Laurence Cochrane
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Laurence Cochrane has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Miguel Fernando Gonzalez-Zalba
Quantum Motion, London, UK
5 shared publications Benoit Bertrand
CEA/LETI-MINATEC, CEA-Grenoble, 38000 Grenoble, France
3 shared publications- Jason W. A. Robinson
Department of Materials Science & Metallurgy University of Cambridge 27 Charles Babbage Road CB3 0FS Cambridge United Kingdom
3 shared publications Maud Vinet
CEA/LETI-MINATEC, CEA-Grenoble, 38000 Grenoble, France
3 shared publicationsNadia Stelmashenko
Department of Materials Sciences and Metallurgy, University of Cambridge
3 shared publicationsAshwin A. Seshia
Nanoscience Centre Department of Engineering University of Cambridge CB3 0FF Cambridge United Kingdom
2 shared publications
Latest Publications
- Open Access
- 28 June 2024
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 21 (6) , 064066
Intrinsic noise of the single-electron box
The radio-frequency (rf) single-electron box is becoming an attractive charge sensor for semiconductor-based quantum computing devices due to its high sensitivity and small footprint, which facilitate the design of highly connected qubit architectures. However, an understanding of its ultimate sensitivity is missing due to the lack of a noise model. Here, we quantify the intrinsic noise of the single-electron box arising from stochastic cyclic electron tunneling between a quantum dot and a reservoir driven by a periodic gate voltage. We use both a master-equation formalism and Markov Monte Carlo simulations to calculate the gate-noise current and find that the noise mechanism can be represented as a cyclostationary process. We consider the implications of this cyclostationary noise on the ultimate sensitivity of single-electron box sensors for fast high-fidelity readout of spin qubits, in particular evaluating results for rf reflectometry implementations and the back action of the sensor on a qubit. Furthermore, we determine the conditions under which the intrinsic noise limit could be measured experimentally and techniques by which the noise can be suppressed to enhance qubit-readout fidelity. Published by the American Physical Society 2024
- 28 June 2024
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 21 (6) , 064066
Open AccessIntrinsic noise of the single-electron box
The radio-frequency (rf) single-electron box is becoming an attractive charge sensor for semiconductor-based quantum computing devices due to its high sensitivity and small footprint, which facilitate the design of highly connected qubit architectures. However, an understanding of its ultimate sensitivity is missing due to the lack of a noise model. Here, we quantify the intrinsic noise of the single-electron box arising from stochastic cyclic electron tunneling between a quantum dot and a reservoir driven by a periodic gate voltage. We use both a master-equation formalism and Markov Monte Carlo simulations to calculate the gate-noise current and find that the noise mechanism can be represented as a cyclostationary process. We consider the implications of this cyclostationary noise on the ultimate sensitivity of single-electron box sensors for fast high-fidelity readout of spin qubits, in particular evaluating results for rf reflectometry implementations and the back action of the sensor on a qubit. Furthermore, we determine the conditions under which the intrinsic noise limit could be measured experimentally and techniques by which the noise can be suppressed to enhance qubit-readout fidelity. Published by the American Physical Society 2024
- Open Access
- 8 April 2024
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 21 (4) , 044016
Multimodule microwave assembly for fast readout and charge-noise characterization of silicon quantum dots
Fast measurements of quantum devices is useful in areas such as quantum sensing, quantum computing, and nanodevice quality analysis. Here, we develop a superconductor-semiconductor multimodule microwave assembly to demonstrate charge-state readout at the state of the art. The assembly consist of a superconducting readout resonator interfaced to a silicon-on-insulator (SOI) chiplet containing quantum dots (QDs) in a high- nanowire transistor. The superconducting chiplet contains resonant and coupling elements as well as filters that, when interfaced with the silicon chip, result in a resonant frequency GHz, a loaded quality factor , and a resonator impedance . Combined with the large gate lever arms of SOI technology, we achieve a minimum integration time for single and double QD transitions of 2.77 and 13.5 ns, respectively. We utilize the assembly to measure charge noise over 9 decades of frequency up to 500 kHz and find a dependence across the whole frequency spectrum as well as a charge-noise level of at 1 Hz. The modular microwave circuitry presented here can be directly utilized in conjunction with other quantum devices to improve the readout performance as well as enable large bandwidth noise spectroscopy, all without the complexity of superconductor-semiconductor monolithic fabrication.- 8 April 2024
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 21 (4) , 044016
Open AccessMultimodule microwave assembly for fast readout and charge-noise characterization of silicon quantum dots
Fast measurements of quantum devices is useful in areas such as quantum sensing, quantum computing, and nanodevice quality analysis. Here, we develop a superconductor-semiconductor multimodule microwave assembly to demonstrate charge-state readout at the state of the art. The assembly consist of a superconducting readout resonator interfaced to a silicon-on-insulator (SOI) chiplet containing quantum dots (QDs) in a high- nanowire transistor. The superconducting chiplet contains resonant and coupling elements as well as filters that, when interfaced with the silicon chip, result in a resonant frequency GHz, a loaded quality factor , and a resonator impedance . Combined with the large gate lever arms of SOI technology, we achieve a minimum integration time for single and double QD transitions of 2.77 and 13.5 ns, respectively. We utilize the assembly to measure charge noise over 9 decades of frequency up to 500 kHz and find a dependence across the whole frequency spectrum as well as a charge-noise level of at 1 Hz. The modular microwave circuitry presented here can be directly utilized in conjunction with other quantum devices to improve the readout performance as well as enable large bandwidth noise spectroscopy, all without the complexity of superconductor-semiconductor monolithic fabrication. - Open Access
Intrinsic Noise of the Single Electron Box
The radio-frequency Single-Electron Box is becoming an attractive charge sensor for semiconductor-based quantum computing devices due to its high sensitivity and small footprint, which facilitates the design of highly connected qubit architectures. However, an understanding of its ultimate sensitivity is missing due to the lack of a noise model. Here, we quantify the intrinsic noise of the Single-Electron Box arising from stochastic cyclic electron tunnelling between a quantum dot and a reservoir driven by a periodic gate voltage. We use both a master equation formalism and Markov Monte Carlo simulations to calculate the gate noise current, and find the noise mechanism can be represented as a cyclostationary process. We consider the implications of this cyclostationary noise on the ultimate sensitivity of Single-Electron Box sensors for fast, high-fidelity readout of spin qubits, in particular evaluating results for radio-frequency reflectometry implementations and the backaction of the sensor on a qubit. Furthermore, we determine the conditions under which the intrinsic noise limit could be measured experimentally and techniques by which the noise can be suppressed to enhance qubit readout fidelity.
Open AccessIntrinsic Noise of the Single Electron Box
The radio-frequency Single-Electron Box is becoming an attractive charge sensor for semiconductor-based quantum computing devices due to its high sensitivity and small footprint, which facilitates the design of highly connected qubit architectures. However, an understanding of its ultimate sensitivity is missing due to the lack of a noise model. Here, we quantify the intrinsic noise of the Single-Electron Box arising from stochastic cyclic electron tunnelling between a quantum dot and a reservoir driven by a periodic gate voltage. We use both a master equation formalism and Markov Monte Carlo simulations to calculate the gate noise current, and find the noise mechanism can be represented as a cyclostationary process. We consider the implications of this cyclostationary noise on the ultimate sensitivity of Single-Electron Box sensors for fast, high-fidelity readout of spin qubits, in particular evaluating results for radio-frequency reflectometry implementations and the backaction of the sensor on a qubit. Furthermore, we determine the conditions under which the intrinsic noise limit could be measured experimentally and techniques by which the noise can be suppressed to enhance qubit readout fidelity.
- Open Access
- 20 June 2023
- Published by American Physical Society (APS) in PRX Quantum
- Vol. 4 (2) , 020346
Quantum Dot-Based Frequency Multiplier
Silicon offers the enticing opportunity to integrate hybrid quantum-classical computing systems on a single platform. For qubit control and readout, high-frequency signals are required. Therefore, devices that can facilitate its generation are needed. Here, we present a quantum dot-based radio-frequency multiplier operated at cryogenic temperatures. The device is based on the nonlinear capacitance-voltage characteristics of quantum dot systems arising from their low-dimensional density of states. We implement the multiplier in a multigate silicon-nanowire transistor using two complementary device configurations: a single quantum dot coupled to a charge reservoir and a coupled double quantum dot. We study the harmonic voltage conversion as a function of the energy detuning, the multiplication factor, and the harmonic phase noise and find near ideal performance up to a multiplication factor of 10. Our results demonstrate a method for high-frequency conversion that could be readily integrated into silicon-based quantum computing systems and be applied to other semiconductors.
- 20 June 2023
- Published by American Physical Society (APS) in PRX Quantum
- Vol. 4 (2) , 020346
Open AccessQuantum Dot-Based Frequency Multiplier
Silicon offers the enticing opportunity to integrate hybrid quantum-classical computing systems on a single platform. For qubit control and readout, high-frequency signals are required. Therefore, devices that can facilitate its generation are needed. Here, we present a quantum dot-based radio-frequency multiplier operated at cryogenic temperatures. The device is based on the nonlinear capacitance-voltage characteristics of quantum dot systems arising from their low-dimensional density of states. We implement the multiplier in a multigate silicon-nanowire transistor using two complementary device configurations: a single quantum dot coupled to a charge reservoir and a coupled double quantum dot. We study the harmonic voltage conversion as a function of the energy detuning, the multiplication factor, and the harmonic phase noise and find near ideal performance up to a multiplication factor of 10. Our results demonstrate a method for high-frequency conversion that could be readily integrated into silicon-based quantum computing systems and be applied to other semiconductors.
- 13 January 2023
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 9 (2) , eade2522
A magnetically actuated, optically sensed tensile testing method for mechanical characterization of soft biological tissues
Mechanical properties of soft biological tissues play a critical role in physiology and disease, affecting cell behavior and fate decisions and contributing to tissue development, maintenance, and repair. Limitations of existing tools prevent a comprehensive characterization of soft tissue biomechanics, hindering our understanding of these fundamental processes. Here, we develop an instrument for high-fidelity uniaxial tensile testing of soft biological tissues in controlled environmental conditions, which is based on the closed-loop interaction between an electromagnetic actuator and an optical strain sensor. We first validate the instrument using synthetic elastomers characterized via conventional methods; then, we leverage the proposed device to investigate the mechanical properties of murine esophageal tissue and, individually, of each of its constitutive layers, namely, the epithelial, connective, and muscle tissues. The enhanced reliability of this instrument makes it an ideal platform for future wide-ranging studies of the mechanics of soft biological tissues.
- 13 January 2023
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 9 (2) , eade2522
A magnetically actuated, optically sensed tensile testing method for mechanical characterization of soft biological tissues
Mechanical properties of soft biological tissues play a critical role in physiology and disease, affecting cell behavior and fate decisions and contributing to tissue development, maintenance, and repair. Limitations of existing tools prevent a comprehensive characterization of soft tissue biomechanics, hindering our understanding of these fundamental processes. Here, we develop an instrument for high-fidelity uniaxial tensile testing of soft biological tissues in controlled environmental conditions, which is based on the closed-loop interaction between an electromagnetic actuator and an optical strain sensor. We first validate the instrument using synthetic elastomers characterized via conventional methods; then, we leverage the proposed device to investigate the mechanical properties of murine esophageal tissue and, individually, of each of its constitutive layers, namely, the epithelial, connective, and muscle tissues. The enhanced reliability of this instrument makes it an ideal platform for future wide-ranging studies of the mechanics of soft biological tissues.
- 10 May 2022
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 128 (19) , 197701
Parametric Amplifiers Based on Quantum Dots
Josephson parametric amplifiers (JPAs) approaching quantum-limited noise performance have been instrumental in enabling high fidelity readout of superconducting qubits and, recently, semiconductor quantum dots (QDs). We propose that the quantum capacitance arising in electronic two-level systems (the dual of Josephson inductance) can provide an alternative dissipationless nonlinear element for parametric amplification. We experimentally demonstrate phase-sensitive parametric amplification using a QD-reservoir electron transition in a CMOS nanowire split-gate transistor embedded in a 1.8 GHz superconducting lumped-element microwave cavity, achieving parametric gains of to , limited by Sisyphus dissipation. Using a semiclassical model, we find an optimized design within current technological capabilities could achieve gains and bandwidths comparable to JPAs, while providing complementary specifications with respect to integration in semiconductor platforms or operation at higher magnetic fields.- 10 May 2022
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 128 (19) , 197701
Parametric Amplifiers Based on Quantum Dots
Josephson parametric amplifiers (JPAs) approaching quantum-limited noise performance have been instrumental in enabling high fidelity readout of superconducting qubits and, recently, semiconductor quantum dots (QDs). We propose that the quantum capacitance arising in electronic two-level systems (the dual of Josephson inductance) can provide an alternative dissipationless nonlinear element for parametric amplification. We experimentally demonstrate phase-sensitive parametric amplification using a QD-reservoir electron transition in a CMOS nanowire split-gate transistor embedded in a 1.8 GHz superconducting lumped-element microwave cavity, achieving parametric gains of to , limited by Sisyphus dissipation. Using a semiclassical model, we find an optimized design within current technological capabilities could achieve gains and bandwidths comparable to JPAs, while providing complementary specifications with respect to integration in semiconductor platforms or operation at higher magnetic fields.- Open Access
Quantum Dot-Based Parametric Amplifiers
Josephson parametric amplifiers (JPAs) approaching quantum-limited noise performance have been instrumental in enabling high fidelity readout of superconducting qubits and, recently, semiconductor quantum dots (QDs). We propose that the quantum capacitance arising in electronic two-level systems (the dual of Josephson inductance) can provide an alternative dissipation-less non-linear element for parametric amplification. We experimentally demonstrate phase-sensitive parametric amplification using a QD-reservoir electron transition in a CMOS nanowire split-gate transistor embedded in a 1.8~GHz superconducting lumped-element microwave cavity, achieving parametric gains of -3 to +3 dB, limited by Sisyphus dissipation. Using a semi-classical model, we find an optimised design within current technological capabilities could achieve gains and bandwidths comparable to JPAs, while providing complementary specifications with respect to integration in semiconductor platforms or operation at higher magnetic fields.
Open AccessQuantum Dot-Based Parametric Amplifiers
Josephson parametric amplifiers (JPAs) approaching quantum-limited noise performance have been instrumental in enabling high fidelity readout of superconducting qubits and, recently, semiconductor quantum dots (QDs). We propose that the quantum capacitance arising in electronic two-level systems (the dual of Josephson inductance) can provide an alternative dissipation-less non-linear element for parametric amplification. We experimentally demonstrate phase-sensitive parametric amplification using a QD-reservoir electron transition in a CMOS nanowire split-gate transistor embedded in a 1.8~GHz superconducting lumped-element microwave cavity, achieving parametric gains of -3 to +3 dB, limited by Sisyphus dissipation. Using a semi-classical model, we find an optimised design within current technological capabilities could achieve gains and bandwidths comparable to JPAs, while providing complementary specifications with respect to integration in semiconductor platforms or operation at higher magnetic fields.
- Open Access
- 5 May 2021
- Published by American Physical Society (APS) in PRX Quantum
- Vol. 2 (2) , 020315
Large Dispersive Interaction between a CMOS Double Quantum Dot and Microwave Photons
We report fast charge-state readout of a double quantum dot in a CMOS split-gate silicon nanowire transistor via the large dispersive interaction with microwave photons in a lumped-element resonator formed by hybrid integration with a superconducting inductor. We achieve a coupling rate by exploiting the large interdot gate lever arm of an asymmetric split-gate device, , and by inductively coupling to the resonator to increase its impedance, . In the dispersive regime, the large coupling strength at the double quantum-dot hybridization point produces a frequency shift comparable to the resonator linewidth, the optimal setting for maximum state visibility. We exploit this regime to demonstrate rapid dispersive readout of the charge degree of freedom, with a SNR of 3.3 in 50 ns. In the resonant regime, the fast charge decoherence rate precludes reaching the strong coupling regime, but we show a clear route to spin-photon circuit quantum electrodynamics using hybrid CMOS systems.- 5 May 2021
- Published by American Physical Society (APS) in PRX Quantum
- Vol. 2 (2) , 020315
Open AccessLarge Dispersive Interaction between a CMOS Double Quantum Dot and Microwave Photons
We report fast charge-state readout of a double quantum dot in a CMOS split-gate silicon nanowire transistor via the large dispersive interaction with microwave photons in a lumped-element resonator formed by hybrid integration with a superconducting inductor. We achieve a coupling rate by exploiting the large interdot gate lever arm of an asymmetric split-gate device, , and by inductively coupling to the resonator to increase its impedance, . In the dispersive regime, the large coupling strength at the double quantum-dot hybridization point produces a frequency shift comparable to the resonator linewidth, the optimal setting for maximum state visibility. We exploit this regime to demonstrate rapid dispersive readout of the charge degree of freedom, with a SNR of 3.3 in 50 ns. In the resonant regime, the fast charge decoherence rate precludes reaching the strong coupling regime, but we show a clear route to spin-photon circuit quantum electrodynamics using hybrid CMOS systems.