Jiahui Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Jiahui Liu has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Jian Zhao
School of Technology, Beijing Forestry University
4 shared publications - Dong Zhao
School of Technology, Beijing Forestry University, Beijing 100083, China
3 shared publications Dong Zhao
School of Technology Beijing Forestry University Beijing China
2 shared publicationsXianrong Qin
Professor, Dept. of Mechanical Engineering, School of Mechanical Engineering, Tongji Univ., Shanghai 201804, China
2 shared publications- Xianrong Qin
Tongji University
2 shared publications Yuantao Sun
Department of Mechanical Engineering Tongji University Shanghai China
2 shared publications
Latest Publications
- 21 January 2026
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 49 (4) , 1430-1444
A Fatigue Short Crack Path Prediction Criterion Based on Improved Energy Release Rate
Fatigue crack path prediction is critical in structural failure analysis. However, short crack growth, influenced by microstructures, cannot be accurately predicted by conventional fracture mechanics. This study proposes a new criterion based on an improved energy release rate, incorporating a stored energy density threshold and a crack driving state function into the maximum energy release rate criterion. Using crystal plasticity constitutive relations, a numerical model for GH4169 nickel alloy is developed and validated via fatigue tests and SEM. The simulation and experimental results show that the new criterion significantly improves path prediction accuracy compared with traditional methods, especially in the prediction of the crack deflection angle at the grain boundaries, and the average deviation of the proposed criterion from the experimentally observed values is less than 5°. This enhances prediction reliability and supports structural fatigue life assessment.
- 21 January 2026
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 49 (4) , 1430-1444
A Fatigue Short Crack Path Prediction Criterion Based on Improved Energy Release Rate
Fatigue crack path prediction is critical in structural failure analysis. However, short crack growth, influenced by microstructures, cannot be accurately predicted by conventional fracture mechanics. This study proposes a new criterion based on an improved energy release rate, incorporating a stored energy density threshold and a crack driving state function into the maximum energy release rate criterion. Using crystal plasticity constitutive relations, a numerical model for GH4169 nickel alloy is developed and validated via fatigue tests and SEM. The simulation and experimental results show that the new criterion significantly improves path prediction accuracy compared with traditional methods, especially in the prediction of the crack deflection angle at the grain boundaries, and the average deviation of the proposed criterion from the experimentally observed values is less than 5°. This enhances prediction reliability and supports structural fatigue life assessment.
- 5 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-12
Thermal Spot Damage Detection and Classification Based on BS-DeepLabV3+
The accurate identification, quantitative measurement, and damage degree evaluation of thermal spot damage are key issues in photovoltaic module damage detection systems, which are of great significance for fault diagnosis and predictive maintenance of photovoltaic modules. In response to the problems of low accuracy and large model parameters in previous thermal spot damage detection methods, this study proposes an improved lightweight BS-DeepLabV3+ thermal spot detection model, and the model is based on the DeepLabV3+ semantic segmentation model, and its backbone network is improved to the optimized MobileNetV2 to reduce the number of model parameters. SENet(Squeeze and Excitation) attention mechanism is added after AtrousSpatial Pyramid Pooling(ASPP) enabling the model to adaptively select more important thermal spot feature scales and assign corresponding weights;Simultaneously incorporating BiFPN (Bi-directional Feature) into the decoder to retain edge information and suppress noise interference.The Pyramid Network module is designed to adapt to the characteristics of thermal spot damage. The experimental results show that the BS-DeepLabV3+ model proposed in this study can accurately identify thermal spot damage and detect the degree of damage. Compared with the original DeepLabV3+ model, the recognition accuracy of the BS-DeepLabV3+ model has been improved by 2.75%, and the MPA value has been improved by 4.97%. It has achieved significant improvements in key indicators such as accuracy and intersection to union ratio, while effectively reducing the number of parameters, fully verifying its superior performance and lightweight advantages in thermal spot detection tasks with different degrees of damage.
- 5 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-12
Thermal Spot Damage Detection and Classification Based on BS-DeepLabV3+
The accurate identification, quantitative measurement, and damage degree evaluation of thermal spot damage are key issues in photovoltaic module damage detection systems, which are of great significance for fault diagnosis and predictive maintenance of photovoltaic modules. In response to the problems of low accuracy and large model parameters in previous thermal spot damage detection methods, this study proposes an improved lightweight BS-DeepLabV3+ thermal spot detection model, and the model is based on the DeepLabV3+ semantic segmentation model, and its backbone network is improved to the optimized MobileNetV2 to reduce the number of model parameters. SENet(Squeeze and Excitation) attention mechanism is added after AtrousSpatial Pyramid Pooling(ASPP) enabling the model to adaptively select more important thermal spot feature scales and assign corresponding weights;Simultaneously incorporating BiFPN (Bi-directional Feature) into the decoder to retain edge information and suppress noise interference.The Pyramid Network module is designed to adapt to the characteristics of thermal spot damage. The experimental results show that the BS-DeepLabV3+ model proposed in this study can accurately identify thermal spot damage and detect the degree of damage. Compared with the original DeepLabV3+ model, the recognition accuracy of the BS-DeepLabV3+ model has been improved by 2.75%, and the MPA value has been improved by 4.97%. It has achieved significant improvements in key indicators such as accuracy and intersection to union ratio, while effectively reducing the number of parameters, fully verifying its superior performance and lightweight advantages in thermal spot detection tasks with different degrees of damage.
- Open Access
- 27 June 2025
- Published by MDPI AG in Agriculture
- Vol. 15 (13) , 1377
Effects of Different Excitation Parameters on Mechanized Harvesting Performance and Postharvest Quality of First-Crop Organic Goji Berries in Saline–Alkali Land
Efficient and low-loss harvesting methods are crucial for preserving the postharvest quality of the first crop of goji berries grown in saline–alkali soils. However, as a brittle horticultural fruit rich in diverse bioactive compounds, goji berries are highly vulnerable to mechanical damage during harvesting, which adversely affects their storability and subsequent processing. To address this challenge, a multi-degree-of-freedom vibration model was developed based on the growth characteristics of first-crop organic goji berry fruit-bearing branches in the Qinghai region. The dynamic response of the branches under various excitation conditions was simulated, and the effects of excitation position, frequency, force amplitude, and phase angle on the fruit detachment rate, impurity rate, and breakage rate were systematically analyzed. Based on both the simulation and experimental results, a response surface methodology (RSM) was employed to optimize the picking parameters. The results of the field experiment showed that under the optimal conditions of vibration excitation in the ripe fruit area, a frequency of 5.7 Hz, an amplitude of excitation force of 0.27 N, a phase angle of 135°, a fruit picking rate of 97.58%, a miscellaneous content rate of 5.12%, and a breakage rate of 7.66% could be realized. The results of this study help to maintain the postharvest quality of first-crop goji berry fruits in saline–alkali land, and also provide a theoretical basis and practical reference for the optimization of first-crop goji berry harvesting equipment.
- 27 June 2025
- Published by MDPI AG in Agriculture
- Vol. 15 (13) , 1377
Open AccessEffects of Different Excitation Parameters on Mechanized Harvesting Performance and Postharvest Quality of First-Crop Organic Goji Berries in Saline–Alkali Land
Efficient and low-loss harvesting methods are crucial for preserving the postharvest quality of the first crop of goji berries grown in saline–alkali soils. However, as a brittle horticultural fruit rich in diverse bioactive compounds, goji berries are highly vulnerable to mechanical damage during harvesting, which adversely affects their storability and subsequent processing. To address this challenge, a multi-degree-of-freedom vibration model was developed based on the growth characteristics of first-crop organic goji berry fruit-bearing branches in the Qinghai region. The dynamic response of the branches under various excitation conditions was simulated, and the effects of excitation position, frequency, force amplitude, and phase angle on the fruit detachment rate, impurity rate, and breakage rate were systematically analyzed. Based on both the simulation and experimental results, a response surface methodology (RSM) was employed to optimize the picking parameters. The results of the field experiment showed that under the optimal conditions of vibration excitation in the ripe fruit area, a frequency of 5.7 Hz, an amplitude of excitation force of 0.27 N, a phase angle of 135°, a fruit picking rate of 97.58%, a miscellaneous content rate of 5.12%, and a breakage rate of 7.66% could be realized. The results of this study help to maintain the postharvest quality of first-crop goji berry fruits in saline–alkali land, and also provide a theoretical basis and practical reference for the optimization of first-crop goji berry harvesting equipment.
- Open Access
Structural Damage Early Warning Method of Quayside Container Crane Based on Fuzzy Entropy Ratio Variation Deviation
Real-time monitoring and early warning of structures are essential for assessing structural health and ensuring safety maintenance. To improve the timeliness of early warnings for structural abnormal states in quayside container cranes (QCCs) with incomplete damage data, a structural abnormal state early warning method based on fuzzy entropy ratio variation deviation (FERVD) is proposed. First, monitoring data are subjected to dual-tree complex wavelet transform (DTCWT). The adaptive frequency bands obtained from the decomposition, combined with fuzzy entropy (FE), are used to extract response signal features and construct the FERVD warning indicator. Based on this indicator, dynamic thresholds for early warning are established to differentiate between structural health states and various damage conditions. Secondly, a finite element model of structure for QCCs is developed. By simulating damage at various locations and severities through the stiffness reduction of different elements, a comprehensive structural simulation monitoring dataset is generated. The efficacy of the proposed early warning method is validated through numerical experiments and engineering case studies. The numerical results demonstrate that the proposed method effectively distinguishes between different damage conditions and provides timely warnings for various damage states. Furthermore, engineering case analysis shows that when the structure is in a healthy state, the FERVD values at different monitoring points fluctuate within the threshold range, indicating the applicability of the proposed method in the structural health monitoring (SHM) of QCCs.
Open AccessStructural Damage Early Warning Method of Quayside Container Crane Based on Fuzzy Entropy Ratio Variation Deviation
Real-time monitoring and early warning of structures are essential for assessing structural health and ensuring safety maintenance. To improve the timeliness of early warnings for structural abnormal states in quayside container cranes (QCCs) with incomplete damage data, a structural abnormal state early warning method based on fuzzy entropy ratio variation deviation (FERVD) is proposed. First, monitoring data are subjected to dual-tree complex wavelet transform (DTCWT). The adaptive frequency bands obtained from the decomposition, combined with fuzzy entropy (FE), are used to extract response signal features and construct the FERVD warning indicator. Based on this indicator, dynamic thresholds for early warning are established to differentiate between structural health states and various damage conditions. Secondly, a finite element model of structure for QCCs is developed. By simulating damage at various locations and severities through the stiffness reduction of different elements, a comprehensive structural simulation monitoring dataset is generated. The efficacy of the proposed early warning method is validated through numerical experiments and engineering case studies. The numerical results demonstrate that the proposed method effectively distinguishes between different damage conditions and provides timely warnings for various damage states. Furthermore, engineering case analysis shows that when the structure is in a healthy state, the FERVD values at different monitoring points fluctuate within the threshold range, indicating the applicability of the proposed method in the structural health monitoring (SHM) of QCCs.
- 23 March 2022
- Published by Hindawi Limited in Structural Control and Health Monitoring
- Vol. 29 (8)
Interval early warning method for state of engineering structures based on structural health monitoring data
- 23 March 2022
- Published by Hindawi Limited in Structural Control and Health Monitoring
- Vol. 29 (8)
Interval early warning method for state of engineering structures based on structural health monitoring data
- 1 August 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Performance of Constructed Facilities
- Vol. 35 (4) , 04021031
Response Prediction Model for Structures of Quayside Container Crane Based on Monitoring Data
Structural health monitoring and response prediction are of great significance to ensure safety of structures and avoid structural failures. In order to capture changes of structural state in time and improve accuracy of the response prediction, a new predictive model based on dual-tree complex wavelet transform (DTCWT) combined with autoregressive moving average (ARMA) and support vector regression (SVR) is proposed. Firstly, structural monitoring signals are preprocessed and then decomposed by DTCWT. According to variable regulation of the signal characteristics at different scales, ARMA modeling and SVR training are carried out to realize prediction of each scale respectively. Finally the prediction results of each scale are fused as a final prediction model. The predictive model is applied to two case studies of quayside container cranes on the influence of different numbers of samples in prediction results. The experimental prediction results indicate that the proposed model has better prediction performance of the short-term response compared to other prediction methods, especially when the model is trained by a small number of sample data.
- 1 August 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Performance of Constructed Facilities
- Vol. 35 (4) , 04021031
Response Prediction Model for Structures of Quayside Container Crane Based on Monitoring Data
Structural health monitoring and response prediction are of great significance to ensure safety of structures and avoid structural failures. In order to capture changes of structural state in time and improve accuracy of the response prediction, a new predictive model based on dual-tree complex wavelet transform (DTCWT) combined with autoregressive moving average (ARMA) and support vector regression (SVR) is proposed. Firstly, structural monitoring signals are preprocessed and then decomposed by DTCWT. According to variable regulation of the signal characteristics at different scales, ARMA modeling and SVR training are carried out to realize prediction of each scale respectively. Finally the prediction results of each scale are fused as a final prediction model. The predictive model is applied to two case studies of quayside container cranes on the influence of different numbers of samples in prediction results. The experimental prediction results indicate that the proposed model has better prediction performance of the short-term response compared to other prediction methods, especially when the model is trained by a small number of sample data.