ABAndreas Brotzer

Andreas Brotzer

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Andreas Brotzer has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Direction monitoring of secondary microseismic noise for Love and Rayleigh waves with a single six-degree-of-freedom station

    by Andreas Brotzer, Heiner Igel, Felix Bernauer, Joachim Wassermann, Céline Hadziioannou, Karl Ulrich Schreiber

    SUMMARY: Knowing and monitoring the spatial distribution of ambient seismic noise sources is essential for correlation-based investigations in seismology. The omnipresent primary and secondary microseismic noise characterizes the ocean-generated noise of the seismic spectrum and has been studied through observations and modelling to better constrain the source mechanisms, the source regions, and their temporal variability. In this study, we demonstrate the potential of a single six-degree-of-freedom (6-DoF) station, observing co-located translational and rotational ground motions, to determine and continuously monitor the source directions of the secondary microseismic wavefield. We harness direct rotational ground motion data obtained with the ROtational Motions in seismologY ring laser array. The effective array-like capability of a single 6-DoF station to separate Love and Rayleigh waves, both constituents of the secondary microseismic wavefield, by their polarization enables the independent estimation of the dominant source directions and the monitoring of their seasonal evolution. An anticipated seasonality is evident, with a dominant source direction for Love (254°) and Rayleigh (277°) waves in winter, whereas in summer no clear dominant direction emerges due to an absence of strong nearby sources. We compare 6-DoF-based backazimuth estimates with those of seismic array beamforming and find close agreement concerning the dominant source directions, particularly in the case of migrating pelagic storms in the North Atlantic associated with strong ocean wave activity over several days. In winter, a systematic bias of about 25° to 35° for Rayleigh waves and 50° for Love waves is identified between the 6-DoF-based backazimuth estimates and those inferred for significant wave heights obtained from satellite altimetry and model-based seismic noise source maps. Our results provide a proof-of-concept for the direction monitoring of the secondary microseismic noise for both Love and Rayleigh waves using direct rotational observations, thereby reducing reliance on array-based estimates. The advent of portable high-sensitive rotation sensors will facilitate constraining spatial seismic noise source distributions and temporal variations therein with future 6-DoF station networks potentially replacing or complementing traditional seismic array deployments.

  • Open Access

    Ultra-high performance gyroscopes for future X-ray interferometer missions

    by Andreas Brotzer, Felix Bernauer, Frédéric Guattari, Leszek R. Jaroszewicz, Anna T. Kurzych, Carlos L. Garrido Alzar, Arnaud Landragin, Damien Piot, Sebastien De Raucourt

    X-ray interferometry holds the potential to image astronomical objects with unprecedented, microarcsecond (μas) resolution, where 1 μas corresponds to 4.8 prad. This target resolution imposes extreme requirements for the accuracy of the spacecraft‘s attitude measurement when operating the X-ray interferometer.Typically, the orientation of the spacecraft is measured using three single-axis gyroscopes that measure the Euler angles (yaw, pitch and roll) in a spacecraft-fixed coordinate frame. These measurements can be complemented by a star tracker as an absolute reference. Gyroscopes that are capable of determining the orientation with the required accuracy and stability needs to outperform the current high-performance navigation-grade gyroscopes by several orders of magnitude.High-accuracy rotation angle and rotation rate measurements become increasingly important in many scientific fields: (1) Seismologists want to observe the local rotation from elastic and non-elastic deformation caused by earthquakes to fully observe the seismic wavefield. (2) The next generation of gravitational wave detectors relies on high-precision rotation measurements for enhanced active seismic noise isolation and Newtonian noise mitigation. (3) Geodesists want to measure the Earth’s rotation rate and its variations with Earth-bound instruments. All these applications require gyroscopes with a sensitivity in the range of 1 prad/s/√Hz to 1 nrad/s/√Hz, covering a frequency range from below 0.01 Hz to up to 100 Hz.This contribution presents (1) a compilation of requirements for a sensor suite to comply with the mission needs, (2) an assessment of the state-of-the-art gyroscope technologies (e.g. fiber-optic gyroscopes, ring-laser gyroscopes, cold atom gyroscopes and mechanical gyroscopes), comprising their scaling parameters as well as technological gaps, and (3) a road map to an ultra-high performance sensor suite for 2030+.

  • Open Access

    On environment-related instrumental effects of ROMY (ROtational Motions in seismologY): A prototype, multi-component, heterolithic ring laser array

    by Andreas Brotzer, Heiner Igel, Felix Bernauer, Joachim Wassermann, Jan Kodet, Karl Ulrich Schreiber, Jannik Zenner, Simon Stellmer

    Large-scale ring laser gyroscopes (RLGs) are essential scientific instruments to study a variety of geophysical phenomena. The first and so far only large-scale RLG array ROMY (ROtational Motions in seismologY) comprises four triangular, heterolithic, active RLGs and can provide high-quality, three-component rotational ground motion observations. Compared to other RLGs, often being located in underground laboratories, ROMY is a near-surface installation that is more exposed to environmental influences. The prototype design of ROMY could serve as a blueprint for high-sensitivity, six degree-of-freedom stations for geoscientific rotation sensing. Understanding and quantifying instrumental effects caused by its environment is, therefore, essential to enhance the design toward a stable and continuous operation. Geometric deformation of a heterolithic optical ring resonator introduces undesired instrumental drifts that are challenging to mitigate. Applying a classic correction for backscatter-induced errors, we achieve a reduction in short-term Sagnac frequency fluctuations of several millihertz. A new sensor network inside ROMY monitors key environmental parameters such as barometric pressure and temperature. In order to quantify deformation of the resonator, we use camera-based beam tracking and free spectral range measurements. Based on these observations, we discuss the current operational stability of ROMY and recovery methods. We relate the observed instrumental drifts to dominant environmental drivers. Using a linear, multivariate modeling approach, we can identify dominant drivers and reduce long-term drifts of the Sagnac frequency. A quantification and better understanding of environment-induced instrumental effects allows to develop strategies for a further improvement in operational stability.


  • Open Access

    On the influence of ambient atmospheric pressure on multi-component, direct observations of rotational ground motion

    by Andreas Brotzer, Rudolf Widmer-Schnidrig, Heiner Igel

    A high-sensitive, large-scale ring laser gyroscope provides access to direct observations of local rotational ground motions. A tetrahedral configuration of ring laser gyroscopes, such as ROMY (ROtational Motions in seismologY), located in a Geophysical Observatory near Munich, Germany, enables to redundantly observe all three components of the rotation vector.For seismic accelerations below 30 mHz, the separation of low noise background levels between vertical and horizontal component are well established and understood to result from local tilts driven by atmospheric pressure variations. The promise of multi-component rotational observations is that ideally they can be used to decontaminate a co-located horizontal component acceleration sensor from contributions of ground tilt. Moreover, knowing and understanding the background levels for vertical and horizontal rotational ground motions at long periods is essential as benchmarks for instrument development towards higher sensitivity.We use several months of multi-component data of vertical and horizontal rotation rates by ROMY and a co-located atmospheric pressure sensor to derive the pressure compliance for both vertical and horizontal rotational motions. Focusing on frequencies below 20 mHz, we find that time windows with energetic weather patterns consistently lead to high coherence of atmospheric pressure and horizontal rotations, but only little coherence between the atmospheric pressure and vertical rotation. We consider this as a first indication that atmospheric pressure induced ground tilts are detected by the ROMY horizontal components. Different effects of ambient atmospheric pressure changes on the optical gyroscope itself, such as cavity deformation, are discussed. A small aperture barometer array surrounding ROMY to detect lateral pressure gradients is currently being deployed to provide additional constraints on ground deformations from atmospheric pressure waves.Here we focus on a detailed analysis of ROMY gyroscope data, while accelerometer data are analyzed in a companion poster by Widmer-Schnidrig et al. in this same session SM3.3.

  • Open Access

    Rotation sensing with fibre optic technology

    by Heiner Igel, Felix Bernauer, Andreas Brotzer, Joachim Wassermann, Fabian Lindner, Frank Vernon

    Fibre-optic gyros (FOG) allow measuring rotational ground motions and have recently been the method of choice for a first-generation broadband sensor for seismology. FOGs have a unity transfer function, are insensitive to translations and – combined with broadband seismometers – allow exploiting the power of six-degree-of-freedom processing (6 DoF) methods. This includes phase separation, backazimuth and phase velocity estimation as well as tilt-correction. Recently, a permanent 6 DoF system has been installed at the Pinon Flat Observatory, California. We report on the observation of local seismicity and the detection limit of a commercial FOG. Furthermore we present results on 6 DoF observations on volcanoes, the estimation of 1D velocity models based on 6 DoF noise observations, and applications in structural health monitoring. Finally, we discuss the current limits of portable rotation instrument, and the future potential of 6 DoF sensing when the sensitivity is improved.

  • Open Access

    What we learn from multi-component, direct observations of rotational ground motions about atmospheric ground deformation processes

    by Andreas Brotzer, Heiner Igel, Rudolf Widmer-Schnidrig

    A high-sensitive, large-scale optical Sagnac gyroscope provides access to direct observations of the rotational part of the gradient of the seismic wavefield. A tetrahedral configuration of optical Sagnac gyroscopes, such as ROMY (ROtational Motions in seismologY), located in a Geophysical Observatory near Munich, Germany, enables to redundantly observe all three components of the curl of the displacement field.For seismic accelerations below 30 mHz, the separation of low noise background levels between vertical and horizontal component are well established and understood to result from local tilts driven by atmospheric pressure variations. The promise of multi-component rotational observations is that ideally they can be used to decontaminate a co-located horizontal component acceleration sensor from contributions of ground tilt. Moreover, knowing and understanding the background levels for vertical and horizontal rotational ground motions at long periods can refine our current understanding of the low noise model for ground motions and is essential as a benchmark for instrument development.We use several months of multi-component data of vertical and horizontal rotation rates by ROMY and a co-located atmospheric pressure sensor to derive the pressure compliance for both vertical and horizontal rotational motions. Focusing on frequencies below 20 mHz, we find that time windows with energetic weather patterns consistently lead to high coherence of atmospheric pressure and horizontal rotations, but only little coherence between the atmospheric pressure and vertical rotation.We consider this as a first indication that atmospheric pressure induced ground tilts are detected by the ROMY horizontal components. Different effects of ambient atmospheric pressure changes on the optical gyroscope itself, such as cavity deformation, are discussed. A small aperture barometer array surrounding ROMY provides observations of lateral pressure gradients to provide additional constraints on ground deformations from atmospheric pressure waves.

  • Characterizing the Background Noise Level of Rotational Ground Motions on Earth

    by Andreas Brotzer, Heiner Igel, Eléonore Stutzmann, Jean-Paul Montagner, Felix Bernauer, Joachim Wassermann, Rudolf Widmer-Schnidrig, Chin-Jen Lin, Sergey Kiselev, Frank Vernon, et al.

    The development of high-sensitive ground-motion instrumentation for Earth and planetary exploration is governed by so-called low-noise models, which characterize the minimum level of physical ground motions, observed across a very broad frequency range (0.1 mHz–100 Hz). For decades, broadband instruments for seismic translational ground-motion sensing allowed for observations down to the Earth’s low-noise model. Knowing the lowermost noise level distribution across frequencies enabled not only to infer characteristics of Earth such as the ocean microseismic noise (microseisms) and seismic hum, but also to develop highly successful ambient seismic noise analysis techniques in seismology. Such a low-noise model currently does not exist for rotational ground motions. In the absence of a substantial observational database, we propose a preliminary rotational low-noise model (RLNM) for transverse rotations based on two main wavefield assumptions: the frequency range under investigation is dominated by surface-wave energy, and the employed phase velocity models for surface waves are representative. These assumptions hold, in particular, for a period range of about 2–50 s and lose validity towards long periods when constituents produced by atmospheric pressure dominate. Because noise levels of vertical and horizontal accelerations differ, we expect also different noise levels for transverse and vertical rotations. However, at this moment, we propose a common model for both types of rotations based on the transverse RLNM. We test our RLNM against available direct observations provided by two large-scale ring lasers (G-ring and ROMY) and array-derived rotations (Piñon Flats Observatory array, Gräfenberg array, and ROMY array). We propose this RLNM to be useful as guidance for the development of high-performance rotation instrumentation for seismic applications in a range of 2–50 s. Achieving broadband sensitivity below such a RLNM remains a challenging task, but one that has to be achieved.


  • Open Access

    Observing and analysing seismicity with a permanet 6C station

    by Andreas Brotzer, Heiner Igel, Felix Bernauer, Joachim Wassermann, Robert Mellors, Frank Vernon

    In September 2022, a three-component rotational rate sensor (blueSeis-3A) provided by IRIS has been deployed at the underground vault of the Piñon Flat Observatory (PFO) near San Diego in California. A three-component broadband seismometer (Trillium 240s) is co-located on the granite pier, creating a 6C station for permanent observations of local and regional seismicity and wavefield studies. The permanent record is streamed online via IRIS and freely available with all required metadata (station: BlueSeis at Pinon Flat = BSPF). Additionally, the site offers observations of strain by optical fiber and vacuum laser strainmeters at PFO, allowing to study 7 components of the seismic wavefield in a quiet area with regard to seismic noise, but high seismicity (e.g. San Andreas fault zone, San Jacinto fault zone). Such a setup enables advanced studies of the seismic wavefield. Dense, large-N nodal experiments, temporarily deployed around PFO could provide dense sampling of the seismic wavefield for comparison studies. The seismic array of borehole sensors at PFO is well designed to compute array derived rotations with enables a direct comparison with the rotational record and applied methods. Moreover, the array is employed to compare array analysis with 6C methods (e.g. backazimuth estimation, wavefield separation, source tracking, local subsurface velocity changes). We present characteristics on the 6C station and preliminary analysis results.

  • Open Access

    Automated Quality Assessment of Interferometric Ring Laser Data

    by Andreas Brotzer, Felix Bernauer, Karl Ulrich Schreiber, Joachim Wassermann, Heiner Igel

    In seismology, an increased effort to observe all 12 degrees of freedom of seismic ground motion by complementing translational ground motion observations with measurements of strain and rotational motions could be witnessed in recent decades, aiming at an enhanced probing and understanding of Earth and other planetary bodies. The evolution of optical instrumentation, in particular large-scale ring laser installations, such as G-ring and ROMY (ROtational Motion in seismologY), and their geoscientific application have contributed significantly to the emergence of this scientific field. The currently most advanced, large-scale ring laser array is ROMY, which is unprecedented in scale and design. As a heterolithic structure, ROMY’s ring laser components are subject to optical frequency drifts. Such Sagnac interferometers require new considerations and approaches concerning data acquisition, processing and quality assessment, compared to conventional, mechanical instrumentation. We present an automated approach to assess the data quality and the performance of a ring laser, based on characteristics of the interferometric Sagnac signal. The developed scheme is applied to ROMY data to detect compromised operation states and assign quality flags. When ROMY’s database becomes publicly accessible, this assessment will be employed to provide a quality control feature for data requests.


  • Open Access

    ROMY: A Multi-Component Ring Laser for Geodesy and Geophysics

    by Heiner Igel, Ulrich K Schreiber, Andre Gebauer, Felix Bernauer, Sven Egdorf, Andrea Simonelli, Chin-Jen Lin, Joachim Wassermann, Stefanie Donner, Celine Hadziioannou, et al.

    Single-component ring lasers have provided high-resolution observations of Earth's rotation rate as well as local earthquake- or otherwise-induced rotational ground motions. Here we present the design, construction, and operational aspects of ROMY, a four-component, tetrahedral-shaped ring laser installed at the Geophysical Observatory Fürstenfeldbruck near Munich, Germany. Four equilateral, triangular-shaped ring lasers with 12 m side length provide rotational motions that can be combined to construct the complete vector of Earth's rotation from a point measurement with very high resolution. Combined with a classic broadband seismometer we obtain the most accurate 6 degree-of-freedom ground motion measurement system to date, enabling local and teleseismic observations as well as the analysis of ocean-generated Love and Rayleigh waves. The specific design and construction details are discussed as are the resulting consequences for permanent observations. We present seismic observations of local, regional, and global earthquakes as well as seasonal variations of ocean-generated rotation noise. The current resolution of polar motion is discussed and strategies how to further improve long-term stability of the multi-component ring-laser system are presented.