capabilities. Even though these limitations are being pushed by many state-of-the-art commercial prosthetic hand products, they are often expensive due to the high cost of production. Therefore, in the Adaptive Neuroprosthesis Arm (NeuroSys) project, we aim to develop a low-cost prosthetic hand with high functionalities that let users perform various gestures and accurate grasp. This paper mainly focuses on the sEMG signal recognition and control for a prototype 3D printed prosthetic hand model. In this work, we have considered the prosthetic hand to operate from a non-intrusive sensor, surface Electromyographic signal (sEMG). The signal used to control the prosthetic hand is received from a low-cost, 8-channel sEMG sensor, Myo armband. The sensor is placed around a person’s upper forearm under the elbow, and the signal is sent wirelessly to a computer. After the signal is received, a neural network is used to recognize and classify the intention of the signals. The network model is designed for specific individuals to increase the controllability of the prosthetic hand. Also, to mimic the real-world usage, evaluation on two different sessions is conducted. With the use of Recurrent Neural Networks (RNNs) family, sEMG data recognition can reach around 85% of accuracy. While Gated Recurrent Units (GRUs) and Long Short Term Memory (LSTM) have similar results, simple RNN unit produces very low accuracy. Also, the more session the sample data is taken, the more robust the recognition system can be. Using the Myo armband sensor, sEMG signal data during a steady state with force or no force can affect the accuracy performance of the decoding hand gestures. In terms of real-world usage, however the constant force must be applied, otherwise, the system fails to classify the gestures. Also, the variation of sensor placement can affect the deep learning model. Although, there is a trade-off between accuracy and delay, optimal window size can be explored. Using the mentioned method, a prototype of an affordable 3D printed prosthetic hand controlled using sEMG is realized, although it is still far from real-world usage.
- 13 May 2022
- Published by EDP Sciences in SHS Web of Conferences
- Vol. 139, 03004
Open AccessAn Affordable 3D-printed Open-Loop Prosthetic Hand Prototype with Neural Network Learning EMG-Based Manipulation for Amputees
Despite the advancement of prosthetic hands, many of the conventional products are difficult to control and have limited capabilities. Even though these limitations are being pushed by many state-of-the-art commercial prosthetic hand products, they are often expensive due to the high cost of production. Therefore, in the Adaptive Neuroprosthesis Arm (NeuroSys) project, we aim to develop a low-cost prosthetic hand with high functionalities that let users perform various gestures and accurate grasp. This paper mainly focuses on the sEMG signal recognition and control for a prototype 3D printed prosthetic hand model. In this work, we have considered the prosthetic hand to operate from a non-intrusive sensor, surface Electromyographic signal (sEMG). The signal used to control the prosthetic hand is received from a low-cost, 8-channel sEMG sensor, Myo armband. The sensor is placed around a person’s upper forearm under the elbow, and the signal is sent wirelessly to a computer. After the signal is received, a neural network is used to recognize and classify the intention of the signals. The network model is designed for specific individuals to increase the controllability of the prosthetic hand. Also, to mimic the real-world usage, evaluation on two different sessions is conducted. With the use of Recurrent Neural Networks (RNNs) family, sEMG data recognition can reach around 85% of accuracy. While Gated Recurrent Units (GRUs) and Long Short Term Memory (LSTM) have similar results, simple RNN unit produces very low accuracy. Also, the more session the sample data is taken, the more robust the recognition system can be. Using the Myo armband sensor, sEMG signal data during a steady state with force or no force can affect the accuracy performance of the decoding hand gestures. In terms of real-world usage, however the constant force must be applied, otherwise, the system fails to classify the gestures. Also, the variation of sensor placement can affect the deep learning model. Although, there is a trade-off between accuracy and delay, optimal window size can be explored. Using the mentioned method, a prototype of an affordable 3D printed prosthetic hand controlled using sEMG is realized, although it is still far from real-world usage.
- Open Access
- 13 May 2022
- Published by EDP Sciences in SHS Web of Conferences
- Vol. 139, 03019
Study of a Multi-modal Neurorobotic Prosthetic Arm Control System based on Recurrent Spiking Neural Network
The use of robotic arms in various fields of human endeavor has increased over the years, and with recent advancements in artificial intelligence enabled by deep learning, they are increasingly being employed in medical applications like assistive robots for paralyzed patients with neurological disorders, welfare robots for the elderly, and prosthesis for amputees. However, robot arms tailored towards such applications are resource-constrained. As a result, deep learning with conventional artificial neural network (ANN) which is often run on GPU with high computational complexity and high power consumption cannot be handled by them. Neuromorphic processors, on the other hand, leverage spiking neural network (SNN) which has been shown to be less computationally complex and consume less power, making them suitable for such applications. Also, most robot arms unlike living agents that combine different sensory data to accurately perform a complex task, use uni-modal data which affects their accuracy. Conversely, multi-modal sensory data has been demonstrated to reach high accuracy and can be employed to achieve high accuracy in such robot arms. This paper presents the study of a multi-modal neurorobotic prosthetic arm control system based on recurrent spiking neural network. The robot arm control system uses multi-modal sensory data from visual (camera) and electromyography sensors, together with spike-based data processing on our previously proposed R-NASH neuromorphic processor to achieve robust accurate control of a robot arm with low power. The evaluation result using both uni-modal and multi-modal input data show that the multi-modal input achieves a more robust performance at 87%, compared to the uni-modal.
- 13 May 2022
- Published by EDP Sciences in SHS Web of Conferences
- Vol. 139, 03019
Open AccessStudy of a Multi-modal Neurorobotic Prosthetic Arm Control System based on Recurrent Spiking Neural Network
The use of robotic arms in various fields of human endeavor has increased over the years, and with recent advancements in artificial intelligence enabled by deep learning, they are increasingly being employed in medical applications like assistive robots for paralyzed patients with neurological disorders, welfare robots for the elderly, and prosthesis for amputees. However, robot arms tailored towards such applications are resource-constrained. As a result, deep learning with conventional artificial neural network (ANN) which is often run on GPU with high computational complexity and high power consumption cannot be handled by them. Neuromorphic processors, on the other hand, leverage spiking neural network (SNN) which has been shown to be less computationally complex and consume less power, making them suitable for such applications. Also, most robot arms unlike living agents that combine different sensory data to accurately perform a complex task, use uni-modal data which affects their accuracy. Conversely, multi-modal sensory data has been demonstrated to reach high accuracy and can be employed to achieve high accuracy in such robot arms. This paper presents the study of a multi-modal neurorobotic prosthetic arm control system based on recurrent spiking neural network. The robot arm control system uses multi-modal sensory data from visual (camera) and electromyography sensors, together with spike-based data processing on our previously proposed R-NASH neuromorphic processor to achieve robust accurate control of a robot arm with low power. The evaluation result using both uni-modal and multi-modal input data show that the multi-modal input achieves a more robust performance at 87%, compared to the uni-modal.
- 12 December 2021
- Published by Springer Nature
- p. 225-238
Energy-Efficient Spike-Based Scalable Architecture for Next-Generation Cognitive AI Computing Systems
- 12 December 2021
- Published by Springer Nature
- p. 225-238
Energy-Efficient Spike-Based Scalable Architecture for Next-Generation Cognitive AI Computing Systems
- Open Access
- 5 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 64331-64345
On the Design of a Fault-Tolerant Scalable Three Dimensional NoC-Based Digital Neuromorphic System With On-Chip Learning
Neuromorphic systems have shown improvements over the years, leveraging Spiking neural network’s (SNN) event-driven nature to demonstrate low power consumption. As neuromorphic systems require high integration to form a functional silicon brain-like, moving to 3D integrated circuits (3D-ICs) with three-dimensional network on chip (3D-NoC) interconnect is a suitable approach that allows scalable design, shorter connections, and lower power consumption. However, highly dense neuromorphic systems also encounter the reliability issue where a single point of failure can affect the systems’operation. Because neuromorphic systems rely heavily on spike communication, an interruption or violation in the timing of spike communication can adversely affect the performance and accuracy of a neuromorphic system. This paper presents NASH, a fault-tolerant 3D-NoC based neuromorphic system that incorporates as processing elements, lightweight spiking neuron processing cores (SNPCs) with spike-timing-dependent-plasticity (STDP) on-chip learning. Each SNPC houses 256 leaky integrate-and-fire (LIF) neurons and 65k synapses. Evaluation results on MNIST classification, using the fault-tolerant shortest-path K-means-based multicast routing algorithm (FTSP-KMCR), show that the NASH system can maintain high accuracy for up to 30% permanent fault in the interconnect with an acceptable area and power overheads when compared to other existing systems.
- 5 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 64331-64345
Open AccessOn the Design of a Fault-Tolerant Scalable Three Dimensional NoC-Based Digital Neuromorphic System With On-Chip Learning
Neuromorphic systems have shown improvements over the years, leveraging Spiking neural network’s (SNN) event-driven nature to demonstrate low power consumption. As neuromorphic systems require high integration to form a functional silicon brain-like, moving to 3D integrated circuits (3D-ICs) with three-dimensional network on chip (3D-NoC) interconnect is a suitable approach that allows scalable design, shorter connections, and lower power consumption. However, highly dense neuromorphic systems also encounter the reliability issue where a single point of failure can affect the systems’operation. Because neuromorphic systems rely heavily on spike communication, an interruption or violation in the timing of spike communication can adversely affect the performance and accuracy of a neuromorphic system. This paper presents NASH, a fault-tolerant 3D-NoC based neuromorphic system that incorporates as processing elements, lightweight spiking neuron processing cores (SNPCs) with spike-timing-dependent-plasticity (STDP) on-chip learning. Each SNPC houses 256 leaky integrate-and-fire (LIF) neurons and 65k synapses. Evaluation results on MNIST classification, using the fault-tolerant shortest-path K-means-based multicast routing algorithm (FTSP-KMCR), show that the NASH system can maintain high accuracy for up to 30% permanent fault in the interconnect with an acceptable area and power overheads when compared to other existing systems.
- Open Access
- 8 May 2020
- Published by EDP Sciences in SHS Web of Conferences
- Vol. 77, 04003
Architecture and Design of a Spiking Neuron Processor Core Towards the Design of a Large-scale Event-Driven 3D-NoC-based Neuromorphic Processor
Neuromorphic computing tries to model in hardware the biological brain which is adept at operating in a rapid, real-time, parallel, low power, adaptive and fault-tolerant manner within a volume of 2 liters. Leveraging the event driven nature of Spiking Neural Network (SNN), neuromorphic systems have been able to demonstrate low power consumption by power gating sections of the network not driven by an event at any point in time. However, further exploration in this field towards the building of edge application friendly agents and efficient scalable neuromorphic systems with large number of synapses necessitates the building of small-sized low power spiking neuron processor core with efficient neuro-coding scheme and fault tolerance. This paper presents a spiking neuron processor core suitable for an event-driven Three-Dimensional Network on Chip (3D-NoC) SNN based neuromorphic systems. The spiking neuron Processor core houses an array of leaky integrate and fire (LIF) neurons, and utilizes a crossbar memory in modelling the synapses, all within a chip area of 0.12mm2 and was able to achieves an accuracy of 95.15% on MNIST dataset inference.
- 8 May 2020
- Published by EDP Sciences in SHS Web of Conferences
- Vol. 77, 04003
Open AccessArchitecture and Design of a Spiking Neuron Processor Core Towards the Design of a Large-scale Event-Driven 3D-NoC-based Neuromorphic Processor
Neuromorphic computing tries to model in hardware the biological brain which is adept at operating in a rapid, real-time, parallel, low power, adaptive and fault-tolerant manner within a volume of 2 liters. Leveraging the event driven nature of Spiking Neural Network (SNN), neuromorphic systems have been able to demonstrate low power consumption by power gating sections of the network not driven by an event at any point in time. However, further exploration in this field towards the building of edge application friendly agents and efficient scalable neuromorphic systems with large number of synapses necessitates the building of small-sized low power spiking neuron processor core with efficient neuro-coding scheme and fault tolerance. This paper presents a spiking neuron processor core suitable for an event-driven Three-Dimensional Network on Chip (3D-NoC) SNN based neuromorphic systems. The spiking neuron Processor core houses an array of leaky integrate and fire (LIF) neurons, and utilizes a crossbar memory in modelling the synapses, all within a chip area of 0.12mm2 and was able to achieves an accuracy of 95.15% on MNIST dataset inference.