PGPramod Ghimire

Pramod Ghimire

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pramod Ghimire has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Operational Efficiency and Emissions Assessment of Ship Hybrid Power Systems With Battery; Effect of Control Strategies

    by Pramod Ghimire, Mehdi Zadeh, Shyam Thapa, Jarle Thorstensen, Eilif Pedersen

    This paper thoroughly evaluates battery hybridization in terms of operational energy efficiency and emissions with the effect of control design, mainly load-sharing control strategies. First, a methodology is developed to estimate fuel consumption with input from load profile and control parameters. It is further used to evaluate fuel saving potential in hybrid power systems compared to conventional power systems with three different high-level hybrid control strategies (HCS). For comprehensive benchmarking, case studies are performed on four different ship types: cruise ship, RoPax ferry, bulk carrier, and container ship. The results show that fuel saving highly depends on the implemented control strategies as the first strategy saves 6.9-8.8% fuel, the second saves 3.8-8.5%, whereas the third strategy saves -0.9-1.8%; highlighting the need for proper control strategy selection. Further, based on the ship types, the cruise ship shows highest fuel saving potential through hybridization, whereas the container ship shows the least saving potential. Moreover, implementation of the proposed battery sizing in the power systems shows a potential to reduce the number of installed generator sets in all the ship types. Further, a brief techno-economic analysis of the proposed lithium-ion battery and diesel generator (DG) shows that both the weight and space required for battery system are less than the DG counterpart, making it appropriate for the new builds and the retrofits. In this case, the battery can supply nearly equal power as the generator, but only for almost an hour, yet making substantial fuel savings.


  • Open Access

    Model-based efficiency and emissions evaluation of a marine hybrid power system with load profile

    by Pramod Ghimire, Siamak Karimi, Mehdi Zadeh, Krishna Kumar Nagalingam, Eilif Pedersen


  • Open Access

    Data-Driven Efficiency Modeling and Analysis of All-Electric Ship Powertrain: A Comparison of Power System Architectures

    by Pramod Ghimire, Mehdi Zadeh, Jarle Thorstensen, Eilif Pedersen

    In this article, a data-driven dynamic efficiency model is developed for efficiency evaluation and comparison of ship electric powertrain with various system configurations. Based on the proposed method, the entire powertrain efficiency is assessed from the fuel consumption to the propulsion unit and the rest of the onboard load. The efficiency model is repeated for the conventional diesel electric and the hybrid power system with batteries. In the latter case, the efficiency of the battery system is also included in the model. Then, the analysis is extended for different power system architectures such as AC and DC onboard power systems. As a case study, system efficiency in a cruise ship is investigated using a real operational profile. A comprehensive analysis is performed to demonstrate the loss distribution in each subsystem of a hybrid AC and DC power system. For a fair comparison between AC and DC, the battery charge level is equalized based on fuel compensation. The case study shows that hybridizing the ship power system increases system efficiency and enhances operational flexibility for the studied use case vessel. Furthermore, the DC hybrid power system can improve the efficiency of the whole ship powertrain due to the variable-speed operation of engines.


  • Dynamic Modeling, Simulation, and Testing of a Marine DC Hybrid Power System

    by Pramod Ghimire, Mehdi Zadeh, Eilif Pedersen, Jarle Thorstensen

    The hybridization of power systems offers the low-emission and energy-efficient marine vessels. However, it increases the complexity of the power system. Design, analysis, control, and optimization of such a sophisticated system require reliable and efficient modeling tools to cover a wide range of applications. In this work, a typical DC hybrid power system model is developed using a bond graph modeling approach. Necessary component models of varying degrees of fidelity are developed and integrated to build a system model with reasonable accuracy. The developed system model, along with the rule-based energy management system, is used to simulate the entire system and to investigate the load-sharing strategies as well as the system stability in various operating scenarios. Moreover, the simulation results are validated with experimental results conducted on a full-scale laboratory setup of DC hybrid power system and with a ship load profile. The results show that the system model is capable of capturing the fundamental dynamics of the real system. The hybrid power system model is further used to analyze the bus voltage deviation from its nominal value. The computational efficiency presented by the system is fairly good as it can simulate faster than real-time. The developed system model can be used to build up a comprehensive simulation platform for different system analysis and control designs.


  • Dynamic Modeling and Real-Time Simulation of a Ship Hybrid Power System Using a Mixed-Modeling Approach

    by Pramod Ghimire, Namireddy Praveen Reddy, Mehdi Karabalaye Zadeh, Eilif Pedersen, Jarle Thorstensen

    The electrification of a ship power-train is growing at a fast pace to improve efficiency and reduce emissions. The implementation of new technologies requires test and validation using various modeling approaches. However, many of the existing models of the ship hybrid power system are too complicated and demand high computational requirements, which make them inappropriate for the real-time applications. The real-time simulation model offers the benefits of testing different control algorithms along with hardware-in-the-loop testing. The bond graph-based dynamic modeling of a ship hybrid power system with a DC grid is presented as applicable to real-time simulation. The overall system model is established using different component models with varying fidelity, so-called mixed-modeling approach. In this approach, the components and control functions are modeled with different complexity such that it can capture the necessary system dynamics while minimizing the computational time. Results show that the modeled system is capable of simulating different operating strategies of the hybrid power system. Moreover, the mixed-modeling approach has enabled the system to simulate in nearly 2.5 times faster than the real-time.


  • Shipboard Electric Power Conversion: System Architecture, Applications, Control, and Challenges [Technology Leaders]

    by Pramod Ghimire, Daeseong Park, Mehdi Karbalaye Zadeh, Jarle Thorstensen, Eilif Pedersen

    The electrical power system in ships can be traced to the 1880s, when lightbulbs were installed on SS Columbia. Since then, electricity has been a crucial part of marine vessels. Research and development initiatives resulted in innovations including the ac motor and transformer, turboelectric power, submarines, dieselelectric propulsion, modern solidstate power electronics, the use of liquified natural gas (LNG) as fuel, and pure electric and hybrid ferries with pluggedin and wireless charging from shore.


  • Open Access

    Multivariate Data Analysis for Parameters Effect on CO2 Removal Efficiency

    by Udara Sampath P.R.ARachchige, Neelakantha Aryal, Pramod Ghimire, Maths Halstensen, Morten Christian Melaaen