Patrick O. Saboe
Patrick O. Saboe has a total of 115 co-authors. Here are the top co-authors by number of shared publications:
- Gregg T. Beckham
Renewable Resources and Enabling Sciences Center, National Laboratory of the Rockies, Golden, USA
8 shared publications - Manish Kumar
The University of Texas at Austin
7 shared publications - Eric M. Karp
Renewable Resources and Enabling Sciences Center, National Renewable Energy Laboratory, Golden, CO, USA
6 shared publications - Eric C. D. Tan
National Laboratory of the Rockies, Golden, CO (United States)
5 shared publications - Anelia Milbrandt
National Laboratory of the Rockies (NLR), Golden, CO (United States)
4 shared publications Brittany Staie
Strategic Energy Analysis Center
4 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by National Laboratory of the Rockies
Anaerobic Digestion in Puerto Rico: Examples and Opportunities for Farms and Communities (Spanish Translation)
- 1 January 2026
- Published by National Laboratory of the Rockies
Open AccessAnaerobic Digestion in Puerto Rico: Examples and Opportunities for Farms and Communities (Spanish Translation)
- Open Access
- 1 January 2026
- Published by National Laboratory of the Rockies
Anaerobic Digestion in Puerto Rico: Examples and Opportunities for Farms and Communities
- 1 January 2026
- Published by National Laboratory of the Rockies
Open AccessAnaerobic Digestion in Puerto Rico: Examples and Opportunities for Farms and Communities
- Open Access
- 13 August 2025
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (35) , 10673-10685
Integration of metabolic and bioprocess engineering for the production of β-ketoadipic acid from glucose and xylose by Pseudomonas putida
β-Ketoadipic acid, an intermediate in aerobic microbial aromatic catabolism suitable as a monomer in performance-advantaged biopolymers, was produced at a high titer, rate, and yield from glucose and xylose in P. putida with in situ product recovery.
- 13 August 2025
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (35) , 10673-10685
Open AccessIntegration of metabolic and bioprocess engineering for the production of β-ketoadipic acid from glucose and xylose by Pseudomonas putida
β-Ketoadipic acid, an intermediate in aerobic microbial aromatic catabolism suitable as a monomer in performance-advantaged biopolymers, was produced at a high titer, rate, and yield from glucose and xylose in P. putida with in situ product recovery.
- Open Access
- 25 October 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 26 (23) , 11587-11599
Solid–liquid separation of lignocellulosic sugars from biomass by rotating ceramic disc filtration
A simple, low energy, and productive filtration method to clarify biomass hydrolysate to enable biochemical and thermochemical pathways to biofuels and biochemicals.
- 25 October 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 26 (23) , 11587-11599
Open AccessSolid–liquid separation of lignocellulosic sugars from biomass by rotating ceramic disc filtration
A simple, low energy, and productive filtration method to clarify biomass hydrolysate to enable biochemical and thermochemical pathways to biofuels and biochemicals.
- Open Access
- 2 August 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 26 (17) , 9398-9414
Liquid–liquid extraction for in situ carboxylic acid recovery via continuous membrane-based emulsion separations
A membrane-based emulsion separator can enable continuous solvent extraction in bioprocessing separations with substantially improved demulsification and mass transfer rates, including where emulsion formation is a challenge.
- 2 August 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 26 (17) , 9398-9414
Open AccessLiquid–liquid extraction for in situ carboxylic acid recovery via continuous membrane-based emulsion separations
A membrane-based emulsion separator can enable continuous solvent extraction in bioprocessing separations with substantially improved demulsification and mass transfer rates, including where emulsion formation is a challenge.
- Open Access
- 30 March 2022
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 24 (8) , 3152-3166
Recovery of low molecular weight compounds from alkaline pretreatment liquor via membrane separations
Lignin is an abundant renewable resource that is a promising substrate for upgrading to fuels and chemicals. However, lignin-rich biorefinery streams are often physically and chemically complex, and could benefit substantially from fractionation. In this work, a membrane process was developed to fractionate low molecular weight (LMW) lignin-related compounds (molecular weight (MW) < 1000 Da) from a lignin-rich, alkaline pretreated liquor (APL) prepared from pretreatment of corn stover with NaOH. The developed membrane process exhibits up to 98.5% rejection of high molecular weight (HMW) (MW > 1000 Da) species and generates a permeate stream with >80% recovery of LMW lignin-related compounds including aromatic species such as p-coumarate and ferulate, resulting in a 6-fold enrichment in LMW organic compounds relative to the crude APL. Experimental batch data were used to develop a detailed process model of an industrial scale, continuous membrane filtration system. The open-source model has several independent process inputs, such as the concentration of target compounds, feed flow rate, volume recovery, and membrane selectivity. This process model was used to show that the system has a low estimated energy demand (0.75 kW h m−3 permeate) and was used to identify primary cost drivers, including the membrane material cost. These results offer a key step towards a scalable, low energy, and cost-effective lignin MW fractionation method with implications for both improving product isolation from lignin and improving carbon yields across the biorefinery.
- 30 March 2022
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 24 (8) , 3152-3166
Open AccessRecovery of low molecular weight compounds from alkaline pretreatment liquor via membrane separations
Lignin is an abundant renewable resource that is a promising substrate for upgrading to fuels and chemicals. However, lignin-rich biorefinery streams are often physically and chemically complex, and could benefit substantially from fractionation. In this work, a membrane process was developed to fractionate low molecular weight (LMW) lignin-related compounds (molecular weight (MW) < 1000 Da) from a lignin-rich, alkaline pretreated liquor (APL) prepared from pretreatment of corn stover with NaOH. The developed membrane process exhibits up to 98.5% rejection of high molecular weight (HMW) (MW > 1000 Da) species and generates a permeate stream with >80% recovery of LMW lignin-related compounds including aromatic species such as p-coumarate and ferulate, resulting in a 6-fold enrichment in LMW organic compounds relative to the crude APL. Experimental batch data were used to develop a detailed process model of an industrial scale, continuous membrane filtration system. The open-source model has several independent process inputs, such as the concentration of target compounds, feed flow rate, volume recovery, and membrane selectivity. This process model was used to show that the system has a low estimated energy demand (0.75 kW h m−3 permeate) and was used to identify primary cost drivers, including the membrane material cost. These results offer a key step towards a scalable, low energy, and cost-effective lignin MW fractionation method with implications for both improving product isolation from lignin and improving carbon yields across the biorefinery.
- Open Access
- 18 January 2022
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 24 (3) , 1350-1361
Separation of bio-based glucaric acid via antisolvent crystallization and azeotropic drying
Glucaric acid is regarded as a top-value added compound from biomass, however, due to prevalent lactonization, the recovery of purified glucaric acid is challenging. Accordingly, an efficient method for glucaric acid separation, especially its diacid form, is necessary to facilitate its valorization. Here, we report a robust separation process that produces glucaric acid crystals from fermentation broth. This process first recovers purified monopotassium glucarate from broth and then recovers purified glucaric acid through acidification and antisolvent crystallization. Isopropanol was found to be an effective antisolvent reducing the solubility of glucaric acid while concomitantly forming an azeotrope with water. This allows solvent removal at low temperature through azeotropic drying, which avoids lactonization, and thus prevents impurities in the resulting crystals. Overall, this process was found to separate monopotassium glucarate and glucaric acid with a recovery yield of >99.9% and 71% at purities of ca. 95.6 and 98.3%, respectively. Process modeling demonstrates the ability to recycle the antisolvents IPA and acetone with >99% recovery and determined the energy input to be ∼20 MJ kg−1 for isolation of monopotassium glucarate and 714 MJ kg−1 for glucaric acid (0.06 M). The approach detailed in this work is likely applicable to the separation of other highly oxygenated bio-carboxylic acids (e.g., mevalonic acid) from fermentation broths, as well as to their recovery from abiotic reaction solutions.
- 18 January 2022
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 24 (3) , 1350-1361
Open AccessSeparation of bio-based glucaric acid via antisolvent crystallization and azeotropic drying
Glucaric acid is regarded as a top-value added compound from biomass, however, due to prevalent lactonization, the recovery of purified glucaric acid is challenging. Accordingly, an efficient method for glucaric acid separation, especially its diacid form, is necessary to facilitate its valorization. Here, we report a robust separation process that produces glucaric acid crystals from fermentation broth. This process first recovers purified monopotassium glucarate from broth and then recovers purified glucaric acid through acidification and antisolvent crystallization. Isopropanol was found to be an effective antisolvent reducing the solubility of glucaric acid while concomitantly forming an azeotrope with water. This allows solvent removal at low temperature through azeotropic drying, which avoids lactonization, and thus prevents impurities in the resulting crystals. Overall, this process was found to separate monopotassium glucarate and glucaric acid with a recovery yield of >99.9% and 71% at purities of ca. 95.6 and 98.3%, respectively. Process modeling demonstrates the ability to recycle the antisolvents IPA and acetone with >99% recovery and determined the energy input to be ∼20 MJ kg−1 for isolation of monopotassium glucarate and 714 MJ kg−1 for glucaric acid (0.06 M). The approach detailed in this work is likely applicable to the separation of other highly oxygenated bio-carboxylic acids (e.g., mevalonic acid) from fermentation broths, as well as to their recovery from abiotic reaction solutions.
- 2 June 2021
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 23 (12) , 4386-4402
Energy and techno-economic analysis of bio-based carboxylic acid recovery by adsorption
Recent works have established bio-based carboxylic acids as adaptable precursors to renewable biofuels and chemicals. However, the separation of carboxylic acids is a major energy and cost driver, accounting for 20–40% of the entire processing cost. Improved downstream separation technologies that reduce operating costs compared to conventional approaches are needed, particularly to enable bio-based commodity fuels and chemicals. Here, we combine techno-economic analysis (TEA) and an energy and environmental assessment with experimental results to compare weak-base adsorption (WBA) processes with the conventional strong ion exchange (IX) process for the recovery of the exemplary product, butyric acid. TEA indicates that WBA has the potential to reduce operating expenses from 34% to 6% relative to the selling price of butyric acid ($1.8 kg−1). Our energy analysis shows that the WBA process has 12.2-fold energy reduction and 9.2-fold GHG emission reduction compared to the conventional IX process.
- 2 June 2021
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 23 (12) , 4386-4402
Energy and techno-economic analysis of bio-based carboxylic acid recovery by adsorption
Recent works have established bio-based carboxylic acids as adaptable precursors to renewable biofuels and chemicals. However, the separation of carboxylic acids is a major energy and cost driver, accounting for 20–40% of the entire processing cost. Improved downstream separation technologies that reduce operating costs compared to conventional approaches are needed, particularly to enable bio-based commodity fuels and chemicals. Here, we combine techno-economic analysis (TEA) and an energy and environmental assessment with experimental results to compare weak-base adsorption (WBA) processes with the conventional strong ion exchange (IX) process for the recovery of the exemplary product, butyric acid. TEA indicates that WBA has the potential to reduce operating expenses from 34% to 6% relative to the selling price of butyric acid ($1.8 kg−1). Our energy analysis shows that the WBA process has 12.2-fold energy reduction and 9.2-fold GHG emission reduction compared to the conventional IX process.