KGKang Gu
Kang Gu
*This is an algorithmically generated author record based on publicly available information.
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kang Gu has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Bing Chen
Shanghai Jiao Tong Univ
7 shared publications Yan Guan
3 shared publicationsBing Chen
2 shared publicationsWanli Bi
2 shared publicationsZhengwu Jiang
2 shared publicationsChen Li
1 shared publication
Latest Publications
- 4 September 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 542
Hydration behavior and microstructural evolution of rapid-hardening magnesium oxysulfate cement incorporating ferric sulfate
- 4 September 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 542
Hydration behavior and microstructural evolution of rapid-hardening magnesium oxysulfate cement incorporating ferric sulfate
- 25 August 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 541
Hydrophobic modification and water-resistance enhancement of hemihydrate phosphogypsum-based composites
- 25 August 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 541
Hydrophobic modification and water-resistance enhancement of hemihydrate phosphogypsum-based composites
- 1 December 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 34 (12) , 04022358
Preparation of Magnesium Oxysulfate Cement with Calcined Phosphate Tailings
Recycling of phosphate tailings (PT) in cement production can reduce the amount of this solid waste and its consequent pollution. This paper used high content of calcined PT as an alternative to light-burned magnesia to prepare magnesium oxysulfate (MOS) cement. Thermal decomposition properties of PT at calcination temperature of 600°C–900°C were studied with X-ray diffraction (XRD) and scanning electron microscopy (SEM). Compressive strength, XRD, Fourier-transform infrared spectroscopy (FT-IR), and SEM were conducted to study the effects of the calcination temperature of PT (600°C–800°C) and the dosage of calcined PT (50%–100%) on the strength development and hydration mechanism of MOS cement. Results showed that the main component of PT, dolomite, partially decomposed into magnesium calcite, periclase, and calcite at 700°C; decomposed further into calcite, periclase, and lime at 800°C; and finally decomposed into lime and periclase at 900°C. The periclase sourced from calcined PT reacted with the MOS system to form brucite and (517 phase). Gypsum also was formed in the reaction. Brucite, 517 phase, and gypsum worked with the unreacted PT to build the structure and provide the source of strength. MOS paste prepared with 60% PT calcined at 700°C had the highest compressive strength, 63 MPa, at 28 days of all the mixtures. The paste prepared with 50% PT calcined at 700°C had the highest strength retention value, about 68%, after 56 days of water immersion. This study provides a method for the efficient use of PT by incorporating it into MOS cement after calcination.- 1 December 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 34 (12) , 04022358
Preparation of Magnesium Oxysulfate Cement with Calcined Phosphate Tailings
Recycling of phosphate tailings (PT) in cement production can reduce the amount of this solid waste and its consequent pollution. This paper used high content of calcined PT as an alternative to light-burned magnesia to prepare magnesium oxysulfate (MOS) cement. Thermal decomposition properties of PT at calcination temperature of 600°C–900°C were studied with X-ray diffraction (XRD) and scanning electron microscopy (SEM). Compressive strength, XRD, Fourier-transform infrared spectroscopy (FT-IR), and SEM were conducted to study the effects of the calcination temperature of PT (600°C–800°C) and the dosage of calcined PT (50%–100%) on the strength development and hydration mechanism of MOS cement. Results showed that the main component of PT, dolomite, partially decomposed into magnesium calcite, periclase, and calcite at 700°C; decomposed further into calcite, periclase, and lime at 800°C; and finally decomposed into lime and periclase at 900°C. The periclase sourced from calcined PT reacted with the MOS system to form brucite and (517 phase). Gypsum also was formed in the reaction. Brucite, 517 phase, and gypsum worked with the unreacted PT to build the structure and provide the source of strength. MOS paste prepared with 60% PT calcined at 700°C had the highest compressive strength, 63 MPa, at 28 days of all the mixtures. The paste prepared with 50% PT calcined at 700°C had the highest strength retention value, about 68%, after 56 days of water immersion. This study provides a method for the efficient use of PT by incorporating it into MOS cement after calcination.- 5 August 2022
- Published by Elsevier in Composites Part B: Engineering
- Vol. 244
Experimental research on properties of magnesium oxysulfate cement during high temperature exposure
- 5 August 2022
- Published by Elsevier in Composites Part B: Engineering
- Vol. 244
Experimental research on properties of magnesium oxysulfate cement during high temperature exposure
- 1 September 2021
- Published by Elsevier in Journal of Cleaner Production
- Vol. 313
Recycling of waste gypsum in preparation of magnesium oxychloride cement (MOC)
- 1 September 2021
- Published by Elsevier in Journal of Cleaner Production
- Vol. 313
Recycling of waste gypsum in preparation of magnesium oxychloride cement (MOC)