Kucerova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kucerova has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Hana Faitova
Institute of Photonics and Electronics of the Czech Academy of Sciences, Chaberská 57, 18251 Prague 8, Czech Republic
2 shared publications - Jan Grym
Institute of Photonics and Electronics Czech Academy of Sciences Chaberská 57 18200 Prague Czech Republic
2 shared publications - Jan Vanis
Institute of Photonics and Electronics (IPE) of CAS, 182 51 Prague, Czech Republic
2 shared publications - Jozef Veselý
Department of Physics of Materials, Charles University, Prague, Czech Republic
2 shared publications - Roman Yatskiv
Institute of Photonics and Electronics of the Czech Academy of Sciences, Chaberská 1014/57, 182 00 Prague, Czech Republic
2 shared publications - David Roesel
J. Heyrovský Institute of Physical Chemistry Czech Academy of Sciences Dolejškova 3 182 23 Prague Czechia
1 shared publication
Latest Publications
- Open Access
- 11 March 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (3) , 508
Highly Rectifying Heterojunctions Formed by Annealed ZnO Nanorods on GaN Substrates
We study the effect of thermal annealing on the electrical properties of the nanoscale p-n heterojunctions based on single n-type ZnO nanorods on p-type GaN substrates. The ZnO nanorods are prepared by chemical bath deposition on both plain GaN substrates and on the substrates locally patterned by focused ion beam lithography. Electrical properties of single nanorod heterojunctions are measured with a nanoprobe in the vacuum chamber of a scanning electron microscope. The focused ion beam lithography provides a uniform nucleation of ZnO, which results in a uniform growth of ZnO nanorods. The specific configuration of the interface between the ZnO nanorods and GaN substrate created by the focused ion beam suppresses the surface leakage current and improves the current-voltage characteristics. Further improvement of the electrical characteristics is achieved by annealing of the structures in nitrogen, which limits the defect-mediated leakage current and increases the carrier injection efficiency.
- 11 March 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (3) , 508
Open AccessHighly Rectifying Heterojunctions Formed by Annealed ZnO Nanorods on GaN Substrates
We study the effect of thermal annealing on the electrical properties of the nanoscale p-n heterojunctions based on single n-type ZnO nanorods on p-type GaN substrates. The ZnO nanorods are prepared by chemical bath deposition on both plain GaN substrates and on the substrates locally patterned by focused ion beam lithography. Electrical properties of single nanorod heterojunctions are measured with a nanoprobe in the vacuum chamber of a scanning electron microscope. The focused ion beam lithography provides a uniform nucleation of ZnO, which results in a uniform growth of ZnO nanorods. The specific configuration of the interface between the ZnO nanorods and GaN substrate created by the focused ion beam suppresses the surface leakage current and improves the current-voltage characteristics. Further improvement of the electrical characteristics is achieved by annealing of the structures in nitrogen, which limits the defect-mediated leakage current and increases the carrier injection efficiency.
- Open Access
Highly Textured Seed Layers for the Growth of Vertically Oriented ZnO Nanorods
One dimensional ZnO nanostructures prepared by favorable and simple solution growth methods are at the forefront of this research. Vertically oriented ZnO nanorods with uniform physical properties require high-quality seed layers with a narrow size distribution of the crystallites, strong c-axis orientation, and low surface roughness and porosity. It has been shown that high quality seed layers can be prepared by the sol–gel process. The sol–gel process involves three essential steps: preparation of the sol, its deposition by dip coating, and thermal treatment comprising preheating and annealing. We put emphasis on the investigation of the heat treatment on the properties of the seed layers and on the vertical alignment of the nanorods. It was demonstrated that for the vertical alignment of the nanorods, the preheating step is crucial and that the temperatures reported in the literature have been too low. With higher preheating temperatures, conditions for the vertical alignment of the nanorods were achieved in both investigated annealing atmospheres in air and in argon.
Open AccessHighly Textured Seed Layers for the Growth of Vertically Oriented ZnO Nanorods
One dimensional ZnO nanostructures prepared by favorable and simple solution growth methods are at the forefront of this research. Vertically oriented ZnO nanorods with uniform physical properties require high-quality seed layers with a narrow size distribution of the crystallites, strong c-axis orientation, and low surface roughness and porosity. It has been shown that high quality seed layers can be prepared by the sol–gel process. The sol–gel process involves three essential steps: preparation of the sol, its deposition by dip coating, and thermal treatment comprising preheating and annealing. We put emphasis on the investigation of the heat treatment on the properties of the seed layers and on the vertical alignment of the nanorods. It was demonstrated that for the vertical alignment of the nanorods, the preheating step is crucial and that the temperatures reported in the literature have been too low. With higher preheating temperatures, conditions for the vertical alignment of the nanorods were achieved in both investigated annealing atmospheres in air and in argon.
- 1 January 2017
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 42 (2) , 1344-1352
Micro-contacted self-assembled tungsten oxide nanorods for hydrogen gas sensing
- 1 January 2017
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 42 (2) , 1344-1352
Micro-contacted self-assembled tungsten oxide nanorods for hydrogen gas sensing