Lagen Kumar Pradhan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lagen Kumar Pradhan has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Manoranjan Kar
Department of Physics, Indian Institute of Technology Patna, Bihta, Patna, India
20 shared publications Rabichandra Pandey
18 shared publicationsSunil Kumar
17 shared publicationsManoranjan Kar
10 shared publicationsSweety Supriya
8 shared publications- Rabichandra Pandey
Indian Institute of Technology Patna, Bihta-801103, Bihar
6 shared publications
Latest Publications
- 31 August 2023
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 35 (47) , 475403
Structural phase transition driven dielectric and optical properties with reduction in band gap in Sr2+ modified BaTiO3 ceramics
Ferroelectric materials with crystal symmetry transition from single phase to multiphase coexistence exhibit anomalous photosensitive properties. The optical properties (optical band gap and photosensitive) found on non-centrosymmetric and centrosymmetric systems achieved research interest because of their interesting behavior. In this regard, the lead-free polycrystalline Ba1−x Sr x TiO3 (BSTO, 0 ⩽ x ⩽ 0.3 ) has been synthesized to explore its crystal structure, dielectric, light absorption, and photocurrent sensing properties for various applications. Both experimental and theoretical studies on BSTO (0 ⩽ x ⩽ 0.3 ) ceramics confirm the crystal symmetry transition with the reduction of band gap as compared to pristine BaTiO3. This crystal symmetry transition plays an important role in varying the various physical properties as it involves the transition from the polar phase to the non-polar phase. The optical band gap has been estimated experimentally by the Tauc plot method and found that there is a small variation of energy band gap from 3.615 eV to 3.212 eV with Sr substitution. The highest dielectric constant was found to be 5327 at lower frequency on Ba0.76Sr0.24TiO3 after that for further increase in Sr concentration the dielectric constant decreases because of the introduction of the non-polar phase. A strong correlation between crystal structure and physical properties (dielectric, optical, etc.) has been observed. The photocurrent of the samples is significant which reveals that the sample is influenced by the photons. In a nutshell, the present study deepens the understanding of the correlation between crystal structure and various physical properties of BSTO and, hence provides an idea of required design parameters to construct a ferroelectric system for better photosensitive nature suitable for device applications.
- 31 August 2023
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 35 (47) , 475403
Structural phase transition driven dielectric and optical properties with reduction in band gap in Sr2+ modified BaTiO3 ceramics
Ferroelectric materials with crystal symmetry transition from single phase to multiphase coexistence exhibit anomalous photosensitive properties. The optical properties (optical band gap and photosensitive) found on non-centrosymmetric and centrosymmetric systems achieved research interest because of their interesting behavior. In this regard, the lead-free polycrystalline Ba1−x Sr x TiO3 (BSTO, 0 ⩽ x ⩽ 0.3 ) has been synthesized to explore its crystal structure, dielectric, light absorption, and photocurrent sensing properties for various applications. Both experimental and theoretical studies on BSTO (0 ⩽ x ⩽ 0.3 ) ceramics confirm the crystal symmetry transition with the reduction of band gap as compared to pristine BaTiO3. This crystal symmetry transition plays an important role in varying the various physical properties as it involves the transition from the polar phase to the non-polar phase. The optical band gap has been estimated experimentally by the Tauc plot method and found that there is a small variation of energy band gap from 3.615 eV to 3.212 eV with Sr substitution. The highest dielectric constant was found to be 5327 at lower frequency on Ba0.76Sr0.24TiO3 after that for further increase in Sr concentration the dielectric constant decreases because of the introduction of the non-polar phase. A strong correlation between crystal structure and physical properties (dielectric, optical, etc.) has been observed. The photocurrent of the samples is significant which reveals that the sample is influenced by the photons. In a nutshell, the present study deepens the understanding of the correlation between crystal structure and various physical properties of BSTO and, hence provides an idea of required design parameters to construct a ferroelectric system for better photosensitive nature suitable for device applications.
- 14 February 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (6) , 064102
Enhanced ferroelectricity and electrocaloric effect of Sm modified BSTO with temperature stability near room temperature
Lead-free ferroelectric materials are essential for environment-friendly solid-state cooling technology. In this respect, the electrocaloric effect of lead-free Ba0.8−xSr0.2SmxTiO3 (x = 0.01–0.05) ceramics has been investigated. The Rietveld refinement reveals that all the ceramics exhibit tetragonal symmetry and the tetragonality decreases for x > 0.03, which is the major reason behind the decrease in both isothermal entropy change and adiabatic temperature change. The degree of diffuseness parameter is enhanced by doping of Sm3+, which confirms the formation of polar nanoregion and the enhancement of the electrocaloric effect parameter by adding extra entropy. The relaxor behavior of the prepared samples is also confirmed by estimating the degree of deviation parameter from the curve. So, the temperature stability of the prepared ceramics is improved in a broad temperature window. The highest isothermal entropy change , adiabatic temperature change , and electrocaloric strength are found to be 1.230 Jkg−1 K−1, 0.862 K, and 0.028 73 K cm/kV at 316 K, respectively, for Ba0.77Sr0.2Sm0.03TiO3.- 14 February 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (6) , 064102
Enhanced ferroelectricity and electrocaloric effect of Sm modified BSTO with temperature stability near room temperature
Lead-free ferroelectric materials are essential for environment-friendly solid-state cooling technology. In this respect, the electrocaloric effect of lead-free Ba0.8−xSr0.2SmxTiO3 (x = 0.01–0.05) ceramics has been investigated. The Rietveld refinement reveals that all the ceramics exhibit tetragonal symmetry and the tetragonality decreases for x > 0.03, which is the major reason behind the decrease in both isothermal entropy change and adiabatic temperature change. The degree of diffuseness parameter is enhanced by doping of Sm3+, which confirms the formation of polar nanoregion and the enhancement of the electrocaloric effect parameter by adding extra entropy. The relaxor behavior of the prepared samples is also confirmed by estimating the degree of deviation parameter from the curve. So, the temperature stability of the prepared ceramics is improved in a broad temperature window. The highest isothermal entropy change , adiabatic temperature change , and electrocaloric strength are found to be 1.230 Jkg−1 K−1, 0.862 K, and 0.028 73 K cm/kV at 316 K, respectively, for Ba0.77Sr0.2Sm0.03TiO3.- Open Access
- 8 September 2021
- Published by IntechOpen
Relaxor Ferroelectric Oxides: Concept to Applications
Ferroelectric ceramic is one of the most important functional materials, which has great importance in modern technologies. A ferroelectric ceramic simultaneously exhibits dielectric, piezoelectric, ferroelectric, and pyroelectric properties. The inherent ferroelectric properties are directly related to long-range electric dipoles arrangement in the ferroelectric domains and its response to external stimuli. However, the interruption of the long-range ordering of dipoles leads to the formation of a special class of material is known as relaxor ferroelectric. It shows quite different physical properties as compared to ferroelectric (normal ferroelectric). The origin and design of relaxor ferroelectric are quite interesting for fundamental perspective along with device applications. Therefore, the origin of relaxor ferroelectric along with its fundamental understanding for possible future applications, have been explained briefly in the present chapter.
- 8 September 2021
- Published by IntechOpen
Open AccessRelaxor Ferroelectric Oxides: Concept to Applications
Ferroelectric ceramic is one of the most important functional materials, which has great importance in modern technologies. A ferroelectric ceramic simultaneously exhibits dielectric, piezoelectric, ferroelectric, and pyroelectric properties. The inherent ferroelectric properties are directly related to long-range electric dipoles arrangement in the ferroelectric domains and its response to external stimuli. However, the interruption of the long-range ordering of dipoles leads to the formation of a special class of material is known as relaxor ferroelectric. It shows quite different physical properties as compared to ferroelectric (normal ferroelectric). The origin and design of relaxor ferroelectric are quite interesting for fundamental perspective along with device applications. Therefore, the origin of relaxor ferroelectric along with its fundamental understanding for possible future applications, have been explained briefly in the present chapter.
- 1 February 2020
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 579
Grain size effect on magnetic and dielectric properties of barium hexaferrite (BHF)
- 1 February 2020
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 579
Grain size effect on magnetic and dielectric properties of barium hexaferrite (BHF)
- 1 December 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (12) , 1250a3
Effect of annealing temperature on morphology and magnetic properties of cobalt ferrite nanofibers
- 1 December 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (12) , 1250a3
Effect of annealing temperature on morphology and magnetic properties of cobalt ferrite nanofibers
- 31 October 2019
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 579, 411805
Crystal structure and magnetic properties study on ferromagnet Fe2MnSi0.75Al0.25 Heusler alloy
- 31 October 2019
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 579, 411805
Crystal structure and magnetic properties study on ferromagnet Fe2MnSi0.75Al0.25 Heusler alloy
- 29 October 2019
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 32 (4) , 045404
Nonstoichiometric charge defect induced relaxor antiferroelectric ordering in La modified Bi 0.5 (Na 0.80 K 0.20 ) 0.5 TiO 3 relaxor ferroelectric
The effect of A-site nonstoichiometric in La 3+ modified Bi 0.5 (Na 0.80 K 0.20 ) 0.5 TiO 3 /BNKT solid solution on crystal structure and electrical properties have been investigated. Evolution of crystal structure from rhombohedral ( R 3 c ) to tetragonal ( P 4 bm ) symmetry with reduction of the lattice distortion has been observed. The Raman spectra analysis is well supported to the crystal structure study from the XRD patterns analysis. The presence of charge defects due to non-stoichiometric composition and the reduction of oxygen vacancies have been confirmed by the x-ray photoelectron spectra (XPS) of the respective elements. The FESEM (field emission scanning electron microscopy) micrographs clearly show the reduction of grain size with the incorporation of La 3+ in A-site of BNKT. The multiple dielectric anomalies near depolarization temperature ( T d ) and temperature at maximum dielectric value ( T m ) in the temperature dependent dielectric curves ascribe the diffuse phase transition with relaxor ferroelectric nature. The dielectric anomalies at T d and T m become more pronounce with the increase in addition of La 3+ into BNKT lattice. The presence of charge defects with A-sites complexity leads to interrupt the long range polar ferroelectric domains and, forms the polar nanoregions (PNRs). The competition between ferroelectric R 3 c symmetry and non-polar P 4 bm symmetry with the addition of La 3+ into the BNKT lattice induces an intermediate modulated phase, which exhibits the antiferroelectric in nature having pinched ferroelectric hysteresis loop.
- 29 October 2019
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 32 (4) , 045404
Nonstoichiometric charge defect induced relaxor antiferroelectric ordering in La modified Bi 0.5 (Na 0.80 K 0.20 ) 0.5 TiO 3 relaxor ferroelectric
The effect of A-site nonstoichiometric in La 3+ modified Bi 0.5 (Na 0.80 K 0.20 ) 0.5 TiO 3 /BNKT solid solution on crystal structure and electrical properties have been investigated. Evolution of crystal structure from rhombohedral ( R 3 c ) to tetragonal ( P 4 bm ) symmetry with reduction of the lattice distortion has been observed. The Raman spectra analysis is well supported to the crystal structure study from the XRD patterns analysis. The presence of charge defects due to non-stoichiometric composition and the reduction of oxygen vacancies have been confirmed by the x-ray photoelectron spectra (XPS) of the respective elements. The FESEM (field emission scanning electron microscopy) micrographs clearly show the reduction of grain size with the incorporation of La 3+ in A-site of BNKT. The multiple dielectric anomalies near depolarization temperature ( T d ) and temperature at maximum dielectric value ( T m ) in the temperature dependent dielectric curves ascribe the diffuse phase transition with relaxor ferroelectric nature. The dielectric anomalies at T d and T m become more pronounce with the increase in addition of La 3+ into BNKT lattice. The presence of charge defects with A-sites complexity leads to interrupt the long range polar ferroelectric domains and, forms the polar nanoregions (PNRs). The competition between ferroelectric R 3 c symmetry and non-polar P 4 bm symmetry with the addition of La 3+ into the BNKT lattice induces an intermediate modulated phase, which exhibits the antiferroelectric in nature having pinched ferroelectric hysteresis loop.
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Compositional Fluctuation Induced Relaxor Antiferroelectric Ordering in La Modified (Bi0.5Na0.5)0.94Ba0.06TiO3: Effect of Polar Nanoregions
The La 3+ modified lead free Bi 0.5 Na 0.5 TiO 3- BaTiO 3 /BNBTO solid solutions near morphotropic phase boundary [((Bi 0.94 La 0.06 ) 0.5 Na 0.5 ) 0.94 Ba 0.06 TiO 3 /BLNBTO and ((Bi 0.5 Na 0.5 ) 0.94 Ba 0.06 ) 0.91 La 0.06 TiO 3 /BNBLTO] have been prepared by the high temperature solid state reaction method. The crystal structure of BLNBTO transfers from Rhombohedral (R3c) to pseudocubic symmetry (P4bm) with the anti-polar phase in BNBLTO, which is confirmed by the Rietveld refinement of the XRD patterns. The microstructural analysis of the samples has been carried out by the field emission electron microscopy. The temperature dependent dielectric permittivity shows the diffuse phase transition (DPT). The degree of DPT has been estimated by the modified Curie-Weiss law and, found to be 1.671 and 1.716 for BLNBTO and BNBLTO respectively. The compositional fluctuation induced relaxor antiferroelectric ordering has been confirmed by the ferroelectric hysteresis loops. The energy storage density of BNBLTO has been found to be 0.376 Jcm −3 . The present work provides the role of compositional engineering to tune the physical properties of the material for technological applications.
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Compositional Fluctuation Induced Relaxor Antiferroelectric Ordering in La Modified (Bi0.5Na0.5)0.94Ba0.06TiO3: Effect of Polar Nanoregions
The La 3+ modified lead free Bi 0.5 Na 0.5 TiO 3- BaTiO 3 /BNBTO solid solutions near morphotropic phase boundary [((Bi 0.94 La 0.06 ) 0.5 Na 0.5 ) 0.94 Ba 0.06 TiO 3 /BLNBTO and ((Bi 0.5 Na 0.5 ) 0.94 Ba 0.06 ) 0.91 La 0.06 TiO 3 /BNBLTO] have been prepared by the high temperature solid state reaction method. The crystal structure of BLNBTO transfers from Rhombohedral (R3c) to pseudocubic symmetry (P4bm) with the anti-polar phase in BNBLTO, which is confirmed by the Rietveld refinement of the XRD patterns. The microstructural analysis of the samples has been carried out by the field emission electron microscopy. The temperature dependent dielectric permittivity shows the diffuse phase transition (DPT). The degree of DPT has been estimated by the modified Curie-Weiss law and, found to be 1.671 and 1.716 for BLNBTO and BNBLTO respectively. The compositional fluctuation induced relaxor antiferroelectric ordering has been confirmed by the ferroelectric hysteresis loops. The energy storage density of BNBLTO has been found to be 0.376 Jcm −3 . The present work provides the role of compositional engineering to tune the physical properties of the material for technological applications.
- 21 August 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (10) , 105520
Sol-gel synthesis, crystalline phase, optical absorption, and photo-luminescence behavior of cerium-doped (Ba0.5Sr0.5)FeO3−δ powders
- 21 August 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (10) , 105520
Sol-gel synthesis, crystalline phase, optical absorption, and photo-luminescence behavior of cerium-doped (Ba0.5Sr0.5)FeO3−δ powders