Jakob Reichstein
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Jakob Reichstein has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Karl Mandel
Department of Chemistry and Pharmacy, Section Materials Chemistry, Chair of Particle-Based Materials Chemistry, Friedrich-Alexander-Universität Erlangen-Nürnberg, Egerlandstraße 1, 91058 Erlangen, Germany
9 shared publications - Susanne Wintzheimer
Department of Chemistry and Pharmacy, Inorganic Chemistry, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), Egerlandstraße 1, 91058 Erlangen, Germany
8 shared publications - Philipp Groppe
Department of Chemistry and Pharmacy, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), Egerlandstrase 1, 91058 Erlangen, Germany
4 shared publications Matthias Thommes
Institute of Separation Science and Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), Egerlandstraße 3, D-91058 Erlangen, Germany
3 shared publicationsMaximilian Oppmann
Fraunhofer Institute for Silicate Research ISC Neunerplatz 2 D97082 Würzburg Germany
3 shared publicationsSarah Wenderoth
Chair of Chemical Technology of Materials Synthesis Julius‐Maximilians‐University Würzburg Röntgenring 11 D97070 Würzburg Germany
3 shared publications
Latest Publications
- Open Access
- 6 May 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (45) , 5840-5843
Mesoporous supraparticles with a tailored solid–liquid–gas interface for visual indication of H 2 gas and NH 3 vapours
Dual-gasochromic supraparticles hosting a tailor-made solid–liquid–gas interface within their mesoporous framework are reported. They make hazardous H 2 gas and NH 3 vapours visible for the naked eye by undergoing rapid gas-specific colour changes.
- 6 May 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (45) , 5840-5843
Open AccessMesoporous supraparticles with a tailored solid–liquid–gas interface for visual indication of H 2 gas and NH 3 vapours
Dual-gasochromic supraparticles hosting a tailor-made solid–liquid–gas interface within their mesoporous framework are reported. They make hazardous H 2 gas and NH 3 vapours visible for the naked eye by undergoing rapid gas-specific colour changes.
- Open Access
Catalyst Supraparticles: Tuning the Structure of Spray‐Dried Pt/SiO2 Supraparticles via Salt‐Based Colloidal Manipulation to Control their Catalytic Performance
The structure of supraparticles (SPs) is a key parameter for achieving advanced functionalities arising from the combination of different nanoparticle (NP) types in one hierarchical entity. However, whenever a droplet‐assisted forced assembly approach is used, e.g., spray‐drying, the achievable structure is limited by the inherent drying phenomena of the method. In particular, mixed NP dispersions of differently sized colloids are heavily affected by segregation during the assembly. Herein, the influence of the colloidal arrangement of Pt and SiO2 NPs within a single supraparticulate entity is investigated. A salt‐based electrostatic manipulation approach of the utilized NPs is proposed to customize the structure of spray‐dried Pt/SiO2 SPs. By this, size‐dependent separation phenomena of NPs during solvent evaporation, that limit the catalytic performance in the reduction of 4‐nitrophenol, are overcome by achieving even Pt NP distribution. Additionally, the textural properties (pore size and distribution) of the SiO2 pore framework are altered to improve the mass transfer within the material leading to increased catalytic activity. The suggested strategy demonstrates a powerful, material‐independent, and universally applicable approach to deliberately customize the structure and functionality of multi‐component SP systems. This opens up new ways of colloidal material combinations and structural designs in droplet‐assisted forced assembly approaches like spray‐drying.
Open AccessCatalyst Supraparticles: Tuning the Structure of Spray‐Dried Pt/SiO2 Supraparticles via Salt‐Based Colloidal Manipulation to Control their Catalytic Performance
The structure of supraparticles (SPs) is a key parameter for achieving advanced functionalities arising from the combination of different nanoparticle (NP) types in one hierarchical entity. However, whenever a droplet‐assisted forced assembly approach is used, e.g., spray‐drying, the achievable structure is limited by the inherent drying phenomena of the method. In particular, mixed NP dispersions of differently sized colloids are heavily affected by segregation during the assembly. Herein, the influence of the colloidal arrangement of Pt and SiO2 NPs within a single supraparticulate entity is investigated. A salt‐based electrostatic manipulation approach of the utilized NPs is proposed to customize the structure of spray‐dried Pt/SiO2 SPs. By this, size‐dependent separation phenomena of NPs during solvent evaporation, that limit the catalytic performance in the reduction of 4‐nitrophenol, are overcome by achieving even Pt NP distribution. Additionally, the textural properties (pore size and distribution) of the SiO2 pore framework are altered to improve the mass transfer within the material leading to increased catalytic activity. The suggested strategy demonstrates a powerful, material‐independent, and universally applicable approach to deliberately customize the structure and functionality of multi‐component SP systems. This opens up new ways of colloidal material combinations and structural designs in droplet‐assisted forced assembly approaches like spray‐drying.
- Open Access
- 20 April 2024
- Published by Wiley in Advanced Materials Technologies
- Vol. 9 (17)
Safety Through Visibility: Tracing Hydrogen in Colors with Highly Customizable and Flexibly Applicable Supraparticle Additives
The flammability of H 2 ‐air mixtures demands timely detection and precise localization of H 2 leakages to ensure safety and targeted maintenance measures in the anticipated hydrogen economy. Herein, H 2 indicator supraparticles (SPs) are demonstrated that meet this demand by making H 2 visible to the naked eye by a rapid (ir)reversible color change. Their toolbox‐like manufacturing from SiO 2 nanoparticles (NPs), Pt NPs, and indicator dye molecules via spray‐drying allows for engineering their structure, texture, and detection performance by systematically tuning their composition. It is demonstrated that decreasing the SiO 2 NP size, increasing the Pt NP concentration, and adjusting the amount of dye molecules improve the SPs’ response times. This opens up the option for multidimensional customization of their detection performance. Furthermore, the toolbox of H 2 indicator SPs containing the established resazurin system is expanded to other indicator dyes, which makes a color change and reversibility of choice feasible. H 2 indicator SPs meet many of the target characteristics for H 2 detectors, e.g., low limit of detection, cycle stability, and high selectivity. Moreover, the SPs’ particulate nature allows for their flexible application as an additive, e.g., in coatings or clothing, which enables the detection and localization of H 2 leakages in relevant application scenarios.
- 20 April 2024
- Published by Wiley in Advanced Materials Technologies
- Vol. 9 (17)
Open AccessSafety Through Visibility: Tracing Hydrogen in Colors with Highly Customizable and Flexibly Applicable Supraparticle Additives
The flammability of H 2 ‐air mixtures demands timely detection and precise localization of H 2 leakages to ensure safety and targeted maintenance measures in the anticipated hydrogen economy. Herein, H 2 indicator supraparticles (SPs) are demonstrated that meet this demand by making H 2 visible to the naked eye by a rapid (ir)reversible color change. Their toolbox‐like manufacturing from SiO 2 nanoparticles (NPs), Pt NPs, and indicator dye molecules via spray‐drying allows for engineering their structure, texture, and detection performance by systematically tuning their composition. It is demonstrated that decreasing the SiO 2 NP size, increasing the Pt NP concentration, and adjusting the amount of dye molecules improve the SPs’ response times. This opens up the option for multidimensional customization of their detection performance. Furthermore, the toolbox of H 2 indicator SPs containing the established resazurin system is expanded to other indicator dyes, which makes a color change and reversibility of choice feasible. H 2 indicator SPs meet many of the target characteristics for H 2 detectors, e.g., low limit of detection, cycle stability, and high selectivity. Moreover, the SPs’ particulate nature allows for their flexible application as an additive, e.g., in coatings or clothing, which enables the detection and localization of H 2 leakages in relevant application scenarios.
- Open Access
- 12 April 2024
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 598
Influence of magnetic interactions in iron oxide nanoparticle polymer composites on magnetism and induction heating
- 12 April 2024
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 598
Open AccessInfluence of magnetic interactions in iron oxide nanoparticle polymer composites on magnetism and induction heating
- Open Access
- 8 April 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Catalyst Supraparticles: Tuning the Structure of Spray-dried Pt/SiO2 Supraparticles via Salt-based Colloidal Manipulation to Control their Catalytic Performance
The structure of supraparticles (SP) is a key parameter for achieving advanced functionalities arising from the combination of different nanoparticle (NP) types in one hierarchical entity. However, whenever a droplet-assisted forced assembly approach is used, e.g., spray-drying, the achievable structure is limited by the inherent drying phenomena of the method. Especially, mixed NP dispersions of differently-sized colloids are heavily affected by segregation during the assembly. Herein, the influence of the colloidal arrangement of Pt and SiO2 NPs within a single supraparticulate entity is investigated. A salt-based electrostatic manipulation approach of the utilized NPs is proposed to customize the structure of spray-dried Pt/SiO2 SPs. By this, size-dependent separation phenomena of NPs during solvent evaporation, that limit the catalytic performance in the reduction of 4-nitrophenol, are overcome by achieving even Pt NP distribution. Additionally, the textural properties (pore size and distribution) of the SiO2 pore framework are altered to improve the mass transfer within the material leading to increased catalytic activity. The suggested strategy demonstrates a powerful, material-independent, and universally applicable approach to deliberately customize the structure and functionality of multi-component SP systems. This opens up new ways of colloidal material combinations and structural designs in droplet-assisted forced assembly approaches like spray-drying.
- 8 April 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessCatalyst Supraparticles: Tuning the Structure of Spray-dried Pt/SiO2 Supraparticles via Salt-based Colloidal Manipulation to Control their Catalytic Performance
The structure of supraparticles (SP) is a key parameter for achieving advanced functionalities arising from the combination of different nanoparticle (NP) types in one hierarchical entity. However, whenever a droplet-assisted forced assembly approach is used, e.g., spray-drying, the achievable structure is limited by the inherent drying phenomena of the method. Especially, mixed NP dispersions of differently-sized colloids are heavily affected by segregation during the assembly. Herein, the influence of the colloidal arrangement of Pt and SiO2 NPs within a single supraparticulate entity is investigated. A salt-based electrostatic manipulation approach of the utilized NPs is proposed to customize the structure of spray-dried Pt/SiO2 SPs. By this, size-dependent separation phenomena of NPs during solvent evaporation, that limit the catalytic performance in the reduction of 4-nitrophenol, are overcome by achieving even Pt NP distribution. Additionally, the textural properties (pore size and distribution) of the SiO2 pore framework are altered to improve the mass transfer within the material leading to increased catalytic activity. The suggested strategy demonstrates a powerful, material-independent, and universally applicable approach to deliberately customize the structure and functionality of multi-component SP systems. This opens up new ways of colloidal material combinations and structural designs in droplet-assisted forced assembly approaches like spray-drying.
- Open Access
- 15 February 2024
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (18)
Modulating the Microenvironment of Coumarin Dyes within Multihierarchical Supraparticles: En Route toward Versatile Luminescent Dual‐Threshold Temperature Indicators with Ratiometric Readout
Temperature indicators trace (un)desired thermal impacts across their thermal history upon readout at every point of interest via defined irreversible signal changes. Ratiometric luminescent temperature indicators are attractive due to their fast, sensitive, contactless, spatially‐resolved, and self‐referenced readout. However, they have a limited working range as commonly only one specific temperature‐induced physicochemical effect is exploited. Herein, dual‐threshold temperature indicator supraparticles (SPs) are introduced that expand the working range of individual luminescent probes and enhance the extractable information on the thermal history. These SPs derive their functionality from the synergistic interplay of three spectrally distinguishable luminescent species assembled in one multihierarchical, micrometer‐sized particle of hybrid organic‐inorganic nature. This engineered nanostructure enables the stepwise modulation of the physicochemical microenvironment of two incorporated coumarin species at programmable threshold temperatures, resulting in distinct changes in their emission. As these changes are based on dye‐specific mechanisms that are induced in consecutive temperature regimes, the SPs achieve a scarcely reported broad working range (60–200 °C) with temperature‐dependent response times of minutes to seconds. From a broader perspective, the conceptualized SPs pioneer in how multiple individual luminescent probes with different excitation‐emission properties and indicator mechanisms are synergistically united in one advanced indicator system by precise material engineering.
- 15 February 2024
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (18)
Open AccessModulating the Microenvironment of Coumarin Dyes within Multihierarchical Supraparticles: En Route toward Versatile Luminescent Dual‐Threshold Temperature Indicators with Ratiometric Readout
Temperature indicators trace (un)desired thermal impacts across their thermal history upon readout at every point of interest via defined irreversible signal changes. Ratiometric luminescent temperature indicators are attractive due to their fast, sensitive, contactless, spatially‐resolved, and self‐referenced readout. However, they have a limited working range as commonly only one specific temperature‐induced physicochemical effect is exploited. Herein, dual‐threshold temperature indicator supraparticles (SPs) are introduced that expand the working range of individual luminescent probes and enhance the extractable information on the thermal history. These SPs derive their functionality from the synergistic interplay of three spectrally distinguishable luminescent species assembled in one multihierarchical, micrometer‐sized particle of hybrid organic‐inorganic nature. This engineered nanostructure enables the stepwise modulation of the physicochemical microenvironment of two incorporated coumarin species at programmable threshold temperatures, resulting in distinct changes in their emission. As these changes are based on dye‐specific mechanisms that are induced in consecutive temperature regimes, the SPs achieve a scarcely reported broad working range (60–200 °C) with temperature‐dependent response times of minutes to seconds. From a broader perspective, the conceptualized SPs pioneer in how multiple individual luminescent probes with different excitation‐emission properties and indicator mechanisms are synergistically united in one advanced indicator system by precise material engineering.
- 7 April 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 158 (13) , 134722
Supraparticles for naked-eye H2 indication and monitoring: Improving performance by variation of the catalyst nanoparticles
The recent transition to H2-based energy storage demands for reliable H2 sensors that allow for easy, fast, and reliable detection of leaks. Conventional H2 detectors are based on the H2 probes of changes of physical properties induced by subsurface H-atoms to a material, such as electrical conductivity. Herein, we report on highly reactive gasochromic H2 detectors based on the adsorption of H2 on the material surface. We prepared supraparticles (SPs) containing different types of noble metal nanoparticles (NPs), silica NPs, and the dye resazurin by spray‑drying and tested their performance for H2 detection. The material undergoes a distinct color change due to the hydrogenation of the purple resazurin to pink resorufin and, finally, colorless hydroresorufin. The step-wise transition is fast and visible to the naked eye. To improve further the performance of the sensor, we tested the reactivity of SPs with different catalytically active NPs by means of in situ DRIFTS. We show that choice of the NP catalyst has a pronounced effect on the response of the H2 indicator. In addition, we demonstrate that the performance depends on the size of the NPs. These effects are attributed to the availability of reactive H‑atoms on the NP surface. Among the materials studied, Pt-containing SPs gave the best results for H2 detection.
- 7 April 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 158 (13) , 134722
Supraparticles for naked-eye H2 indication and monitoring: Improving performance by variation of the catalyst nanoparticles
The recent transition to H2-based energy storage demands for reliable H2 sensors that allow for easy, fast, and reliable detection of leaks. Conventional H2 detectors are based on the H2 probes of changes of physical properties induced by subsurface H-atoms to a material, such as electrical conductivity. Herein, we report on highly reactive gasochromic H2 detectors based on the adsorption of H2 on the material surface. We prepared supraparticles (SPs) containing different types of noble metal nanoparticles (NPs), silica NPs, and the dye resazurin by spray‑drying and tested their performance for H2 detection. The material undergoes a distinct color change due to the hydrogenation of the purple resazurin to pink resorufin and, finally, colorless hydroresorufin. The step-wise transition is fast and visible to the naked eye. To improve further the performance of the sensor, we tested the reactivity of SPs with different catalytically active NPs by means of in situ DRIFTS. We show that choice of the NP catalyst has a pronounced effect on the response of the H2 indicator. In addition, we demonstrate that the performance depends on the size of the NPs. These effects are attributed to the availability of reactive H‑atoms on the NP surface. Among the materials studied, Pt-containing SPs gave the best results for H2 detection.
- Open Access
- 10 March 2021
- Published by Wiley in Advanced Functional Materials
- Vol. 31 (11) , 2170073
Supraparticles: Supraparticles for Sustainability (Adv. Funct. Mater. 11/2021)
- 10 March 2021
- Published by Wiley in Advanced Functional Materials
- Vol. 31 (11) , 2170073
Open AccessSupraparticles: Supraparticles for Sustainability (Adv. Funct. Mater. 11/2021)
- Open Access
- 7 May 2019
- Published by Wiley in Advanced Functional Materials
- Vol. 29 (19) , 1970129
Sensors: Expanding the Horizon of Mechanochromic Detection by Luminescent Shear Stress Sensor Supraparticles (Adv. Funct. Mater. 19/2019)
- 7 May 2019
- Published by Wiley in Advanced Functional Materials
- Vol. 29 (19) , 1970129
Open AccessSensors: Expanding the Horizon of Mechanochromic Detection by Luminescent Shear Stress Sensor Supraparticles (Adv. Funct. Mater. 19/2019)
- 7 March 2019
- Published by Wiley in Advanced Functional Materials
- Vol. 29 (19)
Expanding the Horizon of Mechanochromic Detection by Luminescent Shear Stress Sensor Supraparticles
Novel sensor particles have been developed that expand the variety of today's mechanochromic systems. The developed supraparticles consist of several different components to enable the sensor function. First, a luminescence‐quenching core material is coated with silica nanoparticles. Second, this structure is surrounded by raspberry‐like nanostructured silica particles, which host luminophore moieties. Upon shear stress, components spatially separated in the original supraparticles, namely quencher and luminophore components, come into contact. This causes an irreversible quenching of the luminescence (sensor turn‐off). Different options to select core, quencher, and luminophore components allow to drive the sensors to different sensing options regarding response time, sensitivity, and operation time. The sensors can be sensitive and rapid in response or generated to monitor the influence of shear stress over longer periods of time. Thus, a rapid, visible, “on‐the‐fly” sensing of shear stress is possible as well as monitoring the impact of prolonged shear stress. The particles are assembled by spray‐drying. This affords flexibility when choosing the type of quencher and luminophore moiety. As such, the sensitivity of this robust, particle‐based shear stress sensor system can be deliberately configured. Furthermore, the supraparticle sensor can be integrated in surfaces to create interactive, communicating materials.
- 7 March 2019
- Published by Wiley in Advanced Functional Materials
- Vol. 29 (19)
Expanding the Horizon of Mechanochromic Detection by Luminescent Shear Stress Sensor Supraparticles
Novel sensor particles have been developed that expand the variety of today's mechanochromic systems. The developed supraparticles consist of several different components to enable the sensor function. First, a luminescence‐quenching core material is coated with silica nanoparticles. Second, this structure is surrounded by raspberry‐like nanostructured silica particles, which host luminophore moieties. Upon shear stress, components spatially separated in the original supraparticles, namely quencher and luminophore components, come into contact. This causes an irreversible quenching of the luminescence (sensor turn‐off). Different options to select core, quencher, and luminophore components allow to drive the sensors to different sensing options regarding response time, sensitivity, and operation time. The sensors can be sensitive and rapid in response or generated to monitor the influence of shear stress over longer periods of time. Thus, a rapid, visible, “on‐the‐fly” sensing of shear stress is possible as well as monitoring the impact of prolonged shear stress. The particles are assembled by spray‐drying. This affords flexibility when choosing the type of quencher and luminophore moiety. As such, the sensitivity of this robust, particle‐based shear stress sensor system can be deliberately configured. Furthermore, the supraparticle sensor can be integrated in surfaces to create interactive, communicating materials.