NKNaiwrit Karmodak

Naiwrit Karmodak

*This is an algorithmically generated author record based on publicly available information.

Naiwrit Karmodak has a total of 105 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Design principles for tunable electrocatalysis via electronic structure and orbital interactions in single-atom catalysts

    by Y. Kalyanamurthy Sahana, Vasanthapandiyan Mari, Naiwrit Karmodak

    Frontier orbital-based design principles for single-atom catalysis in electrochemical CO 2 and O 2 reductions.

  • Open Access

    Modulation of Hydroxy Functionalities in Covalent Organic Frameworks for Efficient Oxygen Reduction Reaction

    by Dev Pathak, Prakash Subramani, Y. Kalyanamurthy Sahana, Tahani A. Alrebdi, Naiwrit Karmodak, Sreekuttan M. Unni, Sharath Kandambeth

    Metal‐free catalysts are gaining increasing interest for the electrochemical oxygen reduction reaction (ORR) due to their lower cost and functionality‐dependent catalytic performance. However, controlled functionalization and establishing a clear functional‐to‐property relationship in Metal‐free heteroatom‐doped carbon‐based electrocatalysts (CMFEs) is a daunting challenge. It's also vague how much functional group (heteroatom) incorporation in CMFEs is required to achieve optimal ORR activity. Here, we utilize a hydroxy‐functionalized covalent organic framework (COF) as a predesignable, highly functionalizable platform for establishing a clear functional‐property correlation for the electrochemical ORR reaction. We observe that the incorporation of hydroxy functionalities into imine COF is highly beneficial in enhancing the ORR activity with an increase in onset potential (E onset )and half‐wave potential (E 1/2 ). Control over the number of hydroxy (‐OH) functionalities is highly essential for achieving optimal ORR activity. Among the various synthesized COFs, dihydroxy‐functionalized DATB‐COF displays the highest onset potential (0.96 V vs. RHE) and a half‐wave potential (E 1/2 ) value (0.71 V vs. RHE). Hydroxy functional group incorporation generates multiple catalytically active centers (C O and C N ) in COFs and makes ORR reaction kinetics more favorable by facilitating the formation of *OOH reaction intermediates.

  • Photon‐Resilient CsPbBr 3 Nanocrystals Achieved Through Cation‐Ligand Synergistic Surface Engineering for Cocatalyst‐Free High‐Performance CO 2 Photoreduction

    by Subarna Biswas, Samhita Sukanya, Jit Satra, Shagun Singh, Rajashree P. Mishra, Surajit Mondal, Tirthankar Saha, N. V. S. Praneeth, Nitish Kumar, Saumyakanti Khatua, et al.

    Lead halide perovskite nanocrystals (PNCs) combine strong light harvesting with favorable excited‐state properties for solar‐fuel synthesis, yet their application in CO 2 photoreduction is limited by rapid photoinduced surface degradation. Here, we overcome this limitation through cooperative cation‐ligand engineering of CsPbBr 3 PNCs by integrating surface‐associated Zn 2 + with short‐chain isophthalic acid (IPhA). This dual surface coordination reinforces halide bonding, stabilizes undercoordinated Pb sites, suppresses defect propagation, prolongs carrier lifetime, increases carrier density, and reduces charge‐transfer resistance. Mechanistic investigations, including operando Raman spectroscopy and CO‐stripping voltammetry, reveal sustained surface‐bound intermediates and favorable CO adsorption–desorption behavior during CO 2 reduction. Consequently, the Zn‐IPhA engineered PNCs sustain continuous CO and CH 4 evolution for 10 h under simulated solar irradiation and retain high activity over three consecutive 10 h cycles with only marginal performance loss. The engineered PNCs deliver cocatalyst‐free CO evolution rates of ∼55 and ∼64 µmol g −1 h −1 together with CH 4 evolution rates of ∼20 and ∼26 µmol g −1 h −1 under white‐light (1 Sun) and UV irradiation, respectively, representing the highest reported productivities among 3D PNC photocatalysts and surpassing many cocatalyst‐integrated systems. These findings establish cooperative surface coordination engineering as a general strategy for developing photon‐resilient perovskite photocatalysts for solar‐fuel generation.

  • Frontier Orbital Engineering Enables Predictive Control of CO2 Reduction Selectivity in Single-Atom Catalysts

    by Vasanthapandiyan Mari, Naiwrit Karmodak

    Single-atom catalysts (SACs) offer a promising route for electrochemical CO2 reduction, yet achieving high activity and selectivity toward post-CO products remains challenging. Here, we propose an orbital engineering strategy for porphyrin-based SACs by constructing isoelectronic systems using group VIII and IX metals coordinated with neutral (IMD, Py, PMe3) and anionic axial ligands (PhO–, PhS–, Ph2N–, and Ph2P–) to activate CO2 with high efficiency. Binding energy calculations at the HSE06 functional, combined with energy decomposition analysis, reveal that the trans-field effect modulates the binding strength of *CO, thereby governing the key step that determines selectivity. Grand canonical density functional theory (GC-DFT) calculations are performed to evaluate reaction Gibbs free energy profiles and construct activity volcano plots. We have benchmarked appropriate DFT+U functionals to match the accuracy of the HSE06 level. Among the investigated systems, group IX metal-doped SACs, particularly Rh@COFs and Ir@COFs with anionic axial ligands (PhO–, Ph2N–, and PhS–), exhibit the highest activity and selectivity toward methanol formation. Mean-field microkinetic analysis further indicates that Rh@COF-OPh, Rh@COF-NPh2, and Ir@COF-SPh outperform the Cu(211) surface, while Fe@COF with Py, IMD, Ir@COF-PPh2, and Rh@COF-SPh display comparable activity with favorable selectivity toward products beyond the two-electron CO pathway. Notably, a stronger thermodynamic preference for methanol formation compared to methane, in contrast to the Cu(211) surface, is observed. Pourbaix stability analysis reveals that active catalysts Fe, Rh, and Ir embedded COF frameworks exhibit good stability across a wide electrochemical window. This study establishes an orbital engineering strategy based on isoelectronic design and trans-axial interactions, providing a predictive framework to tune product selectivity in CO2 reduction.


  • Ambient Electrocatalytic Urea Synthesis From CO 2 and N 2 Compartmentalized by Cyclic Cu‐Trinuclear (Cu 3 )‐Ferrocene (Fc) Networking Porous‐Organic‐Polymer

    by Chandan Biswas, Nilmadhab Mukherjee, Sunidhi Brindavan, Ratul Paul, Naiwrit Karmodak, Uttam Kumar Ghorai, John Mondal

    Direct electrocatalytic co‐reduction of N 2 and CO 2 to urea remains constrained by sluggish kinetics and the absence of frameworks capable of concurrently activating both molecules. Herein, we present the first realization of a metalated porous organic polymer ( M‐POP )‐based electrocatalyst, Cu 3 Fc‐Pyz‐POP , derived from in situ formed Cu 3 (pyrazolate) triangular motif and 1,1′‐ferrocenedicarboxaldehyde through a template‐free Schiff base polymerization. The heterometallic Cu–Fe framework hosts atomically dispersed single‐site active centers that cooperatively activate and co‐reduce molecular N 2 and CO 2 , thereby promoting selective urea formation under ambient conditions. Operated in a 0.1 M KHCO 3 electrolyte under ambient conditions, Cu 3 Fc‐Pyz‐POP delivers an exceptional urea yield rate of 115.23 µgh −1 mg −1 and a Faradaic efficiency of 20.68% at –0.6 V vs RHE, surpassing its monometallic analogues. The catalyst exhibits excellent recyclability over 10 cycles and maintains stable performance during 45 h of continuous electrolysis. in situ FT‐IR spectroscopic investigation and DFT computational studies reveal that ferrocene (Fc) moieties facilitate enhanced conductivity with a dramatic decrease of HOMO‐LUMO energy gap and selective C‐N coupling between N 2 and CO 2 intermediates. Our finding establishes M‐POPs as promising platforms for ambient urea electrosynthesis, contributing to energy‐efficient fertilizer production and advancing low‐carbon chemistry.


  • Designing Nonheme Single Atom Catalysts for Oxygen Reduction Reaction by High-Throughput Screening

    by Y. Kalyanamurthy Sahana, Naiwrit Karmodak

    Heme-based single-atom catalysts (SACs) have attracted significant interest for the oxygen reduction reaction (ORR). However, their poor electrochemical stability limits catalytic performance. Inspired by reports of nonheme-based SACs in electrocatalysis, we perform a density functional theory (DFT) study of 112 heme and nonheme SACs comprising corrole, confused porphyrin, and salen frameworks with different transition metals (Sc, Ti, V, Cr, Mo, W, Mn, Fe, Ru, Os, Co, Rh, Ir, Ni, Cu, Zn) adsorbed on a graphene surface. We employ a five-step high-throughput screening framework to assess the activity and stability of the SACs. In the first step, analyzing the thermodynamic stability, two candidates with endothermic formation energies are removed. The next step involves determining the binding energies of the reaction intermediates following a four-step reaction pathway on the 110 candidates. O* and HOO* follow a linear scaling relation with HO* intermediates resembling the metal(111) surfaces. Around 47 SACs showing very strong or weak intermediate binding are eliminated from the 110 SACs. In the third step, mean-field microkinetic modeling is performed. We identify 19 SACs with activity for the 4-electron ORR comparable to that of the Pt(111) surface. The Pourbaix stability analysis for the active catalysts highlights 18 stable combinations. Fe, Rh, and Ir embedded in corrole, salen, and confused porphyrin frameworks exhibit greater stability than other metal dopants. In the final step, by incorporating electric-field effects into the microkinetic model, we obtain 14 SACs that exhibit activity comparable to that of the Pt(111) surface under alkaline conditions.


  • Open Access

    Understanding dissolution mechanism of oxide perovskites and activity tuning for O 2 evolution by surface doping

    by Shagun Singh, Naiwrit Karmodak

    We report a design principle for tuning the oxygen evolution reaction catalytic efficiency and stability of SrMnO 3 , SrFeO 3 , SrCoO 3 , and SrNiO 3 .


  • Open Access

    Water oxidation by Ni( ii ) amido-quinoline complexes

    by Monika, Vasanthapandiyan Mari, Pankaj Kumar, Naiwrit Karmodak, Basab Bijayi Dhar, Monika Loohach

    Ni( ii ) amido-quinoline complexes (NiL1, NiL2, NiL3) efficiently catalyze electrochemical water oxidation to O 2 in a non-aqueous medium, with water as the limiting reagent.


  • Dynamic Four-Membered Rings with 2π Aromaticity

    by Y. Kalyanamurthy Sahana, Tiya Garg, Vanshika Jain, D. Sravanakumar Perumalla, Naiwrit Karmodak

    Achieving structural dynamism with aromatic systems has been challenging. We show that structural dynamism could be achieved with the 2π aromatic compounds. The structural preferences and dynamic behavior of the recently synthesized four-membered rings (4MRs) isoelectronic to cyclobutadiene dication (CBD) using density functional theory with energy correction at CCSD(T) and DLPNO-CCSD(T) with the def2-TZVPP basis set are explored. The isoelectronic replacement with triel and tetrel elements in the periodic table to CBD led to several 4MRs with the molecular formula A2X2; A corresponding to B, Al, and Ga, and X to Si and Ge. Structural dynamism is investigated using the different attached substituents. Among the different 4MRs, Si2Al2, with all of the attached substituents, shows the lowest transition barrier for structural changes. We find that the aromaticity of the transition state plays a significant role in determining the dynamic behavior. Molecular dynamics simulations at room temperature confirm the structural dynamism. The orbital correlation diagram is analyzed between the ground and the transition states. The structural isomers of (LPhA)2(XPh)2, with L corresponding to N,N'-dimethyl(phenylamidinato) are investigated. Although Si2X2 compounds show more preference for cyclic isomers, Ge2X2 shows comparable stability for the cyclic and open cyclic/bicyclic structures.