YXYuan Xuan

Yuan Xuan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuan Xuan has a total of 72 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of a Method for Shape Optimization for a Gas Turbine Fuel Injector Design Using Metal-Additive Manufacturing

    by Sagar Jalui, Yuan Xuan, Guha Manogharan, Jacqueline O'COnnor

    Adjoint shape optimization has enabled physics-based optimal designs for aerodynamic surfaces. Additive manufacturing (AM) makes it possible to manufacture complex shapes. However, there has been a gap between optimal and manufacturable surfaces due to the inherent limitations of commercial computational fluid dynamics (CFD) codes to implement geometric constraints during adjoint computation. In such cases, the design sensitivities are exported and used to perform constrained shape modifications using parametric information stored in computer aided design (CAD) files to satisfy manufacturability constraints. However, modifying the design using adjoint methods in CFD solvers and performing constrained shape modification in CAD can lead to inconsistencies due to different shape parameterization schemes. This paper describes a method to enable the simultaneous optimization of the fluid domain and impose AM manufacturability constraints, resolving one of the key issues of geometry definition for isogeometric analysis. Similar to a grid convergence study, the proposed method verifies the consistencies between shape parameterization techniques present within commercial CAD and CFD software during mesh movement as a part of the adjoint shape optimization routine. By identifying the appropriate parameters essential to a shape optimization study, the error metric between the different parameterization techniques converges to demonstrate sufficient consistencies for justifiable exchange of data between CAD and CFD. For the identified shape optimization parameters, the error metric to measure the deviation between the two parameterization schemes lies within the AM laser-powder bed fusion (L-PBF) process tolerance. Additionally, comparison for subsequent objective function calculations between iterations of the optimization loop showed acceptable differences within 1% variation between the modified geometries obtained using the two parameterization schemes. This method provides justification for the use of multiphysics guided adjoint design sensitivities computed in CFD software to perform shape modifications in CAD to incorporate AM manufacturability constraints during the shape optimization loop such that optimal designs are also additively manufacturable.


  • Open Access

    The sooting behavior of lactones as sustainable fuels

    by Zhanhong Xiang, Mehmet B. Acikel, Collin J. Hansen, Ga-Un Jeong, Raúl Pérez-Soto, David Z. Wang, Vivian C. Whoriskey, Seonah Kim, Charles S. McEnally, Lisa D. Pfefferle, et al.

    Lactones are an interesting category of sustainable fuels since they have the same carbon backbones as sugars but are liquids at room temperature. Engine studies have shown that lactones can reduce soot emissions as well as net carbon dioxide emissions. In this study quantitative sooting tendencies were measured for 10 lactones with a wide range of molecular structures. They included compounds with ring sizes varying from three to six carbons, unsubstituted compounds, substituted compounds with side chain lengths ranging from one to seven carbons, and one compound with a double bond in the ring. Two alkenoic acids were also tested since they are possible isomerization products of lactones. The sooting tendencies were characterized by yield sooting index (YSI), which is based on the soot yield when a methane/air nonpremixed flame is doped with 1000 μmol/mol of the test fuel. The results show that the lactones have lower sooting tendencies than conventional gasoline, diesel fuel, and Jet A aviation fuel, even when accounting for their lower heats of combustion. However, the sooting tendencies depend strongly on molecular structure, so the right lactones must be chosen to maximize the emissions benefits. The measured sooting tendencies are generally larger than those predicted with a group contribution method, which indicates that the lactones have high sooting tendencies given the set of atoms they contain. To explain this observation, reactive molecular dynamics simulations and quantum chemistry calculations were performed. The results show that the lactones tend to decompose directly to CO2, so the oxygen atoms are being used inefficiently to sequester only one carbon atom.


  • Open Access

    The Sooting Behavior of Lactones as Sustainable Fuels

    by Zhanhong Xiang, Mehmet Acikel, Collin Hansen, Ga-Un Jeong, Seonah Kim, Charles McEnally, Raúl Pérez-Soto, Lisa Pfefferle, David Wang, Vivian Whoriskey, et al.

    Lactones are an interesting category of sustainable fuels since they have the same carbon backbones as sugars but are liquids at room temperature. Engine studies have shown that lactones can reduce soot emissions as well as net carbon dioxide emissions. In this study quantitative sooting tendencies were measured for 10 lactones with a wide range of molecular structures. They included compounds with ring sizes varying from three to six carbons, unsubstituted compounds, substituted compounds with side chain lengths ranging from one to seven carbons, and one compound with a double bond in the ring. Two alkenoic acids were also tested since they are possible isomerization products of lactones. The sooting tendencies were characterized by yield sooting index (YSI), which is based on the soot yield when a methane/air nonpremixed flame is doped with 1000 μmol/mol of the test fuel. The results show that the lactones have lower sooting tendencies than conventional gasoline, diesel fuel, and Jet A aviation fuel, even when accounting for their lower heats of combustion. However, the sooting tendencies depend strongly on molecular structure, so the right lactones must be chosen to maximize the emissions benefits. The measured sooting tendencies are generally larger than those predicted with a group contribution method, which indicates that the lactones have high sooting tendencies given the set of atoms they contain. To explain this observation, reactive molecular dynamics simulations and quantum chemistry calculations were performed. The results show that the lactones tend to decompose directly to CO2, so the oxygen atoms are being used inefficiently to sequester only one carbon atom.


  • Open Access

    In situ temperature measurements in sooting methane/air flames using synchrotron x-ray fluorescence of seeded krypton atoms

    by Matthew J. Montgomery, Hyunguk Kwon, Alan L. Kastengren, Lisa D. Pfefferle, Travis Sikes, Robert S. Tranter, Yuan Xuan, Charles S. McEnally

    Synchrotron x-ray fluorescence has been used to measure temperatures in optically dense gases where traditional methods would fail. These data provide a benchmark for stringent tests of computational fluid dynamics models for complex systems where physical and chemical processes are intimately linked. The experiments measured krypton number densities in a sooting, atmospheric pressure, nonpremixed coflow flame that is widely used in combustion research. The experiments not only form targets for the models, but the simulations also identify potential sources of uncertainties in the measurements, allowing for future improvements.


  • Describing the Mechanism of Instability Suppression Using a Central Pilot Flame With Coupled Experiments and Simulations

    by Jihang Li, Hyunguk Kwon, Drue Seksinsky, Daniel Doleiden, Jacqueline O'COnnor, Yuan Xuan, Michel Akiki, James Blust

    Pilot flames are commonly used to extend combustor operability limits and suppress combustion oscillations in low-emissions gas turbines. Combustion oscillations, a coupling between heat release rate oscillations and combustor acoustics, can arise at the operability limits of low-emissions combustors where the flame is more susceptible to perturbations. While the use of pilot flames is common in land-based gas turbine combustors, the mechanism by which they suppress instability is still unclear. In this study, we consider the impact of a central jet pilot on the stability of a swirl-stabilized flame in a variable-length, single-nozzle combustor. Previously, the pilot flame was found to suppress the instability for a range of equivalence ratios and combustor lengths. We hypothesize that combustion oscillation suppression by the pilot occurs because the pilot provides hot gases to the vortex breakdown region of the flow that recirculate and improve the static, and hence dynamic, stability of the main flame. This hypothesis is based on a series of experimental results that show that pilot efficacy is a strong function of pilot equivalence ratio but not pilot flow rate, which would indicate that the temperature of the pilot products as well as the combustion intensity of the pilot flame play more of a role in oscillation stabilization than the length of the pilot flame relative to the main flame. Further, the pilot-flame efficacy increases with pilot-flame equivalence ratio until it matches the main-flame equivalence ratio; at pilot equivalence ratios greater than the main equivalence ratio, the pilot-flame efficacy does not change significantly with pilot equivalence ratio. To understand these results, we use large-eddy simulation (LES) to provide a detailed analysis of the flow in the region of the pilot flame and the transport of radical species in the region between the main flame and pilot flame. The simulation, using a flamelet/progress variable-based chemistry tabulation approach and standard eddy viscosity/diffusivity turbulence closure models, provides detailed information that is inaccessible through experimental measurements.


  • An a priori analysis of the structure of local subfilter-scale species surrounding flame fronts using direct numerical simulation of turbulent premixed flames

    by Yash G. Shah, James G. Brasseur, Yuan Xuan

    An a priori analysis of subfilter-scale (SFS) species structure important to estimate chemical reaction rates in large-eddy simulation (LES) is performed using direct numerical simulation (DNS) of a turbulent premixed flame at a turbulence Reynolds number R e 0 = 329 and Karlovitz number K a 0 = 7.23 with semi-detailed finite-rate chemistry. Differences between the complete chemical reaction rates extracted from DNS and those estimated from LES-filtered variables are quantified. The spatial distributions of these differences are found to be localized in regions surrounding the flame front for representative reactions. Within these regions, variations in the localization relative to the flame, scale, and magnitude of the SFS species concentrations are quantified, and mean SFS structure is determined. SFS species structure is found in two groupings: “single-banded” structure characterized by one distinct peak and “double-banded” structure characterized by two peaks of opposite signs. Species that are produced and consumed within the flame such as CH 2 O and HCO are observed to have single-banded structure, and species displaying a frontal behavior such as n-C7H16 and OH are found to have double-banded structure, on average. The local SFS structure surrounding the flame is impacted by neighboring flame-flame interactions as well as by variations in flame curvature. The impacts of the flame-flame interactions are strong when the SFS species structure has “large” length scales with concentration peaks significantly displaced from the flame front. Curvature effects are shown to be strong in high curvature regions of the flame.


  • Open Access

    Fourier–physical space coherent structure in flame–vortex interactions relevant to flame–turbulence interactions using a new signal periodization procedure

    by Paulo L. K. Paes, James G. Brasseur, Yuan Xuan, Yash G. Shah

    The aim of the current study is to characterize key multidimensional relationships between coherent structures in physical vs Fourier/scale space representations of flame–turbulence interactions, as a basis for future analysis of the nonlinear couplings between key resolved scale (RS) and subfilter scale (SFS) motions in large-eddy simulation (LES) of premixed turbulent combustion. However, applying the bounded Fourier transform (FTF) in the nonperiodic flame-normal direction requires the removal of nonphysical Fourier content from the boundary discontinuities. To this end, we have developed a broadly applicable “discontinuity pollution removal” procedure for application to the FTF of multidimensional signals with a single nonperiodic direction. The procedure balances periodization of the signal near the boundaries with minimization of signal modification away from the boundaries. We applied the procedure in a physical–Fourier space analysis of the interactions between a flame and single-scale eddies modeled as the impact of a train of two-dimensional (2D) vortices on an initially planar premixed flame. We find that a specific spectrally broad localized coherent structure in Fourier space connects RS to SFS fluctuations in thermal energy and species concentration that, in physical space, are localized to the corrugations in the flame front in response to eddy–flame interactions. Within the RS fluctuations of energy and species concentration, the flame corrugation structure in physical space is found to be localized to sub-volumes within the RS region of 2D Fourier space. This new understanding of physical–Fourier space relationships categorizes classes of RS–SFS interactions relevant to SFS modeling in LES of premixed turbulent combustion.


  • Elucidating the chemical pathways responsible for the sooting tendency of 1 and 2-phenylethanol

    by Brian D. Etz, Gina M. Fioroni, Richard A. Messerly, Mohammad J. Rahimi, Peter C. St. John, David J. Robichaud, Earl D. Christensen, Brian P. Beekley, Charles S. McEnally, Lisa D. Pfefferle, et al.


  • ReaxFF-based molecular dynamics study of bio-derived polycyclic alkanes as potential alternative jet fuels

    by Hyunguk Kwon, Aditya Lele, Junqing Zhu, Charles S. McEnally, Lisa D. Pfefferle, Yuan Xuan, Adri C.T. van Duin