Khavharendwe M. Rambau

In this study, two waste materials namely; coal fly ash (CFA) and waste tyres pyrolysis oil, were successfuly utilized in the synthesis of carbon nanofibers/tubes (CNF/Ts). In addition, Fe-rich CFA magnetic fraction (Mag-CFA) and ethylene gas were also used for comparison purposes. The carbons obtained from CFA were found to be anchored on the surface of the cenosphere and consisted of both CNTs and CNFs, whereas those obtained from Mag-CFA consisted of only multi-walled carbon nanotubes (MWCNTs). The study further showed that the type of carbon precursor and support material played an important role in determining the nanocarbon growth mechanism. The findings from this research have demonstrated that it is possible to utilize waste tyres pyrolysis oil vapor as a substitute for some expensive commercial carbonaceous gases.

In this study, we investigated the potential for use of waste tyre pyrolysis oil vapour as a carbon precursor in the synthesis of zeolite templated carbons (ZTC). With Zeolite 13X as the template, the ZTCs were synthesised using two methods namely: 1-step process which involved the carbonization of gaseous carbon precursor in the zeolite template (in this case, ethylene and pyrolysis oil vapour) and the 2-step synthesis method involved the impregnation of zeolite pores with furfural alcohol prior to carbonization of the gaseous carbon precursor. The replication of the zeolite 13X structural ordering was successful using both methods. The 2-step synthesized ZTCs were found to possess the highest specific surface area (3341 m² g⁻¹) and also had the highest H₂ storage capacity (2.5 wt.%). The study therefore confirmed an additional novel strategy for value-addition of waste tyre pyrolysis by-products.