Prem Babu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Prem Babu has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Mukesh Kumar
Indian Institute of Technology (IIT) Indore
10 shared publications - Rahul Dev Mishra
Optoelectronic Nanodevice Research Laboratory, Department of Electrical Engineering, Indian Institute of Technology, Indore, India
6 shared publications - Suresh Kumar Pandey
Indian Institute of Technology Indore
6 shared publications - Santosh Kumar
Department of Electrical and Computer Engineering, North Carolina State University, Raleigh, USA
5 shared publications - Ashutosh Kumar
Optoelectronic Nanodevice Research Laboratory, Department of Electrical Engineering, Indian Institute of Technology (IIT) Indore, Indore, India
3 shared publications - Nikita Mohanta
Optoelectronic Nanodevice Research Laboratory, Department of Electrical Engineering, Indian Institute of Technology (IIT) Indore, Madhya Pradesh 453552, India
3 shared publications
Latest Publications
- 9 July 2026
- Published by World Scientific Pub Co Pte Ltd in Journal of Nonlinear Optical Physics & Materials
2D Optical beam steering using phase-tuning in Si-ITO-based optical phased arrays
This study presents a comprehensive simulation-based investigation of a [ ] channel optical phased array (OPA), highlighting the advantages of utilizing Si-ITO phase shifters over conventional Si-based devices. Through rigorous FDTD simulations, we achieved a compact OPA design with dimensions of [ ], demonstrating remarkable steering capabilities. The Si-ITO phase shifters enabled a wide lateral steering range of [ ], surpassing the performance of conventional phase shifters that would require significantly larger apertures to achieve similar results. Additionally, we achieved a [ ] longitudinal steering range through wavelength tuning from [ ]m to [ ]m, with a divergence angle of [ ]. The use of Si-ITO as a phase shifter, owing to its superior electro-optic effect, addresses the inherent limitations of traditional phase shifters, particularly their larger footprints. The chip-scale dimensions of ITO play a crucial role in achieving compact phase shifters, essential for high-density on-chip packaging. This advancement in Si-ITO technology holds significant promise for the development of compact, efficient, and high-performance OPAs for future on-chip optical communication systems.
- 9 July 2026
- Published by World Scientific Pub Co Pte Ltd in Journal of Nonlinear Optical Physics & Materials
2D Optical beam steering using phase-tuning in Si-ITO-based optical phased arrays
This study presents a comprehensive simulation-based investigation of a [ ] channel optical phased array (OPA), highlighting the advantages of utilizing Si-ITO phase shifters over conventional Si-based devices. Through rigorous FDTD simulations, we achieved a compact OPA design with dimensions of [ ], demonstrating remarkable steering capabilities. The Si-ITO phase shifters enabled a wide lateral steering range of [ ], surpassing the performance of conventional phase shifters that would require significantly larger apertures to achieve similar results. Additionally, we achieved a [ ] longitudinal steering range through wavelength tuning from [ ]m to [ ]m, with a divergence angle of [ ]. The use of Si-ITO as a phase shifter, owing to its superior electro-optic effect, addresses the inherent limitations of traditional phase shifters, particularly their larger footprints. The chip-scale dimensions of ITO play a crucial role in achieving compact phase shifters, essential for high-density on-chip packaging. This advancement in Si-ITO technology holds significant promise for the development of compact, efficient, and high-performance OPAs for future on-chip optical communication systems.
- 8 July 2026
- Published by World Scientific Pub Co Pte Ltd in Journal of Nonlinear Optical Physics & Materials
PSHE-enhanced temperature sensor based on nonlinear magneto-optics and plasmonics
A highly sensitive optical temperature sensor based on photonic spin Hall effect (PSHE)-induced beam shifts in a magneto-plasmonic multilayer configuration is theoretically proposed. The structure consists of an Au–TiO 2 –graphene anisotropic thin-film stack operating in the Kretschmann geometry with a GaP prism and with ethanol as the temperature-dependent sensing medium. Under surface plasmon resonance excitation in the mid-infrared wavelength regime, the spin-dependent in-plane and out-of-plane spatial beam shifts exhibit strong dependence on temperature. The sensor response is further analyzed through external magnetic field modulation and electrostatic gating of graphene, enabling controlled manipulation of magneto-optic and carrier-induced effects. Owing to the enhancement, the proposed scheme achieves a remarkably high temperature sensitivity of 3.49[ ]cm/K. The presented study highlights the potential of magneto-plasmonically assisted PSHE-based platforms for tunable and high-resolution temperature sensing, with prospective applications in nanophotonics, integrated optical sensing, and multifunctional plasmonic devices.
- 8 July 2026
- Published by World Scientific Pub Co Pte Ltd in Journal of Nonlinear Optical Physics & Materials
PSHE-enhanced temperature sensor based on nonlinear magneto-optics and plasmonics
A highly sensitive optical temperature sensor based on photonic spin Hall effect (PSHE)-induced beam shifts in a magneto-plasmonic multilayer configuration is theoretically proposed. The structure consists of an Au–TiO 2 –graphene anisotropic thin-film stack operating in the Kretschmann geometry with a GaP prism and with ethanol as the temperature-dependent sensing medium. Under surface plasmon resonance excitation in the mid-infrared wavelength regime, the spin-dependent in-plane and out-of-plane spatial beam shifts exhibit strong dependence on temperature. The sensor response is further analyzed through external magnetic field modulation and electrostatic gating of graphene, enabling controlled manipulation of magneto-optic and carrier-induced effects. Owing to the enhancement, the proposed scheme achieves a remarkably high temperature sensitivity of 3.49[ ]cm/K. The presented study highlights the potential of magneto-plasmonically assisted PSHE-based platforms for tunable and high-resolution temperature sensing, with prospective applications in nanophotonics, integrated optical sensing, and multifunctional plasmonic devices.
- 17 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (5) , 1858-1864
Carrier-Induced Optical Modulation in Si-ITO Based Ring Resonator With Improved Tuning Efficiency
Reconfigurable, high-speed, and energy-efficient modulators are central to the advancement of next-generation optical communication and signal processing systems. Here, we demonstrate a micro-ring modulator based on semiconductor heterojunctions of silicon and indium tin oxide (ITO). The device exploits field-effect induced refractive index tuning in accumulation layer of ITO which has strong plasma dispersion and epsilon near zero (ENZ) effect enabling efficient electro-optic modulation with ultra-compact device footprint. A voltage-tunable spectral range with a wavelength shift of 1 nm, corresponding to EO tuning efficiency of 0.5 nm/V is reported. The 20 μm long device achieves a high extinction ratio of 21 dB and electrical bandwidth of 26.5 GHz which enables the high-speed operation of more than 50 Gbps while maintaining low energy consumption of 0.112 pJ/bit, positioning the device among the most efficient integrated modulators based on ITO. The reported results establish the Si-ITO ring modulator as a compact, CMOS-compatible platform for wavelength-selective modulation and tunable filters with potential for applications in microwave photonic signal processing, and neuromorphic photonic computing applications.
- 17 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (5) , 1858-1864
Carrier-Induced Optical Modulation in Si-ITO Based Ring Resonator With Improved Tuning Efficiency
Reconfigurable, high-speed, and energy-efficient modulators are central to the advancement of next-generation optical communication and signal processing systems. Here, we demonstrate a micro-ring modulator based on semiconductor heterojunctions of silicon and indium tin oxide (ITO). The device exploits field-effect induced refractive index tuning in accumulation layer of ITO which has strong plasma dispersion and epsilon near zero (ENZ) effect enabling efficient electro-optic modulation with ultra-compact device footprint. A voltage-tunable spectral range with a wavelength shift of 1 nm, corresponding to EO tuning efficiency of 0.5 nm/V is reported. The 20 μm long device achieves a high extinction ratio of 21 dB and electrical bandwidth of 26.5 GHz which enables the high-speed operation of more than 50 Gbps while maintaining low energy consumption of 0.112 pJ/bit, positioning the device among the most efficient integrated modulators based on ITO. The reported results establish the Si-ITO ring modulator as a compact, CMOS-compatible platform for wavelength-selective modulation and tunable filters with potential for applications in microwave photonic signal processing, and neuromorphic photonic computing applications.
- 19 August 2025
- Published by Wiley in Physica Status Solidi (a)
Crosstalk Reduction and λ‐Selectivity Enhancement of On‐Chip Array Waveguide Grating Using Ring Resonator
With the increasing demand for high‐speed and compact photonic devices in modern communication systems, migrating crosstalk between adjacent waveguides in arrayed waveguide gratings (AWG) has become essential. A novel approach is proposed to address the challenges of crosstalk reduction and wavelength selectivity enhancement in on‐chip AWG by integrating ring resonators. By strategically placing ring resonators near the AWG's output waveguide, this approach effectively reduces unwanted interference and crosstalk to −13 dB, improving signal quality and transmission efficiency. Additionally, this integration of ring resonators enhances wavelength selectivity, allowing for precise control of desired output from individual wavelength channels within the AWG. This selectivity enhancement offers desired wavelength routing and multiplexing flexibility, making it well‐suited for advanced optical communication networks and wavelength‐division multiplexing applications. The results validate the effectiveness of the proposed technique, offering promising prospects for high‐performance integrated photonic devices and advancing next‐generation optical communication systems.
- 19 August 2025
- Published by Wiley in Physica Status Solidi (a)
Crosstalk Reduction and λ‐Selectivity Enhancement of On‐Chip Array Waveguide Grating Using Ring Resonator
With the increasing demand for high‐speed and compact photonic devices in modern communication systems, migrating crosstalk between adjacent waveguides in arrayed waveguide gratings (AWG) has become essential. A novel approach is proposed to address the challenges of crosstalk reduction and wavelength selectivity enhancement in on‐chip AWG by integrating ring resonators. By strategically placing ring resonators near the AWG's output waveguide, this approach effectively reduces unwanted interference and crosstalk to −13 dB, improving signal quality and transmission efficiency. Additionally, this integration of ring resonators enhances wavelength selectivity, allowing for precise control of desired output from individual wavelength channels within the AWG. This selectivity enhancement offers desired wavelength routing and multiplexing flexibility, making it well‐suited for advanced optical communication networks and wavelength‐division multiplexing applications. The results validate the effectiveness of the proposed technique, offering promising prospects for high‐performance integrated photonic devices and advancing next‐generation optical communication systems.
- 4 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (3) , 1299-1305
Multilevel Nanophotonic Resistive Switching in Ag-ITO-SiO2 on Silicon With Enhanced Optical Storage Density
Multilevel resistive devices have gained a lot of research attention in the past decade due to their attractive potential applications in high-density non-volatile memory, and unconventional computing. We propose an engineered multilevel nanophotonic resistive switching device with CMOS compatible Ag-ITO-SiO2 structure on silicon for enhanced storage density and in-memory computing with optical readout functionality. The four-layered structure includes a SiO2/ITO region strategically positioned between an efficient Ag (top) electrode and an underlying p-Si bottom electrode. The engineered nanophotonic device confined hybrid plasmonic mode, mainly in the SiO2 region and with an applied voltage conductive filaments form/deform along ITO and SiO2 layers influencing optical absorption detectable through interaction between the guided hybrid plasmonic mode and conductive filaments. The proposed device achieves stable multiple optical states by controlling compliance current, storing two bits without compromising accuracy to enable parallel computing, and efficient area savings with enhanced storing density for in-memory computing applications on a photonic platform. Additionally, the experimental results demonstrate a significant extinction ratio of 32 dB for the $10\ \mu \text{m} \times 500$ nm device with a low voltage operation. The engineered nanophotonic structure exhibits high retention, high endurance, low operating power, and high speed, making it suitable for various applications, including optical modulation, neuromorphic computation, biochemical sensing, photogating and high-density advanced memory devices.
- 4 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (3) , 1299-1305
Multilevel Nanophotonic Resistive Switching in Ag-ITO-SiO2 on Silicon With Enhanced Optical Storage Density
Multilevel resistive devices have gained a lot of research attention in the past decade due to their attractive potential applications in high-density non-volatile memory, and unconventional computing. We propose an engineered multilevel nanophotonic resistive switching device with CMOS compatible Ag-ITO-SiO2 structure on silicon for enhanced storage density and in-memory computing with optical readout functionality. The four-layered structure includes a SiO2/ITO region strategically positioned between an efficient Ag (top) electrode and an underlying p-Si bottom electrode. The engineered nanophotonic device confined hybrid plasmonic mode, mainly in the SiO2 region and with an applied voltage conductive filaments form/deform along ITO and SiO2 layers influencing optical absorption detectable through interaction between the guided hybrid plasmonic mode and conductive filaments. The proposed device achieves stable multiple optical states by controlling compliance current, storing two bits without compromising accuracy to enable parallel computing, and efficient area savings with enhanced storing density for in-memory computing applications on a photonic platform. Additionally, the experimental results demonstrate a significant extinction ratio of 32 dB for the $10\ \mu \text{m} \times 500$ nm device with a low voltage operation. The engineered nanophotonic structure exhibits high retention, high endurance, low operating power, and high speed, making it suitable for various applications, including optical modulation, neuromorphic computation, biochemical sensing, photogating and high-density advanced memory devices.
- 13 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (10) , 3814-3819
Electronically Controlled Semiconductor Nanoparticle Array for Tunable Plasmonic Metasurfaces
Plasmonic Metasurfaces (PMs) offer unprecedented ways to manipulate optical wavefronts with an ultra-thin layer of materials. Until recently, the research efforts have focused on designing passive metasurfaces. However, gaining high-speed, reversible control over individual pixels (basic building block) in these engineered structures can offer better and faster ways to control and shape light. Conventionally used tuning approaches target the whole substrate by either utilizing mechanically moving frames or tuning the refractive index of the whole substrate. Conceptualizing a high-speed, switching mechanism for locally tuning pixel/meta-atom will allow new applications that were previously unimaginable. Here we introduce a novel approach for tunable plasmonic meta-atoms via modulation doping in semiconductor nanostructures at the telecommunication window which can potentially be used for local control in PMs. The proposed approach is based on (voltage-controlled) tuning the quantum confinement of the charge carrier from 1-D to 0-D in semiconductor nanorods. The applied field allows accumulation of excess charge carrier density and facilitates tuning plasmonic resonance of nanoresonators from 1800–1550 nm. A high-speed voltage-controlled localized surface plasmon resonance is reported in semiconductor nanostructures fabricated via a cost-effective, scalable, self-assembly process based on aluminum anodization. Moreover, the concept in-principle will be compatible with most semiconductors allowing exciting applications in tunable metasurfaces, spasers, modulators, and many more.
- 13 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (10) , 3814-3819
Electronically Controlled Semiconductor Nanoparticle Array for Tunable Plasmonic Metasurfaces
Plasmonic Metasurfaces (PMs) offer unprecedented ways to manipulate optical wavefronts with an ultra-thin layer of materials. Until recently, the research efforts have focused on designing passive metasurfaces. However, gaining high-speed, reversible control over individual pixels (basic building block) in these engineered structures can offer better and faster ways to control and shape light. Conventionally used tuning approaches target the whole substrate by either utilizing mechanically moving frames or tuning the refractive index of the whole substrate. Conceptualizing a high-speed, switching mechanism for locally tuning pixel/meta-atom will allow new applications that were previously unimaginable. Here we introduce a novel approach for tunable plasmonic meta-atoms via modulation doping in semiconductor nanostructures at the telecommunication window which can potentially be used for local control in PMs. The proposed approach is based on (voltage-controlled) tuning the quantum confinement of the charge carrier from 1-D to 0-D in semiconductor nanorods. The applied field allows accumulation of excess charge carrier density and facilitates tuning plasmonic resonance of nanoresonators from 1800–1550 nm. A high-speed voltage-controlled localized surface plasmon resonance is reported in semiconductor nanostructures fabricated via a cost-effective, scalable, self-assembly process based on aluminum anodization. Moreover, the concept in-principle will be compatible with most semiconductors allowing exciting applications in tunable metasurfaces, spasers, modulators, and many more.
- 6 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (10) , 3779-3785
Plasmonic Absorber Based on Engineered Cu-ITO Structure on Silicon With Low Voltage Tuning and High Extinction Ratio
An electrically tunable plasmonic absorber device is experimentally demonstrated at 1550 nm wavelength. The device consists of alternating Cu- ITO grating on the top of a p-type silicon rib waveguide, filled with n-type indium tin oxide (ITO) as a capping layer. The distributed plasmonic mode at the interface of Cu-SiO 2 -Si is efficiently coupled with ITO. The electrically tunable permittivity of ITO changes the optical absorption by employing electrically driven carrier depletion and accumulation. We demonstrate large tuning of optical intensity by electrically driven carrier accumulation at ITO interface by applying very low voltage from 0 to −4 V. A 100-μm long device exhibits a high extinction ratio of 22 dB and wide 3 dB bandwidth of 52.2 GHz. Applications for our proposed device include imaging, biosensing, intensity modulators, and other multi-functional nanophotonic devices where change in optical absorption is a key requirement.
- 6 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (10) , 3779-3785
Plasmonic Absorber Based on Engineered Cu-ITO Structure on Silicon With Low Voltage Tuning and High Extinction Ratio
An electrically tunable plasmonic absorber device is experimentally demonstrated at 1550 nm wavelength. The device consists of alternating Cu- ITO grating on the top of a p-type silicon rib waveguide, filled with n-type indium tin oxide (ITO) as a capping layer. The distributed plasmonic mode at the interface of Cu-SiO 2 -Si is efficiently coupled with ITO. The electrically tunable permittivity of ITO changes the optical absorption by employing electrically driven carrier depletion and accumulation. We demonstrate large tuning of optical intensity by electrically driven carrier accumulation at ITO interface by applying very low voltage from 0 to −4 V. A 100-μm long device exhibits a high extinction ratio of 22 dB and wide 3 dB bandwidth of 52.2 GHz. Applications for our proposed device include imaging, biosensing, intensity modulators, and other multi-functional nanophotonic devices where change in optical absorption is a key requirement.
- 1 December 2023
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 62 (12) , 127102-9
Optically triggered AlGaN/GaN semiconductor power transistor with bi-layer anti-reflecting structure
An optical controlled AlGaN/GaN semiconductor power transistor with a low on-resistance normally off high electron mobility two-dimensional electron gas (2DEG) channel is numerically proposed. The device consists of a p-GaN region sandwiched between undoped GaN over which n-AlGaN (Al 20%) is formed. The 2DEG channel is formed at the n-AlGaN/GaN heterojunction due to photogenerated electron jumps from the valance band to the conduction band, when a beam of light having energy greater than the band gap (3.4 eV) of GaN at a wavelength of 350 nm falls on the SiO2 and TiO2 Bi-layers antireflecting structure and light penetrates deeper into the p-GaN region and generates e-h pairs. The device current can be optically controlled by varying the power intensity of the incident beam of light; this device exhibits very low (<1 Ω) on-resistance, which yields a very low conduction loss. The switching characteristics of the device are also investigated, and the device attains low rise and fall times.
- 1 December 2023
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 62 (12) , 127102-9
Optically triggered AlGaN/GaN semiconductor power transistor with bi-layer anti-reflecting structure
An optical controlled AlGaN/GaN semiconductor power transistor with a low on-resistance normally off high electron mobility two-dimensional electron gas (2DEG) channel is numerically proposed. The device consists of a p-GaN region sandwiched between undoped GaN over which n-AlGaN (Al 20%) is formed. The 2DEG channel is formed at the n-AlGaN/GaN heterojunction due to photogenerated electron jumps from the valance band to the conduction band, when a beam of light having energy greater than the band gap (3.4 eV) of GaN at a wavelength of 350 nm falls on the SiO2 and TiO2 Bi-layers antireflecting structure and light penetrates deeper into the p-GaN region and generates e-h pairs. The device current can be optically controlled by varying the power intensity of the incident beam of light; this device exhibits very low (<1 Ω) on-resistance, which yields a very low conduction loss. The switching characteristics of the device are also investigated, and the device attains low rise and fall times.
- 22 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 22 (1536125X) , 166-171
Comb-Like Hybrid Plasmonic Ring Resonator for Large and Voltage Tunable Group Delay
A nanophotonic ring resonator based on hybrid plasmonic waveguide is numerically proposed. Introduction of a comb-like structure in the resonator results in large group delay which can be tuned electrically. The proposed silicon-based nanophotonic structure incorporates comb-like design with copper-air subwavelength grating on SiO 2 which supports resonance enhanced propagation of hybrid plasmonic mode confined in 50 nm thick SiO 2 . The device with its engineered design shows an ultra-large group delay of 208 ps for 1 mm length. The proposed device also exhibits a voltage tunable group delay with a tuning of 48 ps on varying the voltage from −5 V to 5 V. The proposed device with its CMOS compatible and scalable design is useful for integrated optoelectronic circuits. The reported large delay and wide tuning make it a perfect candidate for applications in optical delay lines, signal processing, beam steering in phase array antennas and in microwave photonics.
- 22 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 22 (1536125X) , 166-171
Comb-Like Hybrid Plasmonic Ring Resonator for Large and Voltage Tunable Group Delay
A nanophotonic ring resonator based on hybrid plasmonic waveguide is numerically proposed. Introduction of a comb-like structure in the resonator results in large group delay which can be tuned electrically. The proposed silicon-based nanophotonic structure incorporates comb-like design with copper-air subwavelength grating on SiO 2 which supports resonance enhanced propagation of hybrid plasmonic mode confined in 50 nm thick SiO 2 . The device with its engineered design shows an ultra-large group delay of 208 ps for 1 mm length. The proposed device also exhibits a voltage tunable group delay with a tuning of 48 ps on varying the voltage from −5 V to 5 V. The proposed device with its CMOS compatible and scalable design is useful for integrated optoelectronic circuits. The reported large delay and wide tuning make it a perfect candidate for applications in optical delay lines, signal processing, beam steering in phase array antennas and in microwave photonics.
- 31 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (6) , 5695-5702
Nanophotonic Ring Resonator Based on Slotted Hybrid Plasmonic Waveguide for Biochemical Sensing
Hybrid plasmonic waveguide holds a great promise as a potential nanophotonic platform for variety of applications including biosensing which usually requires strong analyte-matter interaction. We propose a nanophotonic ring resonator based on slotted hybrid plasmonic waveguide as a platform to realize resonance enhanced sensing with strong light-analyte interaction on a subwavelength scale. The optical mode guided in the bus waveguide gets coupled to the slotted ring as hybrid plasmonic mode which enables efficient bio-sensing. The slotted hybrid plasmonic waveguide utilized in the ring provides larger propagation length over 2.5 mm with a subwavelength confinement at the wavelength of 1.55 μm. The slotted structure also exhibits broadband propagation of hybrid plasmonic mode where the propagation length remains around 1.2 mm over a wavelength range from 1.3 μm to 1.6 μm. A 29.6 nm shift in the transmission spectra of the engineered ring resonator is observed on changing the analyte refractive index to 1.3514 (polluted water) from 1.333 (pure water). The sensitivity for the detection of polluted water is reported to be 1609 nm/RIU, which is approximately four times more than dielectric slotted ring resonator and eight times more than the ring resonator with a ridge structure. The proposed engineered slotted waveguide structure may be helpful in realizing nanophotonic devices for a various applications, including bio-chemical sensing and large-scale photonic integration.
- 31 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (6) , 5695-5702
Nanophotonic Ring Resonator Based on Slotted Hybrid Plasmonic Waveguide for Biochemical Sensing
Hybrid plasmonic waveguide holds a great promise as a potential nanophotonic platform for variety of applications including biosensing which usually requires strong analyte-matter interaction. We propose a nanophotonic ring resonator based on slotted hybrid plasmonic waveguide as a platform to realize resonance enhanced sensing with strong light-analyte interaction on a subwavelength scale. The optical mode guided in the bus waveguide gets coupled to the slotted ring as hybrid plasmonic mode which enables efficient bio-sensing. The slotted hybrid plasmonic waveguide utilized in the ring provides larger propagation length over 2.5 mm with a subwavelength confinement at the wavelength of 1.55 μm. The slotted structure also exhibits broadband propagation of hybrid plasmonic mode where the propagation length remains around 1.2 mm over a wavelength range from 1.3 μm to 1.6 μm. A 29.6 nm shift in the transmission spectra of the engineered ring resonator is observed on changing the analyte refractive index to 1.3514 (polluted water) from 1.333 (pure water). The sensitivity for the detection of polluted water is reported to be 1609 nm/RIU, which is approximately four times more than dielectric slotted ring resonator and eight times more than the ring resonator with a ridge structure. The proposed engineered slotted waveguide structure may be helpful in realizing nanophotonic devices for a various applications, including bio-chemical sensing and large-scale photonic integration.