LSLaura Schreiber

Laura Schreiber

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Laura Schreiber has a total of 434 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • LBCmos: extending wide-field imaging and photometry capabilities at LBTO to the next decades

    by Matteo Lombini, Michele Bellazzini, Emiliano Diolaiti, Fernando Pedichini, Andrea Baruffolo, Federico Battaini, Enrico Cascone, Fausto Cortecchia, Felice Cusano, Andrea Di Paola, et al.

    LBCmos is a proposed upgrade of the Large Binocular Camera at the Large Binocular Telescope Observatory, designed to ensure state-of-the-art wide-field imaging and photometric performance for the coming decades. Building on the long-term scientific impact and operational importance of LBC-Blue and LBC-Red, the project aims to replace the aging nitrogen-cooled CCD detector mosaics with two modern, monolithic Teledyne COSMOS-8K scientific CMOS cameras. The upgraded system preserves all current capabilities while introducing improvements, including shutterless operation, continuous focal-plane coverage, ultra-low readout noise, fast and flexible readout modes, simplified operations, and expanded scientific reach, all enabled by a new suite of narrow-tomedium-band filters. Optical simulations confirm that, by modifying off-the-shelf C8K cameras (replacing the flat entrance window with a suitable lens), the new instruments will maintain the excellent image quality and pixel scale of the current LBCs, ensuring Nyquist sampling even under the best seeing conditions. The adoption of sCMOS detectors enhances operational flexibility, enabling high-cadence photometry, real-time diagnostics, and fast exposures with negligible overhead. LBCmos also streamlines mechanical and electronic subsystems by removing obsolete components, improving system reliability, and easing maintenance. A new approach to collimation and image quality monitoring, based on real-time ellipticity analysis across the full field, offers a complementary diagnostic path to the existing FPIA procedure. The LBCmos concept has been approved by the LBTO Board as a new instrument upgrade, marking the transition from conceptual design to implementation planning. The project is currently entering a phase focused on securing funding and finalizing key technical components. The baseline design and performance estimates presented here are based on representative detector solutions, while the final hardware configuration will be defined during the next development phase. LBCmos leverages mature, high-TRL technologies, positioning LBTO as one of the leading northern-hemisphere facilities for wide-field optical imaging. As one of only two wide-field imagers on 8–10 m northern hemisphere telescopes, this upgrade is critical for maintaining community access and enabling high-impact science.

  • Open Access

    Non-common path aberration compensation and a dark hole loop with a pyramid adaptive optics system: Application to SAXO+

    by C. Goulas, R. Galicher, F. Vidal, J. Mazoyer, F. Ferreira, A. Sevin, A. Potier, A. Boccaletti, E. Gendron, C. Béchet, et al.

    Context . In ground-based high-contrast instruments, residual aberrations known as non-common path aberrations (NCPAs) limit detection performance, as they are unseen by the adaptive optics (AO) wavefront sensor but impact the astrophysical image, creating quasi-static speckles. SAXO+, the upgrade of the SAXO (SPHERE AO system) includes a second loop of AO downstream of the SAXO loop. This second loop is equipped with a near-infrared pyramid wavefront sensor whose nonlinearities, usually described with modal optical gains, might be challenging for removing quasi-static speckles. Aims . We investigated two methods of quasi-static speckle removal: NCPA compensation and a dark hole loop, behind a pyramid AO system, measuring the interest of compensating for the pyramid optical gains. Methods . We performed end-to-end numerical simulations of SAXO+ under various astrophysical conditions (seeing, star magnitude). We offset the pyramid wavefront sensor operating point to apply both the speckle suppression methods, calibrating or not calibrating the optical gains. We evaluated their performance by measuring the residual starlight in the coronagraph image. Results . A by-product of our study is an on-sky calibration method of measuring the pyramid optical gains. Non-common path aberration compensation reduces the residual starlight in the coronagraph image by a factor of up to 20 for seeing between 0.7" and 1" for a bright star and a factor of 2 at 0.7" for a faint star. Optical gains compensation enhances the performance at poor seeing and small pyramid modulation radius with a bright star, but shows a useless or even negative impact due to estimation inaccuracies at faint targets. On the other hand, the dark hole loop reduces the residual starlight by a factor of up to 200. The optical gain calibration enhances the dark hole performance behind a single pyramid AO system but is useless behind the SAXO+ system. Our parametric study gives baseline values for the efficient control of the dark hole loop for the SAXO+ system.


  • Open Access

    The TANDEM Project as a Pilot Case for Wide-field Telescope Arrays

    by A. Buzzoni, A. Carbognani, R. Di Luca, E. Diolaiti, R. Gualandi, A. Semola, G. M. Stirpe, F. Bonoli, I. Bruni, F. Cortecchia, et al.

    We give here an account of the Telescope Array eNabling DEbris Monitoring (TANDEM) project, an innovative concept aimed at flanking, on a shared piggyback mount, the main G. D. Cassini 152 cm f/8 telescope at the INAF-OAS observing premises in Loiano, Italy. The system is especially intended for space situational awareness activities related to the study of asteroids and comets and on the astrodynamical characterization of circumterrestrial space debris and artificial satellites. TANDEM consists of a combination of four customized and independently steerable 35 cm f/3 Newtonian telescopes, each equipped with a Moravian C4-16000 camera, observing through the BVRcIc filters of the Johnson–Cousins system. The camera carries on board a GSense 4040 (4096 × 4096 pixels) monochrome CMOS detector with an electronic shutter and a 9 μm pixel size. A corrected field of view of 2° × 2° is offered by each telescope, though quite special pointing capabilities and observing modes are available for the telescope array, such as to cover up to 16 deg2 across sparse celestial fields, each up to 20° in separation. While especially conceived for observing activities in the framework of the European Consortium for Space Surveillance and Tracking, TANDEM may also find additional applications in a more direct astronomical context, as we briefly outline along this review.


  • Open Access

    Performance and limitations of using ELT and MCAO for 50 μas astrometry

    by Gabriele Rodeghiero, Carmelo Arcidiacono, Jörg-Uwe Pott, Saavidra Perera, Giorgio M. Pariani, Demetrio Magrin, Hannes Riechert, Martin Glück, Eric Gendron, Davide Massari, et al.

    Astrometry is a technically demanding observation mode similar to optical interferometry. Building on the legacy of astrometric space-based missions, such as Hipparcos,1 Gaia,2 and Hubble Space Telescope (HST),3,4 which have revolutionized the measurement of stellar position, proper motion, and distance, now the new generation of extremely large telescopes, the Extremely Large Telescope (ELT),5 the Thirty Meter Telescope,6 and the Giant Magellan Telescope,7 will push the scientific application of relative astrometry from the ground. The ELT will provide extreme sensitivity and diffraction-limited performances, which drive the achievable astrometric precision, over fields arc min scale. The unprecedented depth and resolution of ELT’s astrometric observations will enable the investigation of science cases of paramount importance for astronomy, such as the galactic super-massive black hole,8 the intermediate-mass black holes in globular clusters,9 or the properties of dark matter in dwarf galaxies.10,11 Although the ELT is designed and built with the requirement to reach the diffraction limit, its first light instrument MICADO is designed to deliver images of astrometric quality at least in the H and K bands where the first generation adaptive optics (AO) systems will deliver the best Strehls (up to 70% in SCAO mode in K band). MAORY is the star-oriented Multi-conjugated adaptive optics (MCAO) system for the ELT and it is equipped with one or two postfocal deformable mirrors (PFDMs), three natural guide stars (NGS), and six laser guide stars (LGS) for the wavefront sensing and the tomographic reconstruction.12 The relay provides a one-to-one image of the ELT focal plane at an accessible position for MICADO and a second future instrument. MICADO’s top-level requirement is to achieve star-to-star relative distance measurements to an accuracy of at least 50  μas over the central 20 arc sec field of view (FoV). Although the design of the instrument contributes to this requirement by a combination of low-distortion optical design and optomechanical stability (hence calibrateability), the best relative astrometric performance in the range of 20 to 50  μas will only be achieved in fields that provide a sufficient number of well-measured stars. This constraint is typically fulfilled for galactic targets and some extragalactic targets nearby (see discussion in Ref. 13) and is well known from previous relative astrometric mission, both space- and ground-based. In particular, large ground-based astrometry relies on low-order astrometric (plate-scale) calibration via reference stars since atmospheric refraction and telescope alignment are never perfectly stable at the required precision levels. Typically, the astrometric requirement is more than 100 times smaller than the diffraction limit, which renders any effort to actively control the astrometric stability in real-time very difficult. Since technically an astrometric distance measurement is equivalent to calibrating and knowing the plate-scale of the image, the astrometric precision is best expressed as relative precision, i.e., 50  μas precision/5 arc sec distances. This 10−5 level is the central astrometric requirement of the MICADO development for arcsec scale star-to-star distances and is derived from astrometric science cases such as kinematic estimation of the central dark mass in star clusters and nuclei of nearby galaxies. There is no perfect machine to perform astrometry. On the one hand, space telescopes profit from an extremely stable environment where to operate, their collecting area is limited. However, on the other hand, the large apertures of the next generation of ELTs will boost the sensitivity of the observations (∼D3) and the astrometric precision (σ∼FWHMSNR), but they will be continuously immersed in a changing, perturbing environment. Some of the perturbations affect the telescope with a variable but repeatable amplitude such as gravity, whereas some others such as the wind and temperature influence the system in a random way. The size of future instruments requires their installation at the Nasmyth platform in a gravity invariant configuration that maximizes their optomechanical stability. Using the system ELT-MAORY-MICADO as a representative test-bench of the ELTs astrometric instruments generation, the optomechanics follows a thread of increasing stability moving from the telescope (class 40 m) to the MCAO module (class 8 m) and the instrument (class 3 m). The telescope-born distortions are characterized by low-order terms; the warm MAORY optics have larger distortions (with respect to the ELT) but higher optomechanical stability, whereas the cold MICADO optics have even higher distortions due to the magnifying optics, but extreme stability. For instruments such as MICADO14 and IRIS,15 the common figure of merit for the relative astrometry at single- and multi-epoch observations is 50  μas in the near-infrared (NIR) for sources ∼1 as apart. The origin and fundamental limits of achieving 50  μas-level astrometry with the ELT/MICADO was discussed by Pott et al.16 Generally, NIR refers to a wavelength range of 0.8 to 2.4  μm where typically higher AO performances (and boosted astrometry) are achieved at the red side of this range (H-K band). The ≃50  μas precision is intended as postfit, differential astrometry after having applied third to fifth or higher order polynomials that fit and remove the distortion pattern induced by the instrument to the image. Among the different polynomial bases, the commonly used are the Cartesian13 and Chebyshev17 polynomials. The current astrometric noise floor for instruments as NIRC2 at Keck and WFC3 on HST is ∼0.15  mas;18 GeMS, a Cassegrain-focus, MCAO assisted instrument, shows residuals errors at ∼0.4  mas 17,19 that could be due to a variable gravity torque of the instrument at the telescope. MICADO is targeted to be the synthesis of the best characteristics of the previous astrometric imagers in terms of optomechanical stability located at the Nasmyth focus and the sensitivity gain from the ELT. Although the instrument design is astrometry oriented14 and it provides an imaging channel with no moving parts to ensure the highest stability, several systematics notch the astrometric precision at different levels. The astrometric error budget takes into account the nominal distortion by design, the as-built manufacturing residuals, the tolerances, and the AO corrections. Particular attention should be paid to understanding the distortion effects due to the mid-spatial frequencies (MSF) coming from the manufacturing residuals and the quasistatic aberrations that can be partially absorbed by the deformable mirrors (DMs) of the MCAO system. In this paper, we investigate the limit to the aberrations correctability due to the wavefront sensing sampling, the DMs finite number of actuators, and the different conjugation heights of the optics with respect to the atmospheric turbulence layers in which the DMs are conjugated. Excluding the astronomical-borne errors discussed by Trippe,20 the telescope and instrument-based errors constitute a significant fraction of the astrometric error budget analyzed in this work. A detailed analytical work by Ellerbroek21 has proposed a Fourier domain approach, in which the errors on the optical surfaces are modeled as phase screens with stationary statistics at one or several conjugate ranges from the optical system pupil. The work considers three classes of errors affecting the astrometric observations, namely the quasistatic surface errors, which change between observations; the so-called beam wander errors that make the beamprint move onto the optics; and the calibration and under-sampling errors. The current work assesses the same classes of errors as Ellebroek21 with a numerical approach based on a combination of a ray tracing model (Zemax) and a numerical AO simulator (MAO22). Although the analytical treatment provides a generalized approach applicable to any optical system, our numerical analysis specifically applies to the system ELT + MAORY + MICADO. However, the current analysis digs deeper into the manufacturing residual patterns leading to the mid-spatial frequency errors (MSFE) and carries out an end-to-end simulation of the AO loop in response to them. This paper deals with the astrometric errors generated inside the ELT and MAORY. It does not cover the MICADO contributions that belong to the non-common-path-aberrations (NCPAs) and are therefore not correctable by the AO system. This paper starts with the introduction of the concepts of conjugation height and optics correctability (Sec. 2). While dealing with the instrumental errors, particular care is given to the description of the quasistatic low-order aberrations and plate scale (PS) drifts (Sec. 3) and the MSF as it is a major challenge to the astrometric observations (Sec. 4). Section 5 describes the workflow and the methodology used for a simplified case study for the ELT and its MCAO system. The results are presented in Sec. 6.


  • Deep into the core of dense star clusters: an astrometric and photometric test case for ELT

    by G Fiorentino, M Bellazzini, M Spera, N B Sabha, M Mapelli, L Schreiber, M Dall’oRa, L Inno, M Patti, V F Braga, et al.

    We present a novel analysis of a young star cluster in the Large Magellanic cloud, R136-like, as seen by the Extremely Large Telescope (ELT). The main aim of this study is to quantify precision and accuracy of stellar proper motion measurements in crowded field when using an ELT working at its diffraction limit. This can serve as a reference study for future development of ELT scientific cases. In particular, we investigate our future ability to detect the dynamical signature of intermediate-mass black holes (IMBHs) with mass ∼104 M⊙ through detailed measurements of stellar proper motions. We have simulated two N-body dynamical cluster models with and without an IMBH. For each model, we have chosen two snapshots temporally spaced by 5 yr. Stellar fluxes in IJHK filters and star positions have been used to create ELT mock images for both single- and multiconjugate adaptive optics observing modes following the requierements given by ESO technical specifications for the first light imager. These images have been analysed using a classical software for seeing-limited data reduction, daophot/allstar. We make accurate photometry till the very faint pre-main-sequence stars, i.e. depending on the adaptive optics (AO) mode, magnitudes down to K ∼ 24 mag (single-conjugate AO) or K ∼ 22 mag (multiconjugate AO) in a total integration time of 20 min on target. Although daophot suite of programs is not devoted to precise astrometry, the astrometric accuracy is impressive, reaching few μas yr−1 or km s−1. In these assumptions, we are able to detect the IMBH signature at the centre of the cluster.


  • Numerical simulations of MAORY MCAO module for the ELT

    by Carmelo Arcidiacono, Sylvain Oberti, Laura Schreiber, Giovanni Bregoli, Christophe Verinaud, Giuseppe Cosentino, Emiliano Diolaiti, Guido Agapito, Alfio T. Puglisi, Marco Xompero, et al.

    MAO (MAORY Adaptive Optics) is the a developed numerical simulation tool for adaptive optics. It was created especially to simulate the performance of the MAORY MCAO module of the Extremely Large Telescope. It is a full end-to-end Monte-Carlo code able to perform different flavors of adaptive optics simulation. We used it to investigate the performance of a the MAORY and some specific issue related to calibration, acquisition and operation strategies. As, MAORY, MAO will implement Multi-conjugate Adaptive Optics combining Laser Guide Stars (LGS) and Natural Guide Stars (NGS) measurements. The implementation of the reference truth WFS completes the scheme. The simulation tool implements the various aspect of the MAORY in an end to end fashion. The code has been developed using IDL and use libraries in C++ and CUDA for efficiency improvements. Here we recall the code architecture, we describe the modeled instrument components and the control strategies implemented in the code.


  • MAORY real-time computer preliminary design

    by Carmelo Arcidiacono, Andrea Baruffolo, Giovanni Bregoli, Enrico Cascone, Giuseppe Cosentino, Paolo Ciliegi, Emiliano Diolaiti, Michele Bellazzini, Simone Esposito, Italo Foppiani, et al.

    MAORY is the Multi-conjugate Adaptive Optics module for the Extremely Large Telescope and it will be located on the Nasmyth platform of the telescope to feed scientific instruments. MAORY will re-image the telescope focal plane providing multi-conjugate adaptive optics correction of the wavefront distortion induced by the atmosphere. The system is based on six laser guide stars and three natural guide stars for sensing the wavefront distortion and three deformable mirrors for correcting it. We will show the current status of the preliminary design of the Real Time Computer in charge of carrying out all the calculations based on the measurements of the guide stars wavefront sensors. The hard real time (primary) loops are in charge of controlling the deformable mirrors and the lasers jitter compensation while the soft real- time (secondary) loops are in charge of updating the primary loops parameters as well as measuring or estimating the atmospheric parameters and the system performance. Telemetry data management/recording and calibration are the other tasks carried out by the real time computer.


  • MAORY for ELT: preliminary design overview

    by Emiliano Diolaiti, Paolo Ciliegi, Renata Abicca, Guido Agapito, Carmelo Arcidiacono, Andrea Baruffolo, Michele Bellazzini, Marco Bonaglia, Giovanni Bregoli, Olivier Brissaud, et al.

    MAORY is one of the approved instruments for the European Extremely Large Telescope. It is an adaptive optics module, enabling high-angular resolution observations in the near infrared by real-time compensation of the wavefront distortions due to atmospheric turbulence and other disturbances such as wind action on the telescope. An overview of the instrument design is given in this paper.


  • MAORY requirements flow down and technical budgets

    by Fausto Cortecchia, Lorenzo Busoni, Carmelo Arcidiacono, Mauro Patti, Laura Schreiber, Matteo Lombini, Eric Stadler, Emiliano Diolaiti, Paolo Ciliegi, Philippe Feautrier, et al.

    MAORY is the ELT-MCAO system providing first-light wide-field correction for the near infrared imager and spectrograph MICADO. This paper provides an overview of the systems engineering processes and tools implemented to MAORY project during preliminary design phase and it illustrates, with some practical examples, the role of MAORY technical budgets to derive requirements on subsystems. One of the critical activities in systems engineering is the requirements managing. In line with this, the MAORY team devotes a significant effort to this activity, which follows a well-established process. This involves the MAORY requirements break-down to subsystems level and from here down to subsystems procurements specifications. This paper also presents an overview of the MAORY Technical Budgets. One task of the System Engineering is to manage the technical budgets at system level combining the contributors at subsystems level to meet the overall requirements.


  • The MAORY laser guide star wavefront sensor: design status

    by Philippe Feautrier, Eric Stadler, Patrick Rabou, Jean-Jacques Correia, Sylvain Rochat, Laurent Jocou, Laurence Gluck, Emiliano Diolaiti, Carmelo Arcidiacono, Fausto Cortecchia, et al.

    MAORY will be the multi-adaptive optics module feeding the high resolution camera and spectrograph MICADO at the Extremely Large Telescope (ELT) first light. In order to ensure high and homogeneous image quality over the MICADO field of view and high sky coverage, the baseline is to operate wavefront sensing using six Sodium Laser Guide Stars. The Laser Guide Star Wavefront Sensor (LGS WFS) is the MAORY sub-system devoted to real-time measurement of the high order wavefront distortions. In this paper we describe the MAORY LGS WFS current design, including opto-mechanics, trade-offs and possible future improvements.