Fabian Nitschke
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fabian Nitschke has a total of 77 co-authors. Here are the top co-authors by number of shared publications:
- Thomas Kohl
Karlsruhe Institute of Technology
14 shared publications - Sebastian Held
Institute of Applied Geosciences, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
7 shared publications - Valentin Goldberg
Karlsruhe Institute of Technology
6 shared publications Thomas Neumann
4 shared publications- Tobias Kluge
Karlsruhe Institute of Technology
4 shared publications - Maziar Gholami Korzani
Institute of Applied Geosciences, Karlsruhe Institute of Technology, Karlsruhe, Germany
3 shared publications
Latest Publications
- Open Access
- 24 March 2026
- Published by Elsevier in SSRN Electronic Journal
Potential Assessment of Critical Raw Materials from European Geothermal Fluids
The energy transition is accompanied by a growing demand for raw materials. The EU Critical Raw Materials Act (CRMA) foresees at least 10% of raw material supply covered by domestic sources. Geothermal fluids have the potential to contribute significantly achieving this target. Beyond the well-known and extensively studied lithium resources in European geothermal fluids, additional potential for other elements exists. We assess the potential of 64 elements in geothermal fluids that are defined as critical and strategic raw materials or raw materials in general under the CRMA, which entered into force in May 2024. This assessment is based on more than 4000 geothermal fluid analyses across Europe. In summary, 13 of the 64 assessed elements are identified to provide the largest potential based on (a) their concentrations in geothermal fluids, (b) their ability to contribute to domestic supply and reduce supply-chain risks, (c) their potential market value, and (d) their geostrategic importance. These elements are Li, B, Mg, Si, Mn, Ge, As, Rb, Sr, Cs and Pb with high reliability and Sc and Pd with low reliability. At the lower end of the spectrum are nine elements with the lowermost potentials (Se, Zr, Nb, In, Sn, Te, Ta, Re, Bi) and the Rare Earth Elements. Our evaluation framework simultaneously considers abundance and availability, economic potential and geostrategic and environmental aspects, thereby improving comparability across elements. Having identified these 13 promising candidates, future research can be more effectively focused on detailed resource assessments and the development of targeted extraction strategies.
- 24 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessPotential Assessment of Critical Raw Materials from European Geothermal Fluids
The energy transition is accompanied by a growing demand for raw materials. The EU Critical Raw Materials Act (CRMA) foresees at least 10% of raw material supply covered by domestic sources. Geothermal fluids have the potential to contribute significantly achieving this target. Beyond the well-known and extensively studied lithium resources in European geothermal fluids, additional potential for other elements exists. We assess the potential of 64 elements in geothermal fluids that are defined as critical and strategic raw materials or raw materials in general under the CRMA, which entered into force in May 2024. This assessment is based on more than 4000 geothermal fluid analyses across Europe. In summary, 13 of the 64 assessed elements are identified to provide the largest potential based on (a) their concentrations in geothermal fluids, (b) their ability to contribute to domestic supply and reduce supply-chain risks, (c) their potential market value, and (d) their geostrategic importance. These elements are Li, B, Mg, Si, Mn, Ge, As, Rb, Sr, Cs and Pb with high reliability and Sc and Pd with low reliability. At the lower end of the spectrum are nine elements with the lowermost potentials (Se, Zr, Nb, In, Sn, Te, Ta, Re, Bi) and the Rare Earth Elements. Our evaluation framework simultaneously considers abundance and availability, economic potential and geostrategic and environmental aspects, thereby improving comparability across elements. Having identified these 13 promising candidates, future research can be more effectively focused on detailed resource assessments and the development of targeted extraction strategies.
- Open Access
- 4 November 2025
- Published by Springer Nature in Research Square
Designing chemical interactions of a geothermal battery in the Malm reservoir of Munich
The Malm reservoir in the South German Molasse Basin, characterized by its highly heterogeneous karstified carbonate structure, offers significant potential for geothermal energy production and seasonal heat storage. This study investigates the chemical interactions and risks associated with the operation of a geothermal battery, a subsurface heat storage system, in this reservoir. Using reactive transport simulations, we model the effects of injecting CO₂-inhibited thermal water at elevated temperatures (135°C) during thermal charging and cooled thermal water (60°C) during thermal discharging and compared the results to conventional geothermal operation. The study highlights the influence of heterogeneity, reactive surface area-to-volume ratios, and dolomitization on chemical interactions in the reservoir. Our results reveal that CO₂ inhibition effectively mitigates scaling risks and prevents formation damage near the storage well, while driving modest porosity increases through calcite dissolution near both storage and injection wells. Conversely, in fully dolomitic zones, minor porosity reductions are observed during thermal charging. Significant chemical changes are confined to the near-wellbore region. The chemical de-risking conducted in this study contribute to the feasibility of integrating geothermal batteries into renewable energy systems, potentially providing an economically viable solution to seasonal energy storage while supporting the decarbonization of district heating networks.
- 4 November 2025
- Published by Springer Nature in Research Square
Open AccessDesigning chemical interactions of a geothermal battery in the Malm reservoir of Munich
The Malm reservoir in the South German Molasse Basin, characterized by its highly heterogeneous karstified carbonate structure, offers significant potential for geothermal energy production and seasonal heat storage. This study investigates the chemical interactions and risks associated with the operation of a geothermal battery, a subsurface heat storage system, in this reservoir. Using reactive transport simulations, we model the effects of injecting CO₂-inhibited thermal water at elevated temperatures (135°C) during thermal charging and cooled thermal water (60°C) during thermal discharging and compared the results to conventional geothermal operation. The study highlights the influence of heterogeneity, reactive surface area-to-volume ratios, and dolomitization on chemical interactions in the reservoir. Our results reveal that CO₂ inhibition effectively mitigates scaling risks and prevents formation damage near the storage well, while driving modest porosity increases through calcite dissolution near both storage and injection wells. Conversely, in fully dolomitic zones, minor porosity reductions are observed during thermal charging. Significant chemical changes are confined to the near-wellbore region. The chemical de-risking conducted in this study contribute to the feasibility of integrating geothermal batteries into renewable energy systems, potentially providing an economically viable solution to seasonal energy storage while supporting the decarbonization of district heating networks.
- 25 December 2024
- Published by Springer Nature
- p. 381-398
Raw Material Potential of Geothermal Systems in Chile
- 25 December 2024
- Published by Springer Nature
- p. 381-398
Raw Material Potential of Geothermal Systems in Chile
- 25 December 2024
- Published by Springer Nature
- p. 359-380
Challenges and Opportunities for Lithium Extraction from Geothermal Systems in Germany: Part 2: Potential and Production Scenarios in Germany
- 25 December 2024
- Published by Springer Nature
- p. 359-380
Challenges and Opportunities for Lithium Extraction from Geothermal Systems in Germany: Part 2: Potential and Production Scenarios in Germany
- Open Access
- 29 May 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 6 (13) , 3450-3461
Titania-mediated stabilization of fluorescent dye encapsulation in mesoporous silica nanoparticles
A robust and stable encapsulation method for mesoporous silica nanoparticles, protecting the payload, preventing leakage and stabilizing the nanoparticles.
- 29 May 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 6 (13) , 3450-3461
Open AccessTitania-mediated stabilization of fluorescent dye encapsulation in mesoporous silica nanoparticles
A robust and stable encapsulation method for mesoporous silica nanoparticles, protecting the payload, preventing leakage and stabilizing the nanoparticles.
- Open Access
- 26 March 2024
- Published by Elsevier in Geoenergy Science and Engineering
- Vol. 237
Numerical modeling of temperature-reporting nanoparticle tracer for fractured geothermal reservoir characterization
- 26 March 2024
- Published by Elsevier in Geoenergy Science and Engineering
- Vol. 237
Open AccessNumerical modeling of temperature-reporting nanoparticle tracer for fractured geothermal reservoir characterization
- Open Access
- 12 October 2023
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 59 (10)
Spatial Characterization of Channeling in Sheared Rough‐Walled Fractures in the Transition to Nonlinear Fluid Flow
Accurate quantification of spatially resolved fluid flow within fractures is crucial for successful reservoir development, such as Enhanced Geothermal Systems. This study presents an innovative workflow designed to model and characterize preferential flow paths (channels) within rough‐walled shear fractures. A set of 30 rough‐walled self‐affine fractures, all possessing identical roughness characteristics, is stochastically generated. By solving the nonlinear Navier‐Stokes equations in 420 individual realizations, the transition from linear to nonlinear flow regimes and the two extreme flow directions perpendicular and parallel to the shearing are numerically captured. A distinguishing feature of this approach is its comprehensive statistical analysis, which encompasses both the geometric and transport properties of flow paths in the non‐simplified three‐dimensional fractured void space under typical geothermal flow conditions. In a perpendicular orientation of flow and shearing, fluid flow exhibits pronounced localization, with more than one‐third of the volumetric flow concentrated within 15% of the fracture volume. In contrast, parallel to the shearing, a complex pattern of individual tortuous channels emerges, with flow occurring in 22% of the void space. Nonlinear effects primarily manifest outside these channels, suggesting that complex flow phenomena may dominate irregular fracture structures, such as contact zones or asperities. In the parallel case, increased flow rates lead to an amplification of channeling processes resulting in less affected volume and diminished tortuosity of the main flow path, while in perpendicular orientation nonlinear effects are only of minor importance. The small‐scale flow regime of both extreme cases tends to converge with increasing flow rates.
- 12 October 2023
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 59 (10)
Open AccessSpatial Characterization of Channeling in Sheared Rough‐Walled Fractures in the Transition to Nonlinear Fluid Flow
Accurate quantification of spatially resolved fluid flow within fractures is crucial for successful reservoir development, such as Enhanced Geothermal Systems. This study presents an innovative workflow designed to model and characterize preferential flow paths (channels) within rough‐walled shear fractures. A set of 30 rough‐walled self‐affine fractures, all possessing identical roughness characteristics, is stochastically generated. By solving the nonlinear Navier‐Stokes equations in 420 individual realizations, the transition from linear to nonlinear flow regimes and the two extreme flow directions perpendicular and parallel to the shearing are numerically captured. A distinguishing feature of this approach is its comprehensive statistical analysis, which encompasses both the geometric and transport properties of flow paths in the non‐simplified three‐dimensional fractured void space under typical geothermal flow conditions. In a perpendicular orientation of flow and shearing, fluid flow exhibits pronounced localization, with more than one‐third of the volumetric flow concentrated within 15% of the fracture volume. In contrast, parallel to the shearing, a complex pattern of individual tortuous channels emerges, with flow occurring in 22% of the void space. Nonlinear effects primarily manifest outside these channels, suggesting that complex flow phenomena may dominate irregular fracture structures, such as contact zones or asperities. In the parallel case, increased flow rates lead to an amplification of channeling processes resulting in less affected volume and diminished tortuosity of the main flow path, while in perpendicular orientation nonlinear effects are only of minor importance. The small‐scale flow regime of both extreme cases tends to converge with increasing flow rates.
- Open Access
Challenges and Opportunities for Lithium Extraction from Geothermal Systems in Germany—Part 3: The Return of the Extraction Brine
Lithium (Li) is considered a crucial element for energy transition due to its current irreplaceability in Li-ion batteries, particularly in electric vehicles. Market analysis indicates that Germany’s future automotive sector and planned battery cell production will necessitate significant quantities of global lithium production. At the same time, only 1% of the world’s Li production is currently sourced from Europe. Recently, geothermal brines in Germany have gained attention as a potential local raw material source. These brines exhibit elevated Li concentrations and substantial flow rates in geothermal plants, suggesting the possibility of viable local production. However, a comprehensive full-scale Li extraction process from geothermal brines is yet to be established, and uncertainties persist regarding its long-term behavior. To address this, a generic model based on the geothermal settings of the Upper Rhine Graben was developed, simulating a 30-year operational period for Li extraction. The simulation revealed a 40% depletion of lithium during the observation period, while heat production remained constant. Nonetheless, the model also demonstrated a mean Li production of 231 t per year (equivalent to 1230 t per year of lithium carbonate equivalent), which could significantly enhance the economic prospects of a geothermal power plant and, if applied to multiple plants, reduce Germany’s dependence on global lithium imports. The primary factor influencing productivity is the achievable flow rate, as it directly impacts access to the raw material, hence, emphasizing the importance of detailed reservoir exploration and development in optimizing future lithium production from geothermal brines.
Open AccessChallenges and Opportunities for Lithium Extraction from Geothermal Systems in Germany—Part 3: The Return of the Extraction Brine
Lithium (Li) is considered a crucial element for energy transition due to its current irreplaceability in Li-ion batteries, particularly in electric vehicles. Market analysis indicates that Germany’s future automotive sector and planned battery cell production will necessitate significant quantities of global lithium production. At the same time, only 1% of the world’s Li production is currently sourced from Europe. Recently, geothermal brines in Germany have gained attention as a potential local raw material source. These brines exhibit elevated Li concentrations and substantial flow rates in geothermal plants, suggesting the possibility of viable local production. However, a comprehensive full-scale Li extraction process from geothermal brines is yet to be established, and uncertainties persist regarding its long-term behavior. To address this, a generic model based on the geothermal settings of the Upper Rhine Graben was developed, simulating a 30-year operational period for Li extraction. The simulation revealed a 40% depletion of lithium during the observation period, while heat production remained constant. Nonetheless, the model also demonstrated a mean Li production of 231 t per year (equivalent to 1230 t per year of lithium carbonate equivalent), which could significantly enhance the economic prospects of a geothermal power plant and, if applied to multiple plants, reduce Germany’s dependence on global lithium imports. The primary factor influencing productivity is the achievable flow rate, as it directly impacts access to the raw material, hence, emphasizing the importance of detailed reservoir exploration and development in optimizing future lithium production from geothermal brines.
- Open Access
- 23 September 2022
- Published by Springer Nature in Grundwasser
- Vol. 27 (4) , 239-259
Herausforderungen und Chancen für die Lithiumgewinnung aus geothermalen Systemen in Deutschland – Teil 1: Literaturvergleich bestehender Extraktionstechnologien
Zusammenfassung: Die hier vorgestellte Arbeit schätzt den Stand der Extraktionstechnologien zur Lithiumgewinnung aus geothermalen Wässern basierend auf aktuellen wissenschaftlichen Studien ab und identifiziert mögliche technische Herausforderungen. Bewertet werden häufig diskutierte Technologien wie Flüssig-Flüssig-Extraktion, selektive Extraktion durch anorganische Sorptionsmittel, elektrochemische Methoden und Membrantechnologien hinsichtlich ihrer Anwendbarkeit und Integrierbarkeit in die geothermische Energieproduktion. Aktuelle Forschungsprojekte haben verschiedene Extraktionsmethoden im Labor- und teilweise Prototypenmaßstab validiert. Eine Skalierung zu einem industriellen Prozess existiert bisher nicht. Dementsprechend fehlen Informationen bezüglich Dauerbetriebs sowie Einfluss standortspezifischer Hürden (Wasserchemie, Volumenstrom, Fließraten etc.) und zur tatsächlichen Wirtschaftlichkeit. Die Menge des rückgewinnbaren Lithiums ergibt sich in erster Linie aus der Konzentration des im Wasser gelösten Lithiums, der Extraktionseffizienz und -geschwindigkeit, sowie der Menge des verwendeten Extraktionsmittels. Das Zusammenspiel dieser Faktoren bestimmt die Verfahrenstechnik und die Größe der Extraktionsinfrastruktur. Je nach Verfahren werden die physikochemischen Eigenschaften des Wassers (pH, Eh, T, p etc.) während der Extraktion verändert, wodurch das Scaling- und Korrosionspotenzial gesteigert werden kann.Der aktuelle Stand der Technik zeigt ein frühes bis mittleres Technologiereifestadium bei Lithium-Extraktionseffizienzen in Laborexperimenten von 50–90 %. Unter den ungleich höheren Herausforderungen im laufenden Betrieb eines Geothermiekraftwerks, werden Extraktionseffizienzen im unteren Bereich dieser Bandbreite als realistisch angesehen.
- 23 September 2022
- Published by Springer Nature in Grundwasser
- Vol. 27 (4) , 239-259
Open AccessHerausforderungen und Chancen für die Lithiumgewinnung aus geothermalen Systemen in Deutschland – Teil 1: Literaturvergleich bestehender Extraktionstechnologien
Zusammenfassung: Die hier vorgestellte Arbeit schätzt den Stand der Extraktionstechnologien zur Lithiumgewinnung aus geothermalen Wässern basierend auf aktuellen wissenschaftlichen Studien ab und identifiziert mögliche technische Herausforderungen. Bewertet werden häufig diskutierte Technologien wie Flüssig-Flüssig-Extraktion, selektive Extraktion durch anorganische Sorptionsmittel, elektrochemische Methoden und Membrantechnologien hinsichtlich ihrer Anwendbarkeit und Integrierbarkeit in die geothermische Energieproduktion. Aktuelle Forschungsprojekte haben verschiedene Extraktionsmethoden im Labor- und teilweise Prototypenmaßstab validiert. Eine Skalierung zu einem industriellen Prozess existiert bisher nicht. Dementsprechend fehlen Informationen bezüglich Dauerbetriebs sowie Einfluss standortspezifischer Hürden (Wasserchemie, Volumenstrom, Fließraten etc.) und zur tatsächlichen Wirtschaftlichkeit. Die Menge des rückgewinnbaren Lithiums ergibt sich in erster Linie aus der Konzentration des im Wasser gelösten Lithiums, der Extraktionseffizienz und -geschwindigkeit, sowie der Menge des verwendeten Extraktionsmittels. Das Zusammenspiel dieser Faktoren bestimmt die Verfahrenstechnik und die Größe der Extraktionsinfrastruktur. Je nach Verfahren werden die physikochemischen Eigenschaften des Wassers (pH, Eh, T, p etc.) während der Extraktion verändert, wodurch das Scaling- und Korrosionspotenzial gesteigert werden kann.Der aktuelle Stand der Technik zeigt ein frühes bis mittleres Technologiereifestadium bei Lithium-Extraktionseffizienzen in Laborexperimenten von 50–90 %. Unter den ungleich höheren Herausforderungen im laufenden Betrieb eines Geothermiekraftwerks, werden Extraktionseffizienzen im unteren Bereich dieser Bandbreite als realistisch angesehen.