Abdallah Aziz
Research Subjects
Research Interests
Abdallah Aziz has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Abdelkader Iddou
Université Abdelhamid Ibn Badis
9 shared publications- Hafida Hentit
Université Abdelhamid Ibn Badis
5 shared publications Hakim Aguedal
Université Abdelhamid Ibn Badis
4 shared publications- Andrei Shishkin
ZTF Aerkom SIA, 32 Miera Str., LV-2169 Salaspils, Latvia
3 shared publications Jean Claude Jumas
Université of Montpellier 2
3 shared publicationsAndrei Shishkin
Riga Technical University
2 shared publications
Latest Publications
- 1 April 2019
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 800, 145-150
Biosorption of Lead(II) from Aqueous Solution by Raw and Treated Streptomyces rimosus: Equilibrium, Kinetic and Thermodynamic Studies
This study examines the elimination potential of bacterial biomass (Streptomyces rimosus) against lead (II). The biomass was used in a raw state and treated with NaOH. The adsorption was influenced by pH, temperature and contact time. Treated biomass eliminates the largest amount of lead (II) compared to raw biomass. The Langmuir isotherm is the most appropriate to describe our results with maximum capacity of 47.63 mg/g for lead at 45°C. These results suggest that microbial species as bacterial biomass can be used successfully in the treatment of wastewater contaminated by pollutants such as heavy metals.
- 1 April 2019
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 800, 145-150
Biosorption of Lead(II) from Aqueous Solution by Raw and Treated Streptomyces rimosus: Equilibrium, Kinetic and Thermodynamic Studies
This study examines the elimination potential of bacterial biomass (Streptomyces rimosus) against lead (II). The biomass was used in a raw state and treated with NaOH. The adsorption was influenced by pH, temperature and contact time. Treated biomass eliminates the largest amount of lead (II) compared to raw biomass. The Langmuir isotherm is the most appropriate to describe our results with maximum capacity of 47.63 mg/g for lead at 45°C. These results suggest that microbial species as bacterial biomass can be used successfully in the treatment of wastewater contaminated by pollutants such as heavy metals.
- 1 April 2019
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 800, 157-163
Biosorption of Chromium(VI) in a Fixed-Bed Column Using Adsorbent Biomass
The efficiency of bacterial biomass as an adsorbent for the removal of Chromium in a fixed column was the subject of this study. The effect of different parameters such as initial Cr (VI) concentrations (25, 50, and 100mg/L), flow rate (0.5, 0.75, and 1 mL/min), and bed depth (8, 16, and 24 cm) on Cr (VI) biosorption were investigated. The breakthrough data obtained for Cr (VI) removal was more adequately described by the Clark and Yan model with high correlation coefficients (R2 = 0,996). According to the results obtained, fixed bacterial biomass was estimated as possible biosorbent for removal of chromium (VI) from aqueous solutions in a dynamic process.
- 1 April 2019
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 800, 157-163
Biosorption of Chromium(VI) in a Fixed-Bed Column Using Adsorbent Biomass
The efficiency of bacterial biomass as an adsorbent for the removal of Chromium in a fixed column was the subject of this study. The effect of different parameters such as initial Cr (VI) concentrations (25, 50, and 100mg/L), flow rate (0.5, 0.75, and 1 mL/min), and bed depth (8, 16, and 24 cm) on Cr (VI) biosorption were investigated. The breakthrough data obtained for Cr (VI) removal was more adequately described by the Clark and Yan model with high correlation coefficients (R2 = 0,996). According to the results obtained, fixed bacterial biomass was estimated as possible biosorbent for removal of chromium (VI) from aqueous solutions in a dynamic process.
- 1 April 2019
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 800, 151-156
Biosorption of Textile Dye Red Bemacid ETL Using Activated Charcoal of Grape Marc (Oenological By-Product)
The objective of this study was the synthesis of various activated carbons from grape marc issued from oenological by-product as a biosorbent. The biosolid was then applied to remove an industrial dye (red bemacid ETL) in aqueous solution. Activation of the synthesized charcoal was carried out using a solution of zinc chloride induced by two physical methods (microwaves and heating at 300°C). The obtained materials are characterized by FTIR and SEM methods. Results from batch adsorption tests have shown that pH solution, initial dye concentration and contact time affect the adsorption mechanism. Removal of the industrial dye revealed second order kinetics, exothermic adsorption and isothermal adsorption of BET type.
- 1 April 2019
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 800, 151-156
Biosorption of Textile Dye Red Bemacid ETL Using Activated Charcoal of Grape Marc (Oenological By-Product)
The objective of this study was the synthesis of various activated carbons from grape marc issued from oenological by-product as a biosorbent. The biosolid was then applied to remove an industrial dye (red bemacid ETL) in aqueous solution. Activation of the synthesized charcoal was carried out using a solution of zinc chloride induced by two physical methods (microwaves and heating at 300°C). The obtained materials are characterized by FTIR and SEM methods. Results from batch adsorption tests have shown that pH solution, initial dye concentration and contact time affect the adsorption mechanism. Removal of the industrial dye revealed second order kinetics, exothermic adsorption and isothermal adsorption of BET type.
- 1 February 2018
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 762, 93-98
Bioremoval of Lead (II) and Cadmium (II) in Single and Multicomponent Systems Using Penicillium sp.
The biosorption of cadmium and lead by Penicillium sp. isolated from an uncontaminated soil was studied at different initial metal ions concentrations. The maximum removal yields were obtained at 5 mg/L initial metal concentration. The highest removal yields were 35.67% and 81.99% for cadmium and lead respectively in the single system. In the binary system, the removal yield increased to 90.99% and 97.48% for both metal ions at the same initial concentration. This study has also confirmed that Penicillium sp was able to grow in the presence of both metal ions at different concentrations. In addition, this study showed that Penicillium sp was more tolerant to cadmium than lead. Fungi have also shown a tolerance to high concentrations of toxic heavy metals.This study can provide useful information on the bioremoval of heavy metals such as Cd(II) and Pb(II) from wastewaters.
- 1 February 2018
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 762, 93-98
Bioremoval of Lead (II) and Cadmium (II) in Single and Multicomponent Systems Using Penicillium sp.
The biosorption of cadmium and lead by Penicillium sp. isolated from an uncontaminated soil was studied at different initial metal ions concentrations. The maximum removal yields were obtained at 5 mg/L initial metal concentration. The highest removal yields were 35.67% and 81.99% for cadmium and lead respectively in the single system. In the binary system, the removal yield increased to 90.99% and 97.48% for both metal ions at the same initial concentration. This study has also confirmed that Penicillium sp was able to grow in the presence of both metal ions at different concentrations. In addition, this study showed that Penicillium sp was more tolerant to cadmium than lead. Fungi have also shown a tolerance to high concentrations of toxic heavy metals.This study can provide useful information on the bioremoval of heavy metals such as Cd(II) and Pb(II) from wastewaters.
- 1 February 2018
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 762, 87-92
Activated Carbon Design from Sludge to Remove Red Scarlet Nylosan “F3GL” in Aqueous Solution
Activated carbon prepared from industrial wastewater treatment plant dry sludge was proven to be efficient for the removal of refractory dye red scarlet nylosan (F3GL). Mixed treatment (chemical followed by thermal) considerably improved the adsorption capacity of the sludge. Batch tests at 40 °C gave maximal adsorption capacity. Application of Langmuir model gave 434.78 mg/g for treated material (SNHC) and 169.49 mg/g for the unmodified material (S). Thermodynamic parameters indicated that the adsorption is favored by an increase of temperature. The values of the enthalpy revealed physic-sorption. The results clearly showed that the mixed treatment of the adsorbent is the most adequate for the removal of toxic substances such as dyes present in industrial wastewaters.
- 1 February 2018
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 762, 87-92
Activated Carbon Design from Sludge to Remove Red Scarlet Nylosan “F3GL” in Aqueous Solution
Activated carbon prepared from industrial wastewater treatment plant dry sludge was proven to be efficient for the removal of refractory dye red scarlet nylosan (F3GL). Mixed treatment (chemical followed by thermal) considerably improved the adsorption capacity of the sludge. Batch tests at 40 °C gave maximal adsorption capacity. Application of Langmuir model gave 434.78 mg/g for treated material (SNHC) and 169.49 mg/g for the unmodified material (S). Thermodynamic parameters indicated that the adsorption is favored by an increase of temperature. The values of the enthalpy revealed physic-sorption. The results clearly showed that the mixed treatment of the adsorbent is the most adequate for the removal of toxic substances such as dyes present in industrial wastewaters.
- 1 February 2018
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 762, 109-114
Multilayer Adsorption of Purple NR5 Industrial Dye by Aristeus antennautus Shell in Aqueous Solution
In this work, chitin-based material has been proposed for removing the purple NR5 dye in aqueous solution. The material chosen is from shrimp shell: Aristeus antennautus. This biomaterial is used as a raw form. The adsorption isotherms obtained showed a behavior of L3a indicating the passage of monolayer to multilayer adsorption. The results are well correlated with the BET model, (R²>0.99). And the maximum monolayer adsorption capacity was found to be 667.33 mg/g. The kinetic data were evaluated using pseudo first order, pseudo second order and the intraparticle diffusion models. The chemical nature of the biomaterial is confirmed by Fourier Transform infrared spectroscopy (FTIR).
- 1 February 2018
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 762, 109-114
Multilayer Adsorption of Purple NR5 Industrial Dye by Aristeus antennautus Shell in Aqueous Solution
In this work, chitin-based material has been proposed for removing the purple NR5 dye in aqueous solution. The material chosen is from shrimp shell: Aristeus antennautus. This biomaterial is used as a raw form. The adsorption isotherms obtained showed a behavior of L3a indicating the passage of monolayer to multilayer adsorption. The results are well correlated with the BET model, (R²>0.99). And the maximum monolayer adsorption capacity was found to be 667.33 mg/g. The kinetic data were evaluated using pseudo first order, pseudo second order and the intraparticle diffusion models. The chemical nature of the biomaterial is confirmed by Fourier Transform infrared spectroscopy (FTIR).
- 18 January 2018
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 16 (1) , 113-124
Effect of thermal regeneration of diatomite adsorbent on its efficacy for removal of dye from water
- 18 January 2018
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 16 (1) , 113-124
Effect of thermal regeneration of diatomite adsorbent on its efficacy for removal of dye from water
- 10 October 2017
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 267, 139-144
Bio-Waste Recovery for the Removal of Cr (VI) in Aqueous Solution: Case of the Green Alga Ulva lactuca
This work is in addition to the various works undertaken by the researchers, using biomass as adsorbent. However, the aim of this study is the recovery of a marine material alga: Ulva lactuca) that we were able to transform into adsorbent with treatment under physical carbonization and chemical activation. The ability of treated and untreated Ulvala ctuca, to remove hexavalent chromium Cr (VI) ions in aqueous solutions was investigated. The influence of pH, sorbent dose, initial concentration, temperature, and contact time has been studied in batch process. The materials are characterized by FTIR and SEM analysis. The highest Cr (VI) removals (100%) were achieved at pH of 3, particle size of less than 250μm, dose of 1 g/L, and equilibrium time of 180 minutes. Thermodynamic results indicated that the Cr (VI) adsorption process was spontaneous and exothermic. The adsorption data fit well with Langmuir isotherm model with a maximum adsorption capacities (qmax) of untreated and treated Ulva lactuca were between 0.6 and 2 mg/g. Higher Cr (VI) removal revealed the practical applicability of Ulva lactuca in water and wastewater treatment systems.
- 10 October 2017
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 267, 139-144
Bio-Waste Recovery for the Removal of Cr (VI) in Aqueous Solution: Case of the Green Alga Ulva lactuca
This work is in addition to the various works undertaken by the researchers, using biomass as adsorbent. However, the aim of this study is the recovery of a marine material alga: Ulva lactuca) that we were able to transform into adsorbent with treatment under physical carbonization and chemical activation. The ability of treated and untreated Ulvala ctuca, to remove hexavalent chromium Cr (VI) ions in aqueous solutions was investigated. The influence of pH, sorbent dose, initial concentration, temperature, and contact time has been studied in batch process. The materials are characterized by FTIR and SEM analysis. The highest Cr (VI) removals (100%) were achieved at pH of 3, particle size of less than 250μm, dose of 1 g/L, and equilibrium time of 180 minutes. Thermodynamic results indicated that the Cr (VI) adsorption process was spontaneous and exothermic. The adsorption data fit well with Langmuir isotherm model with a maximum adsorption capacities (qmax) of untreated and treated Ulva lactuca were between 0.6 and 2 mg/g. Higher Cr (VI) removal revealed the practical applicability of Ulva lactuca in water and wastewater treatment systems.
- 10 October 2017
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 267, 132-138
Characterization and Recycling of a Low-Coast Derivative Iron Hydroxide Adsorbent
This work presents the possible recovery and reuse, after treatment, of an iron-based sludge from wastewater treatment station in the removal of cadmium in aqueous solution. The sludge sustained a heat treatment (100 and 500°C) and was characterized by XRD, FTIR, BET and SEM witch shown an evolution in the morphology and the structure of the materials indicating the effect of the heat temperature. The material was then applied to remove cadmium in aqueous solution. The results show that the raw material gives the best results with a maximal adsorption capacity of 70.92 mg/g at pH=5.This study has shown us that it is possible to recover and reuse effectively sludge, from wastewater treatment plant, considered as a solid waste, in the removal of a pollutant such as cadmium in aqueous solution.
- 10 October 2017
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 267, 132-138
Characterization and Recycling of a Low-Coast Derivative Iron Hydroxide Adsorbent
This work presents the possible recovery and reuse, after treatment, of an iron-based sludge from wastewater treatment station in the removal of cadmium in aqueous solution. The sludge sustained a heat treatment (100 and 500°C) and was characterized by XRD, FTIR, BET and SEM witch shown an evolution in the morphology and the structure of the materials indicating the effect of the heat temperature. The material was then applied to remove cadmium in aqueous solution. The results show that the raw material gives the best results with a maximal adsorption capacity of 70.92 mg/g at pH=5.This study has shown us that it is possible to recover and reuse effectively sludge, from wastewater treatment plant, considered as a solid waste, in the removal of a pollutant such as cadmium in aqueous solution.
- Open Access
- 1 September 2016
- Published by Springer Nature in Journal of Saudi Chemical Society
- Vol. 20, S241-S249
Alkaline treatment of timber sawdust: A straightforward route toward effective low-cost adsorbent for the enhanced removal of basic dyes from aqueous solutions
- 1 September 2016
- Published by Springer Nature in Journal of Saudi Chemical Society
- Vol. 20, S241-S249
Open AccessAlkaline treatment of timber sawdust: A straightforward route toward effective low-cost adsorbent for the enhanced removal of basic dyes from aqueous solutions