XWXuesong Wu

Xuesong Wu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xuesong Wu has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Multirate Finite-Control-Set Motor Parameter-Free Predictive Control for SPMSM Drives

    by Xuesong Wu, Bowei Li, Cheng Xue, Yunwei (Ryan) Li

    Compared to conventional single-rate schemes, the multirate finite-control-set model predictive control (FCS-MPC) allows higher switching frequencies at relatively low sampling rates. However, multirate schemes exhibit increased sensitivity to parameter variations, particularly as the number of subcycles increases. Although motor parameter-free prediction techniques can partially mitigate this sensitivity, their effectiveness within a multirate framework remains constrained by control parameters and nonlinear factors. To address these challenges, this work proposes an improved multirate FCS motor parameter-free predictive control (FCS-MPFPC) scheme. First, an adaptive control-parameter-tuning approach based on Kalman filters is introduced, which utilizes current variation information to recursively estimate the impact of input voltage. Second, corrected voltage vectors accounting for dead-time effects are incorporated into both the prediction process and observers. Furthermore, rotor movement effects are compensated using second-order generalized integrators (SOGI) and Lagrange interpolation. Experimental results validate the proposed method, demonstrating improved performance under both nominal and mismatched parameter conditions.

  • Computationally Efficient Multirate Continuous Control Set Model Predictive Control With Fast Response for PMSM Drives

    by Xuesong Wu, Cheng Xue, Bowei Li, Yunwei Li

    Multirate continuous control set model predictive control (CCS-MPC) facilitates higher switching frequencies by simultaneously optimizing control actions across multiple sub-cycles. However, conventional schemes do not incorporate voltage constraints during the optimization process. Consequently, when the commanded voltage exceeds the converter's output capability, output scaling becomes necessary. This not only compromises the performance of the current sub-cycle, but also degrades the tracking accuracy of subsequent sub-cycles, inevitably impairing the system's dynamic performance. Moreover, high-dimensional matrix computations inherent to these schemes present substantial challenges for real-time implementation on cost-effective digital controllers. To overcome these limitations, this article proposes a computationally efficient multirate CCS-MPC scheme with integrated overmodulation capability. The entire tracking process of these sub-cycles is strategically divided into three stages–chasing, transition, and maintaining–each targeting specific control objectives. By doing so, the original large-scale optimization is decomposed into three smaller subproblems, significantly reducing computational complexity. Specifically, the chasing stage incorporates dynamic overmodulation designed based on the shortest feasible path of flux linkage tracking to ensure rapid dynamic response, while in the maintaining stage, the rotor-movement effect across sub-cycles is accounted for, enhancing steady-state performance. Ultimately, experimental results validate the effectiveness of the proposed approach, demonstrating a fivefold improvement in dynamic response and a 62.8% reduction in total execution time.


  • Double-Pulsing Reflected Wave Overvoltage Oscillation Suppression in Long-Cable VSI Motor Drives Induced by Narrow PWM Pulses

    by Cheng Xue, Xuesong Wu, Yunwei Li

    In the voltage source inverter (VSI)-fed motor drive system equipped with long cable connection, the differential reflected wave overvoltage (RW-OV) at ac motor terminals can typically reach a maximum of 2 per unit (p.u.) of the dc bus voltage when a single rising/falling switching is applied to an uncharged cable. However, under certain conditions, such as low-speed operation, the frequent narrow pulsewidth modulation (PWM) pulses will lead to the double-pulsing phenomenon, where the latest switching occurs while the voltage oscillation caused by the previous one has not fully decayed. This results in a differential RW-OV oscillation with an amplitude over 3 p.u., which challenges the insulation capability of the motor and aggravates high-frequency electromagnetic interference (EMI) issues. Unfortunately, most solutions merely resort to passive ways to avoid this issue, i.e., either directly abandoning narrow PWM pulses below a minimum dwell time or extending their duration to allow prior voltage oscillations to decay. Therefore, the line-to-line double-pulsing RW-OV in three-phase motor drives has been insufficiently researched. This article proposes a real-time duty-cycle-offset (RT-DCO) strategy that dynamically rotates which phase carries the maximum duty cycle and applies interleaved offsets to the other two phases, actively mitigating double-pulsing RW-OV behavior by leveraging residual oscillatory components to suppress subsequent voltage fluctuations while maximizing volt-second balance. Simulation and experimental results demonstrate the effectiveness of the proposed RT-DCO method in suppressing three-phase double-pulsing RW-OV oscillations.


  • Improved Model Predictive Control for Minimizing DC-Link Capacitor Current in Parallel Dual-Inverter-Fed PMSM Drives

    by Xuesong Wu, Cheng Xue, Bowei Li, Yunwei Li

    Reducing the root-mean-square (RMS) current through DC-link capacitors is critically challenging in parallel dual-inverter-fed drive systems, as DC-link currents are heavily influenced by circulating currents and operating points. To address the complication, an improved finite control set model predictive control (FCS-MPC) scheme is proposed in this work. Unlike existing research, the proposed scheme accounts for circulating currents and power-sharing online when estimating DC-link ripple currents, ensuring consistent performance across a wide range of operating conditions. Moreover, the evaluation of DC-link performance is conducted over an extended prediction horizon, providing a more accurate representation of DC-link ripple current fluctuations around its average. To alleviate the computational demands imposed by a large number of switching states, a multi-rate hybrid structure is introduced. Within this structure, stator currents tracking can remain unaffected by other objectives, maintaining superior torque and speed response. Furthermore, DC-link currents prediction is performed within flexible subsets, keeping the calculation burden modest and allowing for real time application. Ultimately, the proposed scheme can achieve a 13.5% to 41.3% reduction in DC-link RMS current compared to the state-of-the-art approach.


  • A Topology-Reconstructed Minimum-Current-Stress Modulation for a Single-Phase Isolated DC–AC Converter

    by Nie Hou, Xuesong Wu, Zhengqin Huang, Yunwei Li

    Isolated dc–ac converters, driven by their high-power density and efficiency, have become a compelling alternative for line-frequency transformer-based dc–ac converters in applications requiring isolation and bidirectional power flow. In this article, a single-phase isolated dc–ac converter is studied, and a modified topology-reconstructed minimum-current-stress (MCS) modulation is proposed for achieving high efficiency and superior power quality. This method discusses the topology reconstruction of the dc–ac converter and treats it as two dual-active-bridge (DAB) dc–dc converters, allowing the dc–ac converter to inherit the efficiency optimized methods of the DAB converter. Then, by combining the MCS modulation of the high-efficiency DAB converter, the modified topology-reconstructed MCS modulation is proposed for the single-phase isolated dc–ac converter. In addition, superior power quality can also be achieved by using the proposed method. Finally, a small-scale experimental platform is constructed to verify the effectiveness of the proposed topology-reconstructed modulation scheme for the single-phase isolated dc–ac converter.


  • Virtual Reduced-Order Model-Based Back EMF Estimation and Speed Sensorless Control for $LC$-Filtered PMSM Drives

    by Cheng Xue, Xuesong Wu, Yuzhuo Li, Yunwei Li

    The installment of the $LC$ filter at the inverter output side reshapes the sinusoidal input voltage for the motor terminal, thus, extending a longer motor lifetime. Despite this, achieving speed sensorless control remains essential for enhanced reliability and saved costs. Currently, there is limited research on the development of a speed sensorless control tailored to high-order drive scenarios due to the increased complexity and strong coupling of the system modeling, and the unaltered adoption of the prevailing general observer methodology demands a considerably large dimensional gain matrix to guarantee observability. To fill this important research gap, this article proposes a novel back-electromotive force (EMF) modeling for the permanent magnet synchronous machine drives based on the weighted current between the filter inductor current and motor stator current. This new approach converts the third-order $LCL$ model to the first-order $L$ case (virtual reduced-order modeling), which enables the estimation of back EMF without relying on voltage sensors. In addition, the observer designed based on the proposed virtual model not only removes the dependency on capacitor parameters but also reduces the size of the gain matrix. This further enhances the robustness of the back EMF estimation and simultaneously simplifies the design and computation of the observation algorithm. A Kalman filter observer for back EMF estimation is implemented as a case study to verify the proposed modeling. The efficacy of the proposed speed sensorless control is also evaluated under scenarios involving variations in filter and motor inductance.


  • Multirate FCS-MPC for Parallel Dual-Converter-Fed PMSM Drives With Reduced Circulating Currents

    by Xuesong Wu, Cheng Xue, Yunwei Li

    When implementing finite control set model predictive control (FCS-MPC) schemes in parallel converters sharing a common DC link, circulating currents become prominent due to the relatively low switching frequency. Although the multi-rate technique was proposed later to enhance the calculation efficiency, it is complex in parallel converters due to the numerous switching sates and strong coupling between control variables. This article presents a multi-rate FCS-MPC method for permanent magnet synchronous machine (PMSM) drives fed by parallel converters. Reduced circulating currents are achieved from two primary aspects. Firstly, the equivalent multi-level model of parallel converters is integrated with multi-rate structure. This fully utilizes the redundancy in switching states, simplifying the calculation and thus enables a higher equivalent control frequency. Secondly, the regulation of circulating currents is decoupled from the motor side variables, allowing for precise regulation of circulating current and easy design of cost functions. In contrast to conventional modulation-based schemes, the proposed scheme ensures superior stator current performance and fast dynamic response under all operating conditions. The effectiveness of the proposed method was validated through experiments.