Mohamed Issam Ziane
Research Subjects
Mohamed Issam Ziane has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
Hamza Bennacer
8 shared publicationsMoufdi Hadjab
7 shared publicationsHamza Abid
Applied Materials Laboratory, Research Center, University Djillali Liabes, Sidi Bel Abbes, Algeria
5 shared publicationsSmail Berrah
Mastery Renewable Energies Laboratory LMER, University of A. Mira, Bejaia, Algeria
3 shared publicationsA. Boukortt
2 shared publications- Abdelkader Djelloul
Centre de Recherche en Technologie des Semi-conducteurs pour l’Energétique (CRTSE), Algiers, Algeria
2 shared publications
Latest Publications
- Open Access
- 19 December 2023
- Published by MDPI AG in Engineering Proceedings
- Vol. 56 (1) , 127
Temperature and Pressure-Induced Phase Transitions in Cu2ZnSnS4 and Cu2ZnGeS4: Thermodynamic Analysis and Structural Transformations
This study focuses on investigating the phase transitions in two materials, CuZnSnS (CZTS) and CuZnGeS (CZGS), which are important for understanding their structural and functional properties. The temperature and pressure-induced tetragonal-orthorhombic phase transitions in these materials are analyzed using density functional theory (DFT) and the quasi-harmonic Debye model. The research aims to examine the changes in the material’s structure and the associated thermodynamic properties during these phase transitions. The results reveal that both compounds exhibit a negative value of H, indicating the release of energy during the mixing process, which suggests an exothermic nature. The DFT calculations at zero temperature and pressure demonstrate that the stannite structure represents the ground state configuration of the CuZnSnS system (with x = 0%), compared to the wurtzite-stannite structure. The calculations also show that the difference in enthalpies of formation (H) between the stannite and wurtzite-stannite phases for CZTS is estimated to be 8.884 meV per atom. Regarding CuZnGeS, the wurtzite-stannite structure is found to be the most stable, closely followed by the stannite structure, with enthalpies of formation of −4.833 eV·atom and −4.804 eV·atom, respectively. Notably, there are no definitive reports on enthalpy studies for the CuZnGeS system in the existing literature. Understanding the behavior of these materials under different conditions can contribute to the development of improved performance and stability of devices based on CZTS and CZGS.- 19 December 2023
- Published by MDPI AG in Engineering Proceedings
- Vol. 56 (1) , 127
Open AccessTemperature and Pressure-Induced Phase Transitions in Cu2ZnSnS4 and Cu2ZnGeS4: Thermodynamic Analysis and Structural Transformations
This study focuses on investigating the phase transitions in two materials, CuZnSnS (CZTS) and CuZnGeS (CZGS), which are important for understanding their structural and functional properties. The temperature and pressure-induced tetragonal-orthorhombic phase transitions in these materials are analyzed using density functional theory (DFT) and the quasi-harmonic Debye model. The research aims to examine the changes in the material’s structure and the associated thermodynamic properties during these phase transitions. The results reveal that both compounds exhibit a negative value of H, indicating the release of energy during the mixing process, which suggests an exothermic nature. The DFT calculations at zero temperature and pressure demonstrate that the stannite structure represents the ground state configuration of the CuZnSnS system (with x = 0%), compared to the wurtzite-stannite structure. The calculations also show that the difference in enthalpies of formation (H) between the stannite and wurtzite-stannite phases for CZTS is estimated to be 8.884 meV per atom. Regarding CuZnGeS, the wurtzite-stannite structure is found to be the most stable, closely followed by the stannite structure, with enthalpies of formation of −4.833 eV·atom and −4.804 eV·atom, respectively. Notably, there are no definitive reports on enthalpy studies for the CuZnGeS system in the existing literature. Understanding the behavior of these materials under different conditions can contribute to the development of improved performance and stability of devices based on CZTS and CZGS. - Open Access
- 17 May 2023
- Published by MDPI AG in Engineering Proceedings
- Vol. 37 (1) , 32
Conception of a Lighting Control and Management System with Graphical User Interface
Lighting is the largest source of electricity consumption. The implementation of new technologies makes it possible to reduce the energy bill as well as the operating costs. In this work, we created a control and management system for exterior lighting using creative, intelligent, and autonomous methods. The project allows control room operators to monitor the system and interact when needed. Our project is subdivided into three major parts, ordering, data processing, and action. The first part is carried out in two modes: manually using an Optocoupler and controlled with a graphical interface by RS232 serial-type communication. The second part is processed by a microcontroller; as for the third part, it controls three poles through an MOC3023 Optotriac IC and BTA16-600B Triac for full and half lighting. For the controlled mode, we used the dimmer principle which works by essentially chopping parts out of the AC voltage. The brightness of the lamp is determined by the power transferred to it, so the more the waveform is chopped, the more it dims. A zero crossing control is needed for phase cutting. The graphical application of our project has a rather rough design. It is divided into two windows: the first consists of a connection window, and the second one is for the main control interface. On this control interface, there are basically three tabs: connection and serial connection status, control, and operating mode.
- 17 May 2023
- Published by MDPI AG in Engineering Proceedings
- Vol. 37 (1) , 32
Open AccessConception of a Lighting Control and Management System with Graphical User Interface
Lighting is the largest source of electricity consumption. The implementation of new technologies makes it possible to reduce the energy bill as well as the operating costs. In this work, we created a control and management system for exterior lighting using creative, intelligent, and autonomous methods. The project allows control room operators to monitor the system and interact when needed. Our project is subdivided into three major parts, ordering, data processing, and action. The first part is carried out in two modes: manually using an Optocoupler and controlled with a graphical interface by RS232 serial-type communication. The second part is processed by a microcontroller; as for the third part, it controls three poles through an MOC3023 Optotriac IC and BTA16-600B Triac for full and half lighting. For the controlled mode, we used the dimmer principle which works by essentially chopping parts out of the AC voltage. The brightness of the lamp is determined by the power transferred to it, so the more the waveform is chopped, the more it dims. A zero crossing control is needed for phase cutting. The graphical application of our project has a rather rough design. It is divided into two windows: the first consists of a connection window, and the second one is for the main control interface. On this control interface, there are basically three tabs: connection and serial connection status, control, and operating mode.
- 2 January 2023
- Published by Elsevier in Materials Today Communications
- Vol. 34
A new ANN-PSO framework to chalcopyrite’s energy band gaps prediction
- 2 January 2023
- Published by Elsevier in Materials Today Communications
- Vol. 34
A new ANN-PSO framework to chalcopyrite’s energy band gaps prediction
- 16 September 2022
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 96 (9) , 1986-1994
Optoelectronic Study of CuAlX2 (X = S, Se, Te) Chalcopyrite Semiconductor
We explored the structural and optoelectronic changes of the substitution of X with S, Se, and Te in CuAlX2. The obtained fundamental properties are assessed by using the density functional theory (DFT) based on the first principales technique with the full potential linearized augmented plane wavemethod (FP‑LAPW). In this work, we used the Perdew, Burke, and Ernzerhofgernalized gradient approximation (PBE-GGA) potential for structural properties and Tran–Blaha modified Beck–Johnson potential (TB‑mBJ) for the band gap, the density of states (DOS) as well as for the optical properties. The computed ground state lattice parameters such as equilibrium lattice constants, bulk modulus and its first derivative are determined and compared to available experimental and theoretical results. As results, the TB-mBJ approximation shows a substantial improvement for the band gap compared to the previous published data. The study density of the state diagram shows that the maximum value of the valence band is mainly determined by the Cu-d state and p-state of S, Se, and Te. We investigated the refractive index, absorption coefficient, energy loss spectrum, and optical conductivity in a wide energy range for optical properties such as the real and imaginary parts of the dielectric function. Determine the results of these materials in order to investigate and to assess their utility as solar cell materials.
- 16 September 2022
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 96 (9) , 1986-1994
Optoelectronic Study of CuAlX2 (X = S, Se, Te) Chalcopyrite Semiconductor
We explored the structural and optoelectronic changes of the substitution of X with S, Se, and Te in CuAlX2. The obtained fundamental properties are assessed by using the density functional theory (DFT) based on the first principales technique with the full potential linearized augmented plane wavemethod (FP‑LAPW). In this work, we used the Perdew, Burke, and Ernzerhofgernalized gradient approximation (PBE-GGA) potential for structural properties and Tran–Blaha modified Beck–Johnson potential (TB‑mBJ) for the band gap, the density of states (DOS) as well as for the optical properties. The computed ground state lattice parameters such as equilibrium lattice constants, bulk modulus and its first derivative are determined and compared to available experimental and theoretical results. As results, the TB-mBJ approximation shows a substantial improvement for the band gap compared to the previous published data. The study density of the state diagram shows that the maximum value of the valence band is mainly determined by the Cu-d state and p-state of S, Se, and Te. We investigated the refractive index, absorption coefficient, energy loss spectrum, and optical conductivity in a wide energy range for optical properties such as the real and imaginary parts of the dielectric function. Determine the results of these materials in order to investigate and to assess their utility as solar cell materials.
- 1 February 2022
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 277, 125553
Computational evaluation of optoelectronic, thermodynamic and electron transport properties of CuYZ2 (Z= S, Se and Te) chalcogenides semiconductors
- 1 February 2022
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 277, 125553
Computational evaluation of optoelectronic, thermodynamic and electron transport properties of CuYZ2 (Z= S, Se and Te) chalcogenides semiconductors
- 30 December 2020
- Published by Taylor & Francis in International Journal of Modelling and Simulation
- Vol. 42 (2) , 179-191
A numerical optimization study of CdS and Mg0.125Zn0.875O buffer layers in CIGS-based solar cells using wxAMPS-1D package
The performance of copper indium gallium selenium (CIGS) based solar cells with cadmium sulfide (CdS) and magnesium zinc oxide (Mg x Zn1-x O) buffer layers has been investigated comparatively with the new version of a one-dimensional device simulation program for the analysis of microelectronic and photonic structures (wxAMPS-1D). The structures of solar cells have been analysed keeping in view the effect of doping as well as of thickness of buffer and absorber layers. It is observed that the conversion efficiency and external quantum efficiency (EQE) are improved using Mg0.125Zn0.875O compound buffer layer for ZnO/Mg0.125Zn0.875O/CIGS structure to 22.01% and 89.7%, respectively, whereas the obtained conversion efficiency and EQE for ZnO/CdS/CIGS structure are 21.06% and 88.78%, respectively. The obtained results are in good agreement with the recently published work and the proposed structure of solar cells would have potential regarding improvements in the existing solar cell technology.
- 30 December 2020
- Published by Taylor & Francis in International Journal of Modelling and Simulation
- Vol. 42 (2) , 179-191
A numerical optimization study of CdS and Mg0.125Zn0.875O buffer layers in CIGS-based solar cells using wxAMPS-1D package
The performance of copper indium gallium selenium (CIGS) based solar cells with cadmium sulfide (CdS) and magnesium zinc oxide (Mg x Zn1-x O) buffer layers has been investigated comparatively with the new version of a one-dimensional device simulation program for the analysis of microelectronic and photonic structures (wxAMPS-1D). The structures of solar cells have been analysed keeping in view the effect of doping as well as of thickness of buffer and absorber layers. It is observed that the conversion efficiency and external quantum efficiency (EQE) are improved using Mg0.125Zn0.875O compound buffer layer for ZnO/Mg0.125Zn0.875O/CIGS structure to 22.01% and 89.7%, respectively, whereas the obtained conversion efficiency and EQE for ZnO/CdS/CIGS structure are 21.06% and 88.78%, respectively. The obtained results are in good agreement with the recently published work and the proposed structure of solar cells would have potential regarding improvements in the existing solar cell technology.
- 12 August 2019
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 48 (11) , 6991-7002
First-Principle Computed Structural and Thermodynamic Properties of Cu2ZnSn(SxSe1−x)4 Pentanary Solid Solution
- 12 August 2019
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 48 (11) , 6991-7002
First-Principle Computed Structural and Thermodynamic Properties of Cu2ZnSn(SxSe1−x)4 Pentanary Solid Solution