Mehmet Eker
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mehmet Eker has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Durmuş Yarımpabuç
Osmaniye Korkut Ata Üniversitesi
4 shared publications - Kerimcan Celebi
ÇUKUROVA ÜNİVERSİTESİ, CEYHAN MÜHENDİSLİK FAKÜLTESİ, MAKİNE MÜHENDİSLİĞİ BÖLÜMÜ
3 shared publications - Demet Zalaoğlu
Department of Mechanical Engineering, Osmaniye Korkut Ata University, Osmaniye 80000, Turkey
2 shared publications Ali Yildirim
OSMANİYE KORKUT ATA ÜNİVERSİTESİ, OSMANİYE MESLEK YÜKSEKOKULU
1 shared publication- Ali Yildirim
OSMANİYE KORKUT ATA ÜNİVERSİTESİ, OSMANİYE MESLEK YÜKSEKOKULU
1 shared publication D. Yarımpabuç
Department of Mathematics, Osmaniye Korkut Ata University, Osmaniye, Turkey
1 shared publication
Latest Publications
- Open Access
Metaheuristic-Driven Ensemble Learning for Robust Fracture Energy Prediction in FDM-Fabricated PLA Components
Additive manufacturing (AM) has reshaped production methodologies by enabling the fabrication of complex geometries for high-performance applications. As a leading AM technique, Fused Deposition Modeling (FDM) is widely used for its versatility. However, the structural reliability of FDM-printed parts is fundamentally dictated by their mechanical performance, where impact toughness functions as a critical benchmark across demanding industrial environments. Polylactic acid (PLA) has distinguished itself as a premier biodegradable polymer, favored for its superior stiffness and processability. Nevertheless, the inherent brittleness and anisotropic behavior of FDM-printed PLA pose significant challenges, necessitating investigation of their fracture mechanics. This study firstly evaluates the impact toughness of FDM-processed PLA Izod specimens using impact tests, structured within a Taguchi design of experiments (DoE) methodology. An L27 orthogonal array was employed to investigate the influence of manufacturing parameters on impact behavior and fracture energy. Then, to achieve high-fidelity predictions from experimental data, the parametric effects were systematically investigated through an advanced machine learning framework. In the first stage, optimal prediction models were identified by evaluating five mathematical formulations hybridized with five nature-inspired optimization algorithms (GWO, SMA, GSA, FPA, and KH) across nine dataset combinations. In the second stage, these best-performing models were integrated into a metaheuristic ensemble using the GWO to perform a weighted aggregation. This hybrid ensemble methodology significantly enhanced predictive accuracy, achieving a Mean Absolute Percentage Error (MAPE) of 5.0847%, which represents a 37.3% relative improvement over the best individual base model.
Open AccessMetaheuristic-Driven Ensemble Learning for Robust Fracture Energy Prediction in FDM-Fabricated PLA Components
Additive manufacturing (AM) has reshaped production methodologies by enabling the fabrication of complex geometries for high-performance applications. As a leading AM technique, Fused Deposition Modeling (FDM) is widely used for its versatility. However, the structural reliability of FDM-printed parts is fundamentally dictated by their mechanical performance, where impact toughness functions as a critical benchmark across demanding industrial environments. Polylactic acid (PLA) has distinguished itself as a premier biodegradable polymer, favored for its superior stiffness and processability. Nevertheless, the inherent brittleness and anisotropic behavior of FDM-printed PLA pose significant challenges, necessitating investigation of their fracture mechanics. This study firstly evaluates the impact toughness of FDM-processed PLA Izod specimens using impact tests, structured within a Taguchi design of experiments (DoE) methodology. An L27 orthogonal array was employed to investigate the influence of manufacturing parameters on impact behavior and fracture energy. Then, to achieve high-fidelity predictions from experimental data, the parametric effects were systematically investigated through an advanced machine learning framework. In the first stage, optimal prediction models were identified by evaluating five mathematical formulations hybridized with five nature-inspired optimization algorithms (GWO, SMA, GSA, FPA, and KH) across nine dataset combinations. In the second stage, these best-performing models were integrated into a metaheuristic ensemble using the GWO to perform a weighted aggregation. This hybrid ensemble methodology significantly enhanced predictive accuracy, achieving a Mean Absolute Percentage Error (MAPE) of 5.0847%, which represents a 37.3% relative improvement over the best individual base model.
- 1 June 2024
- Published by Pleiades Publishing Ltd in Journal of Engineering Thermophysics
- Vol. 33 (2) , 354-364
Exact Transient Heat Conduction of Functionally Graded Thick Structures
Closed form solution of the transient thermal analysis in functionally graded cylindrical and spherical bodies under different thermal loads are presented. It is assumed that the material properties change according to the different inhomogeneity parameters according to the power-law in the radial direction. In the partial differential equation obtained under these conditions, the time dependence is eluted with the Laplace transform and transformed into Bessel differential equation in Laplacian space. This equation, which is solved with Bessel functions in Laplacian space, is transformed into physical space with the modified inverse Durbin method. Behaviors of cylindrical and spherical bodies under constant, convective and time-dependent boundary conditions are investigated. Besides, it is aimed to obtain benchmark solutions for these structures to the literature.
- 1 June 2024
- Published by Pleiades Publishing Ltd in Journal of Engineering Thermophysics
- Vol. 33 (2) , 354-364
Exact Transient Heat Conduction of Functionally Graded Thick Structures
Closed form solution of the transient thermal analysis in functionally graded cylindrical and spherical bodies under different thermal loads are presented. It is assumed that the material properties change according to the different inhomogeneity parameters according to the power-law in the radial direction. In the partial differential equation obtained under these conditions, the time dependence is eluted with the Laplace transform and transformed into Bessel differential equation in Laplacian space. This equation, which is solved with Bessel functions in Laplacian space, is transformed into physical space with the modified inverse Durbin method. Behaviors of cylindrical and spherical bodies under constant, convective and time-dependent boundary conditions are investigated. Besides, it is aimed to obtain benchmark solutions for these structures to the literature.
- Open Access
- 17 July 2023
- Published by Bor Dergisi in Journal of Boron
- Vol. 8 (3) , 92-98
Toz Metalurjisi Yöntemi ile Hazırlanan AlCu-B4C Kompozitlerin Yoğunluğuna İmalat Değişkenlerinin Etkisinin İncelenmesi
Bu çalışmada, toz metalurjisi yöntemi ile hazırlanan, farklı oranlarda (hacimce % 0, 10 ve 20) B4C parçacık takviyeli Al-%10Cu ana yapılı kompozit malzemenin sinterleme sonrası yoğunluğuna, takviye oranı, sıkıştırma basıncı ve sinterleme sıcaklığının etkisi incelenmiştir. Kompozit üretimi için yüksek saflıkta alaşım ve seramik tozları kullanılmış, elde edilen homojen karışım soğuk preste sıkıştırılmış ve tüp fırında sinterlenmiştir. Tayin edilen değişkenlerin sinterleme sonrası yoğunluğa etkisi Taguchi deney tasarımı yöntemi kullanılarak incelenmiştir. Bu amaç ile sürece en uygun Taguchi tasarımı olan, L9 ortogonal deney tasarımı seçilmiş ve deneyler bu matrise göre gerçekleştirilmiştir. Bu tasarım ile yapılan analizler sonucunda elde edilen S/N oranı yanıtlarına göre, sıkıştırma basıncının en yüksek etkiye, takviye oranının da görece düşük etkiye sahip olduğu gözlemlenmiştir. Taguchi deney tasarımı ve yapılan regresyon analizi sonucunda, oluşturulan regresyon modelinin ise %95 güven aralığın içinde olduğu sonucu elde edilmiştir.
- 17 July 2023
- Published by Bor Dergisi in Journal of Boron
- Vol. 8 (3) , 92-98
Open AccessToz Metalurjisi Yöntemi ile Hazırlanan AlCu-B4C Kompozitlerin Yoğunluğuna İmalat Değişkenlerinin Etkisinin İncelenmesi
Bu çalışmada, toz metalurjisi yöntemi ile hazırlanan, farklı oranlarda (hacimce % 0, 10 ve 20) B4C parçacık takviyeli Al-%10Cu ana yapılı kompozit malzemenin sinterleme sonrası yoğunluğuna, takviye oranı, sıkıştırma basıncı ve sinterleme sıcaklığının etkisi incelenmiştir. Kompozit üretimi için yüksek saflıkta alaşım ve seramik tozları kullanılmış, elde edilen homojen karışım soğuk preste sıkıştırılmış ve tüp fırında sinterlenmiştir. Tayin edilen değişkenlerin sinterleme sonrası yoğunluğa etkisi Taguchi deney tasarımı yöntemi kullanılarak incelenmiştir. Bu amaç ile sürece en uygun Taguchi tasarımı olan, L9 ortogonal deney tasarımı seçilmiş ve deneyler bu matrise göre gerçekleştirilmiştir. Bu tasarım ile yapılan analizler sonucunda elde edilen S/N oranı yanıtlarına göre, sıkıştırma basıncının en yüksek etkiye, takviye oranının da görece düşük etkiye sahip olduğu gözlemlenmiştir. Taguchi deney tasarımı ve yapılan regresyon analizi sonucunda, oluşturulan regresyon modelinin ise %95 güven aralığın içinde olduğu sonucu elde edilmiştir.
- Open Access
- 3 December 2022
- Published by Kahramanmaras Sutcu Imam University Journal of Engineering Sciences in Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
- Vol. 25 (4) , 602-614
İŞLEVSEL DERECELENDİRİLMİŞ DAİRESEL BİR KANATÇIĞIN TERMOELASTİK DAVRANIŞININ SAYISAL İNCELENMESİ
Bu çalışmada, mekanik ve ısıl özelliklerinin radyal eksen boyunca üstel bir fonksiyonla değiştiği varsayılan, eksenel simetrik, ince, dikdörtgen profilli dairesel bir kanatçıktaki sıcaklık dağılımı ve sıcaklık farklarından dolayı oluşan ısıl gerilmeler, pseudospectral Chebysev ve sonlu elemanlar yöntemleri ile ele alınmıştır. Chebyshev yöntemin doğruluğu literatürde mevcut analitik çözümle karşılaştırılarak test edilmiştir. Kanatçık, ZrO_2/Ti-6Al-4V malzeme çifti ile derecelendirilmiş, uygulanan sınır koşulları altında sıcaklık dağılımı ve ısıl gerilmeler elde edilmiştir. Problem, pseudospektral Chebyshev ve sonlu elemanlar yöntemleri ile ayrı ayrı çözülmüş ve elde edilen sonuçlar grafiksel olarak karşılaştırılmıştır. Pseudospektral Chebyshev yönteminin sonlu elamanlar yöntemine göre daha az nokta sayısı ile yakın sonuçlar verdiği gözlemlenmiştir.
- 3 December 2022
- Published by Kahramanmaras Sutcu Imam University Journal of Engineering Sciences in Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
- Vol. 25 (4) , 602-614
Open AccessİŞLEVSEL DERECELENDİRİLMİŞ DAİRESEL BİR KANATÇIĞIN TERMOELASTİK DAVRANIŞININ SAYISAL İNCELENMESİ
Bu çalışmada, mekanik ve ısıl özelliklerinin radyal eksen boyunca üstel bir fonksiyonla değiştiği varsayılan, eksenel simetrik, ince, dikdörtgen profilli dairesel bir kanatçıktaki sıcaklık dağılımı ve sıcaklık farklarından dolayı oluşan ısıl gerilmeler, pseudospectral Chebysev ve sonlu elemanlar yöntemleri ile ele alınmıştır. Chebyshev yöntemin doğruluğu literatürde mevcut analitik çözümle karşılaştırılarak test edilmiştir. Kanatçık, ZrO_2/Ti-6Al-4V malzeme çifti ile derecelendirilmiş, uygulanan sınır koşulları altında sıcaklık dağılımı ve ısıl gerilmeler elde edilmiştir. Problem, pseudospektral Chebyshev ve sonlu elemanlar yöntemleri ile ayrı ayrı çözülmüş ve elde edilen sonuçlar grafiksel olarak karşılaştırılmıştır. Pseudospektral Chebyshev yönteminin sonlu elamanlar yöntemine göre daha az nokta sayısı ile yakın sonuçlar verdiği gözlemlenmiştir.
- 29 September 2022
- Published by Bingol Universitesi in Türk Doğa ve Fen Dergisi
- Vol. 11 (3) , 123-128
A Generalized Thermoelastic Behaviour of Isotropic Hollow Cylinder
In this study, the thermoelastic behavior of a thick-walled homogeneous cylinder based on Lord-Shulman theory is investigated. It is assumed that the inner and outer surfaces of the cylinder are traction-free, and the outer surface is insulated while the inner surface is subjected to a time-dependent internal temperature load. The governing equations in coupled form are solved with the pseudospectral Chebyshev method. The numerical approach is validated with benchmark results in the literature. The temperature, radial and tangential stress distributions are examined for three different moments to represent the time-varying effects of the applied instantaneous temperature load. The effect of the coupled term in Lord-Shulman theory for different high temperatures is examined and the difference between the coupled and uncoupled solution in different time periods is tabulated and the difference is highlighted.
- 29 September 2022
- Published by Bingol Universitesi in Türk Doğa ve Fen Dergisi
- Vol. 11 (3) , 123-128
A Generalized Thermoelastic Behaviour of Isotropic Hollow Cylinder
In this study, the thermoelastic behavior of a thick-walled homogeneous cylinder based on Lord-Shulman theory is investigated. It is assumed that the inner and outer surfaces of the cylinder are traction-free, and the outer surface is insulated while the inner surface is subjected to a time-dependent internal temperature load. The governing equations in coupled form are solved with the pseudospectral Chebyshev method. The numerical approach is validated with benchmark results in the literature. The temperature, radial and tangential stress distributions are examined for three different moments to represent the time-varying effects of the applied instantaneous temperature load. The effect of the coupled term in Lord-Shulman theory for different high temperatures is examined and the difference between the coupled and uncoupled solution in different time periods is tabulated and the difference is highlighted.
- 13 May 2021
- Published by Taylor & Francis in Waves in Random and Complex Media
- Vol. 34 (2) , 1001-1016
Thermal wave propagation in a functionally graded annular fin with fixed base
Thermal wave propagation and efficiency analysis of thin axially symmetric functionally graded annular fins with a fixed base boundary condition are examined. All material properties are graded along the radial direction using the Mori–Tanaka homogenization scheme to design a realistic and physically meaningful graded material model and create a smooth distribution of elastic and thermal material properties. The novelty of this research is handling a more realistic annular fin, which has sufficient strength in practice and significantly reduces weight, using two different metal materials with the elasticity-based Mori–Tanaka model. These conditions result in two-point linear boundary value problems that are numerically solved by the pseudospectral Chebyshev method. The temperature distributions, thermal stresses and the efficiency in the functionally graded annular fin are compared with fins made of steel only and aluminium only.
- 13 May 2021
- Published by Taylor & Francis in Waves in Random and Complex Media
- Vol. 34 (2) , 1001-1016
Thermal wave propagation in a functionally graded annular fin with fixed base
Thermal wave propagation and efficiency analysis of thin axially symmetric functionally graded annular fins with a fixed base boundary condition are examined. All material properties are graded along the radial direction using the Mori–Tanaka homogenization scheme to design a realistic and physically meaningful graded material model and create a smooth distribution of elastic and thermal material properties. The novelty of this research is handling a more realistic annular fin, which has sufficient strength in practice and significantly reduces weight, using two different metal materials with the elasticity-based Mori–Tanaka model. These conditions result in two-point linear boundary value problems that are numerically solved by the pseudospectral Chebyshev method. The temperature distributions, thermal stresses and the efficiency in the functionally graded annular fin are compared with fins made of steel only and aluminium only.
- Open Access
- 1 March 2019
- Published by SDU Journal of Natural and Applied Sciences in SDÜ Fen Bilimleri Enstitüsü Dergisi
- Vol. 23, 181-186
A Practical Method for the Dynamic Analysis of Non-Uniform Piezoelectric Rod
In this paper, a unified approach for the dynamic analysis of non-uniform piezoelectric rod is presented. It is assumed that the cross sectional area of the rod is varying along the longitudinal axis, arbitrarily. Therefore, the partial differential equations that govern the non-uniform piezoelectric isotropic rod in a forced vibration analysis are obtained with a variable coefficient taking into account mechanical and electrostatic equations. Analytical solutions of these equations are only possible for simple crosssection areas. First, the governing equations are transformed to the Laplace space and then solved numerically by pseudospectral Chebyshev approach for arbitrary cross-section area under four different load functions. The final results are transformed to the time domain using modified Durbin’s procedure. The technique is validated for simple cross-section area results that can also be solved analytically.
- 1 March 2019
- Published by SDU Journal of Natural and Applied Sciences in SDÜ Fen Bilimleri Enstitüsü Dergisi
- Vol. 23, 181-186
Open AccessA Practical Method for the Dynamic Analysis of Non-Uniform Piezoelectric Rod
In this paper, a unified approach for the dynamic analysis of non-uniform piezoelectric rod is presented. It is assumed that the cross sectional area of the rod is varying along the longitudinal axis, arbitrarily. Therefore, the partial differential equations that govern the non-uniform piezoelectric isotropic rod in a forced vibration analysis are obtained with a variable coefficient taking into account mechanical and electrostatic equations. Analytical solutions of these equations are only possible for simple crosssection areas. First, the governing equations are transformed to the Laplace space and then solved numerically by pseudospectral Chebyshev approach for arbitrary cross-section area under four different load functions. The final results are transformed to the time domain using modified Durbin’s procedure. The technique is validated for simple cross-section area results that can also be solved analytically.