VNVasilij D. Natsik

Vasilij D. Natsik

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Vasilij D. Natsik has a total of 133 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Thermally Activated Acoustic Relaxation in Nanostructured and Ultrafine-Grained Titanium

    by Yuri Semerenko, Vasilij Natsik, Nikolai Galtsov, Diana Hurova, Tamara Bednarchuk, Peter Zinoviev, Viktor Zoryansky, Vladyslav Moskalenko, Ruslan Smolianets, Alexander Smirnov, et al.

    In the range of 5-325 K, the temperature dependence of acoustic properties - absorption and dynamic Young’s modulus - was studied in nanocrystalline and fine-crystalline technical purity titanium VT1-0. Measurements were performed using resonance mechanical spectroscopy at 2.4-3.7 kHz. The influence of grain size on low-temperature acoustic behavior was examined.Samples with varying grain sizes were produced by severe plastic deformation through rolling at 100 K and 290 K to true strains of 120-190%, followed by annealing at 525 K, 720 K, and 940 K. Their structures were characterized by electron microscopy and X-ray diffraction.Intense plastic deformation was found to induce an acoustic anomaly, peak P1, at 150-230 K. Transition from fine- to nanocrystalline states introduced an additional absorption peak, P2, at 43-78 K. A microscopic dislocation model was proposed to explain these phenomena. The activation parameters of P1 correspond to thermally activated detachment of dislocation segments from local defects, consistent with the Koiwa-Hasiguti peak. In contrast, the activation parameters of P2 reflect dislocation motion across a Peierls barrier via thermally activated kink pair formation, analogous to Bordoni peaks observed in fcc crystals.This study demonstrates how grain refinement and deformation strongly affect the acoustic response of titanium, revealing distinct mechanisms of dislocation dynamics at different temperature ranges.

  • Open Access

    Analysis of the Dislocation Structure, Kinetics and Dynamics in the High-Entropy Alloy Al0.5CoCrCuFeNi

    by Vasilij Natsik, Yuri Semerenko, Nikolai Galtsov, Diana Hurova, Viktor Zoryansky, Elena Tabachnikova, Tamara Bednarchuk, Peter Zinoviev

    A theoretical analysis of low-temperature plastic deformation processes and acoustic relaxation in the high-entropy alloy Al 0.5 CoCrCuFeNi has been conducted. Within the framework of proposed dislocation model it was established the key types of dislocation defects in the alloy's lattice structure; types of barriers that hinder the movement of dislocation lines (strings); and mechanisms of thermally activated movement of various dislocation line elements through these barriers at room and low temperatures. Using this model, quantitative estimates have been derived for significant dislocation characteristics and their interaction with barriers, such as the distance between local obstacles in the slip plane ∼ 4 nm, the Peierls stress for dislocations in an easy slip system 4 · 10 6 Pa, and more. Additionally, an estimated speed of sound 3.4 · 10 3 m/s based on the proposed model aligns well with the direct experimental data. The empirical estimates for the energy per unit length of a dislocation ∼ 10 -8 J/m and the linear mass density ∼ 10 -15 kg/m are consistent with modern continuum dislocation theory. A detailed examination of the structure of the alloy Al 0.5 CoCrCuFeNi was carried out using X-ray diffraction and Energy Dispersive Spectroscopy techniques. Numerical estimates of the dislocation density ∼ 5 · 10 15 m -2 were obtained through Williamson-Hall analysis of X-ray diffraction patterns. It was found to correlate with the estimates overall length of dislocation segments per unit volume which effectively interacts with elastic vibrations of the sample ∼ 4 · 10 13 m -2 , as determined from acoustic relaxation measurements.


  • Description of the tension kinetics of amorphous and amorphous-crystalline polymers under conditions of moderate and deep cooling by the common nonlinear rheological equation

    by V. D. Natsik, H. V. Rusakova, V. A. Lototskaya

    The comparative analysis of the results of low-temperature mechanical tests of the samples of amorphous and amorphous-crystalline polyimide of the Kapton H type was carried out. In the experiments [East Eur. J. Phys., No. 4, 144 (2020)], tensile diagrams σ(ɛ;T,ε˙) of such samples were recorded, namely, the dependences of the deforming stress on the strain ɛ = ε˙t at constant values of the strain rate ε˙ = 7⋅10–5, 7⋅10–4, 6⋅10–3 s–1, and temperature T = 293, 77, and 4.2 K. The initial aim of these experiments was to study the effect of moderate (77 K) and deep (4.2 K) cooling on the structure and some mechanical characteristics of polyimide, important for its use in cryogenic and aerospace engineering. Later (Low Temp. Phys. 49, 521 (2023) [Fiz. Nyzk. Temp. 49, 569 (2023)]), there was a need and opportunity to supplement the experimental results with additional analysis in order to use them to test new aspects of the theory of low-temperature elastic-viscous deformation of polymers, in particular, the description of the effects of forced elasticity and their competition with brittle fracture processes. A detailed comparison of the tensile diagrams of the polyimide samples with amorphous and amorphous-crystalline mole­cular structures performed in this study showed that at T = 293 K both structures have clearly pronounced pro­perties of the elastomers, namely, the rubber-like materials with high elasticity and the ability to reversible deformation. It has been established that amorphous samples retain these properties up to deep cooling at T = 4.2 K, and amorphous-crystalline ones only to a state of moderate cooling: at T < 77 K they acquire the properties of glassy materials with brittle fracture at the initial stage of elastic deformation. It is also shown that the kinetics of highly elastic deformation of polyimide with molecular structures of both types is due to the thermomechanical activation of soliton-like elaston excitations on molecular chains in the amorphous component of the material and is described by a nonlinear rheological equation derived earlier for the molecular model of an amorphous polymer: Low Temp. Phys. 48, 253 (2022) [Fiz. Nyzk. Temp. 48, 281 (2022)], Low Temp. Phys. 49, 228 (2023) [Fiz. Nyzk. Temp. 49, 246 (2023)]. By comparing the results of experiments and theory, an analytical description of the tension diagrams σ(ɛ;T,ε˙) of polyimide samples with molecular structures of both types was obtained, as well as empirical estimates of their rheological characteristics and microscopic parameters of elaston excitations. During low-temperature deformation of a polymer with a mixed structure, rigid crystalline fibrils immersed in the softer amorphous medium undergo only minor elastic deformations, but significantly increase the intensity of elaston activation and fracture processes in the amorphous component. Upon cooling, this leads to the convergence of critical stresses of highly elastic relaxation and fracture and to the transformation of an elastomer with such a structure into a glassy brittle material.

  • Open Access

    Effect of Annealing on the Structure of the High-Entropy Alloy Al0.5CoCrCuFeNi

    by Yuri Semerenko, Vasilij Natsik, Nikolay Galtsov, Diana Hurova, Viktor Zoryansky, Elena Tabachnikova, Tamara Bednarchuk, Jullia Lipovska, Igor Kolodiy, Peter Zinoviev

    A detailed examination of the effect of annealing on the structure of the high-entropy alloy Al0.5CoCrCuFeNi was carried out using different methods of electron microscopy and X-ray structural analysis techniques. Numerical estimates of the dislocation density 5·1015 m-2, the mean size of the ordered (crystalline) domains 18 nm and lattice micro strain 3·10-3 were obtained through Williamson–Hall analysis of XRD patterns. The estimates of the dislocation density was found to correlate with the estimates of the total length of dislocation segments per unit volume which effectively interacts with elastic vibrations of the sample 4·1013 m-2, as determined from acoustic relaxation measurements. This is consistent with the idea that a significant portion of dislocations are concentrated in grain boundaries, and only dislocation segments located inside grains and having a favorable orientation with respect to the direction of sound wave propagation can effectively interact with cyclic deformation of the sample.

  • Dislocation mechanisms of acoustic relaxation and plastic deformation of a high-entropy alloy Al0.5CoCrCuFeNi under moderate to deep cooling conditions: Experiment and theory (Review)

    by V. D. Natsik, Yu. O. Semerenko, E. D. Tabachnikova

    The review highlights, analyzes, and summarizes the results of experimental and theoretical study of the general laws and specific features of low-temperature inelastic deformation of a new class of materials, namely, high-entropy alloys (HEAs). The results of a ten-year experimental study of the patterns of acoustic relaxation and the initial stage of plastic deformation of one of the typical representatives of high-entropy alloys—the six-component Al0.5CoCrCuFeNi alloy are described in detail under conditions of moderate (from 300 to 77 K), strong (from 77 to 4.2 K) and deep (from 4.2 to 0.5 K) cooling. In experiments, the temperature dependences of the dynamic moduli of elasticity and internal friction, as well as the main characteristics of the deformation diagrams of polycrystalline samples of the alloy with an fcc atomic structure of grains and a complex morphology of wide grain boundaries, were obtained. The connection between the experimentally recorded features of acoustic and plastic deformation of the alloy and the features of the dynamics and kinetics of elementary dislocation processes in grains and grain boundaries is discussed. At low temperatures, when thermally activated excitation of structural rearrangements in grain boundaries is exponentially weakened, the inelastic deformation of HEAs polycrystals is determined by the nucleation and motion of dislocation-type lattice defects in planes of easy intragrained slip. Analysis and physical interpretation of these processes based on modern dislocation theory made it possible to establish the following: the most important types of defects in the lattice structure of the alloy; types of barriers that prevent the motion of dislocations inside the grains during low-temperature deformation; adequate mechanisms of thermally activated dislocation motion over the barriers at low temperatures; quantitative estimates for the most important characteristics of dislocations and their interaction with barriers.


  • Open Access

    Investigation of Structure of the High-Entropy Alloy Al0.5CoCrCuFeNi

    by Semerenko Yuri, Natsik Vasilij, Galtsov Nikolai, Hurova Diana, Zoryansky Victor, Tabachnikova Elena, Bednarchuk Tamara, Kolodiy Igor, Zinoviev Peter

    SCIEPublish is an international open-access journal publishing service provider run by SCIE Publishing Limited, dedicated to supporting and inspiring scientists or institutions/societies who aspire to publish high-quality journals.


  • Open Access

    Mechanisms of Low-Temperature Dislocation Motion in High-Entropy Al0.5CoCrCuFeNi Alloy

    by Yuri O. Semerenko, Vasilij D. Natsik, Elena D. Tabachnikova, Yi Huang, Terence G. Langdon

    An analysis of the processes of plastic deformation and acoustic relaxation in a high-entropy alloy, Al0.5CoCrCuFeNi, was carried out. The following were established: dominant dislocation defects; types of barriers that prevent the movement of dislocations; mechanisms of thermally activated movement of various elements of dislocation lines through barriers at room and low temperatures. Based on modern dislocation theory, quantitative estimates were obtained for the most important characteristics of dislocations and their interaction with barriers.


  • Open Access

    Mechanisms of Low-Temperature Dislocation Motion in High-Entropy Al0.5CoCrCuFeNi Alloy

    by Yuri Semerenko, Vasilij Natsik, Elena Tabachnikova, Yi Huang, Terence G. Langdon

    An analysis of the processes of plastic deformation and acoustic relaxation in a high-entropy alloy Al0.5CoCrCuFeNi was carried out. The following have been established: dominant dislocation defects; types of barriers that prevent the movement of dislocations; mechanisms of thermally activated movement of various elements of dislocation lines through barriers at room and low temperatures. Based on modern dislocation theory, quantitative estimates have been obtained for the most important characteristics of dislocations and their interaction with barriers.


  • Dislocation mechanisms of low-temperature plasticity of nanocrystalline titanium: The role of impurity and grain boundary strengthening

    by V. A. Moskalenko, R. V. Smolianets, V. D. Natsik, Yu. M. Pohribna

    The temperature dependences of the yield strength, the strain rate sensitivity of the deforming stress and the activation volume of the process of plastic deformation of nanocrystalline titanium VT1-0 under quasi-static tension in the temperature range 4.2–395 K are found. The nanoscale grain size was obtained using the method of cryomechanical grain fragmentation. A detailed thermal activation analysis of the experimental results was carried out and it was shown that the process of plastic deformation under conditions of ambient and low temperatures is determined by the overcoming of local impurity barriers by dislocations, and grain boundaries are a source of internal stresses. Empirical estimates are obtained for the parameters of the dislocation-impurity interaction. The unambiguous relationship between internal stresses and grain size established for monomodal nanocrystalline titanium made it possible to separate the effects of impurity and grain boundary hardening. The result obtained is an indirect basis for the conclusion about the impossibility of accumulation of dislocations in nanograins during plastic deformation. The decrease in the activation volume for a nanoscale grain at a constant impurity concentration is considered because of the manifestation of the dependence of the diameter of the dislocation loop generated by a grain boundary source on the grain size (confinement effect).


  • Open Access

    Low temperature peak of internal friction in high entropy Al0.5CoCrCuFeNi alloy

    by Yu. A. Semerenko, V. D. Natsik

    The dynamic elasticity and internal friction of the highly entropic Al0.5CoCrCuFeNi alloy were studied in a wide low temperature range of 4.2–300 K. In the experiments, the bending vibrations of thin plates at a frequency of 530 Hz were studied in two structural states: samples prepared after crystallizing a cast alloy (I); the same samples after prolonged high-temperature annealing (II). The temperature dependences of internal friction Q−1(T) and dynamic Young’s modulus E(T) were obtained and analyzed for these structural states. In state I, both dependences are monotonic functions without any specific features: the internal friction decreases with a decrease in temperature from Q I − 1 ( T = 300 K ) ≃ 10 − 3 to Q I − 1 ( T = 4.2 K ) ≃ 10 − 4 , while Young’s modulus increases from EI(T = 300 K); 180 GPa to EI(T = 4.2 K); 190 GPa. Upon the transition to state II, the Q II − 1 ( T ) plot acquires a peak with a height of about 10−4 and a center at Tp; 228 K, without significant changes in internal friction at other temperatures. Young modulus EII(Т) significantly increases (by 20% on average) at all temperatures, and near Tp; 228 K a blurred step with a height of ΔEII ≈ 0.3 GPa ≈ 10−4 EII(T = 4.2 K) appears on the EII(T) plot. Statistical and thermoactivation analysis of the anomaly of the alloy’s viscoelastic properties near Tp; 228 K by the previously developed algorithm [V. D. Natsik, Yu. A. Semerenko, FNT 42, 185 (2016)] led to the conclusion that it is caused by the resonance interaction of the plate’s elastic vibrations with the dynamic processes in the system of dislocation relaxators, i.e., the thermally activated unpinning of the dislocation segments from the local defects [M. Koiwa and R. R. Hasiguti, Acta Met. 13, 1219 (1965)]. High temperature annealing of the cast alloy is accompanied by significant changes in the morphology and dislocation structure of the samples, which results in a significant increase in their elasticity (Young’s modulus), and the appearance of an internal friction peak at moderately low temperatures. The properties of this peak are similar to those of Hasiguti peaks or β-peaks in simple metals with FCC and BCC lattices.