Mahfouz Saeed
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mahfouz Saeed has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Adnan Kabbani
Electrical Engineering and Computer Science Department, College of Engineering, A’Sharqiyah University, P.O. Box 42, Ibra 400, Oman
3 shared publications - Mohammed Abd El Hameed
Energy and Sustainable Engineering Department, College of Engineering, A’Sharqiyah University, P.O. Box 42, Ibra 400, Oman
3 shared publications - Omar Israel González Peña
Vicerrectoría De Ciencias de la Salud Universidad de Monterrey San Pedro Garza García 66238 Nuevo León Mexico
3 shared publications - Essa Al-Hajri
Energy and Sustainable Engineering Department, College of Engineering, A’Sharqiyah University, P.O. Box 42, Ibra 400, Oman
2 shared publications - Enas Abd El-Hay
Electrical Power and Machines Department, Faculty of Engineering, Zagazig University, Zagazig 44519, Egypt
1 shared publication - Mahmoud M. Elkholy
Electrical Engineering and Computer Science Department, College of Engineering, A’Sharqiyah University, P.O. Box 42, Ibra 400, Oman
1 shared publication
Latest Publications
- Open Access
- 21 August 2026
- Published by MDPI AG in Electrochem
- Vol. 7 (3) , 24
CuInGaSe2 Thin-Film Electrodeposition Developments: A Comprehensive Review
Due to their remarkable long-term stability, variable bandgap, and relatively high absorption coefficient, copper indium gallium diselenide (CIGS) solar devices are among the most promising photovoltaic technologies due to their compatibility with lightweight substrates and special applications. This review critically discusses recent progress in the electrodeposition-based fabrication of CISe/CIGSe absorber layers, with special focus on electrolyte chemistry, electrochemical deposition mechanisms, precursor composition and morphology, post-deposition selenization/sulfurization, absorber quality, and photovoltaic device performance. We discuss aqueous and non-aqueous electrolytes, one-step and sequential electrodeposition, pulse-based deposition techniques, compositional control, film quality enhancement, Cd-free buffer layers, and large-area processing. The issues arising from the varied electrochemical behaviors of Cu, In, Ga, and Se are discussed, with specific emphasis on hydrogen evolution, limited integration of Ga, development of secondary phases, inhomogeneity of precursors, and process reproducibility. We review recent progress in device performance and explain typical manufacturing methods, and we summarise the key criteria for scaled electrodeposition. This review therefore sets up an integrated processing–structure–performance perspective for the further development of efficient and industrially relevant electrodeposited CIGSe solar cells.
- 21 August 2026
- Published by MDPI AG in Electrochem
- Vol. 7 (3) , 24
Open AccessCuInGaSe2 Thin-Film Electrodeposition Developments: A Comprehensive Review
Due to their remarkable long-term stability, variable bandgap, and relatively high absorption coefficient, copper indium gallium diselenide (CIGS) solar devices are among the most promising photovoltaic technologies due to their compatibility with lightweight substrates and special applications. This review critically discusses recent progress in the electrodeposition-based fabrication of CISe/CIGSe absorber layers, with special focus on electrolyte chemistry, electrochemical deposition mechanisms, precursor composition and morphology, post-deposition selenization/sulfurization, absorber quality, and photovoltaic device performance. We discuss aqueous and non-aqueous electrolytes, one-step and sequential electrodeposition, pulse-based deposition techniques, compositional control, film quality enhancement, Cd-free buffer layers, and large-area processing. The issues arising from the varied electrochemical behaviors of Cu, In, Ga, and Se are discussed, with specific emphasis on hydrogen evolution, limited integration of Ga, development of secondary phases, inhomogeneity of precursors, and process reproducibility. We review recent progress in device performance and explain typical manufacturing methods, and we summarise the key criteria for scaled electrodeposition. This review therefore sets up an integrated processing–structure–performance perspective for the further development of efficient and industrially relevant electrodeposited CIGSe solar cells.
- Open Access
Effect of Current Density and Pulse Parameters on the Electrodeposition Quality and Film Properties of CZTS from Diluted Electrolyte
One of the most promising absorber materials for solar applications is copper zinc tin sulfide/selenide (CZTS), which has good optical properties and basic elements that are readily available, affordable, and environmentally acceptable. This study examines how pulse timing and current density affect the electrodeposition of Cu2ZnSnS4/Cu2ZnSn(S,Se)4 (CZTS/CZTSSe) thin films from a diluted electrolyte, including deposition quality, film configuration, elemental composition, crystallinity, and photovoltaic performance. It evaluates the impact of these factors on device performance, film properties, layer’s compactness, surface homogeneity, microcrack-free morphology, compositional homogeneity, crystallinity, and suitability for solar device manufacturing. Using a pulsed-current technique, CZTS precursor layers were electrodeposited in a low-concentration solution with periodic changes in current density of roughly 5.3–5.9 mA/cm2 and pulse-on/off durations of 50/50, 100/100, and 250/250 ms. The deposited precursors were then added to fully built CZTS-based solar cell topologies after sulphurization or selenization. Structural characteristics were analyzed using X-ray diffraction (XRD), and composition and elemental distribution were assessed using energy-dispersive X-ray spectroscopy (EDS). Measurements of transmittance and reflectance were used to evaluate optical properties relevant to photovoltaic performance. In contrast to films deposited at higher current densities and longer off-times, moderate current densities combined with short off-times yield dense, microcrack-free films with improved crystallinity and near-stoichiometric Cu/(Zn + Sn), Zn/Sn, and chalcogen/metal ratios. Additionally, absorber layers with appropriate optical band gaps and improved device performance are produced by these optimized pulse parameters. Overall, the study shows that controlling pulse parameters in diluted electrolytes is a useful tactic for improving the quality of CZTS films and developing low-cost, solution-based fabrication techniques for high-performance CZTS solar cells.
Open AccessEffect of Current Density and Pulse Parameters on the Electrodeposition Quality and Film Properties of CZTS from Diluted Electrolyte
One of the most promising absorber materials for solar applications is copper zinc tin sulfide/selenide (CZTS), which has good optical properties and basic elements that are readily available, affordable, and environmentally acceptable. This study examines how pulse timing and current density affect the electrodeposition of Cu2ZnSnS4/Cu2ZnSn(S,Se)4 (CZTS/CZTSSe) thin films from a diluted electrolyte, including deposition quality, film configuration, elemental composition, crystallinity, and photovoltaic performance. It evaluates the impact of these factors on device performance, film properties, layer’s compactness, surface homogeneity, microcrack-free morphology, compositional homogeneity, crystallinity, and suitability for solar device manufacturing. Using a pulsed-current technique, CZTS precursor layers were electrodeposited in a low-concentration solution with periodic changes in current density of roughly 5.3–5.9 mA/cm2 and pulse-on/off durations of 50/50, 100/100, and 250/250 ms. The deposited precursors were then added to fully built CZTS-based solar cell topologies after sulphurization or selenization. Structural characteristics were analyzed using X-ray diffraction (XRD), and composition and elemental distribution were assessed using energy-dispersive X-ray spectroscopy (EDS). Measurements of transmittance and reflectance were used to evaluate optical properties relevant to photovoltaic performance. In contrast to films deposited at higher current densities and longer off-times, moderate current densities combined with short off-times yield dense, microcrack-free films with improved crystallinity and near-stoichiometric Cu/(Zn + Sn), Zn/Sn, and chalcogen/metal ratios. Additionally, absorber layers with appropriate optical band gaps and improved device performance are produced by these optimized pulse parameters. Overall, the study shows that controlling pulse parameters in diluted electrolytes is a useful tactic for improving the quality of CZTS films and developing low-cost, solution-based fabrication techniques for high-performance CZTS solar cells.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (25) , 1330
Fabrication of ZnO:In Window Layers by Electrodeposition Using a Dilute Electrolyte
Zinc oxide (ZnO), an n-type semiconductor, is a conducting oxide for CIGS thin films. Among other advantageous properties, ZnO also has outstanding stability, remarkable transparency, and high electron mobility 2-4. This paper offers the electrodeposited ZnO layer doped with indium as a top layer, similar to earlier work for creating CIGS solar cells. The electrochemical reaction was carried out at 69 °C using undoped zinc oxide as the substrate. Zn(NO3)2, InCl3, and LiCl as a supporting electrolyte make up the electrolyte. In order to optimise the process parameters, this paper compares DC and pulsed electroplating.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (25) , 1330
Fabrication of ZnO:In Window Layers by Electrodeposition Using a Dilute Electrolyte
Zinc oxide (ZnO), an n-type semiconductor, is a conducting oxide for CIGS thin films. Among other advantageous properties, ZnO also has outstanding stability, remarkable transparency, and high electron mobility 2-4. This paper offers the electrodeposited ZnO layer doped with indium as a top layer, similar to earlier work for creating CIGS solar cells. The electrochemical reaction was carried out at 69 °C using undoped zinc oxide as the substrate. Zn(NO3)2, InCl3, and LiCl as a supporting electrolyte make up the electrolyte. In order to optimise the process parameters, this paper compares DC and pulsed electroplating.
- Open Access
CIGS Electrodeposition from Diluted Electrolyte: Effect of Current Density and Pulse Timing on Deposition Quality and Film Properties
Among the most promising alloys for photovoltaic applications is copper–indium–gallium–selenide (CIGS) because of its enhanced optical properties. This study examines the influence of current density and pulse timing on the electrodeposition of Cu(In, Ga)Se2 (CIGS) thin films from a dilute electrolyte. It assesses how these parameters affect deposition quality, film characteristics, and device performance. CIGS absorber layers were electrodeposited using a pulsed-current method, with systematic variations in current density and pulse on/off durations in a low-concentration solution. The deposited precursors were subsequently selenized and incorporated into fully assembled CIGS solar cell architectures. Structural characteristics were analyzed by X-ray diffraction (XRD), whereas composition and elemental distribution were assessed by energy-dispersive X-ray spectroscopy (EDS). Optical properties pertinent to photovoltaic performance were evaluated through transmittance and reflectance measurements. The results indicate that moderate current densities, when combined with brief off-times, produce dense, microcrack-free films exhibiting enhanced crystallinity and near-stoichiometric Cu/(In + Ga) and Ga/(In + Ga) ratios, in contrast to films deposited at higher current densities and extended off-times. These optimized pulse parameters also produce absorber layers with advantageous optical band gaps and improved device performance. Overall, the study demonstrates that regulating pulse parameters in attenuated electrolytes is an effective strategy to optimize CIGS film quality and to facilitate the advancement of economical, solution-based fabrication methods for high-performance CIGS solar cells.
Open AccessCIGS Electrodeposition from Diluted Electrolyte: Effect of Current Density and Pulse Timing on Deposition Quality and Film Properties
Among the most promising alloys for photovoltaic applications is copper–indium–gallium–selenide (CIGS) because of its enhanced optical properties. This study examines the influence of current density and pulse timing on the electrodeposition of Cu(In, Ga)Se2 (CIGS) thin films from a dilute electrolyte. It assesses how these parameters affect deposition quality, film characteristics, and device performance. CIGS absorber layers were electrodeposited using a pulsed-current method, with systematic variations in current density and pulse on/off durations in a low-concentration solution. The deposited precursors were subsequently selenized and incorporated into fully assembled CIGS solar cell architectures. Structural characteristics were analyzed by X-ray diffraction (XRD), whereas composition and elemental distribution were assessed by energy-dispersive X-ray spectroscopy (EDS). Optical properties pertinent to photovoltaic performance were evaluated through transmittance and reflectance measurements. The results indicate that moderate current densities, when combined with brief off-times, produce dense, microcrack-free films exhibiting enhanced crystallinity and near-stoichiometric Cu/(In + Ga) and Ga/(In + Ga) ratios, in contrast to films deposited at higher current densities and extended off-times. These optimized pulse parameters also produce absorber layers with advantageous optical band gaps and improved device performance. Overall, the study demonstrates that regulating pulse parameters in attenuated electrolytes is an effective strategy to optimize CIGS film quality and to facilitate the advancement of economical, solution-based fabrication methods for high-performance CIGS solar cells.
- Open Access
- 17 December 2025
- Published by MDPI AG in Electrochem
- Vol. 6 (4) , 45
Experimental-Based Optimal Parameter Extraction for PEM Fuel Cell Semi-Empirical Model Using the Cloud Drift Optimization Algorithm
Accurate modeling of proton exchange membrane fuel cells (PEMFCs) is essential for predicting system performance under diverse operating conditions. This study introduces a refined semi-empirical modeling that combines experimental validation with an enhanced parameter estimation method based on the Cloud Drift Optimization (CDO) algorithm. The approach focuses on identifying seven key parameters of the nonlinear PEMFC model by minimizing the difference between experimentally measured and simulated cell voltages. To assess its effectiveness, the proposed CDO-based estimator was compared with several established metaheuristic algorithms, including the particle swarm optimizer and the tetragonula carbonaria optimization algorithm. The evaluation was performed using three commercial PEMFC stacks rated at 250 W, 500 W, and the NedStack PS6, as well as experimental data obtained from the Renewable Energy Laboratory at A’Sharqiyah University. Results demonstrate that the CDO algorithm consistently produced the lowest sum of squared errors (SSE) of 1.0337 and exhibited stable convergence across multiple independent runs with a standard deviation of 1.2114 × 10−7. Its reliable performance under both normal and degraded conditions confirms the algorithm’s robustness and adaptability, establishing CDO as an efficient and dependable technique for PEMFC modeling and parameter identification.
- 17 December 2025
- Published by MDPI AG in Electrochem
- Vol. 6 (4) , 45
Open AccessExperimental-Based Optimal Parameter Extraction for PEM Fuel Cell Semi-Empirical Model Using the Cloud Drift Optimization Algorithm
Accurate modeling of proton exchange membrane fuel cells (PEMFCs) is essential for predicting system performance under diverse operating conditions. This study introduces a refined semi-empirical modeling that combines experimental validation with an enhanced parameter estimation method based on the Cloud Drift Optimization (CDO) algorithm. The approach focuses on identifying seven key parameters of the nonlinear PEMFC model by minimizing the difference between experimentally measured and simulated cell voltages. To assess its effectiveness, the proposed CDO-based estimator was compared with several established metaheuristic algorithms, including the particle swarm optimizer and the tetragonula carbonaria optimization algorithm. The evaluation was performed using three commercial PEMFC stacks rated at 250 W, 500 W, and the NedStack PS6, as well as experimental data obtained from the Renewable Energy Laboratory at A’Sharqiyah University. Results demonstrate that the CDO algorithm consistently produced the lowest sum of squared errors (SSE) of 1.0337 and exhibited stable convergence across multiple independent runs with a standard deviation of 1.2114 × 10−7. Its reliable performance under both normal and degraded conditions confirms the algorithm’s robustness and adaptability, establishing CDO as an efficient and dependable technique for PEMFC modeling and parameter identification.
- Open Access
- 27 October 2025
- Published by MDPI AG in Electrochem
- Vol. 6 (4) , 38
Water Management Strategies for Proton Exchange Membrane Fuel Cells: A Comprehensive Review
Proton exchange membrane fuel cells (PEMFCs) are a promising clean energy technology due to their zero gas emissions, low operating temperature, and high efficiency. This review synthesizes research from 2015–2025 on (i) materials-level approaches (advanced/modified PFSA membranes and composite membranes) that improve water retention and ionic conduction, (ii) engineered gas diffusion layers and hydrophobic/hydrophilic gradients (including Janus and asymmetric GDL architectures) that facilitate directional water transport and have been shown to increase peak power density in some reports (e.g., from ≈1.17 to ≈1.89 W·cm−2 with Janus GDL designs), (iii) flow-field design strategies. This review examines the key aspects of water management in PEMFCs, including their impact on cell performance, the underlying causes of related issues, and the mechanisms of water transport within these cells. Additionally, it discusses the methods and materials used to enhance water management, highlighting recent advancements and potential directions for future research. Topics such as water transport, water flooding, and water control strategies in PEMFCs are also addressed. Both excess water (flooding) and water depletion (dehydration) can negatively influence fuel cell performance and lifespan. Particular attention is given to water dehydration, with a detailed discussion of its effects on the cathode, Anode, gas diffusion layer, catalyst layer, and flow channels.
- 27 October 2025
- Published by MDPI AG in Electrochem
- Vol. 6 (4) , 38
Open AccessWater Management Strategies for Proton Exchange Membrane Fuel Cells: A Comprehensive Review
Proton exchange membrane fuel cells (PEMFCs) are a promising clean energy technology due to their zero gas emissions, low operating temperature, and high efficiency. This review synthesizes research from 2015–2025 on (i) materials-level approaches (advanced/modified PFSA membranes and composite membranes) that improve water retention and ionic conduction, (ii) engineered gas diffusion layers and hydrophobic/hydrophilic gradients (including Janus and asymmetric GDL architectures) that facilitate directional water transport and have been shown to increase peak power density in some reports (e.g., from ≈1.17 to ≈1.89 W·cm−2 with Janus GDL designs), (iii) flow-field design strategies. This review examines the key aspects of water management in PEMFCs, including their impact on cell performance, the underlying causes of related issues, and the mechanisms of water transport within these cells. Additionally, it discusses the methods and materials used to enhance water management, highlighting recent advancements and potential directions for future research. Topics such as water transport, water flooding, and water control strategies in PEMFCs are also addressed. Both excess water (flooding) and water depletion (dehydration) can negatively influence fuel cell performance and lifespan. Particular attention is given to water dehydration, with a detailed discussion of its effects on the cathode, Anode, gas diffusion layer, catalyst layer, and flow channels.
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (35) , 1672
Electrodeposition of Doped ZnO Layer (ZnO-In) Window Layer for Thin Solid Films
Zinc oxide (ZnO), an n-type semiconductor, is a conducting oxide for CIGS thin solid films. ZnO has outstanding stability, remarkable transparency, and high electron mobility, among other advantages [1-2]. This paper offers the electrodeposited ZnO layer doped with indium as a top layer, similar to earlier work for creating CIGS solar cells [1]. The electrochemical reaction was conducted at 72 °C using undoped zinc oxide as the substrate. Zn(NO3)2, InCl3, and LiCl serve as a supporting electrolyte in the electrolyte. This work aims to optimize the process parameters by comparing DC and pulsed electroplating [1-4]. We created and assessed complete electrodeposited devices with quantum efficiencies higher than 0.66 and efficiencies between 3.4 and 7.6%. This paper provides the electrochemical behavior and agitation impacts on the chemical composition of the doped ZnO layer. The peeling test determines the deposit's adherence to the substrate. Sample polarization curves at different electrode rotation speeds are provided for the indium-doped ZnO layers (figure 1). The final composition, oxide concentrations, crystallography, and oxide effects on the deposit were determined using XRD and the energy-dispersive X-ray spectroscopy technique (EDS) (figure 2). A profilometer was used to determine the deposit's thickness. References [1] Saeed, M. Peña,.G. Nanomaterials 2021, 11, 911. [2] Tran, M.H.; Cho, J.Y.; Sinha, S.; Gang, M.G.; Heo, J. Thin Solid Films 2018, 661, 132–136. [3] Machado, G. Guerra, D. Leinen, J. Ramos-Barrado, R. Marotti, A.Dalchiele, Thin Solid Films 490 (2005) 124 – 131.4 – 131. [4] Fujimoto, K.; Oku, T.; Akiyama, T.; Suzuki, A. J. Phys. Conf. Ser. 2013, 433, 012024 Figure 1
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (35) , 1672
Electrodeposition of Doped ZnO Layer (ZnO-In) Window Layer for Thin Solid Films
Zinc oxide (ZnO), an n-type semiconductor, is a conducting oxide for CIGS thin solid films. ZnO has outstanding stability, remarkable transparency, and high electron mobility, among other advantages [1-2]. This paper offers the electrodeposited ZnO layer doped with indium as a top layer, similar to earlier work for creating CIGS solar cells [1]. The electrochemical reaction was conducted at 72 °C using undoped zinc oxide as the substrate. Zn(NO3)2, InCl3, and LiCl serve as a supporting electrolyte in the electrolyte. This work aims to optimize the process parameters by comparing DC and pulsed electroplating [1-4]. We created and assessed complete electrodeposited devices with quantum efficiencies higher than 0.66 and efficiencies between 3.4 and 7.6%. This paper provides the electrochemical behavior and agitation impacts on the chemical composition of the doped ZnO layer. The peeling test determines the deposit's adherence to the substrate. Sample polarization curves at different electrode rotation speeds are provided for the indium-doped ZnO layers (figure 1). The final composition, oxide concentrations, crystallography, and oxide effects on the deposit were determined using XRD and the energy-dispersive X-ray spectroscopy technique (EDS) (figure 2). A profilometer was used to determine the deposit's thickness. References [1] Saeed, M. Peña,.G. Nanomaterials 2021, 11, 911. [2] Tran, M.H.; Cho, J.Y.; Sinha, S.; Gang, M.G.; Heo, J. Thin Solid Films 2018, 661, 132–136. [3] Machado, G. Guerra, D. Leinen, J. Ramos-Barrado, R. Marotti, A.Dalchiele, Thin Solid Films 490 (2005) 124 – 131.4 – 131. [4] Fujimoto, K.; Oku, T.; Akiyama, T.; Suzuki, A. J. Phys. Conf. Ser. 2013, 433, 012024 Figure 1
- Open Access
Enhancing Performance of PEM Fuel Cell Powering SRM System Using Metaheuristic Optimization
This paper introduces an effective method to improve the performance of a proton exchange membrane fuel cell (PEMFC) system powering a switched reluctance motor (SRM). Problems arise in this system due to the inherent torque and current ripples of the SRM, which result from its saliency and nonlinear magnetic characteristics. Another cause for these ripples is the unsmoothed DC voltage applied to the SRM caused by the switching operations of the DC-DC converter. These ripples are reflected in the PEMFC, leading to more losses and a reduced lifespan. Key parameters that can help mitigate torque and current ripples include the appropriate turn-on and turn-off angles of the SRM phases, as well as the DC-link voltage controller gains. This paper investigates three objectives to compare their effects on the PEMFC system: the SRM torque ripple factor, the DC-link voltage ripple factor, and the PEMFC current ripple factor. These objectives are optimized individually using the single-objective particle swarm and stochastic fractal search algorithms. Additionally, the multi-objective Lichtenberg and multi-objective Dragonfly algorithms are applied to optimize the three objectives concurrently. The optimal decision parameters are obtained from the Pareto front solution using the technique of the order of preference by similarity to the ideal solution method. The final results demonstrate that significant enhancement in the PEMFC current ripples and DC-link voltage ripples can be achieved by appropriately selecting the decision parameters using any proposed objective.
Open AccessEnhancing Performance of PEM Fuel Cell Powering SRM System Using Metaheuristic Optimization
This paper introduces an effective method to improve the performance of a proton exchange membrane fuel cell (PEMFC) system powering a switched reluctance motor (SRM). Problems arise in this system due to the inherent torque and current ripples of the SRM, which result from its saliency and nonlinear magnetic characteristics. Another cause for these ripples is the unsmoothed DC voltage applied to the SRM caused by the switching operations of the DC-DC converter. These ripples are reflected in the PEMFC, leading to more losses and a reduced lifespan. Key parameters that can help mitigate torque and current ripples include the appropriate turn-on and turn-off angles of the SRM phases, as well as the DC-link voltage controller gains. This paper investigates three objectives to compare their effects on the PEMFC system: the SRM torque ripple factor, the DC-link voltage ripple factor, and the PEMFC current ripple factor. These objectives are optimized individually using the single-objective particle swarm and stochastic fractal search algorithms. Additionally, the multi-objective Lichtenberg and multi-objective Dragonfly algorithms are applied to optimize the three objectives concurrently. The optimal decision parameters are obtained from the Pareto front solution using the technique of the order of preference by similarity to the ideal solution method. The final results demonstrate that significant enhancement in the PEMFC current ripples and DC-link voltage ripples can be achieved by appropriately selecting the decision parameters using any proposed objective.
- 2 November 2024
- Published by Springer Nature in Journal of Applied Electrochemistry
- Vol. 55 (4) , 943-955
Cu(In, Ga)(S, Se)2 electrodeposition and characterizations using improved electrolytes
- 2 November 2024
- Published by Springer Nature in Journal of Applied Electrochemistry
- Vol. 55 (4) , 943-955
Cu(In, Ga)(S, Se)2 electrodeposition and characterizations using improved electrolytes
- Open Access
- 29 August 2024
- Published by MDPI AG in Electrochem
- Vol. 5 (3) , 354-369
Introducing a Dilute Single Bath for the Electrodeposition of Cu2(ZnSn)(S)4 for Smooth Layers
Cu2(ZnSn)(S)4 (copper, zinc, tin, and sulfide (CZTS)) provides possible advantages over CuInGaSe2 for thin-film photovoltaic devices because it has a higher band gap. Preparing CZTS by electrodeposition because of its high productivity and lower processing costs, electroplating is appealing. Recently published studies reported that the electrodeposition process of CZTS still faces significant obstacles, such as the sulfur atomic ratio (about half of the whole alloy), deposits’ adhesion, film quality, and optical properties. This work introduces an improved bath that facilitates the direct electroplating of CZTS from one processing step. The precursors used were significantly more diluted than the typical baths mentioned in the last few years. An extensive analysis of the electrochemical behavior at various rotation speeds is presented at room temperature (~22 °C). The deposited alloy’s composition and adherence to the molybdenum back contact are examined with agitation. The annealing process was carried out in an environment containing sulfur, and the metal was not added at this stage. The ultimate sulfur composition was adjusted to 50.2%, about the desired atomic ratio. The compound’s final composition was investigated using the Energy-Dispersive X-ray Spectroscopy technique. Finally, X-ray diffraction analysis was applied to analyze CZTS crystallography and to measure thickness.
- 29 August 2024
- Published by MDPI AG in Electrochem
- Vol. 5 (3) , 354-369
Open AccessIntroducing a Dilute Single Bath for the Electrodeposition of Cu2(ZnSn)(S)4 for Smooth Layers
Cu2(ZnSn)(S)4 (copper, zinc, tin, and sulfide (CZTS)) provides possible advantages over CuInGaSe2 for thin-film photovoltaic devices because it has a higher band gap. Preparing CZTS by electrodeposition because of its high productivity and lower processing costs, electroplating is appealing. Recently published studies reported that the electrodeposition process of CZTS still faces significant obstacles, such as the sulfur atomic ratio (about half of the whole alloy), deposits’ adhesion, film quality, and optical properties. This work introduces an improved bath that facilitates the direct electroplating of CZTS from one processing step. The precursors used were significantly more diluted than the typical baths mentioned in the last few years. An extensive analysis of the electrochemical behavior at various rotation speeds is presented at room temperature (~22 °C). The deposited alloy’s composition and adherence to the molybdenum back contact are examined with agitation. The annealing process was carried out in an environment containing sulfur, and the metal was not added at this stage. The ultimate sulfur composition was adjusted to 50.2%, about the desired atomic ratio. The compound’s final composition was investigated using the Energy-Dispersive X-ray Spectroscopy technique. Finally, X-ray diffraction analysis was applied to analyze CZTS crystallography and to measure thickness.