Juha Oksanen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Juha Oksanen has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Olli Dahl
Department of Bioproducts and Biosystems, School of Chemical Engineering, Aalto University, Vuorimiehentie 1, 02150 Espoo, Finland
3 shared publications Jaakko Heikkinen
Management and Production of Renewable Resources, Natural Resources Institute Finland, Jokioinen, Finland
2 shared publicationsJanne Kaseva
Management and Production of Renewable Resources, Natural Resources Institute Finland, Jokioinen, Finland
2 shared publicationsKimmo Rasa
Management and Production of Renewable Resources, Natural Resources Institute Finland, Jokioinen, Finland
2 shared publicationsRiikka Keskinen
Management and Production of Renewable Resources, Natural Resources Institute Finland, Jokioinen, Finland
2 shared publicationsElijah Adesanya
Fibre and Particle Engineering Research Unit, University of Oulu, Erkki Koiso-Kanttilan katu 5, 90570, Oulu, Finland
1 shared publication
Latest Publications
- Open Access
- 26 May 2026
- Published by Elsevier in Resources, Conservation and Recycling
- Vol. 233
Agricultural use or combustion: Life cycle assessment of pulp and paper industry sludge treatment practices
- 26 May 2026
- Published by Elsevier in Resources, Conservation and Recycling
- Vol. 233
Open AccessAgricultural use or combustion: Life cycle assessment of pulp and paper industry sludge treatment practices
- Open Access
- 21 June 2023
- Published by Elsevier in Journal of Building Engineering
- Vol. 76
Alternative alkali activator from pulp mill waste – One-part blast furnace slag mortar activated with recovery boiler fly ash
- 21 June 2023
- Published by Elsevier in Journal of Building Engineering
- Vol. 76
Open AccessAlternative alkali activator from pulp mill waste – One-part blast furnace slag mortar activated with recovery boiler fly ash
- Open Access
- 1 March 2023
- Published by Walter de Gruyter GmbH in Ecological Chemistry and Engineering S
- Vol. 30 (1) , 63-78
Fertiliser Properties of Wastewater Sludge and Sludge Ash - A Case Study from the Finnish Forest Industry
In this case study we compared the fertiliser properties of an industrial wastewater treatment sludge and a sludge ash to the requirements of the Finnish Fertiliser Product Decree. The sludge was obtained from the activated sludge wastewater treatment plant of a Finnish non-integrated pulp mill. The sludge was furthermore incinerated at a laboratory in a muffle furnace (850 °C) to obtain sludge ash. The total Cd (4.9 mg/kg d.m.) concentration in the pulp sludge exceeded the Finnish limit value (1.5 mg/kg d.m.) for fertiliser products used in agriculture. In the sludge ash, the total concentration of Cd (39 mg/kg; d.m.) exceeded the Finnish limit value (25 mg/kg d.m.) for ash fertilisers used in forestry. These results restrict the potential reuse options of these residues. However, from the utilisation point of view, the enrichment of essential plant macro-nutrients was most notable, resulting to the following total concentrations of these elements in the sludge ash: P (26,000 mg/kg d.m.), S (40,000 mg/kg d.m.), K (11,000 mg/kg d.m.), Ca (83,000 mg/kg d.m.) and Mg (10,000 mg/kg d.m.). Therefore, we conclude that, the converting of sludge into ash may promote the reuse of this wastewater treatment residue to a more value-adding fertiliser by-product to be used as a soil improver and growing medium in landscaping or landfills sites or other closed industrial areas, where heavy metal limit values for fertilisers are not applied in Finland.
- 1 March 2023
- Published by Walter de Gruyter GmbH in Ecological Chemistry and Engineering S
- Vol. 30 (1) , 63-78
Open AccessFertiliser Properties of Wastewater Sludge and Sludge Ash - A Case Study from the Finnish Forest Industry
In this case study we compared the fertiliser properties of an industrial wastewater treatment sludge and a sludge ash to the requirements of the Finnish Fertiliser Product Decree. The sludge was obtained from the activated sludge wastewater treatment plant of a Finnish non-integrated pulp mill. The sludge was furthermore incinerated at a laboratory in a muffle furnace (850 °C) to obtain sludge ash. The total Cd (4.9 mg/kg d.m.) concentration in the pulp sludge exceeded the Finnish limit value (1.5 mg/kg d.m.) for fertiliser products used in agriculture. In the sludge ash, the total concentration of Cd (39 mg/kg; d.m.) exceeded the Finnish limit value (25 mg/kg d.m.) for ash fertilisers used in forestry. These results restrict the potential reuse options of these residues. However, from the utilisation point of view, the enrichment of essential plant macro-nutrients was most notable, resulting to the following total concentrations of these elements in the sludge ash: P (26,000 mg/kg d.m.), S (40,000 mg/kg d.m.), K (11,000 mg/kg d.m.), Ca (83,000 mg/kg d.m.) and Mg (10,000 mg/kg d.m.). Therefore, we conclude that, the converting of sludge into ash may promote the reuse of this wastewater treatment residue to a more value-adding fertiliser by-product to be used as a soil improver and growing medium in landscaping or landfills sites or other closed industrial areas, where heavy metal limit values for fertilisers are not applied in Finland.
- Open Access
- 7 March 2022
- Published by Springer Nature in Waste and Biomass Valorization
- Vol. 13 (8) , 3573-3584
The Effects of Mixing Pulp and Paper Mill Sludge Into Wood Bark on Storage-Related Environmental Impacts and Heating Value
The pulping industry generates vast amounts of bark and wastewater treatment sludges, which are combined and stored in stacks, often in the open air, prior to combustion for energy. The effects of incorporating sludge into bark on heating value and storage-related environmental impacts were investigated in laboratory and outdoors. Biological degradation was found to be higher in treatments containing 25% sludge (B75S25) and 50% sludge (B50S50) in comparison with pure bark (B100). Mean monthly dry mass loss was 2.1% (B100), 3.3% (B75S25), and 3.7% (B50S50) in the laboratory and 2.7, 4.2, and 4.8%, respectively, outdoors. Addition of sludge maintained degradation activity at low temperatures (+ 3 °C). Co-storage of sludge and bark led to loss of energy, mainly due to increased loss of biomass and increased moisture, which governed the heating value. Cumulative methane emissions were higher from the sludge-containing treatments than from pure bark, but emissions of nitrogen-containing gases (N2O and NH3) were negligible throughout. Sludge addition roughly halved the cumulative chemical oxygen demand (COD) of leachate and minimized its concentration of phosphate-P. However, larger amounts of inorganic elements were released from the sludge-containing treatments. Overall, these results indicate that finding alternative uses for the sludge fraction would be beneficial. Graphical
- 7 March 2022
- Published by Springer Nature in Waste and Biomass Valorization
- Vol. 13 (8) , 3573-3584
Open AccessThe Effects of Mixing Pulp and Paper Mill Sludge Into Wood Bark on Storage-Related Environmental Impacts and Heating Value
The pulping industry generates vast amounts of bark and wastewater treatment sludges, which are combined and stored in stacks, often in the open air, prior to combustion for energy. The effects of incorporating sludge into bark on heating value and storage-related environmental impacts were investigated in laboratory and outdoors. Biological degradation was found to be higher in treatments containing 25% sludge (B75S25) and 50% sludge (B50S50) in comparison with pure bark (B100). Mean monthly dry mass loss was 2.1% (B100), 3.3% (B75S25), and 3.7% (B50S50) in the laboratory and 2.7, 4.2, and 4.8%, respectively, outdoors. Addition of sludge maintained degradation activity at low temperatures (+ 3 °C). Co-storage of sludge and bark led to loss of energy, mainly due to increased loss of biomass and increased moisture, which governed the heating value. Cumulative methane emissions were higher from the sludge-containing treatments than from pure bark, but emissions of nitrogen-containing gases (N2O and NH3) were negligible throughout. Sludge addition roughly halved the cumulative chemical oxygen demand (COD) of leachate and minimized its concentration of phosphate-P. However, larger amounts of inorganic elements were released from the sludge-containing treatments. Overall, these results indicate that finding alternative uses for the sludge fraction would be beneficial. Graphical
- Open Access
- 19 July 2021
- Published by Springer Nature in Research Square
The Effects of Mixing Pulp and Paper Mill Sludge Into Wood Bark on Storage-Related Environmental Impacts and Heating Value
The pulping industry generates vast amounts of bark residues and wastewater treatment sludges, which are combined and stored for varying periods in stacks, often in the open air, prior to utilization for energy via combustion. In order to optimize the storage strategy, the effects of incorporating sludge into bark on heating value and storage-related environmental impacts were investigated in laboratory and outdoor studies. Biological degradation activity was found to be higher in treatments containing 25% sludge (B75S25) and 50% sludge (B50S50) on a fresh mass basis, in comparison with pure bark (B100). Mean monthly dry mass loss was 2.1% (B100), 3.3% (B75S25), and 3.7% (B50S50) in the laboratory and 2.7%, 4.2%, and 4.8%, respectively, outdoors. Sludge addition was found to maintain degradation activity at low temperatures (+ 3°C). Co-storage of sludge and bark led to loss of energy, mainly due to increased loss of biomass and increased moisture content. Overall, biomass moisture content governed the heating value. Cumulative methane emissions over the storage period were higher from the sludge-containing treatments than from pure bark, but emissions of nitrogen-containing gases (N2O and NH3) were negligible throughout. Sludge addition roughly halved the cumulative chemical oxygen demand (COD) of leachate and minimized its concentration of phosphate-P. However, larger amounts of inorganic elements were released to the percolating water from the sludge-containing treatments. Overall, these results indicate that finding alternative uses for the sludge fraction would be beneficial.
- 19 July 2021
- Published by Springer Nature in Research Square
Open AccessThe Effects of Mixing Pulp and Paper Mill Sludge Into Wood Bark on Storage-Related Environmental Impacts and Heating Value
The pulping industry generates vast amounts of bark residues and wastewater treatment sludges, which are combined and stored for varying periods in stacks, often in the open air, prior to utilization for energy via combustion. In order to optimize the storage strategy, the effects of incorporating sludge into bark on heating value and storage-related environmental impacts were investigated in laboratory and outdoor studies. Biological degradation activity was found to be higher in treatments containing 25% sludge (B75S25) and 50% sludge (B50S50) on a fresh mass basis, in comparison with pure bark (B100). Mean monthly dry mass loss was 2.1% (B100), 3.3% (B75S25), and 3.7% (B50S50) in the laboratory and 2.7%, 4.2%, and 4.8%, respectively, outdoors. Sludge addition was found to maintain degradation activity at low temperatures (+ 3°C). Co-storage of sludge and bark led to loss of energy, mainly due to increased loss of biomass and increased moisture content. Overall, biomass moisture content governed the heating value. Cumulative methane emissions over the storage period were higher from the sludge-containing treatments than from pure bark, but emissions of nitrogen-containing gases (N2O and NH3) were negligible throughout. Sludge addition roughly halved the cumulative chemical oxygen demand (COD) of leachate and minimized its concentration of phosphate-P. However, larger amounts of inorganic elements were released to the percolating water from the sludge-containing treatments. Overall, these results indicate that finding alternative uses for the sludge fraction would be beneficial.
- Open Access
- 1 May 2021
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 22 (5) , 47-58
Comparison of Untreated, Lime-Stabilized and Composted Wastewater Sludges from a Pulp, Board and Paper Mill Integrate as a Fertilizer Product
In this study, the physical and chemical properties of untreated, lime-stabilized and composted wastewater sludges from a Finnish pulp, board and paper mill integrate were compared in order to assess their fertilizer properties based on the requirement of the Finnish Fertilizer Product Decree....
- 1 May 2021
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 22 (5) , 47-58
Open AccessComparison of Untreated, Lime-Stabilized and Composted Wastewater Sludges from a Pulp, Board and Paper Mill Integrate as a Fertilizer Product
In this study, the physical and chemical properties of untreated, lime-stabilized and composted wastewater sludges from a Finnish pulp, board and paper mill integrate were compared in order to assess their fertilizer properties based on the requirement of the Finnish Fertilizer Product Decree....