Kundan Kumar Suman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kundan Kumar Suman has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Ravi Kumar Gangwar
Department of Electronics Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad, India
6 shared publications M. Jijenth
Department of Electronics and Communication, Engineering The Oxford College of Engineering (TOCE) Bommanahalli, Bangalore - 560068, India
3 shared publications- Tripta Kumari
Department of Electronics Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad, India
3 shared publications A. K. Singh
Electronics & Radar Development Establishment (LRDE), DRDO, Bangalore, India
2 shared publicationsR K Gangwar
Department of Electronics Engineering, Indian Institute of Technology (ISM), Dhanbad, Jharkhand - 826004, India
2 shared publications- Raghvendra Kumar Chaudhary
IIT Kanpur
2 shared publications
Latest Publications
- 17 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Consumer Electronics
- Vol. 72 (2) , 2647-2657
A Novel Compact Printed Inverted-F Antenna Integrated Into Biker Helmets for Consumer Internet of Vehicles
This paper introduces a novel Planar Inverted-F Antenna (PIFA) design optimized for biker’s helmets, aimed at enhancing rider safety by facilitating effective communication systems. Road traffic injuries, a significant global health concern, disproportionately affect motorcycle riders, with mobile phone usage while riding increasing this risk. A helmet model, developed in CST software, serves as a testbed for evaluating antenna characteristics. The presented PIFA design, covering a frequency range from 2.36-2.6 GHz, offers a 9.8% impedance bandwidth around the 2.45 GHz ISM band and maintains high efficiency and stability despite variations in helmet materials and placements. Detailed specific absorption rate (SAR) analysis is done to ensure compliance with safety protocols. A link budget analysis examines the communication feasibility between helmet-mounted and mobile phone antennas, as well as between different helmet users. This study contributes significantly to the field of antenna-integrated helmet technology, offering a viable solution to enhance rider safety through improved communication capabilities.
- 17 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Consumer Electronics
- Vol. 72 (2) , 2647-2657
A Novel Compact Printed Inverted-F Antenna Integrated Into Biker Helmets for Consumer Internet of Vehicles
This paper introduces a novel Planar Inverted-F Antenna (PIFA) design optimized for biker’s helmets, aimed at enhancing rider safety by facilitating effective communication systems. Road traffic injuries, a significant global health concern, disproportionately affect motorcycle riders, with mobile phone usage while riding increasing this risk. A helmet model, developed in CST software, serves as a testbed for evaluating antenna characteristics. The presented PIFA design, covering a frequency range from 2.36-2.6 GHz, offers a 9.8% impedance bandwidth around the 2.45 GHz ISM band and maintains high efficiency and stability despite variations in helmet materials and placements. Detailed specific absorption rate (SAR) analysis is done to ensure compliance with safety protocols. A link budget analysis examines the communication feasibility between helmet-mounted and mobile phone antennas, as well as between different helmet users. This study contributes significantly to the field of antenna-integrated helmet technology, offering a viable solution to enhance rider safety through improved communication capabilities.
- 1 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 16 (1) , 122-130
Advanced Packaging of Conformal Wideband Antennas for UAVs With Optimized RCS Reduction
This article presents an advanced packaging architecture for conformal wideband antennas intended for unmanned aerial vehicles (UAVs), with specific emphasis on Vehicle-to-Everything (V2X) connectivity and radar cross-section (RCS) reduction. The proposed design employs a cavity-embedded Vivaldi antenna, where conformal behavior is achieved through a curvature-matched machined cylindrical cavity and Rohacell support. The antenna is engineered to operate across 2-18 GHz, providing wideband coverage suitable for multi-functional UAV communication and sensing. The packaged structure enhances the realized gain (5-12 dBi across the band) and achieves a significant RCS reduction down to –18 dBsm, facilitating improved survivability and reduced detectability in radar-monitored environments. Fabricated on a RO4350B substrate, the antenna maintains a compact footprint of 0.45λ₀ × 0.34λ₀ × 0.0016λ₀ at 2 GHz and is optimized for aerodynamic compatibility with UAV fuselage contours. Comprehensive full-wave simulations and measurements validate the performance of the integrated antenna–cavity assembly in terms of impedance bandwidth, radiation characteristics, and scattering behavior. The presented packaging approach demonstrates a robust pathway for UAV-centric wideband antenna integration, offering improved radiation stability, reduced signature, and compatibility with next-generation V2X communication systems.
- 1 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 16 (1) , 122-130
Advanced Packaging of Conformal Wideband Antennas for UAVs With Optimized RCS Reduction
This article presents an advanced packaging architecture for conformal wideband antennas intended for unmanned aerial vehicles (UAVs), with specific emphasis on Vehicle-to-Everything (V2X) connectivity and radar cross-section (RCS) reduction. The proposed design employs a cavity-embedded Vivaldi antenna, where conformal behavior is achieved through a curvature-matched machined cylindrical cavity and Rohacell support. The antenna is engineered to operate across 2-18 GHz, providing wideband coverage suitable for multi-functional UAV communication and sensing. The packaged structure enhances the realized gain (5-12 dBi across the band) and achieves a significant RCS reduction down to –18 dBsm, facilitating improved survivability and reduced detectability in radar-monitored environments. Fabricated on a RO4350B substrate, the antenna maintains a compact footprint of 0.45λ₀ × 0.34λ₀ × 0.0016λ₀ at 2 GHz and is optimized for aerodynamic compatibility with UAV fuselage contours. Comprehensive full-wave simulations and measurements validate the performance of the integrated antenna–cavity assembly in terms of impedance bandwidth, radiation characteristics, and scattering behavior. The presented packaging approach demonstrates a robust pathway for UAV-centric wideband antenna integration, offering improved radiation stability, reduced signature, and compatibility with next-generation V2X communication systems.
- 16 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (4) , 5708-5719
Wideband Circularly Polarized Conformal MIMO Antenna System for 5G Sub-6 GHz Vehicular Applications
This article introduces a wideband, circularly polarized, rectangular slot-based four-port multiple input multiple output (MIMO) antenna system for 5G sub-6 GHz vehicular communication. The proposed antenna element comprises an optimized radiator enclosed within a rectangular slot, excited through an L-shaped Coplanar Waveguide (CPW) technique to achieve wide impedance bandwidth. It includes an inverted L-shaped stripline and a stepped staircase structure, enhancing the axial ratio (AR) bandwidth. The MIMO system is formed by replicating the single-element antenna at a spacing of 0.2 λo, creating a four-port configuration. The introduction of annular ring-shaped parasitic patch elements reduces the mutual coupling between antenna elements. The proposed MIMO antenna attains impedance matching (S11 ≤ -10 dB) from 3.19 to 6.94 GHz (72.87%), while an AR bandwidth (AR ≤ 3 dB) from 3.09 to 6.19 GHz (66.8%), with a minimum isolation of 16 dB. The realized gain ranges from 3.44 to 7.51 dBic, with total efficiency varying between 90% and 98.5%. The proposed MIMO antenna was fabricated and tested in planar and conformal configurations. Furthermore, the proposed antenna is integrated into the vehicle roof to demonstrate its performance in vehicular scenarios. Additionally, a link budget analysis of the proposed MIMO system is performed to validate its communication performance.
- 16 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (4) , 5708-5719
Wideband Circularly Polarized Conformal MIMO Antenna System for 5G Sub-6 GHz Vehicular Applications
This article introduces a wideband, circularly polarized, rectangular slot-based four-port multiple input multiple output (MIMO) antenna system for 5G sub-6 GHz vehicular communication. The proposed antenna element comprises an optimized radiator enclosed within a rectangular slot, excited through an L-shaped Coplanar Waveguide (CPW) technique to achieve wide impedance bandwidth. It includes an inverted L-shaped stripline and a stepped staircase structure, enhancing the axial ratio (AR) bandwidth. The MIMO system is formed by replicating the single-element antenna at a spacing of 0.2 λo, creating a four-port configuration. The introduction of annular ring-shaped parasitic patch elements reduces the mutual coupling between antenna elements. The proposed MIMO antenna attains impedance matching (S11 ≤ -10 dB) from 3.19 to 6.94 GHz (72.87%), while an AR bandwidth (AR ≤ 3 dB) from 3.09 to 6.19 GHz (66.8%), with a minimum isolation of 16 dB. The realized gain ranges from 3.44 to 7.51 dBic, with total efficiency varying between 90% and 98.5%. The proposed MIMO antenna was fabricated and tested in planar and conformal configurations. Furthermore, the proposed antenna is integrated into the vehicle roof to demonstrate its performance in vehicular scenarios. Additionally, a link budget analysis of the proposed MIMO system is performed to validate its communication performance.
- 12 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Letters on Electromagnetic Compatibility Practice and Applications
- Vol. 7 (3) , 73-78
Metamaterial Absorber-Integrated CP MIMO DRA for EMI Reduction and High Isolation
This paper outlines a systematic approach for the designing of a quad port circularly polarized (CP) multiple-input multiple-output (MIMO) ring dielectric resonator antenna (DRA) characterized by low mutual electromagnetic interference. A hexagonal stub placed in cross ring shape working as a metamaterial absorber is employed to minimize coupling in a compact antenna system. A ring DRA, operating at 5.3 GHz, acts as a radiating element, excited by an unbalanced aperture and microstrip line. The unbalanced aperture, together with conformal arc strips loaded on the DRA, enables the circular polarization characteristics, generating left-hand circularly polarized (LHCP) radiation. The proposed absorber exhibits an absorption rate over 93%, with reflection approaching zero at the specified frequency. A 1×2 array of vertical absorbers is incorporated in a vertical arrangement between the antenna elements to reduce the coupling. Material characterization and equivalent circuit model (ECM) analysis are performed to improve understanding of the fundamentals of operation. The antenna is fabricated and validated. The proposed MIMO antenna is a promising candidate for WLAN and Wi-Fi networks.
- 12 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Letters on Electromagnetic Compatibility Practice and Applications
- Vol. 7 (3) , 73-78
Metamaterial Absorber-Integrated CP MIMO DRA for EMI Reduction and High Isolation
This paper outlines a systematic approach for the designing of a quad port circularly polarized (CP) multiple-input multiple-output (MIMO) ring dielectric resonator antenna (DRA) characterized by low mutual electromagnetic interference. A hexagonal stub placed in cross ring shape working as a metamaterial absorber is employed to minimize coupling in a compact antenna system. A ring DRA, operating at 5.3 GHz, acts as a radiating element, excited by an unbalanced aperture and microstrip line. The unbalanced aperture, together with conformal arc strips loaded on the DRA, enables the circular polarization characteristics, generating left-hand circularly polarized (LHCP) radiation. The proposed absorber exhibits an absorption rate over 93%, with reflection approaching zero at the specified frequency. A 1×2 array of vertical absorbers is incorporated in a vertical arrangement between the antenna elements to reduce the coupling. Material characterization and equivalent circuit model (ECM) analysis are performed to improve understanding of the fundamentals of operation. The antenna is fabricated and validated. The proposed MIMO antenna is a promising candidate for WLAN and Wi-Fi networks.
- 17 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 32 (5) , 3105-3113
Al2O3-Based Frequency-Agile MIMO System With Beam Tilt Correction Using PLA Concave Parabolic Reflector
This study introduces a new technique to enhance isolation among antenna elements in an Alumina (Al2O3)-based frequency-agile MIMO dielectric resonator antenna (DRA) system utilizing a polylactic acid (PLA)-based concave reflector. The proposed radiator is designed from ceramic material (Al2O3) with a relative dielectric constant (∈r) of 9.8. Frequency agility is attained by utilizing the intrinsic characteristics of the dielectric resonator, wherein its physical factors define the resonant frequency. Pin diode-based T-shaped power divider works as a feedline by utilizing its conductive and insulative property. Furthermore, the dielectric characteristics of PLA are utilized to improve inter-element isolation, resulting in a 24 dB enhancement, and to rectify beam tilt in the YZ plane. This results in improving antenna gain by around 2 dBi and allows for a beam tilt correction of up to approximately 40°. It also includes an RF biasing circuit that provides insulation to the RF components, ensuring optimal performance without interference or signal degradation. The efficacy of the proposed communication system is validated through real-time testing using an Arduino UNO-based system, confirming its adaptability and consistent performance across dynamic environmental conditions. The proposed design is validated via simulations and experiments, illustrating the efficacy of the PLA dielectric material in directing electromagnetic wave propagation and reducing coupling effects. The combination of DRA and dielectric reflector-based isolation makes this antenna system a suitable candidate for WLAN and DSRC applications.
- 17 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 32 (5) , 3105-3113
Al2O3-Based Frequency-Agile MIMO System With Beam Tilt Correction Using PLA Concave Parabolic Reflector
This study introduces a new technique to enhance isolation among antenna elements in an Alumina (Al2O3)-based frequency-agile MIMO dielectric resonator antenna (DRA) system utilizing a polylactic acid (PLA)-based concave reflector. The proposed radiator is designed from ceramic material (Al2O3) with a relative dielectric constant (∈r) of 9.8. Frequency agility is attained by utilizing the intrinsic characteristics of the dielectric resonator, wherein its physical factors define the resonant frequency. Pin diode-based T-shaped power divider works as a feedline by utilizing its conductive and insulative property. Furthermore, the dielectric characteristics of PLA are utilized to improve inter-element isolation, resulting in a 24 dB enhancement, and to rectify beam tilt in the YZ plane. This results in improving antenna gain by around 2 dBi and allows for a beam tilt correction of up to approximately 40°. It also includes an RF biasing circuit that provides insulation to the RF components, ensuring optimal performance without interference or signal degradation. The efficacy of the proposed communication system is validated through real-time testing using an Arduino UNO-based system, confirming its adaptability and consistent performance across dynamic environmental conditions. The proposed design is validated via simulations and experiments, illustrating the efficacy of the PLA dielectric material in directing electromagnetic wave propagation and reducing coupling effects. The combination of DRA and dielectric reflector-based isolation makes this antenna system a suitable candidate for WLAN and DSRC applications.
- 5 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (6) , 1904-1908
Design and Optimization of a Monolithic Thinned Dielectric Superstrate for Performance Enhancement in DRAA
In this letter, an innovative methodology is presented for the design of a monolithic thinned dielectric superstrate (TDS), aimed at enhancing the gain and minimizing the side lobe levels (SLL) associated with dielectric resonator antenna arrays (DRAA). A novel configuration of the monolithic TDS is meticulously analyzed and subsequently integrated with a 1×2 element DRAA operating in the C-band spectrum. This integration is primarily done to align the radiated electric fields (EFs) phase, which culminates in enhanced antenna characteristics. The design and optimization of the proposed TDS are systematically executed using the differential evolution algorithm (DEA), specifically utilizing the thinning technique. Electromagnetic (EM) simulations and measurement studies are performed to elucidate the efficacy of the developed methodology. Preliminary findings from the EM simulations indicate that introducing the proposed TDS yields a significant performance enhancement. To be precise, the superstrate enables a gain enhancement of 4 dBi and a SLL decrement of 5 dB over a frequency bandwidth of 300 MHz relative to configurations devoid of the superstrate. Significantly, the observed measurements validate the proposed design strategy, aligning well with simulation results and confirming its practical efficacy and viability. In essence, this innovative design offers a notable enhancement in DRAA performance without necessitating any escalation in design complexity or spatial dimensions.
- 5 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (6) , 1904-1908
Design and Optimization of a Monolithic Thinned Dielectric Superstrate for Performance Enhancement in DRAA
In this letter, an innovative methodology is presented for the design of a monolithic thinned dielectric superstrate (TDS), aimed at enhancing the gain and minimizing the side lobe levels (SLL) associated with dielectric resonator antenna arrays (DRAA). A novel configuration of the monolithic TDS is meticulously analyzed and subsequently integrated with a 1×2 element DRAA operating in the C-band spectrum. This integration is primarily done to align the radiated electric fields (EFs) phase, which culminates in enhanced antenna characteristics. The design and optimization of the proposed TDS are systematically executed using the differential evolution algorithm (DEA), specifically utilizing the thinning technique. Electromagnetic (EM) simulations and measurement studies are performed to elucidate the efficacy of the developed methodology. Preliminary findings from the EM simulations indicate that introducing the proposed TDS yields a significant performance enhancement. To be precise, the superstrate enables a gain enhancement of 4 dBi and a SLL decrement of 5 dB over a frequency bandwidth of 300 MHz relative to configurations devoid of the superstrate. Significantly, the observed measurements validate the proposed design strategy, aligning well with simulation results and confirming its practical efficacy and viability. In essence, this innovative design offers a notable enhancement in DRAA performance without necessitating any escalation in design complexity or spatial dimensions.
- 10 September 2019
- Published by Hindawi Limited in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 29 (12)
Dielectric resonator based two‐port dual band antenna for MIMO applications
This article investigates a dual band multiple input multiple output (MIMO) cylindrical dielectric resonator antenna (cDRA) for WLAN and WiMAX applications. It consists of two symmetrical orthogonally placed radiators. Each radiator is excited through a narrow rectangular aperture with the help of a microstrip line. For higher mode excitation, the proposed structure uses dual segment DRA which apparently looks like stacked geometry. The aperture fed dielectric resonator works as a feed for upper cDRA to generate higher order mode. The presented radiator covers the band between 3.3‐3.8 GHz and 5‐5.7 GHz. The measured isolation is better than 20 dB in the desired band. The average gain and radiation efficiency achieved for the proposed antenna is 6.0 dBi and 85%, respectively at the operating frequency band. In the proposed geometry, broadside radiation patterns are achieved by exciting HEM11δ and HEM12δ modes in a stacked geometry. Different MIMO performance parameters (ECC, DG, MEG, and CCL) are also estimated and analyzed. The prototype of proposed antenna is fabricated and tested. The measured outcomes are in good accord with the simulated one.
- 10 September 2019
- Published by Hindawi Limited in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 29 (12)
Dielectric resonator based two‐port dual band antenna for MIMO applications
This article investigates a dual band multiple input multiple output (MIMO) cylindrical dielectric resonator antenna (cDRA) for WLAN and WiMAX applications. It consists of two symmetrical orthogonally placed radiators. Each radiator is excited through a narrow rectangular aperture with the help of a microstrip line. For higher mode excitation, the proposed structure uses dual segment DRA which apparently looks like stacked geometry. The aperture fed dielectric resonator works as a feed for upper cDRA to generate higher order mode. The presented radiator covers the band between 3.3‐3.8 GHz and 5‐5.7 GHz. The measured isolation is better than 20 dB in the desired band. The average gain and radiation efficiency achieved for the proposed antenna is 6.0 dBi and 85%, respectively at the operating frequency band. In the proposed geometry, broadside radiation patterns are achieved by exciting HEM11δ and HEM12δ modes in a stacked geometry. Different MIMO performance parameters (ECC, DG, MEG, and CCL) are also estimated and analyzed. The prototype of proposed antenna is fabricated and tested. The measured outcomes are in good accord with the simulated one.
- 1 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
An expeditious synthesis of thinned planar antenna array by exploitation of multi-objective optimization technique
In this paper, we propose a multi-objective optimization technique to synthesize uniformly excited thinned planar antenna (UE-TPA) array with optimum peak side lobe level (PSLL), better average side lobe level (ASLL), narrowest possible half power beam width (HPBW) and higher directivity or gain. A modified binary coded genetic algorithm (MBC-GA) is employed to determine the best suitable combination of `ON' and `OFF' elements in an UE-TPA array corresponding to ameliorated aforesaid design parameters. To corroborate the capability of proposed method, a 10×20-element UE-TPA array is numerically analysed. Results obtained through the proposed approach are compared with those of previously published which shows that present method outmatches the methods available in literature.
- 1 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
An expeditious synthesis of thinned planar antenna array by exploitation of multi-objective optimization technique
In this paper, we propose a multi-objective optimization technique to synthesize uniformly excited thinned planar antenna (UE-TPA) array with optimum peak side lobe level (PSLL), better average side lobe level (ASLL), narrowest possible half power beam width (HPBW) and higher directivity or gain. A modified binary coded genetic algorithm (MBC-GA) is employed to determine the best suitable combination of `ON' and `OFF' elements in an UE-TPA array corresponding to ameliorated aforesaid design parameters. To corroborate the capability of proposed method, a 10×20-element UE-TPA array is numerically analysed. Results obtained through the proposed approach are compared with those of previously published which shows that present method outmatches the methods available in literature.
- 1 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
An optimization technique utilizing genetic algorithm for the synthesis of large thinned planar antenna array with low peak side lobe level
In this paper, an efficient optimization technique for the synthesis of large thinned planar antenna (LTPA) arrays is proposed. The main objective is to achieve optimal planar thinned array configuration which yields lowest possible low peak side lobe levels (PSLL). Towards this aim, authors employed improved genetic algorithm (IGA) in which some advancement in crossover and mutation operators are introduced to enhance algorithm performance. A 50×50-element LTPA array is numerically analysed to assess the performance of the proposed method. Results obtained through this study demonstrate that significant amount of reduction in PSLL is acheived.
- 1 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
An optimization technique utilizing genetic algorithm for the synthesis of large thinned planar antenna array with low peak side lobe level
In this paper, an efficient optimization technique for the synthesis of large thinned planar antenna (LTPA) arrays is proposed. The main objective is to achieve optimal planar thinned array configuration which yields lowest possible low peak side lobe levels (PSLL). Towards this aim, authors employed improved genetic algorithm (IGA) in which some advancement in crossover and mutation operators are introduced to enhance algorithm performance. A 50×50-element LTPA array is numerically analysed to assess the performance of the proposed method. Results obtained through this study demonstrate that significant amount of reduction in PSLL is acheived.
- 1 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 251-254
A novel technique based on modified genetic algorithm for the synthesis of thinned planar antenna array with low peak side lobe level over desired scan volume
In this paper, a novel algorithm is devised to reduce the peak side lobe level (PSLL) of the thinned planar antenna (TPA) array at antenna boresight as well as over the desired scan volume without occurrence of grating lobes when the beam is electronically scanned away from the boresight. Randomized symmetrical thinning is incorporated in the proposed algorithm to find the best combination of 'ON' and 'OFF' elements. Modified binary coded genetic algorithm (MBC-GA) is employed in the present study to solve this optimization problem. A 12×12-element TPA array is numerically examined to access the performance of proposed method. Results obtained through this study show that array under consideration renders maximum possible reduction in PSLL and also demonstrate the absence of grating lobes when the beam is scanned to 20 deg. and 40 deg. away from the boresight.
- 1 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 251-254
A novel technique based on modified genetic algorithm for the synthesis of thinned planar antenna array with low peak side lobe level over desired scan volume
In this paper, a novel algorithm is devised to reduce the peak side lobe level (PSLL) of the thinned planar antenna (TPA) array at antenna boresight as well as over the desired scan volume without occurrence of grating lobes when the beam is electronically scanned away from the boresight. Randomized symmetrical thinning is incorporated in the proposed algorithm to find the best combination of 'ON' and 'OFF' elements. Modified binary coded genetic algorithm (MBC-GA) is employed in the present study to solve this optimization problem. A 12×12-element TPA array is numerically examined to access the performance of proposed method. Results obtained through this study show that array under consideration renders maximum possible reduction in PSLL and also demonstrate the absence of grating lobes when the beam is scanned to 20 deg. and 40 deg. away from the boresight.