Francis Jayat
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Francis Jayat has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Olivier D. Bernal
Université de Toulouse
3 shared publications - Thierry Bosch
Laboratory of Optoelectronics for Embedded Systems, ENSEEIHT-INP, Toulouse, France
2 shared publications - Usman Zabit
Department of Electrical Engineering, National University of Sciences and Technology (NUST), Islamabad, Pakistan
2 shared publications - Clement Deleau
Université de Toulouse
1 shared publication - Frederic Surre
James Watt School of Engineering, University of Glasgow, Glasgow, U.K.
1 shared publication - Guy Plantier
Laboratoire dAcoustique Le Mans Universit (LAUM), UMR-CNRS 6613, Le Mans, France
1 shared publication
Latest Publications
- 18 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Neural Network-Based Estimation of Optical Feedback Factor in Self-Mixing Interferometry Systems Across Various Feedback Regimes
Self-mixing interferometry (SMI) system is a promising and low-cost approach for displacement measurements. The resolution and precision of displacement estimation depend on key parameters of the SMI system and, in particular, on the optical feedback factor (C). This paper presents a new method for estimating this C factor based on an artificial neural network that analyzes certain specific fringe shape features of SMI signals. Specifically, only six features of the SMI signal are taken into account as input to a compact neural network with one hidden neuron layer (14 neurons) by the estimation process, which reduces the computational cost and simplifies its deployment. This study evaluates the C-estimation capability of the method in various simulated and experimental scenarios, including variations in displacement amplitude and frequency, random displacements, noise levels and speckle effects. These analyses show that the method works correctly for a moderate feedback regime (1 < C < 4.6) with an average relative estimation error inferior to 5% and even 2% for C ≥ 1.5. For the strong feedback regime (C > 4.6), this error is less than 2% (for C < 8). Comparisons with other methods show similar or better accuracy but with the advantage of being able to handle all displacement waveforms (sinusoidal or arbitrary) at low computational cost, which facilitates integration into a real-time embedded system.
- 18 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Neural Network-Based Estimation of Optical Feedback Factor in Self-Mixing Interferometry Systems Across Various Feedback Regimes
Self-mixing interferometry (SMI) system is a promising and low-cost approach for displacement measurements. The resolution and precision of displacement estimation depend on key parameters of the SMI system and, in particular, on the optical feedback factor (C). This paper presents a new method for estimating this C factor based on an artificial neural network that analyzes certain specific fringe shape features of SMI signals. Specifically, only six features of the SMI signal are taken into account as input to a compact neural network with one hidden neuron layer (14 neurons) by the estimation process, which reduces the computational cost and simplifies its deployment. This study evaluates the C-estimation capability of the method in various simulated and experimental scenarios, including variations in displacement amplitude and frequency, random displacements, noise levels and speckle effects. These analyses show that the method works correctly for a moderate feedback regime (1 < C < 4.6) with an average relative estimation error inferior to 5% and even 2% for C ≥ 1.5. For the strong feedback regime (C > 4.6), this error is less than 2% (for C < 8). Comparisons with other methods show similar or better accuracy but with the advantage of being able to handle all displacement waveforms (sinusoidal or arbitrary) at low computational cost, which facilitates integration into a real-time embedded system.
- 29 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (9) , 3446-3453
Optical Feedback FM-to-AM Conversion With Photonic Integrated Circuits for Displacement Sensing Applications
In this paper, integrated silicon nitride edge filters are demonstrated to perform the function of frequency to amplitude (FM-to-AM) conversion of optical feedback interferometric (OFI) signals. Compared to existing OFI FM-to-AM conversion techniques employing optical edge filters based on gas cells, and free-space or fiber-based Mach Zehnder interferometers (MZIs), integrated photonic processing of OFI signals is found to offer greater compactness and design flexibility. In addition, higher resilience to parasitic mechanical vibrations and better temperature control of the photonic chip can potentially facilitate sensing system operation. Three different optical filters have been implemented to perform FM-to-AM conversion: two integrated MZIs with a 2- cm and 4- cm path-length imbalance, respectively, and one micro-ring resonator (MRR). The OFI FM-to-AM conversion factors are experimentally determined to be 0.37 GHz $^{-1}$ , 0.65 GHz $^{-1}$ and, 1 GHz $^{-1}$ for the 2- cm imbalanced MZI, the 4-cm imbalanced MZI and the MRR, respectively. The corresponding noise equivalent displacements (NEDs) with optical chip coupling are found to be approximately 25.4 nm, 11.5 nm and 4.9 nm, respectively, over a 1 kHz bandwidth. The results are compared to those obtained with a reference hydrogen cyanide gas cell exhibiting a sensitivity of approximately 0.25 GHz $^{-1}$ and an NED of 5.6 nm.
- 29 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (9) , 3446-3453
Optical Feedback FM-to-AM Conversion With Photonic Integrated Circuits for Displacement Sensing Applications
In this paper, integrated silicon nitride edge filters are demonstrated to perform the function of frequency to amplitude (FM-to-AM) conversion of optical feedback interferometric (OFI) signals. Compared to existing OFI FM-to-AM conversion techniques employing optical edge filters based on gas cells, and free-space or fiber-based Mach Zehnder interferometers (MZIs), integrated photonic processing of OFI signals is found to offer greater compactness and design flexibility. In addition, higher resilience to parasitic mechanical vibrations and better temperature control of the photonic chip can potentially facilitate sensing system operation. Three different optical filters have been implemented to perform FM-to-AM conversion: two integrated MZIs with a 2- cm and 4- cm path-length imbalance, respectively, and one micro-ring resonator (MRR). The OFI FM-to-AM conversion factors are experimentally determined to be 0.37 GHz $^{-1}$ , 0.65 GHz $^{-1}$ and, 1 GHz $^{-1}$ for the 2- cm imbalanced MZI, the 4-cm imbalanced MZI and the MRR, respectively. The corresponding noise equivalent displacements (NEDs) with optical chip coupling are found to be approximately 25.4 nm, 11.5 nm and 4.9 nm, respectively, over a 1 kHz bandwidth. The results are compared to those obtained with a reference hydrogen cyanide gas cell exhibiting a sensitivity of approximately 0.25 GHz $^{-1}$ and an NED of 5.6 nm.
- Open Access
Toward an Estimation of the Optical Feedback Factor C on the Fly for Displacement Sensing
In this paper, a method based on the inherent event-based sampling capability of laser optical feedback interferometry (OFI) is proposed to assess the optical feedback factor C when the laser operates in the moderate and strong feedback regimes. Most of the phase unwrapping open-loop OFI algorithms rely on the estimation of C to retrieve the displacement with nanometric precision. Here, the proposed method operates in open-loop configuration and relies only on OFI’s fringe detection, thereby improving its robustness and ease of use. The proposed method is able to estimate C with a precision of C on the fly even when C is varying due to speckle. To the best of the authors’ knowledge, these are the first reported results of time-varying C estimation. In addition, through C estimation over time, it could pave the way not only to higher performance phase unwrapping algorithms but also to a better control of the optical feedback level via the use of an adaptive lens and thus to better displacement retrieval performances.
Open AccessToward an Estimation of the Optical Feedback Factor C on the Fly for Displacement Sensing
In this paper, a method based on the inherent event-based sampling capability of laser optical feedback interferometry (OFI) is proposed to assess the optical feedback factor C when the laser operates in the moderate and strong feedback regimes. Most of the phase unwrapping open-loop OFI algorithms rely on the estimation of C to retrieve the displacement with nanometric precision. Here, the proposed method operates in open-loop configuration and relies only on OFI’s fringe detection, thereby improving its robustness and ease of use. The proposed method is able to estimate C with a precision of C on the fly even when C is varying due to speckle. To the best of the authors’ knowledge, these are the first reported results of time-varying C estimation. In addition, through C estimation over time, it could pave the way not only to higher performance phase unwrapping algorithms but also to a better control of the optical feedback level via the use of an adaptive lens and thus to better displacement retrieval performances.