Yaping Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yaping Wang has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Li Wang
School of Materials Science and Engineering, Hebei University of Technology, Tianjin, China
5 shared publications Wenyan Wang
5 shared publicationsYifang Zhang
5 shared publications- Yifang Zhang
School of Material Science and Engineering State Key Laboratory of Separation Membrane and Membrane Processes Tiangong University Tianjin China
5 shared publications - Anqiang Pan
School of Materials Science and Engineering, Xinjiang University, Urumqi 830017, Xinjiang, People's Republic of China
4 shared publications Bin Guo
Key Laboratory of Special Functional Materials for Ecological Environment and Information Ministry of Education Hebei University of Technology Tianjin China
4 shared publications
Latest Publications
- Open Access
- 6 October 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (19) , e71129
Multi‐Metal Metal–Organic Framework Electrocatalysts Recycled From Spent Li‐Ion Batteries for Efficient Oxygen Evolution
Developing efficient and stable transition metal oxygen evolution reaction (OER) catalysts is crucial for clean energy technologies, while recycling spent lithium‐ion batteries (LIBs) faces challenges of high energy consumption and low added value. Herein, we propose a green strategy to recover valuable metals from spent LIBs and convert them into high‐performance OER catalysts. Using spent LiNi 0.33 Co 0.33 Mn 0.33 O 2 (NCM111) cathodes as raw material, metal ions were extracted by acid leaching, followed by a one‐step hydrothermal synthesis on nickel foam to fabricate a MnFeCoNiCu metal–organic framework catalyst (MFCNC‐ X ). The results demonstrate that MFCNC‐150 synthesized at 150 °C exhibits a unique petal‐like stacked morphology, high specific surface area, and excellent hydrophilicity. Benefiting from the regulation of the electronic structure induced by the multi‐metal synergistic effect and interactions among multi‐metal active sites, MFCNC‐150 exhibits outstanding OER activity in 1 M KOH electrolyte, with an overpotential of only 237 mV at a current density of 10 mA cm −2 , a Tafel slope of 56.35 mV dec −1 , and long‐term stability exceeding 120 h. Electrochemical characterization and post‐reaction analysis reveal surface restructuring during OER process, forming active metal hydroxide sites. This work offers novel insights for high‐value recycling of spent LIBs and development of efficient transition metal OER catalysts.
- 6 October 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (19) , e71129
Open AccessMulti‐Metal Metal–Organic Framework Electrocatalysts Recycled From Spent Li‐Ion Batteries for Efficient Oxygen Evolution
Developing efficient and stable transition metal oxygen evolution reaction (OER) catalysts is crucial for clean energy technologies, while recycling spent lithium‐ion batteries (LIBs) faces challenges of high energy consumption and low added value. Herein, we propose a green strategy to recover valuable metals from spent LIBs and convert them into high‐performance OER catalysts. Using spent LiNi 0.33 Co 0.33 Mn 0.33 O 2 (NCM111) cathodes as raw material, metal ions were extracted by acid leaching, followed by a one‐step hydrothermal synthesis on nickel foam to fabricate a MnFeCoNiCu metal–organic framework catalyst (MFCNC‐ X ). The results demonstrate that MFCNC‐150 synthesized at 150 °C exhibits a unique petal‐like stacked morphology, high specific surface area, and excellent hydrophilicity. Benefiting from the regulation of the electronic structure induced by the multi‐metal synergistic effect and interactions among multi‐metal active sites, MFCNC‐150 exhibits outstanding OER activity in 1 M KOH electrolyte, with an overpotential of only 237 mV at a current density of 10 mA cm −2 , a Tafel slope of 56.35 mV dec −1 , and long‐term stability exceeding 120 h. Electrochemical characterization and post‐reaction analysis reveal surface restructuring during OER process, forming active metal hydroxide sites. This work offers novel insights for high‐value recycling of spent LIBs and development of efficient transition metal OER catalysts.
- 27 August 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 695
A halloysite/PVDF composite electrolyte toward high-performance shuttle-inhibition quasi-solid-state Zn-I2 batteries
- 27 August 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 695
A halloysite/PVDF composite electrolyte toward high-performance shuttle-inhibition quasi-solid-state Zn-I2 batteries
- Open Access
- 9 August 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (73) , e77677
Polarity Index‐Guided Screening for Interfacial Molecular Enrichment Enabling Stable Zinc Metal Anodes
Functional additives enrichment within protective coatings represents a promising strategy for stabilizing zinc anode. However, selecting suitable additive molecules remains challenging due to required multifunctional adsorption capability. Herein, this work proposes the comprehensive consideration of polarity parameters for selecting functionally enriched additives within coatings, particularly the polar surface area (PSA) and PSA ratio as highly pertinent descriptors. As a validation, N‐methylformamide (NMF), with high PSA (82.39 Å 2 ) and PSA ratio (80.13%), provides thermodynamically favorable sites for interaction between kaolinite (KL) and Zn 2+ . NMF enables a stable and energetically favorable arrangement within the kaolinite interlayer for enhanced electric field regulation capability and efficient ion transport, thus simultaneously achieving stable interface and fast kinetics. The KL‐NMF@Zn symmetric cell cycle stably for over 1000 h at 1 mAh cm −2 and 150 h at 10 mAh cm −2 (∼57% DOD). The NH 4 V 4 O 10 ||KL‐NMF@Zn full cell retains 165.9 mAh g −1 after 400 cycles at 1 A g −1 (N/p = 3.22). The 300‐mAh pouch cell cycle steadily for 200 cycles at 3 mAh cm −2 , highlighting the practical potential. This work provides a novel concept utilizing comprehensive polarity parameters for scalable interfacial engineering toward durable aqueous zinc metal batteries.
- 9 August 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (73) , e77677
Open AccessPolarity Index‐Guided Screening for Interfacial Molecular Enrichment Enabling Stable Zinc Metal Anodes
Functional additives enrichment within protective coatings represents a promising strategy for stabilizing zinc anode. However, selecting suitable additive molecules remains challenging due to required multifunctional adsorption capability. Herein, this work proposes the comprehensive consideration of polarity parameters for selecting functionally enriched additives within coatings, particularly the polar surface area (PSA) and PSA ratio as highly pertinent descriptors. As a validation, N‐methylformamide (NMF), with high PSA (82.39 Å 2 ) and PSA ratio (80.13%), provides thermodynamically favorable sites for interaction between kaolinite (KL) and Zn 2+ . NMF enables a stable and energetically favorable arrangement within the kaolinite interlayer for enhanced electric field regulation capability and efficient ion transport, thus simultaneously achieving stable interface and fast kinetics. The KL‐NMF@Zn symmetric cell cycle stably for over 1000 h at 1 mAh cm −2 and 150 h at 10 mAh cm −2 (∼57% DOD). The NH 4 V 4 O 10 ||KL‐NMF@Zn full cell retains 165.9 mAh g −1 after 400 cycles at 1 A g −1 (N/p = 3.22). The 300‐mAh pouch cell cycle steadily for 200 cycles at 3 mAh cm −2 , highlighting the practical potential. This work provides a novel concept utilizing comprehensive polarity parameters for scalable interfacial engineering toward durable aqueous zinc metal batteries.
- Open Access
- 29 July 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (34) , e71376
Magnetic Field‐Tailored Copper Layers With Fast Dissolution‐Redeposition Kinetics for Stable Zinc Metal Anodes
Chemical displacement offers a straightforward route to fabricate metal protective layers on zinc anodes. However, stochastic and inhomogeneous nucleation and growth of the displaced metal, together with uncontrollable dynamic evolution, often culminate in a limited protective effect. Herein, we propose a magnetic field‐assisted strategy to modulate displacement reaction kinetics, yielding a uniform and compact Cu protective layer on Zn (ZnCu‐MF). The magnetohydrodynamic effect governs Cu 2+ transport during displacement, promotes uniform Cu nucleation, and suppresses the “galvanic cell” dominated displacement pathway. Furthermore, we verify the interfacial reaction mechanisms involving copper dissolution‐redeposition and Zn‐Cu co‐deposition, which accelerate interfacial kinetics and foster the formation of a zincophilic CuZn 5 alloy layer, thereby enabling stable long‐term and high‐rate cycling. Consequently, ZnCu‐MF||ZnCu‐MF symmetric cells achieve a cycle life exceeding 5000 h at 2 mA cm −2 and over 4800 h at 10 mA cm −2 . Moreover, ZnCu‐MF||Cu half‐cells deliver an average coulombic efficiency of 99.8% over 1300 cycles. A full cell with a vanadium‐based cathode exhibits superior rate capability and a lifespan surpassing 1000 cycles. Remarkably, a pouch cell with high loading of 19.35 mg cm −2 (4.7 mAh cm −2 ) and a low N/P ratio of 3.7 attains about 0.3 Ah and sustains stable operation for over 300 cycles.
- 29 July 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (34) , e71376
Open AccessMagnetic Field‐Tailored Copper Layers With Fast Dissolution‐Redeposition Kinetics for Stable Zinc Metal Anodes
Chemical displacement offers a straightforward route to fabricate metal protective layers on zinc anodes. However, stochastic and inhomogeneous nucleation and growth of the displaced metal, together with uncontrollable dynamic evolution, often culminate in a limited protective effect. Herein, we propose a magnetic field‐assisted strategy to modulate displacement reaction kinetics, yielding a uniform and compact Cu protective layer on Zn (ZnCu‐MF). The magnetohydrodynamic effect governs Cu 2+ transport during displacement, promotes uniform Cu nucleation, and suppresses the “galvanic cell” dominated displacement pathway. Furthermore, we verify the interfacial reaction mechanisms involving copper dissolution‐redeposition and Zn‐Cu co‐deposition, which accelerate interfacial kinetics and foster the formation of a zincophilic CuZn 5 alloy layer, thereby enabling stable long‐term and high‐rate cycling. Consequently, ZnCu‐MF||ZnCu‐MF symmetric cells achieve a cycle life exceeding 5000 h at 2 mA cm −2 and over 4800 h at 10 mA cm −2 . Moreover, ZnCu‐MF||Cu half‐cells deliver an average coulombic efficiency of 99.8% over 1300 cycles. A full cell with a vanadium‐based cathode exhibits superior rate capability and a lifespan surpassing 1000 cycles. Remarkably, a pouch cell with high loading of 19.35 mg cm −2 (4.7 mAh cm −2 ) and a low N/P ratio of 3.7 attains about 0.3 Ah and sustains stable operation for over 300 cycles.
- Open Access
- 20 May 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (50) , e76008
Dielectric‐Tailored Water Structure in Sepiolite‐Based Electrolyte for Stable Quasi‐Solid Zinc‑Iodine Batteries
Aqueous zinc‑iodine (Zn‐I 2 ) batteries face severe self‑discharge and anode instability due to polyiodide shuttle and side reactions, closely linked to the aqueous environment and elusive ionic behavior. The proposed electrolyte strategies for this issue focus on the high dielectric constant of water, ignoring the dielectric loss associated with water molecular polarization. Herein, we report a sepiolite‐based quasi‐solid electrolyte featuring a precisely tailored water structure including zeolitic, coordinated, and structural water, enabling fine‐tuning of dielectric properties and ion‐transport pathways. High zeolitic water content elevates the dielectric constant, along with the increased dielectric loss caused by dipole polarization of water molecules. Conversely, complete removal of water deteriorates Zn 2+ transport kinetics. The optimized electrolyte (ZnSEP‐2H 2 O) achieves an ideal balance between ion conductivity and polarization loss, effectively suppressing both Zn dendrite growth and polyiodide shuttle. As a result, Zn||Zn symmetric cells exhibit stable cycling over 2250 h at 0.4 mA cm − 2 , while Zn||AC@I 2 full cells retain a specific capacity of 100.7 mAh g − 1 after 50 000 cycles at 10 A g − 1 , with significantly mitigated self‐discharge. This work provides a rational electrolyte design strategy through water structure engineering and elucidates the governed mechanism of Zn 2+ migration kinetics and polyiodide confinement toward durable Zn‐I 2 batteries.
- 20 May 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (50) , e76008
Open AccessDielectric‐Tailored Water Structure in Sepiolite‐Based Electrolyte for Stable Quasi‐Solid Zinc‑Iodine Batteries
Aqueous zinc‑iodine (Zn‐I 2 ) batteries face severe self‑discharge and anode instability due to polyiodide shuttle and side reactions, closely linked to the aqueous environment and elusive ionic behavior. The proposed electrolyte strategies for this issue focus on the high dielectric constant of water, ignoring the dielectric loss associated with water molecular polarization. Herein, we report a sepiolite‐based quasi‐solid electrolyte featuring a precisely tailored water structure including zeolitic, coordinated, and structural water, enabling fine‐tuning of dielectric properties and ion‐transport pathways. High zeolitic water content elevates the dielectric constant, along with the increased dielectric loss caused by dipole polarization of water molecules. Conversely, complete removal of water deteriorates Zn 2+ transport kinetics. The optimized electrolyte (ZnSEP‐2H 2 O) achieves an ideal balance between ion conductivity and polarization loss, effectively suppressing both Zn dendrite growth and polyiodide shuttle. As a result, Zn||Zn symmetric cells exhibit stable cycling over 2250 h at 0.4 mA cm − 2 , while Zn||AC@I 2 full cells retain a specific capacity of 100.7 mAh g − 1 after 50 000 cycles at 10 A g − 1 , with significantly mitigated self‐discharge. This work provides a rational electrolyte design strategy through water structure engineering and elucidates the governed mechanism of Zn 2+ migration kinetics and polyiodide confinement toward durable Zn‐I 2 batteries.
- 7 May 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (20) , 9642-9654
Amorphous Metakaolin Interface Layer with Abundant Oxygen Vacancies Enabling High-Utilization Ah-Level Practical Zinc–Iodine Batteries
- 7 May 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (20) , 9642-9654
Amorphous Metakaolin Interface Layer with Abundant Oxygen Vacancies Enabling High-Utilization Ah-Level Practical Zinc–Iodine Batteries
- Top Cited Papers
- 16 March 2026
- Published by Elsevier in Science Bulletin
- Vol. 71 (9) , 2211-2220
Chemically converted volume-resilience interface enables high-capacity zinc anode
- 16 March 2026
- Published by Elsevier in Science Bulletin
- Vol. 71 (9) , 2211-2220
Top Cited PapersChemically converted volume-resilience interface enables high-capacity zinc anode
- 6 February 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (6) , 5193-5200
Hierarchically Porous Diatomite Coating as an Ion Redistributor for Dendrite-Free Zinc Anodes
The relentless challenges of uncontrolled zinc dendrite growth and severe interfacial side reactions pose a significant threat to the operation and reliability of aqueous zinc-ion batteries (AZIBs). To counter these challenges, this work introduces a novel multifunctional interfacial layer engineered from diatomite (DIA) on the zinc anode. The hierarchically ordered porous architecture and enhanced surface area of modified diatomite (M-DIA) serve as an ion transport channel to homogenize the Zn2+ ion flux, further suppressing dendrite formation. Meanwhile, the hydrophobic layer acts as a robust physical barrier, effectively shielding the zinc surface from the aqueous electrolyte. This concerted mechanism yields a dendrite-free morphology and exceptional corrosion resistance. Consequently, the M-DIA@Zn anode enables remarkably stable symmetric cell cycling stability over 1200 h at 2 mA cm-2 and 1500 h at 5 mA cm-2, respectively, and achieves an average Coulombic efficiency of 98.6% in asymmetric cells. When paired with a MnO2 cathode, the full cell exhibits superior capacity retention (260 mAh g-1 after 100 cycles) and outstanding rate performance. This work underscores the potential of natural diatomite as a multifunctional interface for stabilizing metal anodes, offering a promising pathway toward high-performance and durable zinc-based energy storage.
- 6 February 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (6) , 5193-5200
Hierarchically Porous Diatomite Coating as an Ion Redistributor for Dendrite-Free Zinc Anodes
The relentless challenges of uncontrolled zinc dendrite growth and severe interfacial side reactions pose a significant threat to the operation and reliability of aqueous zinc-ion batteries (AZIBs). To counter these challenges, this work introduces a novel multifunctional interfacial layer engineered from diatomite (DIA) on the zinc anode. The hierarchically ordered porous architecture and enhanced surface area of modified diatomite (M-DIA) serve as an ion transport channel to homogenize the Zn2+ ion flux, further suppressing dendrite formation. Meanwhile, the hydrophobic layer acts as a robust physical barrier, effectively shielding the zinc surface from the aqueous electrolyte. This concerted mechanism yields a dendrite-free morphology and exceptional corrosion resistance. Consequently, the M-DIA@Zn anode enables remarkably stable symmetric cell cycling stability over 1200 h at 2 mA cm-2 and 1500 h at 5 mA cm-2, respectively, and achieves an average Coulombic efficiency of 98.6% in asymmetric cells. When paired with a MnO2 cathode, the full cell exhibits superior capacity retention (260 mAh g-1 after 100 cycles) and outstanding rate performance. This work underscores the potential of natural diatomite as a multifunctional interface for stabilizing metal anodes, offering a promising pathway toward high-performance and durable zinc-based energy storage.
- 28 July 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 655
Highly stable zinc anode enabled by a Zn-ion-regulating interface for Zn metal batteries
- 28 July 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 655
Highly stable zinc anode enabled by a Zn-ion-regulating interface for Zn metal batteries
- 28 May 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (22) , 14471-14479
Acid-Etched Self-Assembled Carbonyl Interface toward Dendrite-Free and Long-Cycling Aqueous Zinc Metal Batteries
Uncontrolled dendrite growth, severe parasitic reactions, and sluggish interfacial kinetics at the Zn electrode-electrolyte interface critically impede the commercialization of zinc metal batteries. Herein, an in situ acid-etching strategy was used to automatically fabricate a multifunctional interfacial coating enriched with carbonyl oxygen moieties on zinc foils through aqueous adipic acid treatment (denoted as the AZ@Zn-8 electrode). This engineered surface layer demonstrates enhanced zincophilic characteristics, which significantly improve ion transport kinetics while ensuring a uniform zinc deposition/dissolution behavior during electrochemical processes. The firmly bonded AZ coating on zinc substrates, combined with the strategically oriented (002)Zn planes, synergistically ensures superior corrosion resistance. Consequently, the AZ@Zn-8 electrodes display an ultralong cycle stability over 4800 h at 2 mA cm-2. Furthermore, the full cells assembled incorporating LiFePO4/C and NH4V4O10 cathode materials demonstrate an enhanced electrochemical performance. Therefore, the stabilized Zn anode enabled by acid etching to spontaneously form a functional interfacial layer offers a straightforward and efficient approach for aqueous zinc metal batteries.
- 28 May 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (22) , 14471-14479
Acid-Etched Self-Assembled Carbonyl Interface toward Dendrite-Free and Long-Cycling Aqueous Zinc Metal Batteries
Uncontrolled dendrite growth, severe parasitic reactions, and sluggish interfacial kinetics at the Zn electrode-electrolyte interface critically impede the commercialization of zinc metal batteries. Herein, an in situ acid-etching strategy was used to automatically fabricate a multifunctional interfacial coating enriched with carbonyl oxygen moieties on zinc foils through aqueous adipic acid treatment (denoted as the AZ@Zn-8 electrode). This engineered surface layer demonstrates enhanced zincophilic characteristics, which significantly improve ion transport kinetics while ensuring a uniform zinc deposition/dissolution behavior during electrochemical processes. The firmly bonded AZ coating on zinc substrates, combined with the strategically oriented (002)Zn planes, synergistically ensures superior corrosion resistance. Consequently, the AZ@Zn-8 electrodes display an ultralong cycle stability over 4800 h at 2 mA cm-2. Furthermore, the full cells assembled incorporating LiFePO4/C and NH4V4O10 cathode materials demonstrate an enhanced electrochemical performance. Therefore, the stabilized Zn anode enabled by acid etching to spontaneously form a functional interfacial layer offers a straightforward and efficient approach for aqueous zinc metal batteries.