Ning Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Ning Liu has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Shi-Wei Qu
School of Electronic Science and Engineering University of Electronic Science and Technology of China (UESTC) Chengdu China
5 shared publications - Shiwen Yang
University of Electronic Science and Technology of China (UESTC)
3 shared publications - Cuiping Zhang
Research Center for Tissue Repair and Regeneration Affiliated to the Medical Innovation Research Department, PLA General Hospital and PLA Medical College, Beijing, 100853, China
1 shared publication - Hang Wong
City University of Hong Kong
1 shared publication - Hongchen Jiao
School of Instrumentation and Optoelectronics Engineering, Beihang University, Beijing, China
1 shared publication - Jimin Xu
Institute of Tribology, School of Mechanical Engineering, Hefei University of Technology, Hefei, China
1 shared publication
Latest Publications
- 20 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (5) , 2240-2244
Compact and Low-Profile Dual-Polarized Phased Filtenna Array Based on Micro-Mode SIW
In this paper, a compact dual-polarized phased filtenna array is presented and characterized by an ultra-low profile and a simple structure. It is realized by introducing the novel micro-mode SIW (MMSIW) into the feeding network of a patch antenna, which not only provides a filtering response but also enhances the operating bandwidth. The size of the proposed MMSIW cavity is significantly reduced compared with that of conventional eighth-mode SIW (EMSIW) cavity, thereby ensuring the overall compactness of the array. The profile of the array is only 0.04 λc, demonstrating a notable improvement over state-of-the-art designs. The simplistic structure ensures the ease of fabrication. The center frequency of the phased filtenna array is 5GHz, with a fractional bandwidth of 20% and a 25dB stopband suppression. An 8×8 array prototype has been successfully fabricated and measured, which exhibits a stable filtering function across scanning angles ranging from 0 to ±45°. The effectiveness of the design is validated by the measured results.
- 20 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (5) , 2240-2244
Compact and Low-Profile Dual-Polarized Phased Filtenna Array Based on Micro-Mode SIW
In this paper, a compact dual-polarized phased filtenna array is presented and characterized by an ultra-low profile and a simple structure. It is realized by introducing the novel micro-mode SIW (MMSIW) into the feeding network of a patch antenna, which not only provides a filtering response but also enhances the operating bandwidth. The size of the proposed MMSIW cavity is significantly reduced compared with that of conventional eighth-mode SIW (EMSIW) cavity, thereby ensuring the overall compactness of the array. The profile of the array is only 0.04 λc, demonstrating a notable improvement over state-of-the-art designs. The simplistic structure ensures the ease of fabrication. The center frequency of the phased filtenna array is 5GHz, with a fractional bandwidth of 20% and a 25dB stopband suppression. An 8×8 array prototype has been successfully fabricated and measured, which exhibits a stable filtering function across scanning angles ranging from 0 to ±45°. The effectiveness of the design is validated by the measured results.
- 31 May 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (12) , 22031-22044
Compact unidirectional waveguide grating emitter with enhanced wavelength sensitivity based on the hybrid plasmonic mode
Waveguide grating antennas are widely adopted in beam-steering devices, typically enabling the beam steering in longitudinal direction within a two-dimensional scanning optical array by changing the input wavelength. However, traditional waveguide grating antennas suffer from limited tuning range due to low dispersion of the gratings. In this paper, a compact silicon grating waveguide antenna array is proposed with enhanced wavelength sensitivity by introducing a periodically modulated hybrid plasmonic mode. The hybrid plasmonic mode is supported by the hybrid plasmonic waveguides (HPWs) composed of silicon waveguides and periodic subwavelength silver strips. In order to convert the guided waves to the radiated waves, a series of silicon emitting segments are deposited above the HPWs. Additionally, the horizontally arranged array of HPWs also acts as a reflector of the downward radiation, resulting in an effective unidirectional emission. Through the optimization of physical parameters, the proposed antenna array achieves a wavelength-length tuning efficiency up to 0.3°/nm within the wavelength range of 1500∼1600 nm, exhibiting a significant improvement compared with traditional ones. Moreover, an average upward emissivity exceeding 80% with a maximum value of 89% within the 100 nm bandwidth is demonstrated through the numerical simulations. The proposed compact antenna array provides an alternative solution in realizing large-scale integrated high-tuning-efficiency optical beam-steering devices.
- 31 May 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (12) , 22031-22044
Compact unidirectional waveguide grating emitter with enhanced wavelength sensitivity based on the hybrid plasmonic mode
Waveguide grating antennas are widely adopted in beam-steering devices, typically enabling the beam steering in longitudinal direction within a two-dimensional scanning optical array by changing the input wavelength. However, traditional waveguide grating antennas suffer from limited tuning range due to low dispersion of the gratings. In this paper, a compact silicon grating waveguide antenna array is proposed with enhanced wavelength sensitivity by introducing a periodically modulated hybrid plasmonic mode. The hybrid plasmonic mode is supported by the hybrid plasmonic waveguides (HPWs) composed of silicon waveguides and periodic subwavelength silver strips. In order to convert the guided waves to the radiated waves, a series of silicon emitting segments are deposited above the HPWs. Additionally, the horizontally arranged array of HPWs also acts as a reflector of the downward radiation, resulting in an effective unidirectional emission. Through the optimization of physical parameters, the proposed antenna array achieves a wavelength-length tuning efficiency up to 0.3°/nm within the wavelength range of 1500∼1600 nm, exhibiting a significant improvement compared with traditional ones. Moreover, an average upward emissivity exceeding 80% with a maximum value of 89% within the 100 nm bandwidth is demonstrated through the numerical simulations. The proposed compact antenna array provides an alternative solution in realizing large-scale integrated high-tuning-efficiency optical beam-steering devices.
- 8 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (2) , 613-617
Dual-Polarized Phased Array With Ultralow Profile for Wide-Angle Scanning Application
A wideband dual-polarized planar phased antenna array with an ultra-low profile is proposed in this paper. Under the stringent restriction of a low profile of 0.04 λ c (wavelength at the center frequency), the array is inevitably challenged by a significant impedance mismatch when large scanning angles are desired. By integrating the open stubs and extended metal strips into the feeding networks, the strong current imbalance is mitigated, thereby achieving wideband and wide-angle scanning application. Finally, an impedance bandwidth of 2 ∼ 2.9 GHz with the active voltage standing-wave ratio (VSWR) nearly less than 3 is achieved when the steering angle is up to ±60° in both E and H planes. A 5×5 array prototype is fabricated and measured to validate the effectiveness of the proposed design.
- 8 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (2) , 613-617
Dual-Polarized Phased Array With Ultralow Profile for Wide-Angle Scanning Application
A wideband dual-polarized planar phased antenna array with an ultra-low profile is proposed in this paper. Under the stringent restriction of a low profile of 0.04 λ c (wavelength at the center frequency), the array is inevitably challenged by a significant impedance mismatch when large scanning angles are desired. By integrating the open stubs and extended metal strips into the feeding networks, the strong current imbalance is mitigated, thereby achieving wideband and wide-angle scanning application. Finally, an impedance bandwidth of 2 ∼ 2.9 GHz with the active voltage standing-wave ratio (VSWR) nearly less than 3 is achieved when the steering angle is up to ±60° in both E and H planes. A 5×5 array prototype is fabricated and measured to validate the effectiveness of the proposed design.
- 10 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (12) , 11617-11628
Irregular Phased Array Architecture With Small Directivity Drop for Wide-Angle Scanning Application
A novel irregular phased array tiled by subarrays composed of two isolated elements (SCTIE) is proposed in this paper. At first, reasons of significant directivity drop in traditional polyomino-shaped irregular arrays in large-angle scanning scenario are investigated. To reduce the quantization errors of the excitations, the two elements in this proposed irregular array are interleaved with one element which belongs to another subarray. Secondly, to solve the complex double-element irregular subarray tiling problem, a new approach named Subarray Rotation Algorithm based on Monte Carlo algorithm is proposed. Since the problem is no longer regarded as a nonlinear pure integer programing problem as that in previous research but a simplified element-location transformation problem, the proposed method can dramatically reduce the optimization time to 0.07% for an array as large-scale as 36×36. Consequently, through the two steps of array tiling generation and excitation coefficients optimization, better radiation performance is realized based on the SCTIE-shaped irregular arrays compared with conventional domino-shaped arrays. In addition, the proposed irregular array achieves stable performance in a broad frequency band and in different array scales. Finally, several numerical examples are presented to verify the proposed method.
- 10 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (12) , 11617-11628
Irregular Phased Array Architecture With Small Directivity Drop for Wide-Angle Scanning Application
A novel irregular phased array tiled by subarrays composed of two isolated elements (SCTIE) is proposed in this paper. At first, reasons of significant directivity drop in traditional polyomino-shaped irregular arrays in large-angle scanning scenario are investigated. To reduce the quantization errors of the excitations, the two elements in this proposed irregular array are interleaved with one element which belongs to another subarray. Secondly, to solve the complex double-element irregular subarray tiling problem, a new approach named Subarray Rotation Algorithm based on Monte Carlo algorithm is proposed. Since the problem is no longer regarded as a nonlinear pure integer programing problem as that in previous research but a simplified element-location transformation problem, the proposed method can dramatically reduce the optimization time to 0.07% for an array as large-scale as 36×36. Consequently, through the two steps of array tiling generation and excitation coefficients optimization, better radiation performance is realized based on the SCTIE-shaped irregular arrays compared with conventional domino-shaped arrays. In addition, the proposed irregular array achieves stable performance in a broad frequency band and in different array scales. Finally, several numerical examples are presented to verify the proposed method.
- Open Access
- 20 September 2021
- Published by Springer Nature in Journal of Superconductivity and Novel Magnetism
- Vol. 34 (12) , 3131-3140
Contactless Mechanical Power Transmission Through the High-Tc Superconducting Pinning Effect
Mechanical power transmission (MPT) components are almost indispensable for every engineering equipment with motions. In order to satisfy some rigorous requirements, such as contamination free and zero leakage in the mixing process of biomedical solutions, a contactless MPT mode was proposed in this study based on the high-Tc superconducting flux pinning mechanism. It makes the stirring container with the driven part inside that can be totally isolated from the external environment. The physical principle of superconducting flux pinning effect was discussed firstly to explore a feasible structural scheme, which can completely restrain all the six degrees of freedom (DOFs) by the linkage of magnetic flux lines. Then, a measurement device was established to verify and investigate the proposed contactless MPT mode. The motion can be transferred synchronously from the superconducting driving part to the permanent magnet driven part since they are unified as an integrity through the pinned flux lines. The influence of driving speed, cooling clearance, and magnet arrangement on the transmitted torque was analyzed. The verified contactless MPT mode also has the advantages of self-stability and overload protection, which can avoid the drawbacks of traditional permanent magnetic transmission mode.
- 20 September 2021
- Published by Springer Nature in Journal of Superconductivity and Novel Magnetism
- Vol. 34 (12) , 3131-3140
Open AccessContactless Mechanical Power Transmission Through the High-Tc Superconducting Pinning Effect
Mechanical power transmission (MPT) components are almost indispensable for every engineering equipment with motions. In order to satisfy some rigorous requirements, such as contamination free and zero leakage in the mixing process of biomedical solutions, a contactless MPT mode was proposed in this study based on the high-Tc superconducting flux pinning mechanism. It makes the stirring container with the driven part inside that can be totally isolated from the external environment. The physical principle of superconducting flux pinning effect was discussed firstly to explore a feasible structural scheme, which can completely restrain all the six degrees of freedom (DOFs) by the linkage of magnetic flux lines. Then, a measurement device was established to verify and investigate the proposed contactless MPT mode. The motion can be transferred synchronously from the superconducting driving part to the permanent magnet driven part since they are unified as an integrity through the pinned flux lines. The influence of driving speed, cooling clearance, and magnet arrangement on the transmitted torque was analyzed. The verified contactless MPT mode also has the advantages of self-stability and overload protection, which can avoid the drawbacks of traditional permanent magnetic transmission mode.
- 24 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 20 (5) , 733-737
Linear Phased Array Antenna Fed by the Modified Dielectric Image Line
A linear phased array antenna fed by the modified dielectric image line (DIL) is proposed in this letter. The array contains 16 subarrays, and one subarray consists of eight patch antenna elements fed by one modified DIL through eight coupling apertures on the ground plane. The modified DIL can enhance the electromagnetic field confinement in the DIL, which is beneficial to reduce the mutual coupling between parallel DILs. According to the measured results, the coupling between two modified DILs has been reduced by about 5 dB compared with that in the original DILs when the length is 160.5 mm. Finally, the proposed array achieves a wide fractional bandwidth of over 20% with voltage standing-wave ratio (VSWR) less than 2.5 when scanning up to ±60° in the H-plane in 8∼10 GHz. The isolation between the two adjacent ports is higher than 20 dB. A 16 × 8 array prototype is measured to verify the validity of the design.
- 24 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 20 (5) , 733-737
Linear Phased Array Antenna Fed by the Modified Dielectric Image Line
A linear phased array antenna fed by the modified dielectric image line (DIL) is proposed in this letter. The array contains 16 subarrays, and one subarray consists of eight patch antenna elements fed by one modified DIL through eight coupling apertures on the ground plane. The modified DIL can enhance the electromagnetic field confinement in the DIL, which is beneficial to reduce the mutual coupling between parallel DILs. According to the measured results, the coupling between two modified DILs has been reduced by about 5 dB compared with that in the original DILs when the length is 160.5 mm. Finally, the proposed array achieves a wide fractional bandwidth of over 20% with voltage standing-wave ratio (VSWR) less than 2.5 when scanning up to ±60° in the H-plane in 8∼10 GHz. The isolation between the two adjacent ports is higher than 20 dB. A 16 × 8 array prototype is measured to verify the validity of the design.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Indoor Localization with Spatial and Temporal Representations of Signal Sequences
Indoor localization has attracted considerable attention lately, due to its large commercial and social values in smart cities. The existing indoor localization approaches mostly rely on fingerprint techniques, and many of those leverage either spatially discrete fingerprints or temporally consecutive ones for localization, which either suffers from large errors due to signal ambiguities or high time overhead with long sequences. To achieve high accuracy with low computational cost, we propose ST-Loc, a deep neural network that extracts features from multiple representations of a single signal sequence for localization, where each representation indicates a corresponding signal structure with underlying feature correlations. Taking geomagnetism as an example, we infer location features from two different representations, e.g., spatial and temporal. In spatial representation, a signal sequence is converted to a signal heatmap, where each pixel corresponds to a spatial location and the value indicates fingerprint. Temporal representation, on the other hand, is a signal sequence with ordered readings, which provides temporal correlations. Using these different representations, we employ convolutional and recurrent networks to extract location features and fuse them to generate more distinguishing features for localization. We have conducted extensive experiments in two different trial sites, a narrow office area and a spacious food plaza. Our experimental results show that ST- Loc achieves more than 43% average localization error reduction compared with state-of-the-art competing schemes in both trial sites.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Indoor Localization with Spatial and Temporal Representations of Signal Sequences
Indoor localization has attracted considerable attention lately, due to its large commercial and social values in smart cities. The existing indoor localization approaches mostly rely on fingerprint techniques, and many of those leverage either spatially discrete fingerprints or temporally consecutive ones for localization, which either suffers from large errors due to signal ambiguities or high time overhead with long sequences. To achieve high accuracy with low computational cost, we propose ST-Loc, a deep neural network that extracts features from multiple representations of a single signal sequence for localization, where each representation indicates a corresponding signal structure with underlying feature correlations. Taking geomagnetism as an example, we infer location features from two different representations, e.g., spatial and temporal. In spatial representation, a signal sequence is converted to a signal heatmap, where each pixel corresponds to a spatial location and the value indicates fingerprint. Temporal representation, on the other hand, is a signal sequence with ordered readings, which provides temporal correlations. Using these different representations, we employ convolutional and recurrent networks to extract location features and fuse them to generate more distinguishing features for localization. We have conducted extensive experiments in two different trial sites, a narrow office area and a spacious food plaza. Our experimental results show that ST- Loc achieves more than 43% average localization error reduction compared with state-of-the-art competing schemes in both trial sites.
- 1 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Polarization-fluctuation induced drift in resonant fiber optic gyro using an air-core photonic-bandgap fiber
We present an analytical model of the drift in the air-core photonic-bandgap fiber (PBF) resonator optic gyroscope caused by temperature-driven polarization instability. Air-core PBF resonator based on micro-optical structure has been demonstrated and the finesse of the resonator is 7.5. Experimental results show that the gyro bias stability still seriously affected by the thermally induced polarization instability. By carefully controlling the temperature, a bias stability of 0.0034°/s has been demonstrated.
- 1 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Polarization-fluctuation induced drift in resonant fiber optic gyro using an air-core photonic-bandgap fiber
We present an analytical model of the drift in the air-core photonic-bandgap fiber (PBF) resonator optic gyroscope caused by temperature-driven polarization instability. Air-core PBF resonator based on micro-optical structure has been demonstrated and the finesse of the resonator is 7.5. Experimental results show that the gyro bias stability still seriously affected by the thermally induced polarization instability. By carefully controlling the temperature, a bias stability of 0.0034°/s has been demonstrated.