XLXin Li

Xin Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xin Li has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • IBKA-CEEMDAN-SPMF Algorithm for Denoising Electromagnetic Radiation in Loaded Coal–Rock

    by Xin Li, Qiaochu Zhang, Zhen Yang, Jing Zhou, Hao Li, Lei Han, Yuanpeng Zhao

    The electromagnetic signals generated during the coal rock loading process are prone to interference from environmental noise, making direct analysis difficult. To effectively extract the electromagnetic radiation characteristics during the fracture process, this paper proposes a modal component optimization method based on the multi-strategy improved black-wing kite algorithm (IBKA), the smooth-peak feature fusion classification (SPMF), and combines wavelet adaptive threshold denoising and CEEMDAN decomposition to construct the IBKA-CEEMDAN-SPMF joint denoising framework. By superimposing the spindle-shaped oscillation wave-form and the trend term to construct the simulated signal, the performance of each stage of the algorithm was systematically simulated and verified through single-axis loading experiments. The results show that the improved IBKA increases the convergence speed of CEEMDAN decomposition by 15% and improves the accuracy by 8.3%; the SPMF classification method can achieve more stable and reliable signal reconstruction; compared with other methods, the signal-to-noise ratio is improved by 13 dB. IBKA-CEEMDAN-SPMF shows excellent denoising ability in both simulated and measured signals, and the noise ratio of the denoised signal is the lowest at 0.0928, with the maximum noise ratio reduction of 53.9% compared to other comparison methods. The research proves that this method can be embedded in the precursory recognition models of time-domain, frequency-domain and mixed signals, providing effective technical support for the multi-source information fusion of coal rock dynamic disaster monitoring.


  • Study on the Coupling Model of Electromagnetic Radiation and Axial Strain for Coal–Rock Mass Failure Under Load

    by Zhen Yang, Kehang Yu, Xin Li, Hao Li, Yuanpeng Zhao, Feng Feng, Huayang Lu, Xuejiao Wang

    To conduct an in-depth study of the pre-fracture process of composite coal-rock bodies under varying loading rates and coal content, the axial strain characteristics and electromagnetic radiation (EMR) theory related to the fracture were analyzed. An EMR -axial strain coupling model was derived and established, and this was analyzed and verified through uniaxial loading experiments. The experiments used composite coal-rock samples with three different coal ratios (1:1:1, 1:2:1, 1:4:1) and tested them under three loading rates of 0.3, 0.4, 0.5 mm/min, focusing on the response patterns of axial strain and EMR. The results indicate that the established EMR-axial strain model has high accuracy, the EMR intensity has high sensitivity to the change of axial strain, and the two have a strong correlation. Through the collection and analysis of data, it can be used as the basis for describing the first three stages of the fracture process of loaded coal-rock mass. The increase in coal proportion of composite coal-rock mass causes changes in axial strain, leading to a continuous increase in EMR amplitude variation in each stage. However, the overall EMR intensity increases slowly first and then rapidly with the increase of axial strain, which proves the correctness of the established coupling model. Under different loading rate conditions, an increase in the loading rate will significantly increase the strain rate, leading to an enhancement in the amplitude of EMR. However, the relationship between the change in axial strain and the intensity of EMR exhibits a cubic nonlinear relationship, which satisfies the established coupling model. This study not only reveals how the coal proportion and loading rate influence the evolution pattern of EMR and axial strain, but also provides a crucial theoretical basis and technical support for identifying precursors to coal-rock instability and issuing early warnings for rock bursts through the established coupling model.

  • Research on Life Detection Algorithm Based on UWB

    by Zhen Yang, Yan Li, Xin Li, Lei Han, Qi Liu

  • Open Access

    Multitarget Detection of Transmission Lines Based on DANet and YOLOv4

    by Zhen Yang, Xuefei Xu, Keke Wang, Xin Li, Chi Ma

    In order to accurately identify targets such as insulators, shock hammers, bird nests, and spacers on high-voltage transmission lines, this paper proposes a multitarget detection model for transmission lines based on DANet and YOLOv4. First, the DANet and YOLOv4 are fused to solve the difficulty in understanding the scene and the discrimination of pixels caused by the complex and diverse scenes of UAV’ (unmanned aerial vehicle) aerial images (lighting, viewing angle, scale, occlusion, and so on) so as to improve the significance of the detection target. Gaussian function and KL (Kullback–Leibler) divergence are used to improve the nonmaximum suppression in YOLOv4 so as to improve the recognition rate of occluded targets; the focal loss function and the balanced cross entropy function are used to improve the loss function of YOLOv4 in order to reduce the impact of not only the imbalance between the background and the detection target but also the imbalance among the samples, which is aimed at improving the accuracy of the detection. Then, a data set is made for the experiment by using the UAV inspection image provided by a power grid company in Eastern Inner Mongolia. Finally, the algorithm proposed in this paper is compared with other target detection algorithms. Experimental results show that the average detection accuracy of the proposed algorithm can reach 94.7%, and the detection time of each image is 0.05 seconds. The method has good accuracy, real-time, and robustness.


  • Open Access

    Variation Law of Infrared Radiation Temperature of Unloading Fracture of Composite Coal-Rock

    by Xin Li, Xue Wang, Zhen Yang, Hao Li, Yan Li, Weiman Sun

    For composite mining coal-rock dynamic disaster, combining the theory of thermodynamics, damage mechanics, and other disciplines, the thermodynamic coupling mathematical model of composite coal-rock under an unloading condition is deduced, and the simulation model of composite coal-rock is established for numerical simulation. And the variation law of thermal infrared radiation under triaxial loading and unloading of composite coal-rock is analyzed and verified by experiments. The results show the following findings: (1) The distribution of thermal infrared radiation temperature of composite coal-rock is different in different stages of stress. The overall temperature of the temperature field is lower than the initial temperature field in the three-dimensional stress loading stage and the stage of stress-keeping pressure, but the internal temperature of the coal body is the highest. In the first stage of “loading and unloading,” the temperature of a coal seam increases slightly, and the temperature of other parts of the rock layer increases except for the circular low-temperature zone. In the second stage of “loading and unloading,” an alternating zone of high and low temperatures appears in the rock mass, and the temperature field is enhanced, among which the temperature field reaches the strongest after unloading the confining pressure. After jumping over the maximum stress, the temperature field decreases as a whole at the instability and rupture stage. (2) The variation of surface average thermal infrared radiation temperature () of composite coal-rock can be divided into the initial fluctuation stage, the linear heating stage, the local decline stage, the temperature sudden increase stage, and the fracture decline stage. At three different unloading rates of 0.003 MPa/s, 0.03 MPa/s, and 0.05 MPa/s, the of coal body, floor rock, and roof rock reach the maximum before composite coal-rock instability and fracture, and the temperature change of the coal body is the most obvious. (3) Under different confining pressure unloading rates, the of roof rock, coal body, and floor rock shows a strong linear relationship with stress after linear fitting. And the correlation between simulation and experimental results after fitting is above 0.89. The larger the confining pressure unloading rate is, the shorter the peak time of arrives, and the larger the peak value. The comparison between the experimental results and the simulation analysis shows that the two results are consistent, and the research results can provide a theoretical basis for the prevention and control of dynamic disasters in coal and rock mining.


  • Open Access

    A Method of UWB Radar Vital Detection Based on P Time Extraction of Strong Vital Signs

    by Zhen Yang, Jiming Cheng, Qingjie Qi, Xin Li, Yuning Wang

    The vital sign information in the echo signal of the UWB radar is weak, because of the interference of complex noise. In this paper, a method named P times extraction of strong vital signs for processing echo signals of UWB radars is proposed. Different noises can be distinguished by the cumulative probability distribution of the echo signal and using different methods for processing according to corresponding characteristics. The vital sign information which most clearly represents the trapped person is selected using P times extraction of strong vital signs; then, the respiration and heartbeat rates are extracted. At 5 different distances, multiple sets of tests were carried out on static trapped persons and micromovement trapped persons and using a computer to extract vital signs from the obtained data. Experimental data shows that the algorithm proposed in this paper can extract the respiration and heartbeat rates of trapped persons, with small relative errors and variances, and has a certain reference value for UWB radar signal processing.


  • Open Access

    Applications of TVF‐EMD in Vital Signal Detection for UWB Radar

    by Zhen Yang, Chi Ma, Qingjie Qi, Xin Li, Yan Li

    When using pulsed ultra‐wideband radar (UWB) noncontact detection technology to detect vital signs, weak vital signs echo signals are often covered by various noises, making human targets unable to identify and locate. To solve this problem, a new method for vital sign detection is proposed which is based on impulse ultra‐wideband (UWB) radar. The range is determined based on the continuous wavelet transform (CWT) of the variance of the received signals. In addition, the TVF‐EMD method is used to obtain the information of respiration and heartbeat frequency. Fifteen sets of experiments were carried out, and the echo radar signals of 5 volunteers at 3 different distances were collected. The analysis results of the measured data showed that the proposed algorithm can accurately and effectively extract the distance to the target human and its vital signs information, which shows vast prospects in research and application.


  • Open Access

    Multifield Coupling Mechanism of Unloading Deformation and Fracture of Composite Coal‐Rock

    by Zhen Yang, Yan Li, Xin Li, Jiayu Zhuang, Hao Li, Xue Wang, Yuning Wang

    The deformation and fracture evolution of coal and rock under unloading are prone to sudden instability or dynamic damage. To solve the problem, this paper combines interdisciplinary theories such as damage mechanics and electromagnetic field theory. The mathematical model of multiphysics coupling during loading and unloading of composite coal‐rock is deduced. In addition, numerical simulations along with experimental verification are carried out to study multi‐physical field variation and coupling mechanisms. The composite coal‐rock deforms and ruptures under unloading, and the brittle failure of the rock body becomes more sudden when the confining pressure is unloaded. Macroscopically, many microcracks are generated and expanded during the loading and unloading of composite coal‐rock. Microscopically, the internal old molecular chains are broken to form new molecular chains by the force. Simulation results show that, during the loading and unloading process, the three physical fields of the composite coal‐rock all change regularly. During the unloading of coal and rock, there is a transition period in which the temperature increases sharply and reaches the maximum. Then, the temperature decreases due to the gradual decrease of its bearing capacity. Besides, the electromagnetic field is strongest on the surface of the coal body, and its propagation in the air decays exponentially. There are small fluctuations that appear at the junction of the coal body and the air. The experimental results show that the internal infrared radiation temperature of the composite coal‐rock decreases during the initial stage of loading and unloading due to the discharge of internal gas. In the first stage of “loading and unloading,” it increases with the increase in stress, and the temperature suddenly increases in a short time after unloading. The electromagnetic radiation fluctuates in small amplitudes at the initial stage. When the stress is about to reach the peak, the electromagnetic radiation intensity increases and reaches the peak suddenly. Then, the coal‐rock ruptures, the stress decreases, and the electromagnetic radiation weakens. The experiment and simulation results are consistent. The multiphysics coupling model is used to study the characteristics of coal and rock unloading under complex conditions, providing a theoretical basis and new method for the prediction and forecast of coal and rock mining dynamic disasters.


  • Open Access

    Experimental Study on Triaxial Unloading Failure of Deep Composite Coal‐Rock

    by Xin Li, Hao Li, Zhen Yang, Zhongxue Sun, Jiayu Zhuang, Chongxiao Song, Xue Wang

    With the deep mining of coal, the phenomenon of high ground stress is more likely to cause dynamic disaster. In view of the above problems, this paper takes the unloading process of coal mining as the background to study the effects of mining rates under different conditions on the mechanical properties and triaxial failure criterion of composite coal‐rock, so as to provide a theoretical basis for the prevention and control of dynamic disasters in coal mines. The composite coal‐rock models with a composite ratio of 1 : 1 : 1 were tested under different unloading rates or confining pressures. The results show that the triaxial unloading process of coal‐rock can be divided into five stages: compaction, single elasticity, elastic‐plastic unloading, partial fracture, and complete fracture. In this paper, the failure criterion of composite coal‐rock triaxial unloading is derived. The unloading rate has an exponential relationship with the triaxial compressive strength, and the relationship between initial confining pressure and compressive strength is linear. The triaxial compressive strength is determined by both. The peak strains ε of all samples under different unloading conditions were around 0.01. And initial confining pressure had an influence on the strain variation trend during the unloading of composite coal‐rock. The higher the initial confining pressure, the greater the elastic modulus. In addition, an increase of initial confining pressure led to the increase of the total energy converted into dissipated part in the process of fracture and caused the obvious increase of the rebound characteristics of the curve. However, the unloading rate had no influence on the strain trend.