Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Behdad Shadidi has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    SulfoChar as a Novel Nano-Biochar Additive for B20 Biodiesel Blends: Enhancing Combustion and Reducing Exhaust Emissions

    by Mahtab Yarveysi, Behdad Shadidi, Maryam Hajjami, Zahra Siahpour

    While biodiesel blends offer renewable alternatives to conventional diesel, mitigating their nitrogen oxide (NOx) penalties and optimizing combustion typically requires synthetic or metallic additives. This study introduces SulfoChar, a sulfonated walnut-shell nanobiochar functionalized with sulfonic acid (–SO3H) groups, as a novel, surfactant-free fuel-borne additive for B20 (20% biodiesel/80% diesel) blends. Synthesized via pyrolysis and subsequent functionalization, the nanobiochar was characterized using FTIR, SEM, and EDS, exhibiting excellent colloidal dispersion in the fuel matrix for over 30 days without chemical stabilizers. Engine evaluations were conducted at additive concentrations of 30, 60, and 90 mg/L under full-load conditions across 2900–3300 rpm. Experimental data revealed a distinct decoupling of optimal emission and performance dosages. The maximum concentration (90 mg/L) provided the highest environmental benefits, yielding peak reductions of 48.4% in carbon monoxide (CO) and 17.4% in NOx relative to the baseline B20. Conversely, mechanical output peaked at the lowest dosage (30 mg/L), which increased brake power by up to 19.3% at 2900 rpm. Surface map analysis indicated a balanced operational regime at 40–50 mg/L and 3000–3100 rpm. The simultaneous improvements in physical stability and engine characteristics suggest that -SO3H functionalization potentially facilitates better fuel micro-dispersion and favorable surface-level interactions during combustion. Ultimately, under the tested conditions, SulfoChar demonstrates promising potential as a sustainable, metal-free additive to concurrently mitigate exhaust emissions and enhance engine performance.

  • Open Access

    Performance and Emissions Optimization of a Diesel Engine Using Biodiesel–Diesel Blends with Amine-Modified Nanobiochar

    by Mahtab Yarveysi, Behdad Shadidi, Maryam Hajjami, Seyed Mohammad Safieddin Ardebili, Hossein Haji Agha Alizade

    Utilizing bio-based nano-fuel additives presents a promising path towards improved engine performance and reduced emissions. The response surface method is used in this investigation to predict and optimize the performance parameters and exhaust emissions of a single-cylinder diesel engine. The engine operates with B20 at 2900, 3100, and 3300 rpm and nanobiochar concentrations of 30, 60, and 90 ppm. The results showed a declining trend in all of the engine-out emissions when the nanobiochar additive was used. Based on the optimization results, an engine speed of 3108 rpm and a nanobiochar ratio of 90 ppm were found to be the optimal conditions within the defined range of the input parameters. At this point, the engine power, torque, BSFC, and emissions of NOx, CO, and UHC were measured at 5.78 kW, 17.96 Nm, and 309 g/kW·h, 104.9 ppm, 1.25 (%Vol.), and 104.9 ppm, respectively. These values represent significant improvements compared to the baseline B20 fuel. The modeling results showed that RSM could effectively predict engine performance and emissions when running on a green-based fuel like B20, with a 90 ppm nanobiochar additive.


  • Multi-objective optimization of the performance and emissions characteristics of a CI engine powered by Pyrus glabra biodiesel as a novel feedstock using response surface method

    by Gholamhassan Najafi, Behdad Shadidi, Rizalman Mamat, Seyed Mohammad Safieddin Ardebili, Saeid Hazrati, Mohammad-Taghi Ebadi, Mohd Fairusham Ghazali

    There has been ongoing research to develop a clean and environmentally benign alternative to fossil fuels because renewable energy sources (RESs) emit reduced amounts of greenhouse gases and other ...


  • Open Access

    A Review of the Existing Potentials in Biodiesel Production in Iran

    by Behdad Shadidi, Gholamhassan Najafi, Mohammad Ali Zolfigol

    Petroleum fuel plays an important role in industry, transportation, agriculture and other related industries in Iran. Iran has about 9.5% of the world’s total oil reserves in 2020 and is ranked 4th in the world. The presence of sufficient conventional fossil fuels for internal combustion engines has caused environmental problems. If these Iranian fossil fuels were to run out right now, there is no suitable alternative that is just as effective. The need to research alternative fuels in Iran is therefore unavoidable. In this study, the potential and available resources of raw materials, including rapeseed oil, palm oil, fish oil, waste oil, algae, animal fat, olive oil and jatropha oil for biodiesel production in different regions of Iran, have been reviewed. Given the potentials and resources described in this study, it is hoped that the findings of this study will play an important role in biodiesel production in Iran in the future and stimulate more researchers to create biodiesel from existing sources. It is also expected that this study will increase the attention of the governmental and non-governmental organizations in Iran to the existing resources for biodiesel production and development of these resources and get rid of the existing problems of fossil fuels by investing in this field.


  • Effect of Covid-19 on NO2 and particular matter (PM) concentrations and reaffirmation of the need to use biofuels in the world

    by Behdad Shadidi, Gholamhassan Najafi, Hossein Haji Agha Alizade, Shiva Gorjian

    On 23 January 2020, the world saw the first coronavirus lockdown come into force in Wuhan, China in an effort to stop the spread of the illness. This lockdown set the precedent for similar measures in other cities across the country, putting a halt to daily activities including industry and traffic. Factories and other industries were shut down and people were confined to their homes. Similar measures were then put in place worldwide in the following weeks and months. As a result, a significant reduction in air pollutants across the world was detected by satellites. This included reduced emissions of particular matter (PM) and nitrogen dioxide. The aim of this work is to investigate the effects of COVID-19 pandemics on NO2 and particular matter (PM) concentrations during lockdown, to answer the question of whether this crisis should reduce the development of biofuels or with regard to the reduction and end of COVID-19 restrictions we need to pay more attention to the effects and importance of biofuels on human health. The lockdown reduced the amount of PM in different countries of the world by 9 to 63% compared to the time of corona lock. Its distribution also decreased by 20–30% in European countries and up to 70% in some Asian countries. But wait, you should not be happy. Because these changes have taken place at a time when the world is facing a crisis and governments are forced to shut down businesses and impose locks. The use of biofuels can also reduce the emission of these air pollutants. Corona conditions once again reminded of the need to use these fuels. The condition of the corona is also temporary, and with the discovery of the corona vaccine and the start of vaccination around the world, these locks will be reduced and air pollutants will return to the time of the previous corona. Therefore, the need to use renewable and sustainable energy such as biofuels becomes apparent.

  • Top Cited Papers
    Open Access

    A Review of Hydrogen as a Fuel in Internal Combustion Engines

    by Behdad Shadidi, Gholamhassan Najafi, Talal Yusaf

    The demand for fossil fuels is increasing because of globalization and rising energy demands. As a result, many nations are exploring alternative energy sources, and hydrogen is an efficient and practical alternative fuel. In the transportation industry, the development of hydrogen-powered cars aims to maximize fuel efficiency and significantly reduce exhaust gas emission and concentration. The impact of using hydrogen as a supplementary fuel for spark ignition (SI) and compression ignition (CI) engines on engine performance and gas emissions was investigated in this study. By adding hydrogen as a fuel in internal combustion engines, the torque, power, and brake thermal efficiency of the engines decrease, while their brake-specific fuel consumption increase. This study suggests that using hydrogen will reduce the emissions of CO, UHC, CO2, and soot; however, NOx emission is expected to increase. Due to the reduction of environmental pollutants for most engines and the related environmental benefits, hydrogen fuel is a clean and sustainable energy source, and its use should be expanded.


  • Open Access

    The Influence of Diesel–Ethanol Fuel Blends on Performance Parameters and Exhaust Emissions: Experimental Investigation and Multi-Objective Optimization of a Diesel Engine

    by Behdad Shadidi, Hossein Haji Agha Alizade, Gholamhassan Najafi

    Compression combustion engines are a source of air pollutants such as HC and Co, but are still widely used throughout the world. The use of renewable fuels such as ethanol, which is a low-carbon fuel, can reduce the emission of these harmful gases from the engine. A fundamental analysis is proposed in this research to experimentally examine the emission characteristics of diesel–ethanol fuel blends. Furthermore, a multi-objective genetic algorithm (e-MOGA) was developed based on the experimental data obtained to fine the most effective or Pareto set of engine emission and performance optimization solutions. So, the optimization problem had two inputs and seven objectives. For this purpose, input variables for the search space were S (rpm) varied in the range of (1600–2000) and E (%) varied in the range of (0–12). These design variables were chosen to be varied in a prespecified range with a lower and upper band as same as experimental conditions. A diesel engine using (DE2, DE4, DE6, DE8, DE10, and DE12) diesel–ethanol fuel blends, at the various speed of 1600 to 2000 rpm, was utilized for the experiment. The findings showed that the use of diesel–ethanol fuel blends decreased the concentration of CO and HC emissions by 3.2–30.6% and 7.01–16.25%, respectively, due to the high oxygen content of ethanol. As opposed to CO and HC emissions, the NOx concentration showed an increase of 7.5–19.6%. This increase was attributed to the high combustion quality in the combustion chamber, which resulted in a higher combustion chamber temperature. The optimization results confirmed that the shape of the Pareto front obtained from multi-objective ϵ-Pareto optimization could be convex, concave, or a combination of both. A new parameter was introduced as emission index or EI for selection of the best solution among the Pareto set of solutions. This parameter had a minimum value of 4.61. The variables levels for this optimum solution were as follows: engine speed = 1977 rpm, ethanol blend ratio = 10%, CO = 0.27%, CO2 = 6.81%, HC = 3 ppm, NOx = 1573 ppm, SFC = 239 g/kW·h, P = 56 kW, and T = 269.9 N·m. The EI index had a maximum value of 8.26. Conclusively, we can say that the optimization algorithm was successful in minimizing emission index for all ethanol blend ratios, especially at higher engine speeds.


  • Experimental investigation of the tractor engine performance using diesohol fuel

    by Behdad Shadidi, Talal Yusaf, Hossein Haji Agha Alizadeh, Barat Ghobadian