Ihor Volkov
Ihor Volkov has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Maksim Balandin
Hetman Petro Sahaidachnyi National Army Academy, Lviv, Ukraine, Lviv, Ukraine
2 shared publications - Oleksandr Karavanov
Hetman Petro Sahaidachnyi National Army Academy
2 shared publications - Andrii Shcherba
Hetman Petro Sahaidachnyi National Army Academy
1 shared publication - Galina Semiv
Hetman Petro Sahaidachnyi National Army Academy
1 shared publication - Oksana Klyuchak
National Defense University of Ukraine
1 shared publication - Oleg Dorokhov
Національна Академія сухопутних військ імені гетьмана Петра Сагайдачного
1 shared publication
Latest Publications
- Open Access
- 25 December 2024
- Published by Hetman Petro Sahaidachnyi National Army Academy in Military Technical Collection
- No. 31,p. 92-99
Analysis of the application potential of the "Kanonir" computer artillery range in the training of ground artillery specialists
An analysis of the technical capabilities of the computer artillery range (the "Kanonir" product) has been conducted to support the training of cadets and officers in artillery units on topics such as optical and aerial reconnaissance, target detection and acquisition, and execution of fire missions against moving and stationary targets using various methods to determine fire settings. The accuracy of object placement, structures, local landmarks, and characteristic landscape points on the simulator's 3D terrain map was verified by comparing coordinates and elevations. The accuracy of determining topographic data for targets, calculating corrections for deviations from standard firing conditions, and determining fire settings for various artillery systems with standard ammunition was also checked. The possibilities of using this computer range for performing individual fire missions on simulation tools were evaluated. A comprehensive analysis of this software product's capabilities for use in the training of cadets and officers of artillery units was performed. Based on the analysis results, the primary training areas in which the "Kanonir" product is appropriate to use were identified. The results of a pedagogical experiment conducted using the "Kanonir" product in the training of cadets in the "Shooting and Fire Control" course were presented. Additionally, practical recommendations were provided for preparing, setting up, using, and, overall, improving the effectiveness of this software in the training of cadets and artillery officers.
- 25 December 2024
- Published by Hetman Petro Sahaidachnyi National Army Academy in Military Technical Collection
- No. 31,p. 92-99
Open AccessAnalysis of the application potential of the "Kanonir" computer artillery range in the training of ground artillery specialists
An analysis of the technical capabilities of the computer artillery range (the "Kanonir" product) has been conducted to support the training of cadets and officers in artillery units on topics such as optical and aerial reconnaissance, target detection and acquisition, and execution of fire missions against moving and stationary targets using various methods to determine fire settings. The accuracy of object placement, structures, local landmarks, and characteristic landscape points on the simulator's 3D terrain map was verified by comparing coordinates and elevations. The accuracy of determining topographic data for targets, calculating corrections for deviations from standard firing conditions, and determining fire settings for various artillery systems with standard ammunition was also checked. The possibilities of using this computer range for performing individual fire missions on simulation tools were evaluated. A comprehensive analysis of this software product's capabilities for use in the training of cadets and officers of artillery units was performed. Based on the analysis results, the primary training areas in which the "Kanonir" product is appropriate to use were identified. The results of a pedagogical experiment conducted using the "Kanonir" product in the training of cadets in the "Shooting and Fire Control" course were presented. Additionally, practical recommendations were provided for preparing, setting up, using, and, overall, improving the effectiveness of this software in the training of cadets and artillery officers.
- Open Access
- 31 October 2024
- Published by Ukrainian Scientific Community in Journal of Scientific Papers "Social development and Security"
- Vol. 14 (5) , 139-147
Актуальність використання сучасних навчально-тренувальних засобів для навчання громадян України, які проходять військову підготовку за програмою підготовки офіцерів запасу з вогневої підготовки
Мета роботи: Дослідження переваг та недоліків використання сучасних навчально-тренувальних засобів у процесі підготовки громадян України, які проходять військову підготовку за програмою підготовки офіцерів запасу з вогневої підготовки. Метод дослідження: аналіз, синтез, порівняння. Результати дослідження: проведено аналіз використання сучасних навчально-тренувальних засобів з вогневої підготовки для підготовки громадян України, які проходять військову підготовку за програмою підготовки офіцерів запасу. Теоретична цінність дослідження: дослідження допоможе покращити систему підготовки громадян України, які проходять військову підготовку за програмою підготовки офіцерів запасу з вогневої підготовки, що, в свою чергу, вплине на підвищення підготовленості сил оборони України в цілому. Цінність дослідження: полягає у підвищенні ефективності підготовки громадян України які проходять військову підготовку за програмою підготовки офіцерів запасу з вогневої підготовки. Майбутні дослідження: проведення детальних досліджень, які порівнюють ефективність традиційних методів навчання з новітніми технологіями, такими як віртуальна реальність або симулятори, в контексті вогневої підготовки. Тип статті: теоретична.
- 31 October 2024
- Published by Ukrainian Scientific Community in Journal of Scientific Papers "Social development and Security"
- Vol. 14 (5) , 139-147
Open AccessАктуальність використання сучасних навчально-тренувальних засобів для навчання громадян України, які проходять військову підготовку за програмою підготовки офіцерів запасу з вогневої підготовки
Мета роботи: Дослідження переваг та недоліків використання сучасних навчально-тренувальних засобів у процесі підготовки громадян України, які проходять військову підготовку за програмою підготовки офіцерів запасу з вогневої підготовки. Метод дослідження: аналіз, синтез, порівняння. Результати дослідження: проведено аналіз використання сучасних навчально-тренувальних засобів з вогневої підготовки для підготовки громадян України, які проходять військову підготовку за програмою підготовки офіцерів запасу. Теоретична цінність дослідження: дослідження допоможе покращити систему підготовки громадян України, які проходять військову підготовку за програмою підготовки офіцерів запасу з вогневої підготовки, що, в свою чергу, вплине на підвищення підготовленості сил оборони України в цілому. Цінність дослідження: полягає у підвищенні ефективності підготовки громадян України які проходять військову підготовку за програмою підготовки офіцерів запасу з вогневої підготовки. Майбутні дослідження: проведення детальних досліджень, які порівнюють ефективність традиційних методів навчання з новітніми технологіями, такими як віртуальна реальність або симулятори, в контексті вогневої підготовки. Тип статті: теоретична.
- Open Access
- 23 December 2022
- Published by Ivan Kozhedub Kharkiv National Air Force University KNAFU in Системи озброєння і військова техніка
- No. 3 (71),p. 68-74
Аналіз науково-методичних підходів до моделювання процесу функціонування розвідувально-вогневих систем
У статті проведено аналіз деяких відомих науково-методичних підходів до моделювання процесу функціонування систем військового призначення. Як відомо, процес бою є марковським випадковим процесом з дискретними станами та безперервним часом. Тому для моделювання бойових дій дуже часто використовують математичні моделі, які базуються на рівняннях Колмогорова. Математичні моделі, які базуються на системі диференційних рівнянь Колмогорова, дозволяють визначати імовірність перебування системи в тому чи іншому стані, врахувати внутрішні чинники, які впливають на функціонування системи. Однак ними не зручно користуватися при умовах, коли кількість станів, яких може набувати система, стає більше 10. Також така математична модель не враховує вогневий вплив, який здійснює протидіюча сторона. Для прогнозування процесів, які складно описати за допомогою диференційних рівнянь Колмогорова, використовуються математичні моделі, що базуються на методі динаміки середніх. Моделі, в основі яких лежить цей метод, з успіхом застосовуються для прогнозування бойових дій, в яких приймають участь великі групи тих чи інших елементів. Зміну чисельності протидіючих сторін в процесі бою зручно описувати системою диференційних рівнянь Ланчестера. Математичні моделі, які базуються на цих диференційних рівняннях, є досить гнучкими і дозволяють вивчати різноманітні бойові ситуації при здійсненні вогневого взаємовпливу протидіючих сторін. Однак у цих моделях не враховуються взаємозв’язки між підрозділами (зразками озброєння та військової техніки), що утворюються під час збройного протистояння. Одним з підходів, який, на думку авторів, дозволяє створювати математичні моделі процесу функціонування розвідувально-вогневої системи з врахуванням взаємозв’язків, які виникають у такій системі, є диференційні рівняння Лотки-Вольтерри, що досить широко використовуються при дослідженні динаміки росту популяції біологічних видів. За результатами проведених досліджень встановлено, що використання системи диференційних рівнянь Лотки-Вольтерри для створення математичної моделі при дослідженні процесу функціонування розвідувально-вогневих систем є найбільш перспективним.
- 23 December 2022
- Published by Ivan Kozhedub Kharkiv National Air Force University KNAFU in Системи озброєння і військова техніка
- No. 3 (71),p. 68-74
Open AccessАналіз науково-методичних підходів до моделювання процесу функціонування розвідувально-вогневих систем
У статті проведено аналіз деяких відомих науково-методичних підходів до моделювання процесу функціонування систем військового призначення. Як відомо, процес бою є марковським випадковим процесом з дискретними станами та безперервним часом. Тому для моделювання бойових дій дуже часто використовують математичні моделі, які базуються на рівняннях Колмогорова. Математичні моделі, які базуються на системі диференційних рівнянь Колмогорова, дозволяють визначати імовірність перебування системи в тому чи іншому стані, врахувати внутрішні чинники, які впливають на функціонування системи. Однак ними не зручно користуватися при умовах, коли кількість станів, яких може набувати система, стає більше 10. Також така математична модель не враховує вогневий вплив, який здійснює протидіюча сторона. Для прогнозування процесів, які складно описати за допомогою диференційних рівнянь Колмогорова, використовуються математичні моделі, що базуються на методі динаміки середніх. Моделі, в основі яких лежить цей метод, з успіхом застосовуються для прогнозування бойових дій, в яких приймають участь великі групи тих чи інших елементів. Зміну чисельності протидіючих сторін в процесі бою зручно описувати системою диференційних рівнянь Ланчестера. Математичні моделі, які базуються на цих диференційних рівняннях, є досить гнучкими і дозволяють вивчати різноманітні бойові ситуації при здійсненні вогневого взаємовпливу протидіючих сторін. Однак у цих моделях не враховуються взаємозв’язки між підрозділами (зразками озброєння та військової техніки), що утворюються під час збройного протистояння. Одним з підходів, який, на думку авторів, дозволяє створювати математичні моделі процесу функціонування розвідувально-вогневої системи з врахуванням взаємозв’язків, які виникають у такій системі, є диференційні рівняння Лотки-Вольтерри, що досить широко використовуються при дослідженні динаміки росту популяції біологічних видів. За результатами проведених досліджень встановлено, що використання системи диференційних рівнянь Лотки-Вольтерри для створення математичної моделі при дослідженні процесу функціонування розвідувально-вогневих систем є найбільш перспективним.
- Open Access
- 30 April 2021
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (3 (110)) , 31-42
Devising a procedure for substantiating the type and volume of redundant structural-functional elements of reconnaissance-firing systems
This paper proposes an algorithm for substantiating the type and volume of redundant structural and functional elements of reconnaissance-firing systems, taking into consideration the operational patterns of such systems. Underlying this algorithm is the combination of survivability assessment methods and reliability assessment methods. Such an arrangement aimed to improve the efficiency of the application of these methods and reduce uncertainty in the calculations. The results from calculating an example of the application of a procedure for substantiating the type and volume of redundant structural and functional elements of reconnaissance-firing systems have been analyzed. The analysis of the results shows that the set task is fulfilled, in particular the specified probability of trouble-free functioning of a reconnaissance-firing system, with a combined type of redundancy. Moreover, it implies giving preference to passive redundancy, using active one only to critical elements – individual functional elements of the control subsystem. The advantage of a mixed type of redundancy over a passive redundancy is 28 %. In addition, it has been established that the multiplicity of redundancy, for accepted conditions, should not be lower than 2. A procedure for substantiating the type and volume of redundant structural and functional elements of reconnaissance-firing systems has been devised, taking into consideration the operational patterns of such systems. The specified procedure includes an algorithm, as well as methods for assessing survivability and methods for assessing the reliability of functioning. This procedure was tested for feasibility by considering an example of justifying the type and volume of redundant structural and functional elements of reconnaissance-firing systems that produced an adequate result. The result has been confirmed by the practical application of reconnaissance-firing systems in recent armed conflicts
- 30 April 2021
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (3 (110)) , 31-42
Open AccessDevising a procedure for substantiating the type and volume of redundant structural-functional elements of reconnaissance-firing systems
This paper proposes an algorithm for substantiating the type and volume of redundant structural and functional elements of reconnaissance-firing systems, taking into consideration the operational patterns of such systems. Underlying this algorithm is the combination of survivability assessment methods and reliability assessment methods. Such an arrangement aimed to improve the efficiency of the application of these methods and reduce uncertainty in the calculations. The results from calculating an example of the application of a procedure for substantiating the type and volume of redundant structural and functional elements of reconnaissance-firing systems have been analyzed. The analysis of the results shows that the set task is fulfilled, in particular the specified probability of trouble-free functioning of a reconnaissance-firing system, with a combined type of redundancy. Moreover, it implies giving preference to passive redundancy, using active one only to critical elements – individual functional elements of the control subsystem. The advantage of a mixed type of redundancy over a passive redundancy is 28 %. In addition, it has been established that the multiplicity of redundancy, for accepted conditions, should not be lower than 2. A procedure for substantiating the type and volume of redundant structural and functional elements of reconnaissance-firing systems has been devised, taking into consideration the operational patterns of such systems. The specified procedure includes an algorithm, as well as methods for assessing survivability and methods for assessing the reliability of functioning. This procedure was tested for feasibility by considering an example of justifying the type and volume of redundant structural and functional elements of reconnaissance-firing systems that produced an adequate result. The result has been confirmed by the practical application of reconnaissance-firing systems in recent armed conflicts