Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Marco Zucca has a total of 92 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Rubberized Geopolymer Concrete for Sustainable Construction: A Critical Review of Interface Engineering, Performance Trade-Offs, Durability, and Environmental Impacts

    by Labani Nandi, Arnas Majumder, Biman Mukherjee, T. Senthil Vadivel, Marco Zucca, Flavio Stochino

    The use of Rubberized Geopolymer Concrete (RGC) represents a sustainable solution that can reduce reliance on Portland cement and make use of the potential uses of waste-tire rubber in construction. This review paper critically evaluates the constituent materials, design parameters, rubber pretreatment, fresh and hardened properties, durability, microstructure, and performance-enhancement measures of RGC. It is found that higher content of rubber usually lowers the workability, density, compressive strength, and elastic modulus owing to the flexible nature of the rubber and poor interface bonding between rubber and geopolymer matrix. However, a suitable content of rubber can improve the deformability, toughness, shock-absorption capacity, vibration damping, and thermo-acoustic properties. Surface treatment and matrix modifications can improve the interface transition zone and partially minimize mechanical strength loss but the efficiency of the technique varies based on rubber content, precursor mixture, activator chemistry, and curing conditions. Some of the major future research gaps are a standardization of design and testing procedures, durability and structural scale validation, and life-cycle and techno-economic analysis. In future research, it should be considered to use multi-criteria optimization for improving the strength, ductility, durability, environmental impact, cost, and constructability of RGC.

  • Open Access

    A Seismic Assessment Approach for Historical Masonry Aggregates

    by Marco Zucca, Pietro Crespi, Manuela Scamardo, Elisa Pilia

    The seismic assessment of historical masonry aggregates is particularly challenging as their present configuration typically reflects a complex construction history involving geometrical irregularities, heterogeneous structural systems, and mechanical interaction among adjacent buildings. In this context, an accurate reconstruction of the three-dimensional geometry of the aggregate is a fundamental step, since differences in height, wall configuration, floor levels, openings, and structural continuity may directly influence the global dynamic behavior. This study investigates the San Filippo Neri historical masonry aggregate through an integrated geometrical and structural modelling strategy. The geometry of the aggregate is reconstructed from the available architectural and survey documentation, including plans, sections, elevations, and photographic information, with particular attention to wall thickness variations, openings, horizontal structures, roofs, and masonry vaults. The reconstructed geometry then serves as the basis for a three-dimensional finite element model of the entire aggregate. Global modal analysis is then performed to identify the portions of the block which exhibit a distinguishable dynamic behavior. Two selected portions are subsequently analyzed independently, and their modal properties are compared with those obtained from the full aggregate model. Good agreement is found in terms of dominant vibration periods and mode shapes, supporting their interpretation as approximately independent structural units. A representative regular building located within one of these portions, Palazzo Jenca, is then modeled through the equivalent-frame approach and subjected to nonlinear static analysis. The N2 pushover procedure is used to derive a structure-specific behavior factor, which is subsequently employed in the linear dynamic assessment of the complete aggregate. The results highlight the close relationship between geometrical configuration and dynamic interaction within historical building aggregates. They further show that geometrical reconstruction and global modal behavior can jointly provide a mechanically informed basis for defining structural units in seismic assessment.

  • Structural Performance of Steel–Concrete Composite Slabs Incorporating Recycled Concrete Aggregates

    by Flavio Stochino, Marta Saccone, Alireza Alibeigibeni, Marco Zucca, Monica Valdes, Giovanna Concu, Marco Simoncelli, Marco Andrea Pisani, Claudio Bernuzzi

  • Open Access

    A Layer-Based CAD-to-FEM Workflow for Seismic Assessment of Existing Reinforced Concrete Bridges

    by Marco Zucca, Elisa Pilia, Pietro Crespi

    The numerical modelling of existing reinforced concrete (RC) bridges represents one of the most time-consuming and operator-dependent phases of seismic vulnerability assessment. Although advanced nonlinear analysis procedures are widely available, the generation of finite element (FE) models is still commonly performed through manual operations, limiting modelling efficiency, repeatability, and interoperability between design and analysis environments. This paper presents a layer-based CAD-to-FEM workflow for the structured generation of simplified FE models of existing RC bridges. The proposed methodology uses a standardized layer-based CAD organization and direct DXF interoperability with MIDAS Civil to transfer a centroidal representation of the bridge into a simplified beam-based finite element model. The centroidal axes of the bridge components are extracted from the original engineering drawings and classified into dedicated structural layers, providing a structured basis for subsequent FE model generation. The proposed workflow is designed to reduce manual preprocessing operations and improve modelling consistency by organizing the structural geometry through standardized CAD layers, thereby facilitating the generation of analysis-ready models for seismic assessment. The workflow is integrated with a Multi-Modal Pushover Analysis (MPA) procedure to evaluate the seismic vulnerability of bridges characterized by multiple significant vibration modes. A case study involving an existing Italian RC bridge demonstrates the feasibility of using the proposed simplified modelling strategy within a multi-modal nonlinear seismic assessment, including the evaluation of both ductile and brittle collapse mechanisms through seismic risk indices. The proposed workflow provides a structured framework for integrating conventional engineering drawings with nonlinear seismic assessment procedures.

  • Open Access

    Effect of Obstacle Porosity and Spatial Arrangement on Vented Dust Explosions: A CFD Comparison of Rack and Pallet Configurations

    by Francesco Pinna, Marco Zucca, Marco Simonceli, Flavio Stochino

    Internal congestion can significantly affect the severity of vented Dust Explosions, although obstacle porosity is often considered without explicitly accounting for the spatial distribution of the obstructed volume. This study numerically investigates how obstacle porosity and spatial arrangement jointly influence pressure development and flame propagation within a vented enclosure. The analysis was performed using a previously calibrated FLACS-CFD DustEx modelling framework, benchmarked against experimental dust-explosion data for the same enclosure configuration. Fifteen transient simulations were conducted for a 4.6×4.6×3.0" " m enclosure containing a centrally ignited maize-starch cloud and a 2.4×2.4" " m permanent vent. An unobstructed configuration was compared with two storage layouts: two continuous rack-like regions and twelve discrete palletized regions. Both layouts had the same gross obstacle volume of 20.64" " m^3, while porosity was varied from 0 to 0.9. The unobstructed enclosure produced a peak monitored overpressure of 0.341 bar(g). Within the porous range 0.4≤ϕ≤0.9, overpressure increased from 0.325 to 0.493 bar(g) for the rack layout and from 0.451 to 0.586 bar(g) for the pallet layout. At equal porosity, the pallet configuration produced pressures 18.9–38.8% higher than the rack configuration. However, obstacles did not invariably amplify the explosion: the solid pallet case produced 0.252 bar(g), 26.1% below the unobstructed reference, whereas the maximum value obtained for pallets at ϕ=0.9, was 71.8% higher. Pressure histories and reduced-pressure fields revealed markedly different responses for continuous and discrete layouts. These findings demonstrate that equal obstacle volume and nominal porosity do not imply an equivalent explosion response. Obstacle spatial arrangement and porosity should therefore be considered explicitly in dust-explosion hazard assessment and venting design.

  • Open Access

    Sensitivity of SDOF steel-plate response to equivalent pressure-time histories for vented deflagration loads

    by Francesco Pinna, Marco Zucca, Marco Simoncelli

    This paper investigates how the assumed pressure-time shape for vented dust deflagrations affects the predicted dynamic response of thin steel plates using a bilinear SDOF model with Cowper-Symonds strain-rate effects. Five peak/impulse-matched, peak-aligned equivalent load laws triangular, right-triangle, reversed Friedlander, double reversed Friedlander, and a hybrid ramp and tail are compared against a CFD-validated reference trace. Results quantify sensitivity of mid-span deflection and peak demand to rise/decay assumptions, identifying when impulse matching is sufficient and when rise time and post-peak tail must be modeled explicitly.


  • Open Access

    Dynamic Response-Based Bridge Monitoring and Structural Assessment: A Structured Scoping Review and Evidence Inventory

    by Muhammad Ziad Bacha, Mario Lucio Puppio, Marco Zucca, Mauro Sassu

    Dynamic response measurements support bridge monitoring and structural assessment because they are obtainable under operational loading and are sensitive to changes in stiffness, boundary conditions, and mass distribution. This article presents a structured scoping review of dynamic-response-based bridge monitoring and assessment. It covers damage-sensitive indicators, stiffness/capacity proxy inference, interpretation under operational and extreme loading, sensing with acquisition (contact, and indirect/drive-by), and data processing, machine learning and digital-twin integration for decision support. Evidence was identified through targeted searches in Scopus and The Lens with duplicate resolution in Zotero. The cited studies are compiled into a traceable evidence inventory linked to method families and decision objectives. The synthesis shows that global modal properties enable change screening but are highly confounded by environmental/operational variability. Localization and state characterization typically require denser or higher-fidelity sensing and signal conditioning. Finally, capacity-related inference using calibrated conversion models or machine learning (ML) surrogates remains context-bounded and validation-dependent. This review provides an end-to-end pipeline, evidence-maturity rubric, and conservative failure-mode checks with escalation logic that tie SHM outputs to inspection and analysis rather than direct condition declarations for bridge owners. This review is intentionally scoped and does not claim PRISMA-style comprehensiveness.


  • Analysis of Structural Vulnerability Through the Scanning of Road Pavements: Overview and Perspectives

    by Muhammad Ziad Bacha, Mario Lucio Puppio, Marco Zucca, Alfredo Staglianò, Mauro Sassu