TBTamara Bilko

Tamara Bilko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tamara Bilko has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Determination of human error probability for heavy truck drivers under wartime conditions

    by Vitalii Tsopa, Serhii Cheberyachko, Oleg Deryugin, Olga Chencheva, Eduard Klimov, Serhii Chernenko, Andrii Chernysh, Nataliia Kostian, Maksym Rud, Tamara Bilko

    The object of the study is the process of changing the cognitive resource of heavy truck drivers during the logistical supply of critical infrastructure facilities under wartime conditions. The problem lies in the lack of a model of changing the cognitive resource of heavy truck drivers, which would combine the psychophysiological state of the driver, the phase structure of the run route and external disturbances to predict the probability of human error in real time. An adapted six-component model of the driver’s functional states has been developed, in which, along with optimal mobilization, monotony, fatigue and drowsiness, acute stress and cognitive tunneling are taken into account. A model of the evolution of the cognitive resource with degradation and recovery flows has been constructed, as well as a procedure for calculating the error intensity as a parameter of a heterogeneous Poisson process. As a result, critical points of reduction in the reliability of the driver’s work before the occurrence of a dangerous event were obtained and preventive actions were quantitatively substantiated. A numerical example of a six-hour run showed a decrease in cognitive resource from 0.95 to 0.006 and an increase in the accumulated probability of error to 0.1839 in the final phase with a combination of fatigue and circadian drowsiness. Such results are explained by a nonlinear increase in the intensity of errors with a deficit of cognitive resource and the synergy of internal and external factors. The model of changes in the cognitive resource of heavy truck drivers can be used by dispatching services of motor transport enterprises if biometric monitoring data and current information about the route are available

  • Open Access

    СОЦІАЛЬНА ТРИВОЖНІСТЬ ПРАЦІВНИКІВ В ОРГАНІЗАЦІЇ: АСПЕКТИ УПРАВЛІННЯ ТА ПРОФІЛАКТИКИ

    by V. А. Tsopa, S. І. Cheberyachko, I. І. Khozhylo, O. V. Deryugin, T. O. Bilko

    Стаття присвячена проблематиці розробки стратегії щодо мінімізації соціальної тривожності працівників в організаціях під час поліпшення систем управління безпекою праці і здоров’я працівників. Проведено аналіз причин виникнення соціальної тривожності у працівників як побічного продукту ініціатив, спрямованих на покращення фізичної безпеки, який виникає як відповідь працівників у випадках, коли система управління охороною здоров’я та безпеки праці впроваджена без глибокого розуміння її психологічного впливу на стан працівників. Продемонстровано, що процеси, які належать до систем управління безпекою праці і здоров’я працівників, згідно з вимогами ISO 45001, мають: посилений моніторинг, аудити, обов’язкове групове навчання щодо питань БПіЗП та вимоги до активної соціальної участі є прямими небезпечними чинниками для працівників із соціальною тривожністю, що створює «парадокс безпеки», за якого заходи, покликані захищати життя і здоров’я працівників, стають джерелом психологічного навантаження і зростання психосоціальних чинників працівників. Визначено, що «розрив між компетентністю та безпекою» працівників, коли соціальна тривога заважає працівникам демонструвати свої реальні знання та використовувати навички з БПіЗП, призводить до індивідуального психологічного страждання, професійного вигорання та «цинізму безпеки», що руйнує довіру до системи управління безпекою праці та здоров’я працівників та підриває всю культуру безпеки зсередини організації. Встановлено, що для зменшення соціальної тривожності необхідно застосувати стратегічну, емпатичну комунікацію, справжнє залучення працівників до спільної розробки безпечних процесів та проводити цілеспрямовану підготовку керівників, які стають головними провідниками нового підходу. Рекомендовано проводити оцінку дієвості систем управління безпекою праці і здоров’я працівників не лише за напрямом зниження травматизму, але й у разі наявності високої культури безпеки, яка, своєю чергою, нерозривно пов’язана з довірою, повагою та психологічною захищеністю кожного працівника організації.


  • Improving the process of occupational risk ­management according to the Haddon matrix

    by V. A Tsopa, S. I Cheberiachko, O. O Yavorska, O. V Deryugin, T. O Bilko

    Purpose. Improving the process of managing occupational risk (OR) in occupational safety and health management systems, due to the distribution of dangerous factors which increase the probability of a dangerous event into several phases: before the occurrence of a dangerous event and after its occurrence. Methodology. The method of morphological analysis is used, which is based on the selection of possible solutions for individual parts of the task based on several morphological typical features important for the problem being solved, and the compilation of all possible combinations of hazardous factors and precautionary measures that will allow reducing the amount of occupational risk. Findings. A new approach to occupational risk management is proposed, which involves the division of all dangerous factors into several phases: before the occurrence of a dangerous event, after its occurrence, provision of pre-medical assistance, provision of emergency and medical care. Typical dangerous factors are defined that increase the probability of the occurrence of a dangerous event, which relate to the first phase (before the occurrence of a dangerous event), as well as dangerous factors that affect the severity of accidents and are characteristic of the second, third and fourth phases (after the occurrence of a dangerous event). A concept was developed for calculating the magnitude of occupational risks, based on the consequences of the occurrence of a dangerous event or by the type of injury with the area of responsibility of the enterprise; from the consequences of pre-medical care or the condition of an injured person with the area of responsibility of the enterprise and with the consequences of emergency and inpatient medical care or the state of loss of health of the employee with the area of responsibility of the medical institution. The hierarchy of preventive measures has been improved due to the addition of protective measures consisting of pre-medical care, emergency medical care, in-patient medical care. Originality. When assessing professional risks, it is proposed to determine the amount in accordance with the area of responsibility of the enterprise and and medical institution taking into account dangerous factors corresponding to a specific phase. Practical value. Examples of three matrices for assessing the occupational risk have been developed, taking into account the classification of the severity of the consequences for the health of the employee, which occurred immediately after the occurrence of a dangerous event (accident), after the provision of pre-medical care and after the provision of emergency and medical care. A description of preventive actions to reduce the severity of the consequences is proposed, taking into account the sphere of responsibility.


  • Open Access

    Identifying features in the structural and phase composition of the products of recycling of the scale of high-speed cutting steel by carbon thermal reduction

    by Viacheslav Borysov, Oleksii Torubara, Vadym Volokh, Anatolii Poliakov, Mykhail Yamshinskij, Ivan Lukianenko, Andrey Andreev, Tamara Bilko, Dmytro Zhuravel, Dmytro Ivanchenko

    This paper reports a study into the features of the structural-phase composition of products from the carbon-thermal reduction of scale of high-speed steels that yields an alloying additive. This is necessary to determine the technological parameters that reduce the loss of target elements in the process of obtaining and using resource-saving alloying material. The study indicates that when the degree of scale reduction changed from 28 % to 67 % and 81 %, an increase in the manifestation of a solid solution of carbon and alloying elements in the α-Fe lattice was observed. At the same time, the intensity of the diffraction maxima of FeO and Fe3O4 decreased. In the reduced products, the presence of Fe3C, FeW3C, Fe3W3C, and WC was traced. With an increase in the degree of scale reduction from 28 % to 67 %, the disordered (of "loose" appearance) microstructure was replaced with the formed particles of round and multifaceted shape with different content of alloying elements. At the reduction stage of 81 %, the microstructure had a finely fibrous structure. Based on the suite of studies, the most acceptable degree of reduction of scale of high-speed steel, followed by the use of the obtained material as an alloying additive, is 81 %. At the same time, ensuring the degree of recovery at the level of 67 % would also suffice. This is due to the fact that residual carbon in the form of carbides provides an increased reducing ability and degree of assimilation of alloying elements with the restoration of the residual oxide component in the liquid metal during doping. Spongy microstructure contributes to faster dissolution, in relation to the corresponding standard ferroalloys. This ensures a reduction in the total smelting time and, as a result, a decrease in the energy consumed


  • Open Access

    Defining the features of structural and phase transformations in the recycling of anthropogenic metallurgical waste containing refractory elements

    by Vadym Volokh, Anatolii Poliakov, Mykhail Yamshinskij, Ivan Lukianenko, Andrey Andreev, Bohdan Tsymbal, Ganna Pedchenko, Tetiana Chorna, Tamara Bilko, Anatolii Dzyuba

    This paper reports a study into the features of the phase composition and microstructure of a master alloy obtained by using the reduction melting of oxide man-made waste. That was necessary to define those technological indicators that provide for an increase in the degree of extraction of alloying elements during the recycling of anthropogenic raw materials and the subsequent use of the alloying material. It has been determined that the phase composition of the alloy at a Si:C ratio in the charge of 0.11 mainly consisted of a solid solution of elements in α-Fe, as well as carbides Fe3C and Fe3W3C. At the Si:C ratios in the charge of 0.28 and 0.52, along with a solid solution of the elements in α-Fe, Fe8Si2C, Fe5Si3, and FeSiC, FeSi2 manifested themselves, respectively. The microstructure of the alloy demonstrated a clear manifestation of several phases with different content of alloying elements. Changing a Si:C ratio in the charge from 0.11 to 0.28 and 0.52 led to an increase in the residual silicon content (wt %) in the studied areas, from 0.00–0.25 to 0.12–1.79 and 0.20–2.11, respectively. At the same time, the carbon content (wt %) in the examined areas varied from 0.25–2.12 to 0.24–2.52 and 0.45–2.68, respectively. The content of alloying elements in the investigated areas varied within (wt %): W – 0.00–43.06, Mo – 0.00–32.72, V – 0.19–20.72, Cr – 0.69–33.94, Co – 0.00–3.96. Analysis of the study’s results reveals that the most acceptable ratio of Si:C in the charge is 0.52. In this case, there is a certain content of residual silicon along with carbon in the form of carbosilicide and silicide compounds. Such indicators of the alloy provide sufficient reducing capacity of the alloy when used. The properties of the alloy make it possible, when smelting steels, to replace part of those standard ferroalloys that do not have strict carbon restrictions.

  • Open Access

    Identification of the features of structural-phase transformations in the processing of waste from the production of high-alloy steels

    by Viacheslav Borysov, Tetiana Solomko, Mykhail Yamshinskij, Ivan Lukianenko, Bohdan Tsymbal, Andrey Andreev, Viacheslav Bratishko, Tamara Bilko, Victor Rebenko, Tetiana Chorna

    This paper reports a study into the peculiarities of the structural-phase composition of the alloy obtained by using anthropogenic waste from the production of high-alloy steels involving reduction melting. That is necessary for determining the technological parameters that could help decrease the loss of alloying elements in the process of obtaining and using a doped alloy. This study has shown that at an O:C ratio in the charge of 1.84, the alloy consisted mainly of the solid solution of carbon and alloying elements in α-Fe. The manifestation of Fe3C C carbide with alloying elements as substitution atoms was of relatively weak intensity. At the O:C ratios in the charge of 1.42 and 1.17, there was an increase in the intensity of the Fe3C carbide manifestation. At the same time, the emergence of the carbide compounds W2C·Mo2C and WC was identified. Several phases with different content of alloying elements were present in the microstructure images. Cr content in the examined areas changed in the range of 0.64–33.86 % by weight; W content reached 41.58 % by weight; Mo –19.53 % by weight; V – 18.55 % by weight; Co – 3.95 % by weight. The carbon content was in the range of 0.28–2.43 % by weight. Analysis of the study results reveals that the most favorable ratio of O:C in the charge was 1.42. At the same time, the phase composition was dominated by a solid solution of the alloying elements and carbon in α-Fe. The share of the residual carbon concentrated in the carbide component was in the range of 0.52–2.11 % by weight, thereby ensuring the required reduction capability of the alloy when used. The study reported here has made it possible to identify new technological aspects of obtaining an alloy by utilizing anthropogenic waste, and whose indicators provide for the possibility of replacing part of standard ferroalloys when smelting steels without strict restrictions on carbon content.

  • Open Access

    Identification of patterns in the structural and phase composition of the doping alloy derived from metallurgical waste processing

    by Anatolii Poliakov, Anatolii Dzyuba, Vadym Volokh, Artem Petryshchev, Bohdan Tsymbal, Mykhail Yamshinskij, Ivan Lukianenko, Andrey Andreev, Tamara Bilko, Victor Rebenko

    This paper reports a study into the structural-phase composition of the doping alloy made by processing metallurgical anthropogenic waste involving reduction smelting. This is required for determining the technological parameters that ensure an increase in the level of extraction of target elements during the processing of anthropogenic waste and for the further use of the doping alloy. It was revealed that the phase composition of the doping alloy manifested a solid solution of the doping elements and carbon in α-Fe. Cementite Fe3C and silicides Fe5Si3, FeSi, and FeSi2 were also identified. In this case, the doping elements were more likely to act as substitution atoms. It has been determined that the microstructure of the alloy consisted of several phases of different shapes and contents of the basic doping elements. Sites with an elevated iron level of up to 95.87 % by weight in the composition could be represented by the solid solution phase of the doping elements and carbon in α-Fe. The sites with a relatively high (% by weight) content of carbon (0.83‒2.17) and doping elements ‒ W, up to 39.41; Mo, up to 26.17; V, to 31.42; Cr, to 9.15 ‒ were apparently of a carbide nature. The sites with a silicon content of 0.43‒0.76 % by weight likely included silicide compounds. The alloy's characteristics make it possible to smelt steel grades without strict carbon restrictions, replacing some of the standard ferroalloys. Neither phases nor compounds with a relatively high propensity for sublimation were identified in the material produced. Therefore, there is no need to provide conditions to prevent evaporation and loss in the gas phase of the doping elements. That could increase the degree of extraction of the doping elements


  • Open Access

    Determining the thermal mode of bio-based raw materials composting process in a rotary-type chamber

    by Gennadii Golub, Ivan Grabar, Dmytro Derevyanko, Anna Нolubenko, Oleksandr Medvedskyi, Viacheslav Chuba, Oleksandr Solarov, Tamara Bilko, Maksym Pavlenko, Anatolii Saienko

    One of the promising methods to dispose of agricultural bio-based raw materials is to produce compost by aerobic fermentation in rotary chambers. High efficiency of the composting process is achieved when a proper temperature mode is maintained at each phase of the process. Changes in temperature are directly related to the effective transformation of organic substrates by microorganisms and are the reason for the low quality of produced compost in terms of its agrochemical and microbiological parameters. It was established that a high-temperature regime is achieved on the condition that the amount of heat released during the biodegradation of raw materials by microorganisms is greater than the heat loss associated with the substrate aeration and surface cooling. Therefore, the time during which the fermented mass remains warm depends entirely on the substrate's physical-chemical characteristics, the parameters of the equipment, and the modes of its operation. To describe the established conditions, based on the equation of thermal balance, a mathematical model has been built. The model relates the thermal costs necessary to maintain the optimal temperature regime of the process to the substrate's moisture content and specific active heat generation, as well as to such an important thermal physical parameter of the chamber as the coefficient of heat transfer of the wall material. A rotary chamber was manufactured to investigate the thermal mode of the bio-based raw materials composting process. It has been experimentally established that the chamber walls' heat transfer coefficient of 1.6 W/(m2·°C), a value of the substrate's specific active heat generation of 9.2 W/kg, and a moisture content of 58 % provide for the thermal needs for the process with the release of 140 MJ of excess heat. The reported study could be the basis for the modernized methodology of thermal calculations of the bio-based raw materials composting process in closed fermentation chambers