M. Francis Luther King
Research Subjects
Research Interests
M. Francis Luther King has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Arputham Arul Jeya Kumar
SRM Institute of Science and Technology
3 shared publications V. Srinivasan
2 shared publications- B. Prabu
Department of Mechanical Engineering, Puducherry Technological University, Puducherry, India
1 shared publication - Elias Uddin
Department of Leather Engineering, Faculty of Mechanical Engineering, Khulna University of Engineering and Technology, Khulna, Bangladesh
1 shared publication - Moganapriya Chinnasamy
School of Mechanical Engineering, Vellore Institute of Technology, Chennai, India
1 shared publication N. Mani
1 shared publication
Latest Publications
- 30 June 2023
- Published by IGI Global Scientific Publishing
- p. 102-129
Applications of Nanoparticles in the Cosmetic Field
Nanotechnology is a cutting-edge scientific discipline that focuses on manipulating matter at the nanoscale scale to create new and useful materials, gadgets, and systems (1–100 nm). One of the most rapidly expanding, and commercially viable niches in the cosmetics industry is the use of micellar nanoparticles in these products. The improved qualities of the nano-sized particles in terms of colour, transparency, solubility, etc., are largely responsible for the extensive impact of nanotechnology in the cosmetics sectors. Cosmetics use a wide variety of nano materials, including nanosomes, liposomes, fullerenes, solid lipid nanoparticles, etc. Recent worries about the potential dangers of nano cosmetics have prompted the cosmetics industry to restrict the use of nanotechnology in cosmetics and push for stricter regulations requiring a thorough safety review of the products before they hit store shelves. This chapter looks at the latest developments in nano-sized materials for use in cosmetics in an effort to address these problems despite the not-so-obvious hidden hazards.
- 30 June 2023
- Published by IGI Global Scientific Publishing
- p. 102-129
Applications of Nanoparticles in the Cosmetic Field
Nanotechnology is a cutting-edge scientific discipline that focuses on manipulating matter at the nanoscale scale to create new and useful materials, gadgets, and systems (1–100 nm). One of the most rapidly expanding, and commercially viable niches in the cosmetics industry is the use of micellar nanoparticles in these products. The improved qualities of the nano-sized particles in terms of colour, transparency, solubility, etc., are largely responsible for the extensive impact of nanotechnology in the cosmetics sectors. Cosmetics use a wide variety of nano materials, including nanosomes, liposomes, fullerenes, solid lipid nanoparticles, etc. Recent worries about the potential dangers of nano cosmetics have prompted the cosmetics industry to restrict the use of nanotechnology in cosmetics and push for stricter regulations requiring a thorough safety review of the products before they hit store shelves. This chapter looks at the latest developments in nano-sized materials for use in cosmetics in an effort to address these problems despite the not-so-obvious hidden hazards.
- Open Access
- 29 December 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-11
Acrylic Rubber-Reinforced Halloysite Nanotubes/Carbon Black Hybrid Fillers for Oil Seal Applications: Thermal Stability and Dynamic Mechanical Properties
In this study, we show that adding halloysite nanotubes (HNT) to carbon black (CB)-packed acrylic rubber (ACM) composites improves their thermal properties. The thermo-oxidative stability, thermal stability, and dynamic mechanical properties of ACM composites (filled simply with 70phr CB) and ACM hybrid composites comprising a fixed amount of CB (60phr) and a variable amount of halloysite nanotubes (HNT) (2, 4, 6, 8, and 10phr) were investigated. As evidenced by the oxidation induction time analysis, hybrid structures support a higher degree of antioxidation in composites reinforced with twin fillers than composites reinforced just with CB. ACM composites with dual fillers had greater breakdown temperatures (temperatures at 10 weight loss (T10) and 50 weight loss (T50)) and char residue concentration at 600°C than ACM conventional composites, according to thermogravimetric tests. The activation energy of the thermal disintegration of ACM composites, as determined by the Kissinger and FlynnWallOzawa techniques, shows that the addition of HNT improves the thermal stability of ACM composites. The storage modulus of ACM composites was increased by 79 percent at 30°C when 10phr of black filler was replaced with 6phr of tubular HNT, according to additional viscoelastic experiments.
- 29 December 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-11
Open AccessAcrylic Rubber-Reinforced Halloysite Nanotubes/Carbon Black Hybrid Fillers for Oil Seal Applications: Thermal Stability and Dynamic Mechanical Properties
In this study, we show that adding halloysite nanotubes (HNT) to carbon black (CB)-packed acrylic rubber (ACM) composites improves their thermal properties. The thermo-oxidative stability, thermal stability, and dynamic mechanical properties of ACM composites (filled simply with 70phr CB) and ACM hybrid composites comprising a fixed amount of CB (60phr) and a variable amount of halloysite nanotubes (HNT) (2, 4, 6, 8, and 10phr) were investigated. As evidenced by the oxidation induction time analysis, hybrid structures support a higher degree of antioxidation in composites reinforced with twin fillers than composites reinforced just with CB. ACM composites with dual fillers had greater breakdown temperatures (temperatures at 10 weight loss (T10) and 50 weight loss (T50)) and char residue concentration at 600°C than ACM conventional composites, according to thermogravimetric tests. The activation energy of the thermal disintegration of ACM composites, as determined by the Kissinger and FlynnWallOzawa techniques, shows that the addition of HNT improves the thermal stability of ACM composites. The storage modulus of ACM composites was increased by 79 percent at 30°C when 10phr of black filler was replaced with 6phr of tubular HNT, according to additional viscoelastic experiments.
- 2 July 2018
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 53 (1) , 33-43
Mechanical characterization of polylactic acid reinforced bagasse/basalt hybrid fiber composites
This paper focuses on the mechanical behavior of Polylatic acid reinforced Basalt and Bagasse fibers. The most important aspect in formulating this hybrid composite with better mechanical properties is the optimization of interfacial bonding between the reinforcing bagasse fiber and basalt fiber and polymer matrix. The composite of different weight proportion of the materials is compounded using twin screw extruder. The specimens were prepared by injection molding and subjected to various mechanical testing under tensile, flexural, and impact loads. It was found that 84 wt% of polylactic acid, 12 wt% of Basalt fiber and 4 wt% of Bagasse fiber composite exhibits better mechanical properties compared to other composites taken for study in this research. The better tensile, flexural, and impact strength of 52.8 MPa, 82.2 MPa, and 3.39 KJ/m2 were observed. The results show that the fiber content in weight percentage is playing a major than the fiber length on the improvement of tensile, flexural, and impact properties. The mechanical behavior obtained through experiments witnessed that Bagasse/Basalt fiber reinforcement in polylactic acid composites can be used as medium-load applications because of its low cost and ease of decomposability. The scanning electron microscope photography of the tested specimens shows better interfacial bonding between matrix and fibers. Also, the water absorption test indicates increase in fiber content increases the water absorption rate, reveals good degradation property of the composite. Additionally, the use of Bagasse fiber promotes the degradation of the material after its life time.
- 2 July 2018
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 53 (1) , 33-43
Mechanical characterization of polylactic acid reinforced bagasse/basalt hybrid fiber composites
This paper focuses on the mechanical behavior of Polylatic acid reinforced Basalt and Bagasse fibers. The most important aspect in formulating this hybrid composite with better mechanical properties is the optimization of interfacial bonding between the reinforcing bagasse fiber and basalt fiber and polymer matrix. The composite of different weight proportion of the materials is compounded using twin screw extruder. The specimens were prepared by injection molding and subjected to various mechanical testing under tensile, flexural, and impact loads. It was found that 84 wt% of polylactic acid, 12 wt% of Basalt fiber and 4 wt% of Bagasse fiber composite exhibits better mechanical properties compared to other composites taken for study in this research. The better tensile, flexural, and impact strength of 52.8 MPa, 82.2 MPa, and 3.39 KJ/m2 were observed. The results show that the fiber content in weight percentage is playing a major than the fiber length on the improvement of tensile, flexural, and impact properties. The mechanical behavior obtained through experiments witnessed that Bagasse/Basalt fiber reinforcement in polylactic acid composites can be used as medium-load applications because of its low cost and ease of decomposability. The scanning electron microscope photography of the tested specimens shows better interfacial bonding between matrix and fibers. Also, the water absorption test indicates increase in fiber content increases the water absorption rate, reveals good degradation property of the composite. Additionally, the use of Bagasse fiber promotes the degradation of the material after its life time.
- 1 March 2018
- Published by American Scientific Publishers in Journal of Advanced Microscopy Research
- Vol. 13 (1) , 92-100
Investigation of Thermal Properties on Bagasse/Basalt Fiber Reinforced Poly Lactic Acid Hybrid Composites
This paper aims on reinforcing poly lactic acid with Bagasse and Basalt fiber. Sugarcane Bagasse fiber was treated with NaOH and ground to extract short fibers. Poly(Lactic acid)/Basalt Fiber/Sugarcane Bagasse fiber [P/BF/BG] hybrid composites were prepared using melt compounding using twin screw extruder followed by Injection molding. Thermal stability of chemically modified Bagasse/Basalt fibers and PLA composites reinforced with 4 wt%, 5 wt%, 6 wt% and 7 wt%. Were studied. The thermal Properties of PLA Composites were assessed using differential scanning Calorimetry [DSC], Thermo gravimetric analysis [TGA] and scanning electron Microscopy [SEM]. The optimum weight percentage of basalt fiber and Bagasse fiber in PLA composites was found to be 84 wt%, 12 wt% and 4 wt% respectively. Better interfacial boning between fiber and matrix was evidenced by increased thermal stability of composites due to incorporation of fiber. Crystallization and melting behaviour of PLA composites were studied in the temperature range from 30 °C to 170 °C. Crystallization temperature and Crystallization enthalpy increase up to 12 wt%, 4 wt% of Basalt/Bagasse fiber content and gradually decreased with further decrease of Basalt fiber.
- 1 March 2018
- Published by American Scientific Publishers in Journal of Advanced Microscopy Research
- Vol. 13 (1) , 92-100
Investigation of Thermal Properties on Bagasse/Basalt Fiber Reinforced Poly Lactic Acid Hybrid Composites
This paper aims on reinforcing poly lactic acid with Bagasse and Basalt fiber. Sugarcane Bagasse fiber was treated with NaOH and ground to extract short fibers. Poly(Lactic acid)/Basalt Fiber/Sugarcane Bagasse fiber [P/BF/BG] hybrid composites were prepared using melt compounding using twin screw extruder followed by Injection molding. Thermal stability of chemically modified Bagasse/Basalt fibers and PLA composites reinforced with 4 wt%, 5 wt%, 6 wt% and 7 wt%. Were studied. The thermal Properties of PLA Composites were assessed using differential scanning Calorimetry [DSC], Thermo gravimetric analysis [TGA] and scanning electron Microscopy [SEM]. The optimum weight percentage of basalt fiber and Bagasse fiber in PLA composites was found to be 84 wt%, 12 wt% and 4 wt% respectively. Better interfacial boning between fiber and matrix was evidenced by increased thermal stability of composites due to incorporation of fiber. Crystallization and melting behaviour of PLA composites were studied in the temperature range from 30 °C to 170 °C. Crystallization temperature and Crystallization enthalpy increase up to 12 wt%, 4 wt% of Basalt/Bagasse fiber content and gradually decreased with further decrease of Basalt fiber.
- 1 March 2018
- Published by American Scientific Publishers in Journal of Advanced Microscopy Research
- Vol. 13 (1) , 118-124
An Investigation on the Mechanical Properties of Nano-Al2O3 and TiC Reinforced Aluminum Matrix Hybrid Composites
Over the last two decades, the use of Al 6061 alloy with different materials as a Metal Matrix Composites has huge outcomes with required properties. In this speculation Al alloy (Al 6061) as the base material, Alumina nano Al2O3 (20 to 30 nm) at 5% weightage and titanium carbide TiC (2 microns) at different weights from 0 to 3.5%. In the present work, an attempt is made to fabricate Al 6061 hybrid composites. The composites were prepared using stir casting method the prepared composites are subjected to micro structural studies and mechanical properties of the composites were evaluated as per the ASTM standards. The micrographs of the composites revealed the fair distribution of the particles in composites with clustering in few places. The dispersed Al2O3 and TiC in Al 6061 alloy contributed in enhancing the flexural and impact strength of the composites. The scanning electron micrographs of the samples indicated the uniform distribution of the reinforcement particles in the matrix without any voids.
- 1 March 2018
- Published by American Scientific Publishers in Journal of Advanced Microscopy Research
- Vol. 13 (1) , 118-124
An Investigation on the Mechanical Properties of Nano-Al2O3 and TiC Reinforced Aluminum Matrix Hybrid Composites
Over the last two decades, the use of Al 6061 alloy with different materials as a Metal Matrix Composites has huge outcomes with required properties. In this speculation Al alloy (Al 6061) as the base material, Alumina nano Al2O3 (20 to 30 nm) at 5% weightage and titanium carbide TiC (2 microns) at different weights from 0 to 3.5%. In the present work, an attempt is made to fabricate Al 6061 hybrid composites. The composites were prepared using stir casting method the prepared composites are subjected to micro structural studies and mechanical properties of the composites were evaluated as per the ASTM standards. The micrographs of the composites revealed the fair distribution of the particles in composites with clustering in few places. The dispersed Al2O3 and TiC in Al 6061 alloy contributed in enhancing the flexural and impact strength of the composites. The scanning electron micrographs of the samples indicated the uniform distribution of the reinforcement particles in the matrix without any voids.
- 1 March 2018
- Published by American Scientific Publishers in Journal of Advanced Microscopy Research
- Vol. 13 (1) , 85-91
Investigation of Mechanical Behaviour on Bagasse/Basalt Reinforced Poly Lactic Acid Hybrid Composites: Tensile, Flexural, Impact and Water Absorption
The word 'green' affixed with materials that refer to those materials which are biodegradable and renewable addresses the sustainability, compatibility and environmental impact. Apart from most of the advantages of polymeric materials, biodegrability of natural fibers is considered as the most important and interesting aspect in recent research activities. This paper focus on the mechanical behaviour of Poly Latic acid reinforced Basalt and Bagasse fibers. The composite of different weight proportion of PLA, BS, and BG were compounded using twin screw extruder. The specimens were prepared by injection moulding and subjected to mechanical testing like tensile, flexural, and impact loads. It was found that 84 wt% of PLA, 12 wt% of Basalt fiber and 4 wt% of Bagasse fiber composite exhibits better mechanical properties compared to other composites. The SEM images show better interfacial bonding between matrix and fibers. The water absorption test indicates increase in fiber content increases the water absorption rate, reveals good degradation property of the composite.
- 1 March 2018
- Published by American Scientific Publishers in Journal of Advanced Microscopy Research
- Vol. 13 (1) , 85-91
Investigation of Mechanical Behaviour on Bagasse/Basalt Reinforced Poly Lactic Acid Hybrid Composites: Tensile, Flexural, Impact and Water Absorption
The word 'green' affixed with materials that refer to those materials which are biodegradable and renewable addresses the sustainability, compatibility and environmental impact. Apart from most of the advantages of polymeric materials, biodegrability of natural fibers is considered as the most important and interesting aspect in recent research activities. This paper focus on the mechanical behaviour of Poly Latic acid reinforced Basalt and Bagasse fibers. The composite of different weight proportion of PLA, BS, and BG were compounded using twin screw extruder. The specimens were prepared by injection moulding and subjected to mechanical testing like tensile, flexural, and impact loads. It was found that 84 wt% of PLA, 12 wt% of Basalt fiber and 4 wt% of Bagasse fiber composite exhibits better mechanical properties compared to other composites. The SEM images show better interfacial bonding between matrix and fibers. The water absorption test indicates increase in fiber content increases the water absorption rate, reveals good degradation property of the composite.
- 1 March 2018
- Published by American Scientific Publishers in Journal of Advanced Microscopy Research
- Vol. 13 (1) , 112-117
Mechanical Behaviour of Palm Seed Shell Fiber Reinforced Polymer Composites: Tensile, Flexural and Impact Properties
This study focuses on the effective utilization of natural fibers for the structural and non structural applications. Agricultural wastes can be used to prepare fiber reinforced polymer composites for commercial use. The objective is to fabricate a novel palm shell fiber reinforce epoxy polymer composites with different weight fractions. The different formulations were fabricated using hand layup method to investigate the mechanical properties of the polymer composites. The mechanical properties like Tensile, flexural and Impact properties were investigated on the fabricated specimen as per the ASTM standards. It has been reported that 60 wt% of Epoxy and 40 wt% of reinforcement showed better mechanical properties. It shows the better interfacial bonding increases due to the increase of fiber content. Better tensile, flexural and impact strength is achieved with specimen C that shows good adhesion of fibers over the matrix.
- 1 March 2018
- Published by American Scientific Publishers in Journal of Advanced Microscopy Research
- Vol. 13 (1) , 112-117
Mechanical Behaviour of Palm Seed Shell Fiber Reinforced Polymer Composites: Tensile, Flexural and Impact Properties
This study focuses on the effective utilization of natural fibers for the structural and non structural applications. Agricultural wastes can be used to prepare fiber reinforced polymer composites for commercial use. The objective is to fabricate a novel palm shell fiber reinforce epoxy polymer composites with different weight fractions. The different formulations were fabricated using hand layup method to investigate the mechanical properties of the polymer composites. The mechanical properties like Tensile, flexural and Impact properties were investigated on the fabricated specimen as per the ASTM standards. It has been reported that 60 wt% of Epoxy and 40 wt% of reinforcement showed better mechanical properties. It shows the better interfacial bonding increases due to the increase of fiber content. Better tensile, flexural and impact strength is achieved with specimen C that shows good adhesion of fibers over the matrix.