Jussara Câmara Cardozo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jussara Câmara Cardozo has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Carlos Alberto Martinez Huitle
Renewable Energies and Environmental Sustainability Research Group Institute of Chemistry Federal University of Rio Grande do Norte Natal Rio Grande do Norte Brazil
6 shared publications - Elisama Vieira dos Santos
Renewable Energies and Environmental Sustainability Research Group Institute of Chemistry Federal University of Rio Grande do Norte Natal Rio Grande do Norte Brazil
6 shared publications - Luis David Loor-Urgilés
Renewable Energies and Environmental Sustainability Research Group, Institute of Chemistry, Federal University of Rio Grande do Norte, Lagoa Nova, Natal CEP 59078-970, RN, Brazil
2 shared publications - Mayra Kerolly Sales Monteiro
Renewable Energies and Environmental Sustainability Research Group, Institute of Chemistry, Federal University of Rio Grande do Norte, Campus Universitário, Av. Salgado Filho 3000, Lagoa Nova, Natal CEP 59078-970, RN, Brazil
2 shared publications - Aline Maria Sales Solano
Renewable Energies and Environmental Sustainability Research Group, Institute of Chemistry, Federal University of Rio Grande do Norte, Campus Universitário, Av. Salgado Filho 3000, Lagoa Nova, Natal 59078-970, RN, Brazil
1 shared publication Amanda D. Gondim
Renewable Energies and Environmental Sustainability Research Group Institute of Chemistry, Federal University of Rio Grande do Norte, Campus Universitário, Av. Salgado Filho 3000, Lagoa Nova, Natal, Rio Grande do Norte CEP 59078-970, Brazil
1 shared publication
Latest Publications
- Open Access
Performance of a Flow-Through Electro-Fenton Reactor for Dye Degradation: Influence of Hydrodynamics and Anodic Material
This study investigated the influence of a novel flow–through electro-Fenton (EF) reactor configuration on hydrodynamics and dye removal efficiency using Pt and boron-doped diamond (BDD) anodes coupled with a carbon–PTFE gas diffusion cathode. In this work, an innovative pre–pilot-scale reactor operating in recirculation mode was used to treat 100 mg L−1 Calcon dye solutions in 0.05 mol L−1 Na2SO4 at pH 3.0 under electrochemical oxidation (EO) with electrogenerated H2O2 (EO-H2O2), EF, and Photoelectro-Fenton (PEF) conditions. The effects of applied current density (30–90 mA cm−2) and Fe2+ concentration (0.25–0.75 mmol L−1) were evaluated through color removal, TOC decay, and identification of oxidation intermediates. The hydrodynamic characterization results revealed flow conditions in a transitional region between laminar and turbulent flow (Re = 3.6 × 103; Sh = 246). Comparing EF and EO-H2O2 processes, when Fe2+ was added to the solution, it significantly accelerated discoloration and, consequently, dye degradation in the former, while the absence of Fe2+ resulted in slower discoloration kinetics, reaching only 85.8% color removal after 180 min in the latter. The best performance was obtained with 0.50 mmol L−1 Fe2+ in EF, achieving >98% discoloration. Among the investigated processes, PEF exhibited the highest mineralization efficiency. TOC removals using BDD as the anode efficiently reached high mineralization levels of 83.88%, 86.99%, and 93.38% for EO-H2O2, EF, and PEF, respectively, while Pt as the anode achieved 81.80%, 85.14%, and 91.63%. Overall, the BDD/PEF system showed the best degradation and mineralization performance. The proposed reactor was designed at the pre-pilot scale and incorporates vertical recirculation flow with hydrodynamic optimization, enabling efficient mass transfer and improved oxidant generation. The study provides practical insights into the reactor engineering aspects required for the future scale-up of EF technologies.
Open AccessPerformance of a Flow-Through Electro-Fenton Reactor for Dye Degradation: Influence of Hydrodynamics and Anodic Material
This study investigated the influence of a novel flow–through electro-Fenton (EF) reactor configuration on hydrodynamics and dye removal efficiency using Pt and boron-doped diamond (BDD) anodes coupled with a carbon–PTFE gas diffusion cathode. In this work, an innovative pre–pilot-scale reactor operating in recirculation mode was used to treat 100 mg L−1 Calcon dye solutions in 0.05 mol L−1 Na2SO4 at pH 3.0 under electrochemical oxidation (EO) with electrogenerated H2O2 (EO-H2O2), EF, and Photoelectro-Fenton (PEF) conditions. The effects of applied current density (30–90 mA cm−2) and Fe2+ concentration (0.25–0.75 mmol L−1) were evaluated through color removal, TOC decay, and identification of oxidation intermediates. The hydrodynamic characterization results revealed flow conditions in a transitional region between laminar and turbulent flow (Re = 3.6 × 103; Sh = 246). Comparing EF and EO-H2O2 processes, when Fe2+ was added to the solution, it significantly accelerated discoloration and, consequently, dye degradation in the former, while the absence of Fe2+ resulted in slower discoloration kinetics, reaching only 85.8% color removal after 180 min in the latter. The best performance was obtained with 0.50 mmol L−1 Fe2+ in EF, achieving >98% discoloration. Among the investigated processes, PEF exhibited the highest mineralization efficiency. TOC removals using BDD as the anode efficiently reached high mineralization levels of 83.88%, 86.99%, and 93.38% for EO-H2O2, EF, and PEF, respectively, while Pt as the anode achieved 81.80%, 85.14%, and 91.63%. Overall, the BDD/PEF system showed the best degradation and mineralization performance. The proposed reactor was designed at the pre-pilot scale and incorporates vertical recirculation flow with hydrodynamic optimization, enabling efficient mass transfer and improved oxidant generation. The study provides practical insights into the reactor engineering aspects required for the future scale-up of EF technologies.
- 11 August 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (9)
Biodiesel Waste-Based Additive as an Environmental-Sustainable Approach for Cyanide-Free Zinc Electroplating Process
Biofuel production has increased significantly as a result of the rush to decarbonize fuels, which has led to a notable increase in the amount of glycerol waste generated. The innovation of this study results from incorporating glycerol waste to optimize the zinc electrodeposition process on brass substrates, reducing the need for effluent disposal and promoting the circular economy through the use of this industrial waste, as well as promoting a sustainable and functional alternative in the field of electroplating. The presence of residual glycerol in low concentrations in its composition allowed to carry out the optimization of zinc electrodeposition on brass substrates. To do that, a central composite experimental design was carried out to investigate the effects of the concentration of industrial glycerol waste, time and current on the process, using the cathodic efficiency of the deposit as the variable response. The experiments were conducted using the Hull cell, a scaled-down unit of an industrial electrodeposition system. The results clearly indicate that the estimated model is predictive (R² = 0.99045), with the effects of the linear and quadratic terms of current and time, quadratic of the concentration of glycerol waste, and the interactions between current and time being significant.
- 11 August 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (9)
Biodiesel Waste-Based Additive as an Environmental-Sustainable Approach for Cyanide-Free Zinc Electroplating Process
Biofuel production has increased significantly as a result of the rush to decarbonize fuels, which has led to a notable increase in the amount of glycerol waste generated. The innovation of this study results from incorporating glycerol waste to optimize the zinc electrodeposition process on brass substrates, reducing the need for effluent disposal and promoting the circular economy through the use of this industrial waste, as well as promoting a sustainable and functional alternative in the field of electroplating. The presence of residual glycerol in low concentrations in its composition allowed to carry out the optimization of zinc electrodeposition on brass substrates. To do that, a central composite experimental design was carried out to investigate the effects of the concentration of industrial glycerol waste, time and current on the process, using the cathodic efficiency of the deposit as the variable response. The experiments were conducted using the Hull cell, a scaled-down unit of an industrial electrodeposition system. The results clearly indicate that the estimated model is predictive (R² = 0.99045), with the effects of the linear and quadratic terms of current and time, quadratic of the concentration of glycerol waste, and the interactions between current and time being significant.
- Open Access
- 14 July 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (29) , 31466-31479
Sustainable Photovoltaic-Powered Series Electrochemical Reactors Using Nonactive Electrocatalytic Materials for Electro-Refinery in Organics and Energy Production
The applicability of an electrochemical device with a series design and configuration, powered by photovoltaic panels, was tested as an integrated-hybrid approach for energy-efficient electrochemical green H2 production coupled with dye effluent upgrading. This electrochemical strategy investigated the electroconversion efficiencies of a model organic compound into carboxylic acids by applying 15, 30, and 45 mA cm-2, with simultaneous production of green H2. Fluorine-doped lead oxide (PbO2-F) and boron-doped diamond (BDD) electrodes were used as anodes in a three-compartment flow reactor, in series mode with different anodic order: setting 1 (PbO2-F + BDD) and setting 2 (BDD + PbO2-F). PbO2-F was successfully prepared using the electrodeposition method, and it was characterized. The results clearly showed that configuration 1 (PbO2-F + BDD) consumed 10.47 kWh m-3 after 120 min of electrolysis by applying 45 mA cm-2, achieving 42.5% organic removal efficiency and producing simultaneously 0.7 L of green H2. Meanwhile, the configuration 2 (BDD + PbO2-F) consumed 16.18 kWh m-3 under the same operating conditions, achieving 47.5% organic load removal and producing 0.75 L of green H2. Discoloration of the effluent was efficiently achieved in all cases. Carboxylic acid production was monitored over time at different conditions tested. Notably, a selective production of malonic acid (28% conversion efficiency) was attained using setting 1, and consequently, upgrading the electro-refinery concept using wastewater residues.
- 14 July 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (29) , 31466-31479
Open AccessSustainable Photovoltaic-Powered Series Electrochemical Reactors Using Nonactive Electrocatalytic Materials for Electro-Refinery in Organics and Energy Production
The applicability of an electrochemical device with a series design and configuration, powered by photovoltaic panels, was tested as an integrated-hybrid approach for energy-efficient electrochemical green H2 production coupled with dye effluent upgrading. This electrochemical strategy investigated the electroconversion efficiencies of a model organic compound into carboxylic acids by applying 15, 30, and 45 mA cm-2, with simultaneous production of green H2. Fluorine-doped lead oxide (PbO2-F) and boron-doped diamond (BDD) electrodes were used as anodes in a three-compartment flow reactor, in series mode with different anodic order: setting 1 (PbO2-F + BDD) and setting 2 (BDD + PbO2-F). PbO2-F was successfully prepared using the electrodeposition method, and it was characterized. The results clearly showed that configuration 1 (PbO2-F + BDD) consumed 10.47 kWh m-3 after 120 min of electrolysis by applying 45 mA cm-2, achieving 42.5% organic removal efficiency and producing simultaneously 0.7 L of green H2. Meanwhile, the configuration 2 (BDD + PbO2-F) consumed 16.18 kWh m-3 under the same operating conditions, achieving 47.5% organic load removal and producing 0.75 L of green H2. Discoloration of the effluent was efficiently achieved in all cases. Carboxylic acid production was monitored over time at different conditions tested. Notably, a selective production of malonic acid (28% conversion efficiency) was attained using setting 1, and consequently, upgrading the electro-refinery concept using wastewater residues.
- Open Access
Electrochemical Looping Green Hydrogen Production by Using Water Electrochemically Treated as a Raw Material for the Electrolyzer
In this study, the applicability of an integrated-hybrid process was performed in a divided electrochemical cell for removing organic matter from a polluted effluent with simultaneous production of green H2. After that, the depolluted water was reused, for the first time, in the cathodic compartment once again, in the same cell to be a viable environmental alternative for converting water into energy (green H2) with higher efficiency and reasonable cost requirements. The production of green H2 in the cathodic compartment (Ni-Fe-based steel stainless (SS) mesh as cathode), in concomitance with the electrochemical oxidation (EO) of wastewater in the anodic compartment (boron-doped diamond (BDD) supported in Nb as anode), was studied (by applying different current densities (j = 30, 60 and 90 mA cm−2) at 25 °C) in a divided-membrane type electrochemical cell driven by a photovoltaic (PV) energy source. The results clearly showed that, in the first step, the water anodically treated by applying 90 mA cm−2 for 180 min reached high-quality water parameters. Meanwhile, green H2 production was greater than 1.3 L, with a Faradaic efficiency of 100%. Then, in a second step, the water anodically treated was reused in the cathodic compartment again for a new integrated-hybrid process with the same electrodes under the same experimental conditions. The results showed that the reuse of water in the cathodic compartment is a sustainable strategy to produce green H2 when compared to the electrolysis using clean water. Finally, two implied benefits of the proposed process are the production of green H2 and wastewater cleanup, both of which are equally significant and sustainable. The possible use of H2 as an energetic carrier in developing nations is a final point about sustainability improvements. This is a win-win solution.
Open AccessElectrochemical Looping Green Hydrogen Production by Using Water Electrochemically Treated as a Raw Material for the Electrolyzer
In this study, the applicability of an integrated-hybrid process was performed in a divided electrochemical cell for removing organic matter from a polluted effluent with simultaneous production of green H2. After that, the depolluted water was reused, for the first time, in the cathodic compartment once again, in the same cell to be a viable environmental alternative for converting water into energy (green H2) with higher efficiency and reasonable cost requirements. The production of green H2 in the cathodic compartment (Ni-Fe-based steel stainless (SS) mesh as cathode), in concomitance with the electrochemical oxidation (EO) of wastewater in the anodic compartment (boron-doped diamond (BDD) supported in Nb as anode), was studied (by applying different current densities (j = 30, 60 and 90 mA cm−2) at 25 °C) in a divided-membrane type electrochemical cell driven by a photovoltaic (PV) energy source. The results clearly showed that, in the first step, the water anodically treated by applying 90 mA cm−2 for 180 min reached high-quality water parameters. Meanwhile, green H2 production was greater than 1.3 L, with a Faradaic efficiency of 100%. Then, in a second step, the water anodically treated was reused in the cathodic compartment again for a new integrated-hybrid process with the same electrodes under the same experimental conditions. The results showed that the reuse of water in the cathodic compartment is a sustainable strategy to produce green H2 when compared to the electrolysis using clean water. Finally, two implied benefits of the proposed process are the production of green H2 and wastewater cleanup, both of which are equally significant and sustainable. The possible use of H2 as an energetic carrier in developing nations is a final point about sustainability improvements. This is a win-win solution.
- 14 April 2025
- Published by Springer Nature in Emergent Materials
- Vol. 8 (4) , 2617-2634
High photocatalytic activity of Nb2O5/Ag composite in solar light-driven photodegradation of Reactive Blue 109 dye
- 14 April 2025
- Published by Springer Nature in Emergent Materials
- Vol. 8 (4) , 2617-2634
High photocatalytic activity of Nb2O5/Ag composite in solar light-driven photodegradation of Reactive Blue 109 dye
- 13 January 2018
- Published by Springer Nature in Environmental Chemistry Letters
- Vol. 16 (2) , 647-652
Sulfate pollution: evidence for electrochemical production of persulfate by oxidizing sulfate released by the surfactant sodium dodecyl sulfate
- 13 January 2018
- Published by Springer Nature in Environmental Chemistry Letters
- Vol. 16 (2) , 647-652
Sulfate pollution: evidence for electrochemical production of persulfate by oxidizing sulfate released by the surfactant sodium dodecyl sulfate