PNPh. Nicolai

Ph. Nicolai

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ph. Nicolai has a total of 190 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Erratum: “Hot-electron generation in high-intensity laser–matter experiments with copper targets” [Matter Radiat. Extremes 10, 037403 (2025)]

    by O. Renner, O. Klimo, M. Krus, Ph. Nicolaï, A. Poletaeva, N. Bukharskii, E. Filippov, A. S. Martynenko, D. Batani, V. T. Tikhonchuk

  • Numerical investigation of laser-driven proton bunching with multi-species CH targets using high-energy, long-pulse lasers

    by M. Huault, D. Raffestin, Y. Arikawa, M. Bardon, E. D'HUmieres, H. Larreur, D. Molloy, A. Morace, D. Singappuli, V. T. Tikhonchuk, et al.

    This paper reports a numerical study based on previously published experiments with high-power laser systems, in which high-energy bunches were observed in proton spectra. In these experiments, thin targets were irradiated with hundreds of joules and pulse durations of several hundred femtoseconds. We carried out a simulation campaign combining hydrodynamic and particle-in-cell codes to analyze the origin of the proton energy bunch. The study demonstrates how laser parameters, target thickness, and ionization dynamics influence proton bunch formation. Possible acceleration mechanisms were explored, and the role of a Coulomb piston of highly ionized carbon ions in shaping the proton spectrum within the target normal sheath acceleration regime is demonstrated.

  • Open Access

    Enhanced proton–boron fusion yield with advanced target geometries under direct laser illumination

    by C. Caizergues, E. D'HUmières, D. Raffestin, M. Tosca, L. Giuffrida, A. Morace, D. Batani, Ph. D. Nicolaï

    Laser-driven fusion reactions for the development of bright particle sources or the production of short-lived isotopes remain an active research theme. We propose a comprehensive analysis and a fast modeling approach to highlight optimization strategies on the fusion yields stemming from advanced target designs. Particle-in-cell simulations were supplemented with an inline Monte Carlo approach to evaluate the proton–boron fusion events under direct laser illumination for planar and spherical target geometries. The time evolution and the spatial localization of the nuclear reactions are systematically compared to reveal a multi-phase mechanism in the folded geometries. For both architectures, a shared initial phase of fusion occurs in the laser spot vicinity, following from ions accelerated by the laser radiation pressure forward into the target. Meanwhile, the circulation of hot electrons issued from the laser-plasma interaction leads to the development of sheath fields along the target walls. In a closed geometry, the corresponding accelerated ions may be directed toward dense parts of the target, significantly increasing the number of created α-particles. We analyze the energy distribution of the ion populations issued from the different acceleration mechanisms and assess the corresponding efficiencies in the fusion processes. The use of a double cavity allows for further exploitation of the sheath field acceleration, raising the α yield almost an order of magnitude higher than for the planar case.


  • Open Access

    Laser–plasma instabilities driven by 1 ω0 pulses at shock ignition conditions

    by B. Gosling, T. D. Arber, G. Cristoforetti, P. Nicolaï, L. A. Gizzi

    Recent experiments using 1ω0 (λ0=1.314 μm) laser pulses at the PALS facility have demonstrated the excitation of multiple parametric instabilities. At peak intensities (I∼1016 W cm−2), the combination of high irradiance (Iλ2) and electron temperatures (∼ 3–4 keV) creates plasma conditions relevant to shock ignition. We present two-dimensional particle-in-cell simulations of laser–plasma instabilities at both low (∼1015 W cm−2) and high (∼1016 W cm−2) intensities. The simulations incorporate flow, density, and temperature profiles obtained from hydrodynamic modeling, as well as the effects of Coulomb collisions. In both regimes, stimulated Brillouin scattering emerges as the primary mechanism for backscattered electromagnetic radiation. At low intensity, two-plasmon decay (TPD) drives electron plasma wave activity, while stimulated Raman scattering (SRS) is suppressed by the short density scale length (Ln), limiting convective gain. At higher intensity, the onset of laser beam filamentation leads to a reduction in TPD activity, while the increased Ln facilitates the excitation of SRS within the resulting filaments. The resulting hot-electron populations follow thermal-like distributions with effective temperatures ranging between 17 and 37 keV with respect to laser intensity. The fraction of laser energy converted into electrons with E>100 keV increases from 0.2% to 0.7% between low and high intensity. In the low-intensity regime, resonance absorption near the critical density also enhances the hot-electron flux at the simulation boundary, especially for electrons with E≤100 keV. This contribution diminishes at higher intensities, where SRS near the quarter-critical density becomes the dominant source of hot-electron generation.


  • Open Access

    Investigation of ruling parameters on the growth of side and back stimulated Raman scattering in inhomogeneous plasmas at shock ignition laser intensity

    by G. Cristoforetti, E. Hume, S. Agarwal, D. Batani, M. Cervenak, P. Devi, R. Dudzak, D. Ettel, P. Gajdos, K. Glize, et al.

    Recent experiments at the National Ignition Facility and theoretical modeling suggest that side stimulated Raman scattering (SSRS) instability could reduce laser–plasma coupling and generate considerable fluxes of suprathermal hot electrons under interaction conditions envisaged for direct-drive schemes for inertial confinement fusion. Nonetheless, SSRS remains to date one of the least understood parametric instabilities. Here, we report the first angularly and spectrally resolved measurements of scattered light at laser intensities relevant for the shock ignition scheme (I ∼ 1016 W/cm2), showing significant SSRS growth in the direction perpendicular to the laser polarization. Modification of the focal spot shape and orientation, obtained by using two different random phase plates, and of the density gradient of the plasma, by utilizing exploding foil targets of different thicknesses, clearly reveals a different dependence of backward SRS (BSRS) and SSRS on experimental parameters. While convective BSRS scales with plasma density scale length, as expected by linear theory, the growth of SSRS depends on the spot extension in the direction perpendicular to laser polarization. Our analysis therefore demonstrates that under current experimental conditions, with density scale lengths Ln ≈ 60–120 μm and spot sizes FWHM ≈ 40–100 μm, SSRS is limited by laser beam size rather than by the density scale length of the plasma.


  • Open Access

    Experimental investigation of the density-scale-length effects on laser–plasma instabilities toward the shock-ignition scheme in direct-drive inertial-confinement fusion

    by C. Nakatsuji, K. Kawasaki, T. Idesaka, S. Matsuura, D. Tanaka, T. Sato, H. Nagatomo, Y. Sentoku, Y. Takagi, G. Cristoforetti, et al.

    In direct-drive inertial-confinement fusion, understanding and controlling laser–plasma instabilities (LPIs) is crucial to optimizing energy coupling and achieving high-gain fusion. Herein, we report the experimental investigation of the effects of density scale-length on LPIs. The experiment was performed at the GEKKO-XII Laser facility [C. Yamanaka et al., IEEE J. Quantum Electron. 17, 1639 (1981)], specifically to characterize stimulated Raman scattering (SRS) and two-plasmon decay (TPD), and the effects of density scale-lengths on the relationship between these LPIs and hot-electron generation. The experimental results consistently indicate that the reduction in hot-electron generation with increasing density scale-length is strongly correlated with decreases in both SRS and TPD in high-density regions. Rosenbluth gain analysis implies that pump depletion by stimulated Brillouin scattering is not responsible for the observed reduction in SRS and TPD. Instead, spatial and temporal incoherence of propagating laser beams, driven by filamentation, could have suppressed SRS and TPD, as evaluated by filamentation figure of merit (FFOM). On the other hand, the thermally corrected FFOM suggests that hot spots by random phase plates are the origin of the early growth of SRS in low-density regions.


  • Open Access

    Hot-electron generation in high-intensity laser–matter experiments with copper targets

    by O. Renner, O. Klimo, M. Krus, Ph. Nicolaï, A. Poletaeva, N. Bukharskii, V. T. Tikhonchuk

    We investigate the spatial and temporal correlations of hot-electron generation in high-intensity laser interaction with massive and thin copper targets under conditions relevant to inertial confinement fusion. Using Kα time-resolved imaging, it is found that in the case of massive targets, the hot-electron generation follows the laser pulse intensity with a short delay needed for favorable plasma formation. Conversely, a significant delay in the x-ray emission compared with the laser pulse intensity profile is observed in the case of thin targets. Theoretical analysis and numerical simulations suggest that this is related to radiation preheating of the foil and the increase in hot-electron lifetime in a hot expanding plasma.


  • Open Access

    Laser-initiated p–11B fusion reactions in petawatt high-repetition-rate laser facilities

    by M. Scisciò, G. Petringa, Z. Zhu, M. R. D. Rodrigues, M. Alonzo, P. L. Andreoli, F. Filippi, M. Huault, D. Raffestin, D. Molloy, et al.

    Driving of the nuclear fusion reaction p + 11B → 3α + 8.7 MeV under laboratory conditions by interaction between high-power laser pulses and matter has become a popular field of research, owing to its numerous potential applications: as an alternative to deuterium–tritium for fusion energy production, astrophysics studies, and alpha-particle generation for medical treatment. One possible scheme for laser-driven p–11B reactions is to direct a beam of laser-accelerated protons onto a boron (B) sample (the so-called “pitcher-catcher” scheme). This technique has been successfully implemented on large high-energy lasers, yielding hundreds of joules per shot at low repetition. We present here a complementary approach, exploiting the high repetition rate of the VEGA III petawatt laser at CLPU (Spain), aiming at accumulating results from many interactions at much lower energy, to provide better control of the parameters and the statistics of the measurements. Despite a moderate energy per pulse, our experiment allowed exploration of the laser-driven fusion process with tens (up to hundreds) of laser shots. The experiment provided a clear signature of the reactions involved and of the fusion products, accumulated over many shots, leading to an improved optimization of the diagnostics for experimental campaigns of this type. In this paper, we discuss the effectiveness of laser-driven p–11B fusion in the pitcher–catcher scheme, at a high repetition rate, addressing the challenges of this experimental scheme and highlighting its critical aspects. Our proposed methodology allows evaluation of the performance of this scheme for laser-driven alpha particle production and can be adapted to high-repetition-rate laser facilities with higher energy and intensity.


  • Open Access

    Experimental and computational evaluation of alpha particle production from laser-driven proton–boron nuclear reaction in hole-boring scheme

    by M. Huault, T. Carrière, H. Larreur, Ph. Nicolaï, D. Raffestin, D. Singappuli, E. D'HUmieres, D. Dubresson, K. Batani, M. Cipriani, et al.

    The majority of studies on laser-driven proton–boron nuclear reaction is based on the measurement of α-particles with solid-state nuclear tracks detector (Cr39). However, Cr39's interpretation is difficult due to the presence of several other accelerated particles which can bias the analysis. Furthermore, in some laser irradiation geometries, cross-checking measurements are almost impossible. In this case, numerical simulations can play a very important role in supporting the experimental analysis. In our work, we exploited different laser irradiation schemes (pitcher–catcher and direct irradiation) during the same experimental campaign, and we performed numerical analysis, allowing to obtain conclusive results on laser-driven proton–boron reactions. A direct comparison of the two laser irradiation schemes, using the same laser parameters is presented.


  • Open Access

    Radioisotope production using lasers: From basic science to applications

    by M. R. D. Rodrigues, A. Bonasera, M. Scisciò, J. A. Pérez-Hernández, M. Ehret, F. Filippi, P. L. Andreoli, M. Huault, H. Larreur, D. Singappuli, et al.

    The discovery of chirped pulse amplification has led to great improvements in laser technology, enabling energetic laser beams to be compressed to pulse durations of tens of femtoseconds and focused to a few micrometers. Protons with energies of tens of MeV can be accelerated using, for instance, target normal sheath acceleration and focused on secondary targets. Under such conditions, nuclear reactions can occur, with the production of radioisotopes suitable for medical application. The use of high-repetition lasers to produce such isotopes is competitive with conventional methods mostly based on accelerators. In this paper, we study the production of 67Cu, 63Zn, 18F, and 11C, which are currently used in positron emission tomography and other applications. At the same time, we study the reactions 10B(p,α)7Be and 70Zn(p,4n)67Ga to put further constraints on the proton distributions at different angles, as well as the reaction 11B(p,α)8Be relevant for energy production. The experiment was performed at the 1 PW laser facility at Vega III in Salamanca, Spain. Angular distributions of radioisotopes in the forward (with respect to the laser direction) and backward directions were measured using a high purity germanium detector. Our results are in reasonable agreement with numerical estimates obtained following the approach of Kimura and Bonasera [Nucl. Instrum. Methods Phys. Res., Sect. A 637, 164–170 (2011)].