Vairamani Rajasekaran
Research Subjects
Vairamani Rajasekaran has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Irudayaraj Gerald Christopher Raj
P.S.N.A College of Engineering and Technology, Dindigul-624 622, Tamilnadu, India
7 shared publications - Mylsamy Kaliamoorthy
Department of Electrical and Electronics Engineering, PSNA College of Engineering and Technology, Dindigul, India
5 shared publications - Nandha Kumar
Department of Electrical and Electronics Engineering PSNA College of Engineering & Technology, Dindigul TamilNadu, India
4 shared publications - Arul Prasanna Mark
Department of Electrical and Electronics Engineering, Kamaraj College of Engineering and Technology, Madurai, India
3 shared publications K. Gnanambal
3 shared publicationsP. Loganthurai
3 shared publications
Latest Publications
- Open Access
- 1 April 2023
- Published by HM Publishers in Journal of Energy Engineering and Thermodynamics
- No. 33,p. 12-21
Development of Coil Harvesting Energy from the Ambient Magnetic Field
Energy Harvesting from Magnetic Fields has been a popular study topic in recent years since it provides a sustainable and environmentally friendly alternative to existing power sources. The goal of this project is to design and construct a device for collecting energy from an ambient magnetic field using the principle of electromagnetic induction. The gadget will be made up of a magnetic coil. The energy harvester's performance will be examined and adjusted depending on numerous factors such as coil design. IoT gadgets, wearable technology, and remote systems are examples of IoT devices. In this project, a toroidal core voltage is induced in the coil, which is then delivered to the energy storage system and utilised to power IOT systems.
- 1 April 2023
- Published by HM Publishers in Journal of Energy Engineering and Thermodynamics
- No. 33,p. 12-21
Open AccessDevelopment of Coil Harvesting Energy from the Ambient Magnetic Field
Energy Harvesting from Magnetic Fields has been a popular study topic in recent years since it provides a sustainable and environmentally friendly alternative to existing power sources. The goal of this project is to design and construct a device for collecting energy from an ambient magnetic field using the principle of electromagnetic induction. The gadget will be made up of a magnetic coil. The energy harvester's performance will be examined and adjusted depending on numerous factors such as coil design. IoT gadgets, wearable technology, and remote systems are examples of IoT devices. In this project, a toroidal core voltage is induced in the coil, which is then delivered to the energy storage system and utilised to power IOT systems.
- 30 November 2019
- Published by Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication (BEIESP) in International Journal of Innovative Technology and Exploring Engineering
- Vol. 9 (1) , 2624-2628
Module Integrated PV Balancer for PV Applications
This paper presents the possibility of Module Integrated Converters (MIC) called PV balancers for photovoltaic applications. The proposed thought enables self-governing Maximum Power Point Tracking (MPPT) for each board, and radically decreases the requirements for power converters. The power rating of a PV balancer is under 20% of its accomplices, and the collecting cost is as such inside and out diminished. The proposed engineering of the PV balancer is checked through simulation results. It is foreseen that the proposed methodology will be an ease answer for future photovoltaic power frameworks.
- 30 November 2019
- Published by Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication (BEIESP) in International Journal of Innovative Technology and Exploring Engineering
- Vol. 9 (1) , 2624-2628
Module Integrated PV Balancer for PV Applications
This paper presents the possibility of Module Integrated Converters (MIC) called PV balancers for photovoltaic applications. The proposed thought enables self-governing Maximum Power Point Tracking (MPPT) for each board, and radically decreases the requirements for power converters. The power rating of a PV balancer is under 20% of its accomplices, and the collecting cost is as such inside and out diminished. The proposed engineering of the PV balancer is checked through simulation results. It is foreseen that the proposed methodology will be an ease answer for future photovoltaic power frameworks.
- 1 February 2018
- Published by American Scientific Publishers in Journal of Computational and Theoretical Nanoscience
- Vol. 15 (2) , 685-689
Analysis and Performance Evaluation of Control Methods for LLC Resonant Converter
An LLC resonant dc to dc converter in the company of an LC ant resonant tank circuit for civilizing the act of pulse frequency modulation (PFM) is projected in this manuscript. The planned converter, known as LLC-LC converter, can expand a voltage guideline area below the unity gain with a lesser frequency variation of Pulse frequency modulation by the effect of the antiresonant tank. This beneficial possessions contribute for shielding over current in the case of the short-circuit load condition as well as the bring into being interval in the planned band of switching frequency. The circuit topology and working theory of the planned converter is described, subsequent to the design method of the working frequency and circuit parameters are offered. The performance of the soft switch and the steady-state pulse frequency modulation distinctiveness of the LLC-LC converter are evaluated underneath the open-loop control in conduct experiment of a 2.0-kiloWatts trial product, and its real effectiveness is compared with an LLC converter model. Intended for enlightening the usefulness of the LLC-LC resonant circuit, voltages and currents of the series and ant resonant tanks are analyzed, correspondingly, with state-plane trajectory based on computation and experimentation, where by the power and energy of resonant tank is verified. To conclude, the possibility of the projected converter is evaluate from the realistic point of vision.
- 1 February 2018
- Published by American Scientific Publishers in Journal of Computational and Theoretical Nanoscience
- Vol. 15 (2) , 685-689
Analysis and Performance Evaluation of Control Methods for LLC Resonant Converter
An LLC resonant dc to dc converter in the company of an LC ant resonant tank circuit for civilizing the act of pulse frequency modulation (PFM) is projected in this manuscript. The planned converter, known as LLC-LC converter, can expand a voltage guideline area below the unity gain with a lesser frequency variation of Pulse frequency modulation by the effect of the antiresonant tank. This beneficial possessions contribute for shielding over current in the case of the short-circuit load condition as well as the bring into being interval in the planned band of switching frequency. The circuit topology and working theory of the planned converter is described, subsequent to the design method of the working frequency and circuit parameters are offered. The performance of the soft switch and the steady-state pulse frequency modulation distinctiveness of the LLC-LC converter are evaluated underneath the open-loop control in conduct experiment of a 2.0-kiloWatts trial product, and its real effectiveness is compared with an LLC converter model. Intended for enlightening the usefulness of the LLC-LC resonant circuit, voltages and currents of the series and ant resonant tanks are analyzed, correspondingly, with state-plane trajectory based on computation and experimentation, where by the power and energy of resonant tank is verified. To conclude, the possibility of the projected converter is evaluate from the realistic point of vision.
- 1 December 2017
- Published by American Scientific Publishers in Journal of Computational and Theoretical Nanoscience
- Vol. 14 (12) , 5797-5803
Performance Analysis of a Novel Torque Controller in Direct Torque Control-Current Source Inverter Fed IM Drives at Low Speed with Minimum Ripple Torque
This paper proposes a novel torque estimator to improve the performance of DTC–CSI fed induction motor drive (IMD) and reduce the torque ripple during low speed operation. For effective operation of direct torque control method the electromagnetic torque and stator flux can be estimated from the stator quantities such as voltage and currents. The estimated stator flux can be affected by the parameter variation such as stator resistance due to temperature at low speed operation results torque ripples and the system become unstable. A modified torque estimator based on MRAS principle implemented in this paper to overcome this problem and makes a system with dynamic performance. The effectiveness of proposed control method is verified using simulation and experimental results. The results prove that torque ripple has been significantly reduced and system performance improved at low speed operation.
- 1 December 2017
- Published by American Scientific Publishers in Journal of Computational and Theoretical Nanoscience
- Vol. 14 (12) , 5797-5803
Performance Analysis of a Novel Torque Controller in Direct Torque Control-Current Source Inverter Fed IM Drives at Low Speed with Minimum Ripple Torque
This paper proposes a novel torque estimator to improve the performance of DTC–CSI fed induction motor drive (IMD) and reduce the torque ripple during low speed operation. For effective operation of direct torque control method the electromagnetic torque and stator flux can be estimated from the stator quantities such as voltage and currents. The estimated stator flux can be affected by the parameter variation such as stator resistance due to temperature at low speed operation results torque ripples and the system become unstable. A modified torque estimator based on MRAS principle implemented in this paper to overcome this problem and makes a system with dynamic performance. The effectiveness of proposed control method is verified using simulation and experimental results. The results prove that torque ripple has been significantly reduced and system performance improved at low speed operation.
- 1 December 2017
- Published by American Scientific Publishers in Journal of Computational and Theoretical Nanoscience
- Vol. 14 (12) , 5851-5857
Design and Analysis of FPGA Controller Based Pulse Width Modulation Boost Rectifier in Marine Applications
- 1 December 2017
- Published by American Scientific Publishers in Journal of Computational and Theoretical Nanoscience
- Vol. 14 (12) , 5851-5857
Design and Analysis of FPGA Controller Based Pulse Width Modulation Boost Rectifier in Marine Applications
- 1 January 2017
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Electronics Express
- Vol. 14 (22) , 20170940
Design and analysis of Z-source based 7 level cascaded multi level inverter for induction motor
- 1 January 2017
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Electronics Express
- Vol. 14 (22) , 20170940
Design and analysis of Z-source based 7 level cascaded multi level inverter for induction motor
- 5 September 2016
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 35 (5) , 1575-1591
Three phase z-source neutral point clamped inverter with multicarrier PWM technique
Purpose: The purpose of this paper is to present the three phase seven-level Z-source neutral point clamped (NPC) inverter with multicarrier pulse-width modulation (PWM) technique. Despite numerous topologies and modulation methods, there is a dire need of developing PWM techniques that can be deployed in multilevel inverters. These inverters decrease the total harmonic distortion and it has a good performance for various electrical power system applications. The proposed inverter is investigated for its performance by executing it in shoot through and non-shoot through modes. Design/methodology/approach: The purpose is validated through MATLAB/Simulink software platform for implementing the proposed seven-level Z-source NPC inverter outlined with multicarrier based phase disposition technique. The experimental results are verified using SPARTAN 3E FPGA controller with the same control strategy. Findings: The efficiency of the proposed inverter is confirmed in terms of increased and faster conversion in the shoot-through mode. By using PDPWM technique the maximum boost gain is achieved with lower modulation index. High control of DC voltage is obtained with only one DC voltage source and one Z network. Originality/value: Three phase multilevel inverters are widely used in improving the output voltage quality and reducing the encountered electromagnetic interference in electronic device or circuitry. They are employed in medium and high –power applications to attain increased power ratings while decreasing the switching losses. The performance results shown in this paper will satisfy the above needs of usage in certain applications and less switching losses.
- 5 September 2016
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 35 (5) , 1575-1591
Three phase z-source neutral point clamped inverter with multicarrier PWM technique
Purpose: The purpose of this paper is to present the three phase seven-level Z-source neutral point clamped (NPC) inverter with multicarrier pulse-width modulation (PWM) technique. Despite numerous topologies and modulation methods, there is a dire need of developing PWM techniques that can be deployed in multilevel inverters. These inverters decrease the total harmonic distortion and it has a good performance for various electrical power system applications. The proposed inverter is investigated for its performance by executing it in shoot through and non-shoot through modes. Design/methodology/approach: The purpose is validated through MATLAB/Simulink software platform for implementing the proposed seven-level Z-source NPC inverter outlined with multicarrier based phase disposition technique. The experimental results are verified using SPARTAN 3E FPGA controller with the same control strategy. Findings: The efficiency of the proposed inverter is confirmed in terms of increased and faster conversion in the shoot-through mode. By using PDPWM technique the maximum boost gain is achieved with lower modulation index. High control of DC voltage is obtained with only one DC voltage source and one Z network. Originality/value: Three phase multilevel inverters are widely used in improving the output voltage quality and reducing the encountered electromagnetic interference in electronic device or circuitry. They are employed in medium and high –power applications to attain increased power ratings while decreasing the switching losses. The performance results shown in this paper will satisfy the above needs of usage in certain applications and less switching losses.
- 5 September 2016
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 35 (5) , 1560-1574
Performance analysis of LCLC resonant converter with PI and fuzzy gain scheduled PI controllers
Purpose: The purpose of this paper is to analyze the performance of LCLC resonant converter (RC) with proportional integral controller and fuzzy gain scheduled proportional integral controller. Design/methodology/approach: The drawbacks of series RC and parallel resonant converter (PRC) are explained using relevant references in Section 1 of this paper. The necessity of RCs and the merits of zero voltage and zero current switching are given in the Section 2. In Section 3, the modeling of LCLC RC using state space technique is done. In Section 4, the open loop analysis and performance evaluation of proportional integral controller, fuzzy gain scheduled proportional controller using MATLAB Simulink is obtained. The hardware specification is given and experimental results are taken for LCLC RC. In Section 5, conclusion of study is given. Findings: The LCLC RC overcomes the drawbacks of series and PRC. The fuzzy gain scheduled proportional integral controller is suitable for load variations in RC. Originality/value: The output of the converter is not affected with the load variations since the controller suggested in the paper works for load changes and can be a solution for load parameter deviation applications. Also performance of the RC is improved by the fast response of the proposed controller.
- 5 September 2016
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 35 (5) , 1560-1574
Performance analysis of LCLC resonant converter with PI and fuzzy gain scheduled PI controllers
Purpose: The purpose of this paper is to analyze the performance of LCLC resonant converter (RC) with proportional integral controller and fuzzy gain scheduled proportional integral controller. Design/methodology/approach: The drawbacks of series RC and parallel resonant converter (PRC) are explained using relevant references in Section 1 of this paper. The necessity of RCs and the merits of zero voltage and zero current switching are given in the Section 2. In Section 3, the modeling of LCLC RC using state space technique is done. In Section 4, the open loop analysis and performance evaluation of proportional integral controller, fuzzy gain scheduled proportional controller using MATLAB Simulink is obtained. The hardware specification is given and experimental results are taken for LCLC RC. In Section 5, conclusion of study is given. Findings: The LCLC RC overcomes the drawbacks of series and PRC. The fuzzy gain scheduled proportional integral controller is suitable for load variations in RC. Originality/value: The output of the converter is not affected with the load variations since the controller suggested in the paper works for load changes and can be a solution for load parameter deviation applications. Also performance of the RC is improved by the fast response of the proposed controller.
- Open Access
- 13 August 2015
- Published by Indian Society for Education and Environment in Indian Journal of Science and Technology
- Vol. 8 (18)
Performance Analysis of DTC-CSI fed IPMSM Drive at Very Low Speed with Stator Resistance Compensation
- 13 August 2015
- Published by Indian Society for Education and Environment in Indian Journal of Science and Technology
- Vol. 8 (18)
Open AccessPerformance Analysis of DTC-CSI fed IPMSM Drive at Very Low Speed with Stator Resistance Compensation