Danijela Petrović
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Danijela Petrović has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Srđan Bilić
Faculty of Forestry, University of Banja Luka, Banja Luka, Bosnia and Herzegovina
3 shared publications - Vojislav Dukić
Faculty of Forestry, University of Banja Luka, Bulevar Vojvode Petra Bojovića 1A, 78000 Banja Luka, Bosnia and Herzegovina
3 shared publications - Dane Marčeta
University of Banja Luka, Faculty of Forestry, B&H
2 shared publications Vladimir Petković
2 shared publicationsVojislav Dukić
2 shared publicationsGoran Jović
PFE Forests of the Republic of Srpska, Sokolac, Bosnia and Herzegovina
1 shared publication
Latest Publications
- Open Access
- 30 April 2026
- Published by University of Banja Luka in Natura Dinarica
- Vol. 1 (1)
Sortimentne tablice hrasta kitnjaka u Republici Srpskoj
Hrast kitnjak (Quercus petraea L.) predstavlja jednu od najznačajnijih šumskih vrsta u Republici Srpskoj, a tačna procjena njegove sortimentne strukture je od ključnog značaja za planiranje gazdovanja i optimizacijušumskoproizvodnih procesa. Cilj ovog istraživanja bio je izrada sortimentnih tablica za hrast kitnjak zasnovanih na reprezentativnim terenskim podacima prikupljenim u četiri šumskoprivredna područja, koja obuhvataju različite tipove staništa i gazdinske klase. Analizirano je ukupno 2437 stabala, za koja su utvrđeni prsni prečnik, visina i kvalitativna struktura debla, uz primjenu standardizovane metodologije. Sortimentna struktura određena je kombinacijom teorijskog krojenja i varijanti koje obezbjeđuju maksimalan finansijski efekat u datim uslovima, pri čemu su izvršene regresiona i korelaciona analiza zavisnosti zapremine i vrijednosti sortimenata od prečnika stabla. Rezultati pokazuju da sa povećanjem prečnika na prsnoj visini raste učešće tehničkih sortimenata, naročito trupaca I i II klase, dok u manjim debljinskim stepenima dominira ogrevno drvo. Izrađene tablice omogućavaju precizniju procjenu zapremine i kvaliteta drvne mase hrasta kitnjaka u različitim uslovima staništa i predstavljaju pouzdanu osnovu za unapređenje planiranja sječa, procjene ekonomske vrijednosti stabala i optimizaciju šumskoproizvodnih procesa u Republici Srpskoj.
- 30 April 2026
- Published by University of Banja Luka in Natura Dinarica
- Vol. 1 (1)
Open AccessSortimentne tablice hrasta kitnjaka u Republici Srpskoj
Hrast kitnjak (Quercus petraea L.) predstavlja jednu od najznačajnijih šumskih vrsta u Republici Srpskoj, a tačna procjena njegove sortimentne strukture je od ključnog značaja za planiranje gazdovanja i optimizacijušumskoproizvodnih procesa. Cilj ovog istraživanja bio je izrada sortimentnih tablica za hrast kitnjak zasnovanih na reprezentativnim terenskim podacima prikupljenim u četiri šumskoprivredna područja, koja obuhvataju različite tipove staništa i gazdinske klase. Analizirano je ukupno 2437 stabala, za koja su utvrđeni prsni prečnik, visina i kvalitativna struktura debla, uz primjenu standardizovane metodologije. Sortimentna struktura određena je kombinacijom teorijskog krojenja i varijanti koje obezbjeđuju maksimalan finansijski efekat u datim uslovima, pri čemu su izvršene regresiona i korelaciona analiza zavisnosti zapremine i vrijednosti sortimenata od prečnika stabla. Rezultati pokazuju da sa povećanjem prečnika na prsnoj visini raste učešće tehničkih sortimenata, naročito trupaca I i II klase, dok u manjim debljinskim stepenima dominira ogrevno drvo. Izrađene tablice omogućavaju precizniju procjenu zapremine i kvaliteta drvne mase hrasta kitnjaka u različitim uslovima staništa i predstavljaju pouzdanu osnovu za unapređenje planiranja sječa, procjene ekonomske vrijednosti stabala i optimizaciju šumskoproizvodnih procesa u Republici Srpskoj.
- Open Access
- 26 December 2025
- Published by University of Banja Luka in Glasnik Šumarskog fakulteta Univerziteta u Banjoj Luci
- No. 35,p. 125-135
Wood density variation in Serbian Spruce: A comparative study of natural stands and plantations
Serbian spruce (Picea omorika Pančić/Purkyně) is a Tertiary relict and an endemic species of the Balkan Peninsula, whose limited distribution range and pronounced ecological specificity make the study of its physical properties particularly important. The objective of this research was to determine the differences in wood density between Serbian spruce originating from plantations and from natural stands, as well as to analyze the variation of density in both axial and radial directions. The research was carried out at five locations in Bosnia and Herzegovina (Dubrava, Srebrenica, Gostilja, Stolac 1, and Stolac 2), using a total of 3,117 specimens. Wood density was determined in the oven-dry, air-dry, and green states, as well as by its nominal value. The average oven-dry wood density was 0.421 g/cm³ in plantations and 0.487 g/cm³ in natural stands. An increase in density with tree height was observed in natural stands, which contrasts with the typical trend in spruce and suggests an adaptive mechanism of the trees to static and dynamic loads. Radially, the density increased from pith to bark, consistent with the higher proportion of latewood. Significant correlations were established between wood density, ring width, and the proportion of latewood. The obtained results indicate that Serbian spruce can represent a sustainable alternative to Norway spruce in technical and industrial applications.
- 26 December 2025
- Published by University of Banja Luka in Glasnik Šumarskog fakulteta Univerziteta u Banjoj Luci
- No. 35,p. 125-135
Open AccessWood density variation in Serbian Spruce: A comparative study of natural stands and plantations
Serbian spruce (Picea omorika Pančić/Purkyně) is a Tertiary relict and an endemic species of the Balkan Peninsula, whose limited distribution range and pronounced ecological specificity make the study of its physical properties particularly important. The objective of this research was to determine the differences in wood density between Serbian spruce originating from plantations and from natural stands, as well as to analyze the variation of density in both axial and radial directions. The research was carried out at five locations in Bosnia and Herzegovina (Dubrava, Srebrenica, Gostilja, Stolac 1, and Stolac 2), using a total of 3,117 specimens. Wood density was determined in the oven-dry, air-dry, and green states, as well as by its nominal value. The average oven-dry wood density was 0.421 g/cm³ in plantations and 0.487 g/cm³ in natural stands. An increase in density with tree height was observed in natural stands, which contrasts with the typical trend in spruce and suggests an adaptive mechanism of the trees to static and dynamic loads. Radially, the density increased from pith to bark, consistent with the higher proportion of latewood. Significant correlations were established between wood density, ring width, and the proportion of latewood. The obtained results indicate that Serbian spruce can represent a sustainable alternative to Norway spruce in technical and industrial applications.
- Open Access
- 27 October 2024
- Published by National and University Library of the Republic of Srpska in Contemporary Materials
- Vol. 15 (2)
SHOCK RESISTANCE OF SERBIAN SPRUCE WOOD FROM NATURAL AND PLANTED FORESTS
Among other things, the origin of the stand has a great influence on the quality of wood as a material. One of the important indicators of wood quality is the impact strength, because a large number of wood products crack under the influence of dynamic and not under the influence of static load. The aim of this work is to show the values of the impact bending strength (shock resistance) of Serbian spruce wood originating from natural stands and wood originating from planted forests, i.e. plantations. Correlations between impact bending strength and ring width, late wood content and wood density were determined by regression analysis.
- 27 October 2024
- Published by National and University Library of the Republic of Srpska in Contemporary Materials
- Vol. 15 (2)
Open AccessSHOCK RESISTANCE OF SERBIAN SPRUCE WOOD FROM NATURAL AND PLANTED FORESTS
Among other things, the origin of the stand has a great influence on the quality of wood as a material. One of the important indicators of wood quality is the impact strength, because a large number of wood products crack under the influence of dynamic and not under the influence of static load. The aim of this work is to show the values of the impact bending strength (shock resistance) of Serbian spruce wood originating from natural stands and wood originating from planted forests, i.e. plantations. Correlations between impact bending strength and ring width, late wood content and wood density were determined by regression analysis.
- Open Access
- 31 October 2023
- Published by Hrvatsko Sumarsko Drustvo in Šumarski list
- Vol. 147 (9-10) , 445-455
Applicability of different regression models for estimation of merchantable wood volume of sessile oak (Quercus petraea (Matt.) Liebl.) in Bosnia and Herzegovina
In Bosnia and Herzegovina, there are tariff tables used for estimating the volume of sessile oak trees in high forests, which were created on the basis of two-entry volume tables for oak trees from the area of Germany, authored by Schwappach in 1905. There are indications that the application of the aforementioned tariffs in forest management practice results in certain differences in the estimated amount of merchantable wood volume compared to the real situation. The material for creation of volume tables was the data concerning the measurement of 2,413 model trees in different habitat and stand conditions. A large number of widely used regression models was tested to equalize the volume of merchantable wood volume as a dependent variable in terms of the diameter at breast height and height of the tree as independent variables. Regression models such as Schumacher-Hall and Spurr II provide satisfactory accuracy, that is, they can be used to estimate the merchantable wood volume of sessile oak trees in high forests (pure and mixed) in the territory of Bosnia and Herzegovina, with a permissible deviation. By introducing the third variable into the model, diameter at seven meters height, the accuracy of the tree volume estimation increases significantly, but due to the significant increase in the volume of work on collecting the necessary data, this model is not suitable for use in forest inventories.
- 31 October 2023
- Published by Hrvatsko Sumarsko Drustvo in Šumarski list
- Vol. 147 (9-10) , 445-455
Open AccessApplicability of different regression models for estimation of merchantable wood volume of sessile oak (Quercus petraea (Matt.) Liebl.) in Bosnia and Herzegovina
In Bosnia and Herzegovina, there are tariff tables used for estimating the volume of sessile oak trees in high forests, which were created on the basis of two-entry volume tables for oak trees from the area of Germany, authored by Schwappach in 1905. There are indications that the application of the aforementioned tariffs in forest management practice results in certain differences in the estimated amount of merchantable wood volume compared to the real situation. The material for creation of volume tables was the data concerning the measurement of 2,413 model trees in different habitat and stand conditions. A large number of widely used regression models was tested to equalize the volume of merchantable wood volume as a dependent variable in terms of the diameter at breast height and height of the tree as independent variables. Regression models such as Schumacher-Hall and Spurr II provide satisfactory accuracy, that is, they can be used to estimate the merchantable wood volume of sessile oak trees in high forests (pure and mixed) in the territory of Bosnia and Herzegovina, with a permissible deviation. By introducing the third variable into the model, diameter at seven meters height, the accuracy of the tree volume estimation increases significantly, but due to the significant increase in the volume of work on collecting the necessary data, this model is not suitable for use in forest inventories.
- Open Access
- 31 August 2021
- Published by MDPI AG in Environmental Sciences Proceedings
- Vol. 13 (1) , 20
Spatial Structure of Uneven-Aged Stands of Fir and Beech on the Borja Mountain (Bosnia and Herzegovina)
In the territory of Bosnia and Herzegovina, uneven-aged stands of fir and beech are very important from the economic and ecological points of view. A major lack of information on the simple structure of stands is that it cannot be used to draw valid conclusions about the spatial distribution of woody species and about the position and dimensions of trees, and this is one of the bases for the sustainable management of mixed and uneven-aged forests. In four mixed uneven-aged fir and beech stands and one pure fir stand on Mt Borja, the basic elements of tree growth were measured and the data needed to determine the indicators of the spatial stand structure were determined. According to the Clark–Evans aggregation index, there is a tendency towards a uniform spatial distribution of trees in the stand in the case when all trees are observed. When only fir trees are observed, it is evident that there is a tendency to group fir trees in the stand. The diameter differentiation index shows that there is average tree diameter differentiation on all sample plots. The determined values of the Weber height competition index by stands are approximately the same, that is, it can be stated that there is no significant difference between stands in terms of competition between trees as regards the vertical structure of stands.
- 31 August 2021
- Published by MDPI AG in Environmental Sciences Proceedings
- Vol. 13 (1) , 20
Open AccessSpatial Structure of Uneven-Aged Stands of Fir and Beech on the Borja Mountain (Bosnia and Herzegovina)
In the territory of Bosnia and Herzegovina, uneven-aged stands of fir and beech are very important from the economic and ecological points of view. A major lack of information on the simple structure of stands is that it cannot be used to draw valid conclusions about the spatial distribution of woody species and about the position and dimensions of trees, and this is one of the bases for the sustainable management of mixed and uneven-aged forests. In four mixed uneven-aged fir and beech stands and one pure fir stand on Mt Borja, the basic elements of tree growth were measured and the data needed to determine the indicators of the spatial stand structure were determined. According to the Clark–Evans aggregation index, there is a tendency towards a uniform spatial distribution of trees in the stand in the case when all trees are observed. When only fir trees are observed, it is evident that there is a tendency to group fir trees in the stand. The diameter differentiation index shows that there is average tree diameter differentiation on all sample plots. The determined values of the Weber height competition index by stands are approximately the same, that is, it can be stated that there is no significant difference between stands in terms of competition between trees as regards the vertical structure of stands.
- 7 May 2021
- Published by University of Zagreb, Faculty of Forestry and Wood Technology in Drvna industrija
- Vol. 72 (2) , 193-200
MOR and MOE of Serbian Spruce (Picea omorika Pančić/Purkyně) Wood from Natural Stands
The paper presents the results of testing the bending stress of Serbian spruce wood from natural stands. In testing the samples, in addition to the modulus of rupture, the bending stress at the proportionality limit, the ratio between the stress at the proportionality limit and the modulus of rupture as well as the modulus of elasticity of wood were determined. The study included nine trees from natural stands, and a total of 261 samples were tested. Regression analysis determined the dependences of these mechanical properties on the annual ring width, the proportion of late wood and wood density, as well as the dependence of the modulus of elasticity on the modulus of rupture.
- 7 May 2021
- Published by University of Zagreb, Faculty of Forestry and Wood Technology in Drvna industrija
- Vol. 72 (2) , 193-200
MOR and MOE of Serbian Spruce (Picea omorika Pančić/Purkyně) Wood from Natural Stands
The paper presents the results of testing the bending stress of Serbian spruce wood from natural stands. In testing the samples, in addition to the modulus of rupture, the bending stress at the proportionality limit, the ratio between the stress at the proportionality limit and the modulus of rupture as well as the modulus of elasticity of wood were determined. The study included nine trees from natural stands, and a total of 261 samples were tested. Regression analysis determined the dependences of these mechanical properties on the annual ring width, the proportion of late wood and wood density, as well as the dependence of the modulus of elasticity on the modulus of rupture.
- Open Access
- 1 January 2018
- Published by National Library of Serbia in Glasnik Sumarskog Fakulteta
- No. 117,p. 119-136
Anisotropy of transversal swelling of Serbian spruce wood (Picea omorika (Pancic) Purkyně)
The paper presents the results of analysis of anisotropy of transverse swelling of the Serbian spruce wood. The analysis included six trees that come from plantations and nine trees from natural stands of Serbian spruce, and a total of 3098 samples were tested. The results show a change in transversal anisotropy at the height of the tree, as well as its change in radius. The dependence of this property on the growth rings width, the participation of late wood and the density of wood was determined by regression analysis.
- 1 January 2018
- Published by National Library of Serbia in Glasnik Sumarskog Fakulteta
- No. 117,p. 119-136
Open AccessAnisotropy of transversal swelling of Serbian spruce wood (Picea omorika (Pancic) Purkyně)
The paper presents the results of analysis of anisotropy of transverse swelling of the Serbian spruce wood. The analysis included six trees that come from plantations and nine trees from natural stands of Serbian spruce, and a total of 3098 samples were tested. The results show a change in transversal anisotropy at the height of the tree, as well as its change in radius. The dependence of this property on the growth rings width, the participation of late wood and the density of wood was determined by regression analysis.