Enny Ratnaningsih
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Enny Ratnaningsih has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Rukman Hertadi
Institut Teknologi Bandung
4 shared publications - Rindia Maharani Putri
Institut Teknologi Bandung
3 shared publications - Wa Ode Sri Rizki
Research Center for Genetic Engineering, National Research and Innovation Agency, Republic of Indonesia (BRIN), STP Soekarno, Cibinong, Indonesia
3 shared publications B. W. Holloway
Department of Genetics and Developmental Biology, Monash University, Clayton, Vic., Australia
2 shared publications- I. Gede Wenten
Chemical Engineering Department, Institut Teknologi Bandung, Jl. Ganesha 10, Bandung, 40132, Indonesia
2 shared publications Marieke E. Bruins
Biobased Chemistry and Technology, Wageningen University, Bornse Weilanden 9, 6708 WG, Wageningen, the Netherlands
2 shared publications
Latest Publications
- 18 April 2026
- Published by Springer Nature in Chemistry Africa
- Vol. 9 (4) , 158
Molecular Docking and Molecular Dynamic Simulations to Study the Interaction of HAA5 with Haloacid Dehalogenase from Pseudomonas Aeruginosa ITB1
- 18 April 2026
- Published by Springer Nature in Chemistry Africa
- Vol. 9 (4) , 158
Molecular Docking and Molecular Dynamic Simulations to Study the Interaction of HAA5 with Haloacid Dehalogenase from Pseudomonas Aeruginosa ITB1
- Open Access
- 14 August 2025
- Published by Elsevier in Next Materials
- Vol. 9
Enhanced production of polyhydroxybutyrate in recombinant Escherichia coli for sustainable material
- 14 August 2025
- Published by Elsevier in Next Materials
- Vol. 9
Open AccessEnhanced production of polyhydroxybutyrate in recombinant Escherichia coli for sustainable material
- Open Access
- 14 May 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (20) , 20160-20170
D7A Mutagenesis and In Silico Analysis on Haloacid Dehalogenase Gene from Pseudomonas aeruginosa ITB1 in pET/paed-d Recombinant Clone
Organohalogens, including haloalkanoic acids, are organic compounds synthesized in large quantities for various purposes in the agriculture, pharmaceutics, textile, and chemical industries. Unfortunately, organohalogen waste is persistent in the environment and toxic to many organisms, including humans. In this respect, bioremediation is considered the safest and most ecofriendly technique to reduce this class of xenobiotics. Pseudomonas aeruginosa ITB1 local strain has been identified to produce haloacid dehalogenase, a hydrolytic enzyme that catalyzes the breakage of carbon–halogen covalent bonds in haloalkanoic acids. Our previous studies have successfully cloned the haloacid dehalogenase gene from this bacterium into pGEM-T Easy in E. coli TOP10, sequenced, and then subcloned into pET-30a(+) for expression in E. coli BL21(DE3). The gene was named paed-d, and its enzyme was called Paed-d. In silico analyses suggested that the D7 residue plays an essential role in catalysis. This study was aimed to evaluate the hypothesis by performing mutagenesis of D7A on the cloned gene using a PCR approach. The obtained amplicon was used to transform E. coli TOP10 to confirm the mutation (paed-d D7A) by sequencing and to transform E. coli BL21(DE3) for expression analyses. Wet lab analysis demonstrated that the Paed-d D7A mutant enzyme was revealed to have 2.5-fold lowered specific activity compared to the wild type. This result proved the hypothesis that D7 in haloacid dehalogenase plays an important role in the catalysis process.
- 14 May 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (20) , 20160-20170
Open AccessD7A Mutagenesis and In Silico Analysis on Haloacid Dehalogenase Gene from Pseudomonas aeruginosa ITB1 in pET/paed-d Recombinant Clone
Organohalogens, including haloalkanoic acids, are organic compounds synthesized in large quantities for various purposes in the agriculture, pharmaceutics, textile, and chemical industries. Unfortunately, organohalogen waste is persistent in the environment and toxic to many organisms, including humans. In this respect, bioremediation is considered the safest and most ecofriendly technique to reduce this class of xenobiotics. Pseudomonas aeruginosa ITB1 local strain has been identified to produce haloacid dehalogenase, a hydrolytic enzyme that catalyzes the breakage of carbon–halogen covalent bonds in haloalkanoic acids. Our previous studies have successfully cloned the haloacid dehalogenase gene from this bacterium into pGEM-T Easy in E. coli TOP10, sequenced, and then subcloned into pET-30a(+) for expression in E. coli BL21(DE3). The gene was named paed-d, and its enzyme was called Paed-d. In silico analyses suggested that the D7 residue plays an essential role in catalysis. This study was aimed to evaluate the hypothesis by performing mutagenesis of D7A on the cloned gene using a PCR approach. The obtained amplicon was used to transform E. coli TOP10 to confirm the mutation (paed-d D7A) by sequencing and to transform E. coli BL21(DE3) for expression analyses. Wet lab analysis demonstrated that the Paed-d D7A mutant enzyme was revealed to have 2.5-fold lowered specific activity compared to the wild type. This result proved the hypothesis that D7 in haloacid dehalogenase plays an important role in the catalysis process.
- 20 February 2025
- Published by IOP Publishing in Biomedical Materials
- Vol. 20 (2) , 025028
Study on the development of nanoparticles based on levan for oral insulin delivery
Oral insulin administration has gained attention as a promising alternative to injections. However, its effectiveness is hindered by the major challenge of degradation by gastric acid. Biopolymer-based nanocarriers have been explored as a solution to address this challenge. This study examines levan, a biopolymer derived from Bacillus licheniformis BK1, for its viability as a nanocarrier for insulin. Levan was modified through acetylation, and both levan (I-Lv) and its acetylated (I-ALv) form were utilized as carriers for insulin in a nanoparticles (NPs) delivery system. The resulting NPs were spherical, with diameters ranging from 250 to 500 nm and encapsulation efficiencies of 78.64% and 88.30%, respectively. The insulin release from I-Lv NPs in simulated gastric fluid exhibited a burst release pattern that was more rapid than that of I-ALv. To further evaluate, the conformational stability of insulin in NPs was analyzed by measuring the transition enthalpy of secondary and tertiary structures. The stability of the secondary structure was determined through alpha-helix content using circular dichroism, while the tertiary structure stability was evaluated via the fluorescence intensity of tryptophan residues. The result revealed that insulin in I-ALv NPs exhibited enhanced conformational stability compared to free-state (FS) insulin and I-Lv NP, with transition enthalpies of 0.91 ± 0.62 and 4.42 ± 0.46 kcal mol−1 for secondary and tertiary structures, respectively. Moreover, preliminary in vivo studies revealed that I-ALv had a significant impact compared to FS insulin and I-Lv, demonstrating reduction in blood glucose levels. These findings highlight the potential of I-ALv as a promising candidate for antidiabetic therapy and an efficient oral delivery system.
- 20 February 2025
- Published by IOP Publishing in Biomedical Materials
- Vol. 20 (2) , 025028
Study on the development of nanoparticles based on levan for oral insulin delivery
Oral insulin administration has gained attention as a promising alternative to injections. However, its effectiveness is hindered by the major challenge of degradation by gastric acid. Biopolymer-based nanocarriers have been explored as a solution to address this challenge. This study examines levan, a biopolymer derived from Bacillus licheniformis BK1, for its viability as a nanocarrier for insulin. Levan was modified through acetylation, and both levan (I-Lv) and its acetylated (I-ALv) form were utilized as carriers for insulin in a nanoparticles (NPs) delivery system. The resulting NPs were spherical, with diameters ranging from 250 to 500 nm and encapsulation efficiencies of 78.64% and 88.30%, respectively. The insulin release from I-Lv NPs in simulated gastric fluid exhibited a burst release pattern that was more rapid than that of I-ALv. To further evaluate, the conformational stability of insulin in NPs was analyzed by measuring the transition enthalpy of secondary and tertiary structures. The stability of the secondary structure was determined through alpha-helix content using circular dichroism, while the tertiary structure stability was evaluated via the fluorescence intensity of tryptophan residues. The result revealed that insulin in I-ALv NPs exhibited enhanced conformational stability compared to free-state (FS) insulin and I-Lv NP, with transition enthalpies of 0.91 ± 0.62 and 4.42 ± 0.46 kcal mol−1 for secondary and tertiary structures, respectively. Moreover, preliminary in vivo studies revealed that I-ALv had a significant impact compared to FS insulin and I-Lv, demonstrating reduction in blood glucose levels. These findings highlight the potential of I-ALv as a promising candidate for antidiabetic therapy and an efficient oral delivery system.
- Open Access
- 8 October 2022
- Published by Hindawi Limited in The Scientific World Journal
- Vol. 2022, 1-9
In Silico Analysis on the Interaction of Haloacid Dehalogenase from Bacillus cereus IndB1 with 2-Chloroalkanoic Acid Substrates
Recently, haloacid dehalogenases have gained a lot of interest because of their potential applications in bioremediation and synthesis of chemical products. The haloacid dehalogenase gene from Bacillus cereus IndB1 (bcfd1) has been isolated, expressed, and Bcfd1 enzyme activity towards monochloroacetic acid has been successfully studied. However, the structure, enantioselectivity, substrate range, and essential residues of Bcfd1 have not been elucidated. This research performed computational studies to predict the Bcfd1 protein structure and analyse the interaction of Bcfd1 towards several haloacid substrates to comprehend their enantioselectivity and substrates range. Structure prediction revealed that Bcfd1 protein consist of two domains. The main domain consists of seven β-sheets connected by six α-helices and four 310-helices forming a Rossmannoid fold. On the other hand, the cap domain consists of five β-sheets connected by five α-helices. The docking simulation showed that 2-chloroalkanoic acids bind to the active site of Bcfd1 with docking energy decreases as the length of their alkyl chain increases. The docking simulation also indicated that the docking energy differences of two enantiomers of 2-chloroalkanoic acids substrates were not significant. Further analysis revealed the role of Met1, Asp2, Cys33, and Lys204 residues in orienting the carboxylic group of 2-chloroalkanoic acids in the active site of this enzyme through hydrogen bonds. This research proved that computational studies could be used to figure out the effect of substrates enantiomer and length of carbon skeleton to Bcfd1 affinity toward 2-chloroalkanoic acids.
- 8 October 2022
- Published by Hindawi Limited in The Scientific World Journal
- Vol. 2022, 1-9
Open AccessIn Silico Analysis on the Interaction of Haloacid Dehalogenase from Bacillus cereus IndB1 with 2-Chloroalkanoic Acid Substrates
Recently, haloacid dehalogenases have gained a lot of interest because of their potential applications in bioremediation and synthesis of chemical products. The haloacid dehalogenase gene from Bacillus cereus IndB1 (bcfd1) has been isolated, expressed, and Bcfd1 enzyme activity towards monochloroacetic acid has been successfully studied. However, the structure, enantioselectivity, substrate range, and essential residues of Bcfd1 have not been elucidated. This research performed computational studies to predict the Bcfd1 protein structure and analyse the interaction of Bcfd1 towards several haloacid substrates to comprehend their enantioselectivity and substrates range. Structure prediction revealed that Bcfd1 protein consist of two domains. The main domain consists of seven β-sheets connected by six α-helices and four 310-helices forming a Rossmannoid fold. On the other hand, the cap domain consists of five β-sheets connected by five α-helices. The docking simulation showed that 2-chloroalkanoic acids bind to the active site of Bcfd1 with docking energy decreases as the length of their alkyl chain increases. The docking simulation also indicated that the docking energy differences of two enantiomers of 2-chloroalkanoic acids substrates were not significant. Further analysis revealed the role of Met1, Asp2, Cys33, and Lys204 residues in orienting the carboxylic group of 2-chloroalkanoic acids in the active site of this enzyme through hydrogen bonds. This research proved that computational studies could be used to figure out the effect of substrates enantiomer and length of carbon skeleton to Bcfd1 affinity toward 2-chloroalkanoic acids.
- Open Access
- 2 March 2022
- Published by Bogor Agricultural University in HAYATI Journal of Biosciences
- Vol. 29 (3) , 310-319
Cloning, Expression, and In Silico Analysis of Class IV Poly-(R)-3-hydroxybutyrate Genes from New Strain of Bacillus thuringiensis TH-01
Poly-(R)-3-hydroxybutyrate (PHB) is a bioplastic derivative of polyhydroxyalkanoate (PHA) which can be synthesized by bacteria under certain growth conditions. Previous study has reported a new strain of Bacillus thuringiensis TH-01 isolated from thermite, which found to accumulate PHB. This research aimed to clone PHB biosynthesis genes from B. thuringiensis TH-01 and study its expression as well as predict the tertiary structure of the enzymes. The clone of phaA gene, which encodes PhaA, was obtained as 1182 bp. On the other hand, 2546 bp clone of phaRBC gene cluster was obtained to consist of 744 bp phaB, 1086 bp phaC, and 483 bp phaR, encoding respective PhaB, PhaC, and PhaR proteins. In silico analysis indicated that PhaA, PhaB, PhaC, and PhaR, revealed to have 393, 247, 361, and 160 amino acid, respectively. The predicted model of PhaA, PhaB, and PhaC showed dominant structure of α/β folding motif, while PhaR was dominated by a helix-loop-helix motif. The catalytic residues of PhaA were Cys88, His349, and Cys379, whereas the catalytic residues of PhaB were Ser142, Tyr155, and Lys159. These catalytic residues were identical to those residues obtained in other PHB biosynthetic enzymes reported elsewhere, confirming that our clones were of PHB biosynthetic genes.
- 2 March 2022
- Published by Bogor Agricultural University in HAYATI Journal of Biosciences
- Vol. 29 (3) , 310-319
Open AccessCloning, Expression, and In Silico Analysis of Class IV Poly-(R)-3-hydroxybutyrate Genes from New Strain of Bacillus thuringiensis TH-01
Poly-(R)-3-hydroxybutyrate (PHB) is a bioplastic derivative of polyhydroxyalkanoate (PHA) which can be synthesized by bacteria under certain growth conditions. Previous study has reported a new strain of Bacillus thuringiensis TH-01 isolated from thermite, which found to accumulate PHB. This research aimed to clone PHB biosynthesis genes from B. thuringiensis TH-01 and study its expression as well as predict the tertiary structure of the enzymes. The clone of phaA gene, which encodes PhaA, was obtained as 1182 bp. On the other hand, 2546 bp clone of phaRBC gene cluster was obtained to consist of 744 bp phaB, 1086 bp phaC, and 483 bp phaR, encoding respective PhaB, PhaC, and PhaR proteins. In silico analysis indicated that PhaA, PhaB, PhaC, and PhaR, revealed to have 393, 247, 361, and 160 amino acid, respectively. The predicted model of PhaA, PhaB, and PhaC showed dominant structure of α/β folding motif, while PhaR was dominated by a helix-loop-helix motif. The catalytic residues of PhaA were Cys88, His349, and Cys379, whereas the catalytic residues of PhaB were Ser142, Tyr155, and Lys159. These catalytic residues were identical to those residues obtained in other PHB biosynthetic enzymes reported elsewhere, confirming that our clones were of PHB biosynthetic genes.
- Open Access
- 13 July 2021
- Published by Institute of Research and Community Services Diponegoro University (LPPM UNDIP) in Jurnal Kimia Sains dan Aplikasi
- Vol. 24 (5) , 161-169
Molecular Cloning and Expression of Haloacid Dehalogenase Gene from a Local Pseudomonas aeruginosa ITB1 Strain and Tertiary Structure Prediction of the Produced Enzyme
Organohalogens are widely utilized as pesticides, herbicides, solvents, and for many other industrial purposes. However, the use of these compounds caused some negative impacts to the environment due to their toxicity and persistency. In the light of this, some microbes have been identified and employed to perform dehalogenation, converting halogenated organic compounds to non-toxic materials. In this research, we successfully cloned and sequenced the haloacid dehalogenase gene from a local Pseudomonas aeruginosa ITB1 strain, which is involved in the degradation of monochloroacetate. First, the haloacid dehalogenase gene was amplified by PCR using a pair of primers designed from the same gene sequences of other P. aeruginosa strains available in the GenBank. The cloned gene in pGEM-T in E. coli TOP10 was sequenced, analyzed, and then sub-cloned into pET-30a(+) for expression in E. coli BL21 (DE3). To facilitate direct sub-cloning, restriction sequences of EcoRI (G/AATTC) and HindIII (A/AGCTT) were added to the forward and reversed primers, respectively. The expressed protein in E. coli BL21 (DE3) appeared as a 26-kDa protein in SDS-PAGE analysis, which is in good agreement with the size predicted by ExPASy Protparam. We obtained that the best expression in LB liquid medium was achieved with 0.01 mM IPTG induction at 30°C incubation for 3 hours. We also found that the enzyme is more concentrated in the pellet cells as inclusion bodies. Furthermore, the in-silico analysis revealed that this enzyme consists of 233 amino acid residues. This enzyme’s predicted tertiary structure shows six β-sheets flanked by α-helixes and thus belongs to Group II haloacid dehalogenase. Based on the structural prediction, amino acid residues of Asp7, Ser121, and Asn122 are present in the active site and might play essential roles in catalysis. The presented study laid the foundation for recombinant haloacid dehalogenase production from P. aeruginosa local strains. It provided an insight into the utilization of recombinant local strains to remediate environmental problems caused by organohalogens.
- 13 July 2021
- Published by Institute of Research and Community Services Diponegoro University (LPPM UNDIP) in Jurnal Kimia Sains dan Aplikasi
- Vol. 24 (5) , 161-169
Open AccessMolecular Cloning and Expression of Haloacid Dehalogenase Gene from a Local Pseudomonas aeruginosa ITB1 Strain and Tertiary Structure Prediction of the Produced Enzyme
Organohalogens are widely utilized as pesticides, herbicides, solvents, and for many other industrial purposes. However, the use of these compounds caused some negative impacts to the environment due to their toxicity and persistency. In the light of this, some microbes have been identified and employed to perform dehalogenation, converting halogenated organic compounds to non-toxic materials. In this research, we successfully cloned and sequenced the haloacid dehalogenase gene from a local Pseudomonas aeruginosa ITB1 strain, which is involved in the degradation of monochloroacetate. First, the haloacid dehalogenase gene was amplified by PCR using a pair of primers designed from the same gene sequences of other P. aeruginosa strains available in the GenBank. The cloned gene in pGEM-T in E. coli TOP10 was sequenced, analyzed, and then sub-cloned into pET-30a(+) for expression in E. coli BL21 (DE3). To facilitate direct sub-cloning, restriction sequences of EcoRI (G/AATTC) and HindIII (A/AGCTT) were added to the forward and reversed primers, respectively. The expressed protein in E. coli BL21 (DE3) appeared as a 26-kDa protein in SDS-PAGE analysis, which is in good agreement with the size predicted by ExPASy Protparam. We obtained that the best expression in LB liquid medium was achieved with 0.01 mM IPTG induction at 30°C incubation for 3 hours. We also found that the enzyme is more concentrated in the pellet cells as inclusion bodies. Furthermore, the in-silico analysis revealed that this enzyme consists of 233 amino acid residues. This enzyme’s predicted tertiary structure shows six β-sheets flanked by α-helixes and thus belongs to Group II haloacid dehalogenase. Based on the structural prediction, amino acid residues of Asp7, Ser121, and Asn122 are present in the active site and might play essential roles in catalysis. The presented study laid the foundation for recombinant haloacid dehalogenase production from P. aeruginosa local strains. It provided an insight into the utilization of recombinant local strains to remediate environmental problems caused by organohalogens.
- Open Access
- 8 July 2021
- Published by Institute of Research and Community Services Diponegoro University (LPPM UNDIP) in International Journal of Renewable Energy Development
- Vol. 10 (4) , 857-863
Optimization of Monochloroacetic Acid Biodegradation by Recombinant E. coli BL21 (DE3)/pET-bcfd1 Carrying Haloacid Dehalogenase Gene from Bacillus cereus IndB1
In recent years, attention to microbial dehalogenase has continually increased due to its potential application, both in bioremediation and in the biosynthesis of fine chemicals. Many microbial recombinant strains carrying dehalogenase gene have been developed, particularly to increase the dehalogenase production and its quality. In this study, we aimed to find the optimum condition for the production of active haloacid dehalogenase by E. coli BL21 (DE3) harboring recombinant plasmid pET-bcfd1 that carried haloacid dehalogenase gene from Bacillus cereus IndB1 local strain. This would be examined by assessing the ability of whole cell life culture to degrade monochloroacetic acid (MCA) and quantifying the chloride ion released into the medium. Several variables were evaluated to find this optimal condition. We found that the best condition for MCA biodegradation using this recombinant clone was at 0.2 mM MCA, 10 μM of isopropyl β-D-1-thiogalactopyranoside (IPTG), 6 hours of pre-induction incubation at 37ºC with shaking, 2 hours IPTG induction at 30ºC with shaking, at pH 7 in Luria Bertani (LB) liquid medium without NaCl, which produced about 0.056 mM chloride ions. Inducer concentration, pre-induction incubation time and temperature, as well as induction time and temperature were apparent to be associated with the expression of the protein, while the MCA concentration and the pH of the medium influenced the ability of the recombinant E. coli BL21 (DE3)/pET-bcfd1 to grow in toxic environment. Our findings laid the foundation for exploration of dehalogenases from local Bacillus strains through genetic engineering for MCA biodegradation
- 8 July 2021
- Published by Institute of Research and Community Services Diponegoro University (LPPM UNDIP) in International Journal of Renewable Energy Development
- Vol. 10 (4) , 857-863
Open AccessOptimization of Monochloroacetic Acid Biodegradation by Recombinant E. coli BL21 (DE3)/pET-bcfd1 Carrying Haloacid Dehalogenase Gene from Bacillus cereus IndB1
In recent years, attention to microbial dehalogenase has continually increased due to its potential application, both in bioremediation and in the biosynthesis of fine chemicals. Many microbial recombinant strains carrying dehalogenase gene have been developed, particularly to increase the dehalogenase production and its quality. In this study, we aimed to find the optimum condition for the production of active haloacid dehalogenase by E. coli BL21 (DE3) harboring recombinant plasmid pET-bcfd1 that carried haloacid dehalogenase gene from Bacillus cereus IndB1 local strain. This would be examined by assessing the ability of whole cell life culture to degrade monochloroacetic acid (MCA) and quantifying the chloride ion released into the medium. Several variables were evaluated to find this optimal condition. We found that the best condition for MCA biodegradation using this recombinant clone was at 0.2 mM MCA, 10 μM of isopropyl β-D-1-thiogalactopyranoside (IPTG), 6 hours of pre-induction incubation at 37ºC with shaking, 2 hours IPTG induction at 30ºC with shaking, at pH 7 in Luria Bertani (LB) liquid medium without NaCl, which produced about 0.056 mM chloride ions. Inducer concentration, pre-induction incubation time and temperature, as well as induction time and temperature were apparent to be associated with the expression of the protein, while the MCA concentration and the pH of the medium influenced the ability of the recombinant E. coli BL21 (DE3)/pET-bcfd1 to grow in toxic environment. Our findings laid the foundation for exploration of dehalogenases from local Bacillus strains through genetic engineering for MCA biodegradation
- Open Access
- 25 January 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (3) , 1078
Recent Advancements of UF-Based Separation for Selective Enrichment of Proteins and Bioactive Peptides—A Review
Proteins are one of the primary building blocks that have significant functional properties to be applied in food and pharmaceutical industries. Proteins could be beneficial in their concentrated products or isolates, of which membrane-based filtration methods such as ultrafiltration (UF) encompass application in broad spectra of protein sources. More importantly, selective enrichment by UF is of immense interest due to the presence of antinutrients that may dominate their perspicuous bioactivities. UF process is primarily obstructed by concentration polarization and fouling; in turn, a trade-off between productivity and selectivity emerges, especially when pure isolates are an ultimate goal. Several factors such as operating conditions and membrane equipment could leverage those pervasive contributions; therefore, UF protocols should be optimized for each unique protein mixture and mode of configuration. For instance, employing charged UF membranes or combining UF membranes with electrodialysis enables efficient separation of proteins with a similar molecular weight, which is hard to achieve by the conventional UF membrane. Meanwhile, some proposed strategies, such as utilizing ultrasonic waves, tuning operating conditions, and modifying membrane surfaces, can effectively mitigate fouling issues. A plethora of advancements in UF, from their membrane material modification to the arrangement of new configurations, contribute to the quest to actualize promising potentials of protein separation by UF, and they are reviewed in this paper.
- 25 January 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (3) , 1078
Open AccessRecent Advancements of UF-Based Separation for Selective Enrichment of Proteins and Bioactive Peptides—A Review
Proteins are one of the primary building blocks that have significant functional properties to be applied in food and pharmaceutical industries. Proteins could be beneficial in their concentrated products or isolates, of which membrane-based filtration methods such as ultrafiltration (UF) encompass application in broad spectra of protein sources. More importantly, selective enrichment by UF is of immense interest due to the presence of antinutrients that may dominate their perspicuous bioactivities. UF process is primarily obstructed by concentration polarization and fouling; in turn, a trade-off between productivity and selectivity emerges, especially when pure isolates are an ultimate goal. Several factors such as operating conditions and membrane equipment could leverage those pervasive contributions; therefore, UF protocols should be optimized for each unique protein mixture and mode of configuration. For instance, employing charged UF membranes or combining UF membranes with electrodialysis enables efficient separation of proteins with a similar molecular weight, which is hard to achieve by the conventional UF membrane. Meanwhile, some proposed strategies, such as utilizing ultrasonic waves, tuning operating conditions, and modifying membrane surfaces, can effectively mitigate fouling issues. A plethora of advancements in UF, from their membrane material modification to the arrangement of new configurations, contribute to the quest to actualize promising potentials of protein separation by UF, and they are reviewed in this paper.