Ali Sari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ali Sari has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Ömer Faruk Nemutlu
Bingöl Üniversitesi
9 shared publications - Bilal Balun
Bingöl Üniversitesi
6 shared publications - Sezer Öztürk
Fatih Sultan Mehmet Vakif University, Istanbul, Turkey
6 shared publications - Amin Bagherzadeh Azar
Istanbul Technical University (İTÜ), İstanbul, Turkey
3 shared publications - Bulent Erkmen
Ozyegin University
2 shared publications - Elif Altunsu
Istanbul University Cerrahpasa, Istanbul, Turkey
2 shared publications
Latest Publications
- 22 October 2026
- Published by Elsevier in Ocean Engineering
- Vol. 369
Influence of near-fault earthquake directionality on the seismic response of a jacket-supported offshore wind turbine
- 22 October 2026
- Published by Elsevier in Ocean Engineering
- Vol. 369
Influence of near-fault earthquake directionality on the seismic response of a jacket-supported offshore wind turbine
- Open Access
- 31 August 2026
- Published by Turkish Journal of Earthquake Research, Disaster and Emergency Management Authority in Türk Deprem Araştırma Dergisi
- Vol. 8 (2) , 226-235
2023 Kahramanmaraş (Türkiye) Depremleri Sırasında Antakya’da Gözlenen Yüksek Yatay ve Düşey İvme Değerlerinin Yapısal Hasara Etkisine İlişkin Bir Örnek Olay İncelemesi
Bu çalışma, 2023 Kahramanmaraş depremlerinin ilk ana şoku olan Pazarcık depremi sırasında Antakya’da kaydedilen yüksek yatay ve düşey yer ivmelerinin on katlı bir betonarme bina üzerindeki etkilerini incelemektedir. Bina için üç farklı yer hareketi senaryosu altında doğrusal olmayan zaman tanım alanında analizler yürütülmüştür: (1) kaydedilen yatay ve düşey bileşenlerin doğrudan kullanıldığı durum, (2) kayıtların hedef spektruma uyacak şekilde ölçeklendiği durum ve (3) yalnızca yatay bileşenlerin uygulandığı durum. Sonuçlar, gerçek kayıtların kullanıldığı durumda yaygın hasar, göçme, kat ötelemeleri ve ikinci mertebe etkilerinin belirgin biçimde arttığını göstermektedir. Düşey bileşenin ikincil bir rol oynadığı, göçme mekanizmasının ise esas olarak yatay yer hareketleri tarafından belirlendiği görülmüştür.
- 31 August 2026
- Published by Turkish Journal of Earthquake Research, Disaster and Emergency Management Authority in Türk Deprem Araştırma Dergisi
- Vol. 8 (2) , 226-235
Open Access2023 Kahramanmaraş (Türkiye) Depremleri Sırasında Antakya’da Gözlenen Yüksek Yatay ve Düşey İvme Değerlerinin Yapısal Hasara Etkisine İlişkin Bir Örnek Olay İncelemesi
Bu çalışma, 2023 Kahramanmaraş depremlerinin ilk ana şoku olan Pazarcık depremi sırasında Antakya’da kaydedilen yüksek yatay ve düşey yer ivmelerinin on katlı bir betonarme bina üzerindeki etkilerini incelemektedir. Bina için üç farklı yer hareketi senaryosu altında doğrusal olmayan zaman tanım alanında analizler yürütülmüştür: (1) kaydedilen yatay ve düşey bileşenlerin doğrudan kullanıldığı durum, (2) kayıtların hedef spektruma uyacak şekilde ölçeklendiği durum ve (3) yalnızca yatay bileşenlerin uygulandığı durum. Sonuçlar, gerçek kayıtların kullanıldığı durumda yaygın hasar, göçme, kat ötelemeleri ve ikinci mertebe etkilerinin belirgin biçimde arttığını göstermektedir. Düşey bileşenin ikincil bir rol oynadığı, göçme mekanizmasının ise esas olarak yatay yer hareketleri tarafından belirlendiği görülmüştür.
- 7 July 2025
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 50 (3) , 2817-2834
Seismic Response Assessment of Topside Equipment on Fixed Offshore Platforms
- 7 July 2025
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 50 (3) , 2817-2834
Seismic Response Assessment of Topside Equipment on Fixed Offshore Platforms
- Open Access
- 26 March 2025
- Published by Bitlis Eren Universitesi Fen Bilimleri Dergisi in Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
- Vol. 14 (1) , 610-632
Seismic Performance of the Kahramanmaraş Earthquakes: Ground Motion Prediction Models and the Role of Vertical Components
On February 6, 2023, two very large earthquakes occurred in Türkiye. These earthquakes occurred on the Eastern Anatolian Fault, one of the most active fault zones in Türkiye. After two earthquakes occurred 9 hours apart, with Pazarcık (7.7 Mw) and Elbistan (7.6 Mw) epicenters, 11 cities of the country were directly affected by the earthquake. In addition to a significant number of casualties, structural damage caused by the earthquake occurred. Ground motion prediction equations (GMPEs), in short, are used to estimate the impact/value that the acceleration/velocity/spectral parameters etc. of a wave moving from an earthquake source can create in a study area. With the help of these attenuation relations, various earthquake parameters can be estimated depending on distance. In this study, the peak ground acceleration (PGA) values obtained from the stations taking measurements during the Kahramanmaraş earthquakes were examined using 6 different attenuation relations valid for Türkiye. In the study, data from 105 different stations measured during the Kahramanmaraş earthquake were used. In addition, the vertical earthquake effect caused by the earthquake was evaluated in terms of Turkish seismic code conditions. Looking at the study results; The approach of ground classifications, the fact that the acceleration values of the Kahramanmaraş earthquake remained above the curves of the attenuation relations and the failure to consider different earthquake characteristics have shown that the current attenuation relations are weaknesses. It has been observed that earthquake data deviate in a certain distance region in all attenuation relations. The GMPEs generally did not show high agreement with the Kahramanmaraş earthquake data. For this reason, the situations that should be taken into consideration when preparing a new decay relationship are examined. Finally, it was concluded that the higher-than-expected vertical earthquake effects were not assessed correctly in the code and therefore the vertical acceleration spectra given in the code should be updated.
- 26 March 2025
- Published by Bitlis Eren Universitesi Fen Bilimleri Dergisi in Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
- Vol. 14 (1) , 610-632
Open AccessSeismic Performance of the Kahramanmaraş Earthquakes: Ground Motion Prediction Models and the Role of Vertical Components
On February 6, 2023, two very large earthquakes occurred in Türkiye. These earthquakes occurred on the Eastern Anatolian Fault, one of the most active fault zones in Türkiye. After two earthquakes occurred 9 hours apart, with Pazarcık (7.7 Mw) and Elbistan (7.6 Mw) epicenters, 11 cities of the country were directly affected by the earthquake. In addition to a significant number of casualties, structural damage caused by the earthquake occurred. Ground motion prediction equations (GMPEs), in short, are used to estimate the impact/value that the acceleration/velocity/spectral parameters etc. of a wave moving from an earthquake source can create in a study area. With the help of these attenuation relations, various earthquake parameters can be estimated depending on distance. In this study, the peak ground acceleration (PGA) values obtained from the stations taking measurements during the Kahramanmaraş earthquakes were examined using 6 different attenuation relations valid for Türkiye. In the study, data from 105 different stations measured during the Kahramanmaraş earthquake were used. In addition, the vertical earthquake effect caused by the earthquake was evaluated in terms of Turkish seismic code conditions. Looking at the study results; The approach of ground classifications, the fact that the acceleration values of the Kahramanmaraş earthquake remained above the curves of the attenuation relations and the failure to consider different earthquake characteristics have shown that the current attenuation relations are weaknesses. It has been observed that earthquake data deviate in a certain distance region in all attenuation relations. The GMPEs generally did not show high agreement with the Kahramanmaraş earthquake data. For this reason, the situations that should be taken into consideration when preparing a new decay relationship are examined. Finally, it was concluded that the higher-than-expected vertical earthquake effects were not assessed correctly in the code and therefore the vertical acceleration spectra given in the code should be updated.
- Open Access
- 31 January 2025
- Published by El-Cezeri: Journal of Science and Engineering in El-Cezeri Fen ve Mühendislik Dergisi
- Vol. 12 (1) , 9-18
Statistical analysis of Wind Characteristic and Wind Energy Potential Based on Weibull Distribution in Bingol Province, Turkey
In this study, the statistical analysis of wind energy density and wind speed distribution parameters in Bingol province was examined using hourly wind speed data measured by the General Directorate of Meteorology between 2014 and 2017. Weibull distribution was used for statistical modeling and k and c parameters were calculated for 10 m and 30 m height. According to statistical criteria, in the wind data analysis of Bingol province, it was determined that the months with the highest potential in terms of mean wind speed and wind power densities are March, April and May. In the months when mean wind speeds are the highest, the dominant wind direction is south. As a result, it is concluded that since the average monthly and annual power densities in Bingol province are about 100 W/m2. It is determined that the wind potential of the region can be used for small scale off-grid wind applications. The fact that the average speed is mostly higher than 4 m/s for 30 m hub height has shown that electrical energy generation from wind energy is promising.
- 31 January 2025
- Published by El-Cezeri: Journal of Science and Engineering in El-Cezeri Fen ve Mühendislik Dergisi
- Vol. 12 (1) , 9-18
Open AccessStatistical analysis of Wind Characteristic and Wind Energy Potential Based on Weibull Distribution in Bingol Province, Turkey
In this study, the statistical analysis of wind energy density and wind speed distribution parameters in Bingol province was examined using hourly wind speed data measured by the General Directorate of Meteorology between 2014 and 2017. Weibull distribution was used for statistical modeling and k and c parameters were calculated for 10 m and 30 m height. According to statistical criteria, in the wind data analysis of Bingol province, it was determined that the months with the highest potential in terms of mean wind speed and wind power densities are March, April and May. In the months when mean wind speeds are the highest, the dominant wind direction is south. As a result, it is concluded that since the average monthly and annual power densities in Bingol province are about 100 W/m2. It is determined that the wind potential of the region can be used for small scale off-grid wind applications. The fact that the average speed is mostly higher than 4 m/s for 30 m hub height has shown that electrical energy generation from wind energy is promising.
- Open Access
- 31 January 2025
- Published by El-Cezeri: Journal of Science and Engineering in El-Cezeri Fen ve Mühendislik Dergisi
- Vol. 12 (1) , 19-34
Review of Blast Injury and Developing Threshold Values for Human Injury
In today’s world, explosions frequently occur in terrorist bombings, industrial and manufacturing sectors, and daily life. The blast waves generated by explosions subject structures and the human body to significant blast loads. These blast loads can cause deadly structural collapses, and serious injuries or fatal outcomes can occur in various parts of the human body, such as the brain, lungs, heart, auditory system, eyes, abdominal region, and musculoskeletal system due to the impact of the blast load. Consequently, this research focused on explosions, blast injuries, injury criteria and scaling. Threshold values for blast injuries are collected from existing literature, and limit blast pressure values for different parts of the human body are proposed.
- 31 January 2025
- Published by El-Cezeri: Journal of Science and Engineering in El-Cezeri Fen ve Mühendislik Dergisi
- Vol. 12 (1) , 19-34
Open AccessReview of Blast Injury and Developing Threshold Values for Human Injury
In today’s world, explosions frequently occur in terrorist bombings, industrial and manufacturing sectors, and daily life. The blast waves generated by explosions subject structures and the human body to significant blast loads. These blast loads can cause deadly structural collapses, and serious injuries or fatal outcomes can occur in various parts of the human body, such as the brain, lungs, heart, auditory system, eyes, abdominal region, and musculoskeletal system due to the impact of the blast load. Consequently, this research focused on explosions, blast injuries, injury criteria and scaling. Threshold values for blast injuries are collected from existing literature, and limit blast pressure values for different parts of the human body are proposed.
- Open Access
- 31 October 2024
- Published by MDPI AG in Applied System Innovation
- Vol. 7 (6) , 108
A Novel Spring-Actuated Low-Velocity Impact Testing Setup
Evaluating the behavior of materials and their response under low-velocity dynamic impact (less than 30 m/s) is a challenging task in various industries. It requires customized test methods to replicate real-world impact scenarios and capture important material responses accurately. This study introduces a novel spring-actuated testing setup for low-velocity impact (LVI) scenarios, addressing the limitations of existing methods. The setup provides tunable parameters, including adjustable impactor mass (1 to 250 kg), velocity (0.1 to 32 m/s), and spring stiffness (100 N/m to 100 kN/m), allowing for flexible simulation of dynamic impact conditions. Validation experiments on steel plates with a support span of 800 mm and thickness of 5 mm demonstrated the system’s satisfactory accuracy in measuring impact forces (up to 714.2 N), displacements (up to 40.5 mm), and velocities. A calibration procedure is also explored to estimate energy loss using numerical modeling, further enhancing the test setup’s precision and utility. The results underline the effectiveness of the proposed experimental setup in capturing material responses during low-velocity impact events.
- 31 October 2024
- Published by MDPI AG in Applied System Innovation
- Vol. 7 (6) , 108
Open AccessA Novel Spring-Actuated Low-Velocity Impact Testing Setup
Evaluating the behavior of materials and their response under low-velocity dynamic impact (less than 30 m/s) is a challenging task in various industries. It requires customized test methods to replicate real-world impact scenarios and capture important material responses accurately. This study introduces a novel spring-actuated testing setup for low-velocity impact (LVI) scenarios, addressing the limitations of existing methods. The setup provides tunable parameters, including adjustable impactor mass (1 to 250 kg), velocity (0.1 to 32 m/s), and spring stiffness (100 N/m to 100 kN/m), allowing for flexible simulation of dynamic impact conditions. Validation experiments on steel plates with a support span of 800 mm and thickness of 5 mm demonstrated the system’s satisfactory accuracy in measuring impact forces (up to 714.2 N), displacements (up to 40.5 mm), and velocities. A calibration procedure is also explored to estimate energy loss using numerical modeling, further enhancing the test setup’s precision and utility. The results underline the effectiveness of the proposed experimental setup in capturing material responses during low-velocity impact events.
- Open Access
- 30 September 2024
- Published by Road and Bridge Research Institute in Roads and Bridges – Drogi i Mosty
- Vol. 23 (3) , 283-309
Failure analysis of multi-span masonry arch bridges using combination of point cloud data and three-dimensional numerical modeling
Historical structures, including historical bridges, are part of cultural heritage, conveying the traces and characteristic features of past civilizations. To protect historical structures, it is necessary to prepare their 3D photogrammetric documentation, determine detailed geometric and material properties and perform computer-aided structural analysis using appropriate modeling techniques. The aim of this study is to present an effective, reliable and fast multidisciplinary approach for the analysis of historical masonry bridges. The aforementioned approach was illustrated with an example of the historical Halilviran masonry arch bridge and its behavior under possible loadings. Terrestrial laser scanning (TLS) was used to determine the bridge geometry with high accuracy. Point cloud data obtained from TLS was simplified and a three-dimensional CAD-based solid model of the structure was created. The Halilviran Bridge case study summarized in this report was conducted to examine the technical feasibility of using la¬ser scanning technologies for obtaining as-built records for similar historic bridges. A secondary objective was to identify other applications of this technology, notably for other transportation structures, and use numerical methods to assess the seismic behavior and failure model of the bridge. The seismic behavior of the bridge was examined using a finite-element- based macromodeling technique. Nonlinear dynamic analyses were carried out subsequently to identify the most susceptible regions of the bridge. Interpretation of the results, presented in the form of contour plots illustrating tensile damage and maximum displacements, offered a comprehensive depiction of the seismic response across the entire bridge. The methodology employed in this investigation can be viewed as a robust framework for evaluating the seismic response and potential failure of historical structures.
- 30 September 2024
- Published by Road and Bridge Research Institute in Roads and Bridges – Drogi i Mosty
- Vol. 23 (3) , 283-309
Open AccessFailure analysis of multi-span masonry arch bridges using combination of point cloud data and three-dimensional numerical modeling
Historical structures, including historical bridges, are part of cultural heritage, conveying the traces and characteristic features of past civilizations. To protect historical structures, it is necessary to prepare their 3D photogrammetric documentation, determine detailed geometric and material properties and perform computer-aided structural analysis using appropriate modeling techniques. The aim of this study is to present an effective, reliable and fast multidisciplinary approach for the analysis of historical masonry bridges. The aforementioned approach was illustrated with an example of the historical Halilviran masonry arch bridge and its behavior under possible loadings. Terrestrial laser scanning (TLS) was used to determine the bridge geometry with high accuracy. Point cloud data obtained from TLS was simplified and a three-dimensional CAD-based solid model of the structure was created. The Halilviran Bridge case study summarized in this report was conducted to examine the technical feasibility of using la¬ser scanning technologies for obtaining as-built records for similar historic bridges. A secondary objective was to identify other applications of this technology, notably for other transportation structures, and use numerical methods to assess the seismic behavior and failure model of the bridge. The seismic behavior of the bridge was examined using a finite-element- based macromodeling technique. Nonlinear dynamic analyses were carried out subsequently to identify the most susceptible regions of the bridge. Interpretation of the results, presented in the form of contour plots illustrating tensile damage and maximum displacements, offered a comprehensive depiction of the seismic response across the entire bridge. The methodology employed in this investigation can be viewed as a robust framework for evaluating the seismic response and potential failure of historical structures.
- 3 September 2024
- Published by Springer Nature
- p. 515-527
An Investigation on Seismic Behaviours of Vertical and Horizontal Cylindrical Liquid Storage Tanks
- 3 September 2024
- Published by Springer Nature
- p. 515-527
An Investigation on Seismic Behaviours of Vertical and Horizontal Cylindrical Liquid Storage Tanks