Soňa Hurná
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Soňa Hurná has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Katarína Teplická
Technical University of Košice
5 shared publications - Daniela Spirkova
Slovak University of Technology in Bratislava
1 shared publication - Daniela Špirková
Department of Business Economics, Faculty of Business and Economics, Mendel University in Brno, Zemědělská 1, 613 00 Brno, Czech Republic
1 shared publication - Jaroslava Kádárová
Department of Business Management and Economics, Faculty of Mechanical Engineering, Technical University of Kosice, 042 00 Košice, Slovakia
1 shared publication M. Bozogan
Mendel Univ Brno, Zemedelska 1, Brno 61300, Czech Republic
1 shared publication- Martin Straka
Institute of Logistics and Transport, Technical University of Kosice, 042 00 Kosice, Slovakia
1 shared publication
Latest Publications
- Open Access
- 1 August 2023
- Published by Walter de Gruyter GmbH in Management Systems in Production Engineering
- Vol. 31 (3) , 248-253
Comparison of Environmental Costs in Divisions with Different Geographical Action and their Significance in Environmental Management
The relevance of the decision of this scientific research is related to the requirements of Industry 4.0. orientated to environmental sustainability. This article summarizes the scientific discussion on the issue of the comparison of environmental costs in various divisions such as Slovakia, Italy, Brazil, Mexico, China. The main goal of this article is to compare costs in divisions of the parent company with different geographical working. The object of the research was the parent company EMBRACO. Methods of research were focused on using economic analysis with indicators of the cost function, chain index, and cost structure. The results of the research show environmental costs of the divisions are at the level of €1.9-€3.1 million. The total state of the environmental costs by individual country represents the lowest value in Italy and Slovakia. The lowest environmental costs are for the category of air costs for all divisions and the second category of costs with low values are other environmental costs, while Brazil and Mexico do not record this category of costs in the accounting. The key category for minimizing environmental costs is water costs for Slovakia and China and other waste costs for Italy, Brazil, and Mexico. The hazardous waste category represents (0.9-32%). Based on these results, the parent company can decide on the possibilities of positioning its divisions in terms of strategic business.
- 1 August 2023
- Published by Walter de Gruyter GmbH in Management Systems in Production Engineering
- Vol. 31 (3) , 248-253
Open AccessComparison of Environmental Costs in Divisions with Different Geographical Action and their Significance in Environmental Management
The relevance of the decision of this scientific research is related to the requirements of Industry 4.0. orientated to environmental sustainability. This article summarizes the scientific discussion on the issue of the comparison of environmental costs in various divisions such as Slovakia, Italy, Brazil, Mexico, China. The main goal of this article is to compare costs in divisions of the parent company with different geographical working. The object of the research was the parent company EMBRACO. Methods of research were focused on using economic analysis with indicators of the cost function, chain index, and cost structure. The results of the research show environmental costs of the divisions are at the level of €1.9-€3.1 million. The total state of the environmental costs by individual country represents the lowest value in Italy and Slovakia. The lowest environmental costs are for the category of air costs for all divisions and the second category of costs with low values are other environmental costs, while Brazil and Mexico do not record this category of costs in the accounting. The key category for minimizing environmental costs is water costs for Slovakia and China and other waste costs for Italy, Brazil, and Mexico. The hazardous waste category represents (0.9-32%). Based on these results, the parent company can decide on the possibilities of positioning its divisions in terms of strategic business.
- 31 March 2023
- Published by 4S go, s.r.o. in Acta logistica
- Vol. 10 (1) , 95-103
Optimizing internal transport in terms of technical parameters in a mining company
- 31 March 2023
- Published by 4S go, s.r.o. in Acta logistica
- Vol. 10 (1) , 95-103
Optimizing internal transport in terms of technical parameters in a mining company
- Open Access
- 13 July 2022
- Published by Walter de Gruyter GmbH in Management Systems in Production Engineering
- Vol. 30 (3) , 207-213
The New Model of the Engineering Education Using Digitalization and Innovative Methods
The sustainability of engineering education depends on a strategic vision in university education. The strategic vision of education at technical universities is orientated to knowledge, digitization, online education, innovative methods in education, all forms of Management and business education platform. The main goal of this article is the creation of the model of engineering education at the technical university based on synergy effect of the economic subjects of study, digitalization, all forms of management, and innovative didactic methods with direction to future education. In this research we realized project “Student firms” by using digitalization, e-learning approach in education and connecting all form of management as in business environment. Results of the implemented “Student Firms” project at the university recorded benefits in improving students’ key competencies, soft skills, social competencies, financial, economic competencies, and their impact on the level of evaluation of subjects of study. The output of the research was the design of a model of engineering education at the university. This model can be a tool for making changes in education at university for his sustainability in the future.
- 13 July 2022
- Published by Walter de Gruyter GmbH in Management Systems in Production Engineering
- Vol. 30 (3) , 207-213
Open AccessThe New Model of the Engineering Education Using Digitalization and Innovative Methods
The sustainability of engineering education depends on a strategic vision in university education. The strategic vision of education at technical universities is orientated to knowledge, digitization, online education, innovative methods in education, all forms of Management and business education platform. The main goal of this article is the creation of the model of engineering education at the technical university based on synergy effect of the economic subjects of study, digitalization, all forms of management, and innovative didactic methods with direction to future education. In this research we realized project “Student firms” by using digitalization, e-learning approach in education and connecting all form of management as in business environment. Results of the implemented “Student Firms” project at the university recorded benefits in improving students’ key competencies, soft skills, social competencies, financial, economic competencies, and their impact on the level of evaluation of subjects of study. The output of the research was the design of a model of engineering education at the university. This model can be a tool for making changes in education at university for his sustainability in the future.
- Open Access
- 6 January 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (2) , 451
Evaluation of Energy Savings and Economic Benefits of SOLTAG Rooftop Extensions under the Conditions of a Model Area in the Slovak Republic
Modular building systems in the Slovak Republic are assessed as a practical construction method and solution for a particular type of housing stock, as well as an alternative. Most existing panel buildings designed in the Slovak Republic had sufficient static reserve, allowing for the construction of rooftop extensions. Despite the considerable advantages of modular rooftop extensions, the aforementioned method of increasing available and sustainable housing stock—especially in large cities—is under-utilized in Slovakia. This paper outlines a solution for low-energy extensions—the SOLTAG concept—on the basis of knowledge acquired by studying problems related to Soltag extensions as part of the SURE-Fit (Sustainable Roof Extension Retrofit) project and practical experience from Denmark. This paper aims to assess and compare energy savings and economic benefits for three rooftop extensions of the SOLTAG concept and bricked extensions for a model area in the Slovak Republic.
- 6 January 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (2) , 451
Open AccessEvaluation of Energy Savings and Economic Benefits of SOLTAG Rooftop Extensions under the Conditions of a Model Area in the Slovak Republic
Modular building systems in the Slovak Republic are assessed as a practical construction method and solution for a particular type of housing stock, as well as an alternative. Most existing panel buildings designed in the Slovak Republic had sufficient static reserve, allowing for the construction of rooftop extensions. Despite the considerable advantages of modular rooftop extensions, the aforementioned method of increasing available and sustainable housing stock—especially in large cities—is under-utilized in Slovakia. This paper outlines a solution for low-energy extensions—the SOLTAG concept—on the basis of knowledge acquired by studying problems related to Soltag extensions as part of the SURE-Fit (Sustainable Roof Extension Retrofit) project and practical experience from Denmark. This paper aims to assess and compare energy savings and economic benefits for three rooftop extensions of the SOLTAG concept and bricked extensions for a model area in the Slovak Republic.
- Open Access
- 2 December 2020
- Published by Walter de Gruyter GmbH in Management Systems in Production Engineering
- Vol. 29 (1) , 20-26
New Approach of Costs of Quality According their Trend of During Long Period in Industrial Enterprises in SMEs
Very important in SMEs is to monitor cost of quality and economic indicators for valuation of cost effectiveness. The main goal of this article is to create classification on cost quality categories in SMEs and to analyze economic quality indicators and their trend during long period. In this article authors use economical and statistical indicators for costs of quality. We use common model PAF, that include prevention costs, evaluation costs, internal failure costs, external failure costs. Total costs, individual simple cost index, cost ratio and cost structure were used. We analyzed data from 50 small enterprises with 10-40 employees with their yearly turnover max 3 mil €. The research sample of enterprises was focused on industrial areas of business such as engineering, metallurgy, automotive industry. We analyzed the quality costs in SMEs by the average value of quality cost in all surveyed enterprises. Results of this research brought labeling of cost of quality in SMEs by model the PAF for 10 categories for various enterprises, what is very important for comparing of results of QMS in SMEs. Based on the reference indicators of the total costs of quality in SMEs we can conclude their drop. Reducing the costs of quality was reflected in particular in reducing the costs of internal and external errors. In assessing the economic efficiency in SMEs plays an important role the overall cost that were increasing in reporting period. Very important result is that the cost of quality did not influenced overall cost. This fact is positive for competitiveness in SMEs because it shows a quality of production and product. Reducing of cost of quality brought improving of product quality; reduced customer’s complaints brought financial savings. The economic efficiency indicator shows a value above e > 1. It means that, despite rising cost enterprises generate revenues that are significantly higher than the input factors of production. Cost effectiveness helps to improve TQM performance.
- 2 December 2020
- Published by Walter de Gruyter GmbH in Management Systems in Production Engineering
- Vol. 29 (1) , 20-26
Open AccessNew Approach of Costs of Quality According their Trend of During Long Period in Industrial Enterprises in SMEs
Very important in SMEs is to monitor cost of quality and economic indicators for valuation of cost effectiveness. The main goal of this article is to create classification on cost quality categories in SMEs and to analyze economic quality indicators and their trend during long period. In this article authors use economical and statistical indicators for costs of quality. We use common model PAF, that include prevention costs, evaluation costs, internal failure costs, external failure costs. Total costs, individual simple cost index, cost ratio and cost structure were used. We analyzed data from 50 small enterprises with 10-40 employees with their yearly turnover max 3 mil €. The research sample of enterprises was focused on industrial areas of business such as engineering, metallurgy, automotive industry. We analyzed the quality costs in SMEs by the average value of quality cost in all surveyed enterprises. Results of this research brought labeling of cost of quality in SMEs by model the PAF for 10 categories for various enterprises, what is very important for comparing of results of QMS in SMEs. Based on the reference indicators of the total costs of quality in SMEs we can conclude their drop. Reducing the costs of quality was reflected in particular in reducing the costs of internal and external errors. In assessing the economic efficiency in SMEs plays an important role the overall cost that were increasing in reporting period. Very important result is that the cost of quality did not influenced overall cost. This fact is positive for competitiveness in SMEs because it shows a quality of production and product. Reducing of cost of quality brought improving of product quality; reduced customer’s complaints brought financial savings. The economic efficiency indicator shows a value above e > 1. It means that, despite rising cost enterprises generate revenues that are significantly higher than the input factors of production. Cost effectiveness helps to improve TQM performance.
- 4 February 2020
- Published by Springer Nature in EAI/Springer Innovations in Communication and Computing
- p. 73-111
Use of Modern Technologies at Baggage Tracking and Its Impact on Airline Revenue
- 4 February 2020
- Published by Springer Nature in EAI/Springer Innovations in Communication and Computing
- p. 73-111
Use of Modern Technologies at Baggage Tracking and Its Impact on Airline Revenue
- 15 September 2019
- Published by DAAAM International in International Journal of Simulation Modelling
- Vol. 18 (3) , 408-419
Using Continuous Simulation for Identifying Bottlenecks in Specific Operation
- 15 September 2019
- Published by DAAAM International in International Journal of Simulation Modelling
- Vol. 18 (3) , 408-419
Using Continuous Simulation for Identifying Bottlenecks in Specific Operation
- Open Access
- 10 January 2017
- Published by DEStech Publications in DEStech Transactions on Environment, Energy and Earth Sciences
- No. peem
Selected Aspects of the Windmill Construction Impact on Air Traffic Safety
This article focuses on the problems of windmill construction impact on air traffic safety. We present the methodology for assessment of the windmill construction impact on the aviation electronic system operation and safety of IFR and VFR flights.
- 10 January 2017
- Published by DEStech Publications in DEStech Transactions on Environment, Energy and Earth Sciences
- No. peem
Open AccessSelected Aspects of the Windmill Construction Impact on Air Traffic Safety
This article focuses on the problems of windmill construction impact on air traffic safety. We present the methodology for assessment of the windmill construction impact on the aviation electronic system operation and safety of IFR and VFR flights.