Qilin Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Qilin Yang has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
Rigan Xu
Harbin Institute of Technology
6 shared publications- Dawei Wang
School of Transportation Science and Engineering, Harbin Institute of Technology, Harbin, People’s Republic of China
5 shared publications Hu Zhao
Harbin Institute of Technology
5 shared publicationsQingnan Zhu
School of Transportation Science and Engineering, School of Civil Engineering
4 shared publications- Caihua Yu
Henan University of Technology
3 shared publications - Yangming Gao
Liverpool John Moores Univ
3 shared publications
Latest Publications
- 1 November 2026
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 38 (11) , 04026396
Enhancing Bitumen Performance with Recycled Carbon Fiber–Reinforced Polymers: A Sustainable Approach to Waste Management
The widespread use of carbon fiber–reinforced polymer (CFRP) has resulted in a substantial increase in waste CFRP materials, presenting a significant global environmental challenge regarding their disposal. Recycling these waste CFRP materials would be an environmentally sustainable solution, but the diminished mechanical properties of recycled carbon fiber (rCF) restrict the utilization of rCF in high-precision industries. To address the potential to recycle rCF, this study incorporated rCF into bitumen to determine if rCF could enhance bitumen’s mechanical performance. A comprehensive evaluation of the effect of rCF on bitumen’s durability measured high-temperature performance, resistance to fatigue, and low-temperature performance. The enhancement mechanisms were determined by analyzing the thermodynamic properties and microstructural characteristics of base bitumen and bitumen with rCF. The results demonstrated that the incorporation of rCF increased the rutting resistance and fatigue resistance of bitumen, especially for rCF with a diameters ranging from 0.5 to 1.0 mm and a length of 10 mm. The rCF with a diameters ranging from 0.2 to 0.5 mm and a length of 5 mm was more beneficial for improving the low-temperature cracking resistance of bitumen. The rCF with lower specific heat capacity enhanced heat absorption, thereby improving the high-temperature resistance of the bitumen. In addition, the rCFs formed a three-dimensional network structure in bitumen; this structure restricted bitumen flow and reinforced the bitumen, thereby enhancing the low-temperature cracking resistance of the bitumen. This study highlights the promising feasibility of integrating rCF into bitumen as an economically and environmentally sustainable solution for recycling waste CFRP materials.
- 1 November 2026
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 38 (11) , 04026396
Enhancing Bitumen Performance with Recycled Carbon Fiber–Reinforced Polymers: A Sustainable Approach to Waste Management
The widespread use of carbon fiber–reinforced polymer (CFRP) has resulted in a substantial increase in waste CFRP materials, presenting a significant global environmental challenge regarding their disposal. Recycling these waste CFRP materials would be an environmentally sustainable solution, but the diminished mechanical properties of recycled carbon fiber (rCF) restrict the utilization of rCF in high-precision industries. To address the potential to recycle rCF, this study incorporated rCF into bitumen to determine if rCF could enhance bitumen’s mechanical performance. A comprehensive evaluation of the effect of rCF on bitumen’s durability measured high-temperature performance, resistance to fatigue, and low-temperature performance. The enhancement mechanisms were determined by analyzing the thermodynamic properties and microstructural characteristics of base bitumen and bitumen with rCF. The results demonstrated that the incorporation of rCF increased the rutting resistance and fatigue resistance of bitumen, especially for rCF with a diameters ranging from 0.5 to 1.0 mm and a length of 10 mm. The rCF with a diameters ranging from 0.2 to 0.5 mm and a length of 5 mm was more beneficial for improving the low-temperature cracking resistance of bitumen. The rCF with lower specific heat capacity enhanced heat absorption, thereby improving the high-temperature resistance of the bitumen. In addition, the rCFs formed a three-dimensional network structure in bitumen; this structure restricted bitumen flow and reinforced the bitumen, thereby enhancing the low-temperature cracking resistance of the bitumen. This study highlights the promising feasibility of integrating rCF into bitumen as an economically and environmentally sustainable solution for recycling waste CFRP materials.
- 19 August 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (34) , 24792-24808
Interfacial Failure Mechanism of Bitumen Reinforced with Carbon Nanotubes: A Micro–Nano Analysis
Carbon-based nanomaterials have been widely used as bitumen modifiers because of their excellent mechanical and functional properties. Among carbon-based nanomaterials, carbon nanotubes (CNTs) have attracted particular attention because of their high aspect ratios and strong reinforcing potential. However, the interfacial failure mechanism of CNT-reinforced bitumen at the micro- and nanoscale remains unclear. This study employs molecular dynamics simulations to investigate the interfacial failure behavior of CNT-reinforced bitumen at the micro- and nanoscale. Utilizing the LAMMPS platform, a representative volume element model of CNT-reinforced bitumen was developed to evaluate both tensile and shear loading across two distinct CNT alignments: parallel and orthogonal. Through these models, the interfacial mechanical responses, crack evolution, and atomic-scale interaction morphologies were examined to elucidate the fundamental load-transfer behavior. The findings indicate that CNTs aligned parallel to the interface offer superior performance in tensile load bearing and transfer, whereas CNTs aligned orthogonal to the interface exhibit greater resilience under shear stress. During tensile deformation, failure is primarily driven by a loss of interfacial adhesion, as demonstrated by the observed crack propagation patterns and shifts in the atomic interaction morphology. In contrast, shear-induced damage is largely localized within the bitumen matrix, indicating that the cohesive failure remains the dominant degradation mode. These simulation results are further compared with direct tensile tests and SEM observations, which provide experimental evidence for interfacial sliding, CNT pull-out, and local matrix fracture in CNT-reinforced bitumen. Additional rheological characterization further demonstrates that CNT-modified bitumen has enhanced overall viscoelastic performance and deformation resistance compared with base bitumen. By detailing at the atomic scale the toughening mechanisms of CNT-reinforced bitumen, this work provides a theoretical framework for understanding and optimizing CNT-reinforced bitumen for pavement engineering applications.
- 19 August 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (34) , 24792-24808
Interfacial Failure Mechanism of Bitumen Reinforced with Carbon Nanotubes: A Micro–Nano Analysis
Carbon-based nanomaterials have been widely used as bitumen modifiers because of their excellent mechanical and functional properties. Among carbon-based nanomaterials, carbon nanotubes (CNTs) have attracted particular attention because of their high aspect ratios and strong reinforcing potential. However, the interfacial failure mechanism of CNT-reinforced bitumen at the micro- and nanoscale remains unclear. This study employs molecular dynamics simulations to investigate the interfacial failure behavior of CNT-reinforced bitumen at the micro- and nanoscale. Utilizing the LAMMPS platform, a representative volume element model of CNT-reinforced bitumen was developed to evaluate both tensile and shear loading across two distinct CNT alignments: parallel and orthogonal. Through these models, the interfacial mechanical responses, crack evolution, and atomic-scale interaction morphologies were examined to elucidate the fundamental load-transfer behavior. The findings indicate that CNTs aligned parallel to the interface offer superior performance in tensile load bearing and transfer, whereas CNTs aligned orthogonal to the interface exhibit greater resilience under shear stress. During tensile deformation, failure is primarily driven by a loss of interfacial adhesion, as demonstrated by the observed crack propagation patterns and shifts in the atomic interaction morphology. In contrast, shear-induced damage is largely localized within the bitumen matrix, indicating that the cohesive failure remains the dominant degradation mode. These simulation results are further compared with direct tensile tests and SEM observations, which provide experimental evidence for interfacial sliding, CNT pull-out, and local matrix fracture in CNT-reinforced bitumen. Additional rheological characterization further demonstrates that CNT-modified bitumen has enhanced overall viscoelastic performance and deformation resistance compared with base bitumen. By detailing at the atomic scale the toughening mechanisms of CNT-reinforced bitumen, this work provides a theoretical framework for understanding and optimizing CNT-reinforced bitumen for pavement engineering applications.
- 9 July 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (28) , 20209-20224
Aging Resistance Performance and Mechanisms of SBS-Modified Bitumen Enhanced with Carbon Nanomaterials
Bitumen modified with styrene-butadiene-styrene copolymer (SBS) is susceptible to thermal-oxidative aging during service, compromising its long-term durability. Carbon nanomaterials exhibit the potential to inhibit oxidative degradation of bitumen and enhance resistance to aging. However, the synergism mechanism of aging resistance in the use of carbon nanomaterials and SBS in bitumen composites is still unclear. This study investigated the mechanisms through which graphene and carbon nanotube (CNT) enhance the durability of SBS-modified bitumen. This study also systematically compared and analyzed the aging resistance of SBS-modified bitumen, bitumen with hybrid CNT/SBS, bitumen with hybrid graphene/SBS, and bitumen with hybrid graphene/CNT/SBS. The results show that the incorporation of carbon nanomaterials significantly reduces the chemical aging index and the rheological aging index of SBS-modified bitumen, thereby markedly improving its aging resistance. These are the main antiaging mechanisms: Carbon nanomaterials form a three-dimensional barrier network in SBS-modified bitumen. This network effectively inhibits oxygen diffusion and ultraviolet penetration. It delays chain-scission degradation of SBS and oxidative hardening of bitumen, thereby maintaining the integrity of the modified network. In addition, the nanofillers restrict the thermal motion of molecular chains through interfacial interactions. Bitumen with hybrid CNT/SBS exhibited the best aging resistance, and bitumen with hybrid graphene/SBS was second. This study systematically revealed the synergistic aging resistance mechanisms of carbon nanomaterials and SBS in bitumen composites. It provides theoretical support and performance evaluation for the engineering application of carbon nanomaterials in bitumen pavement infrastructure.
- 9 July 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (28) , 20209-20224
Aging Resistance Performance and Mechanisms of SBS-Modified Bitumen Enhanced with Carbon Nanomaterials
Bitumen modified with styrene-butadiene-styrene copolymer (SBS) is susceptible to thermal-oxidative aging during service, compromising its long-term durability. Carbon nanomaterials exhibit the potential to inhibit oxidative degradation of bitumen and enhance resistance to aging. However, the synergism mechanism of aging resistance in the use of carbon nanomaterials and SBS in bitumen composites is still unclear. This study investigated the mechanisms through which graphene and carbon nanotube (CNT) enhance the durability of SBS-modified bitumen. This study also systematically compared and analyzed the aging resistance of SBS-modified bitumen, bitumen with hybrid CNT/SBS, bitumen with hybrid graphene/SBS, and bitumen with hybrid graphene/CNT/SBS. The results show that the incorporation of carbon nanomaterials significantly reduces the chemical aging index and the rheological aging index of SBS-modified bitumen, thereby markedly improving its aging resistance. These are the main antiaging mechanisms: Carbon nanomaterials form a three-dimensional barrier network in SBS-modified bitumen. This network effectively inhibits oxygen diffusion and ultraviolet penetration. It delays chain-scission degradation of SBS and oxidative hardening of bitumen, thereby maintaining the integrity of the modified network. In addition, the nanofillers restrict the thermal motion of molecular chains through interfacial interactions. Bitumen with hybrid CNT/SBS exhibited the best aging resistance, and bitumen with hybrid graphene/SBS was second. This study systematically revealed the synergistic aging resistance mechanisms of carbon nanomaterials and SBS in bitumen composites. It provides theoretical support and performance evaluation for the engineering application of carbon nanomaterials in bitumen pavement infrastructure.
The micro-nano interfacial mechanism of polymer-carbon nanotubes for advanced bitumen nanocomposites
- 25 November 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (48) , 32885-32901
Molecular Interfacial Interaction Mechanism between Graphene–SBS and Bitumen Components
In recent decades, studies on graphene-modified bitumen remain limited, as the poor dispersion of graphene and its weak interfacial interaction with the bitumen matrix significantly reduce its reinforcing effectiveness. Moreover, styrene-butadiene-styrene (SBS)-modified bitumen demonstrates insufficient thermal stability. To address these issues, researchers have incorporated both graphene and SBS into bitumen. However, a comprehensive understanding of the three-phase interface interaction mechanism among graphene, SBS, and bitumen remains unclear. The objective of this research was to systematically investigate the synergistic mechanism of the three-phase molecular interface between graphene, SBS, and bitumen for the first time by applying molecular dynamics simulations. The results indicated that graphene formed stable interfacial bonds with components such as asphaltene and resin in bitumen via π-π stacking and van der Waals forces. It was shown that SBS was mechanically entangled with graphene through flexible chain segments. Together, these three components generated a three-dimensional interpenetrating network that significantly enhanced both interfacial binding energy and charge transfer efficiency. Compared to the base bitumen, SBS-, graphene-, and hybrid-modified bitumen remarkably improved the high-temperature stability, fatigue resistance, and low-temperature crack resistance. The obtained knowledge provides a theoretical base for the molecular design and interfacial improvement within high-performance pavement materials as a significant factor for extending pavement's service life.
- 25 November 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (48) , 32885-32901
Molecular Interfacial Interaction Mechanism between Graphene–SBS and Bitumen Components
In recent decades, studies on graphene-modified bitumen remain limited, as the poor dispersion of graphene and its weak interfacial interaction with the bitumen matrix significantly reduce its reinforcing effectiveness. Moreover, styrene-butadiene-styrene (SBS)-modified bitumen demonstrates insufficient thermal stability. To address these issues, researchers have incorporated both graphene and SBS into bitumen. However, a comprehensive understanding of the three-phase interface interaction mechanism among graphene, SBS, and bitumen remains unclear. The objective of this research was to systematically investigate the synergistic mechanism of the three-phase molecular interface between graphene, SBS, and bitumen for the first time by applying molecular dynamics simulations. The results indicated that graphene formed stable interfacial bonds with components such as asphaltene and resin in bitumen via π-π stacking and van der Waals forces. It was shown that SBS was mechanically entangled with graphene through flexible chain segments. Together, these three components generated a three-dimensional interpenetrating network that significantly enhanced both interfacial binding energy and charge transfer efficiency. Compared to the base bitumen, SBS-, graphene-, and hybrid-modified bitumen remarkably improved the high-temperature stability, fatigue resistance, and low-temperature crack resistance. The obtained knowledge provides a theoretical base for the molecular design and interfacial improvement within high-performance pavement materials as a significant factor for extending pavement's service life.
- 30 December 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (1) , 842-857
Synergism and Mechanisms of Aging Resistance in the Use of Graphene and Carbon Nanotubes in Bitumen Composites
Thermal oxidation has a significant effect on the durability of bitumen composites reinforced with carbon nanomaterials. However, the mechanisms of aging resistance and the effect of aging on the chemical properties, morphology, micromechanical properties, and rheology of bitumen with carbon nanomaterials are still unclear. This study investigated the mechanisms of aging resistance underlying the synergistic effects of graphene and carbon nanotubes (CNTs) on the durability of bitumen composites. The antiaging properties of bitumen with hybrid graphene/CNT were also compared to those of bitumen with only graphene or/and bitumen with only CNT. Compared with control bitumen, bitumen with graphene, and bitumen with CNT, the bitumen with hybrid graphene/CNT had significantly improved aging resistance as shown by the much lower chemical aging indexes and the lower rheological aging index. The three-dimensional spatial network structure formed by graphene and CNT in bitumen has dual mechanisms underlying the improvement it provides in resistance to aging: the structure effectively confines the thermo-oxidation reactions in bitumen molecules and the structure acts as a barrier to inhibit the penetration of oxygen molecules and reduce their diffusion rate, thereby inhibiting the generation of free radicals. This study reveals the antiaging mechanisms of carbon nanomaterials in bitumen composites, providing a theoretical basis for the application of carbon nanomaterials in pavement engineering.
- 30 December 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (1) , 842-857
Synergism and Mechanisms of Aging Resistance in the Use of Graphene and Carbon Nanotubes in Bitumen Composites
Thermal oxidation has a significant effect on the durability of bitumen composites reinforced with carbon nanomaterials. However, the mechanisms of aging resistance and the effect of aging on the chemical properties, morphology, micromechanical properties, and rheology of bitumen with carbon nanomaterials are still unclear. This study investigated the mechanisms of aging resistance underlying the synergistic effects of graphene and carbon nanotubes (CNTs) on the durability of bitumen composites. The antiaging properties of bitumen with hybrid graphene/CNT were also compared to those of bitumen with only graphene or/and bitumen with only CNT. Compared with control bitumen, bitumen with graphene, and bitumen with CNT, the bitumen with hybrid graphene/CNT had significantly improved aging resistance as shown by the much lower chemical aging indexes and the lower rheological aging index. The three-dimensional spatial network structure formed by graphene and CNT in bitumen has dual mechanisms underlying the improvement it provides in resistance to aging: the structure effectively confines the thermo-oxidation reactions in bitumen molecules and the structure acts as a barrier to inhibit the penetration of oxygen molecules and reduce their diffusion rate, thereby inhibiting the generation of free radicals. This study reveals the antiaging mechanisms of carbon nanomaterials in bitumen composites, providing a theoretical basis for the application of carbon nanomaterials in pavement engineering.
- 15 September 2023
- Published by Elsevier in Construction and Building Materials
- Vol. 404, 133307
Hydrothermal carbonization of waste wood: Sustainable recycling of biomass by-products and novel performance enhancer for bitumen
- 15 September 2023
- Published by Elsevier in Construction and Building Materials
- Vol. 404, 133307
Hydrothermal carbonization of waste wood: Sustainable recycling of biomass by-products and novel performance enhancer for bitumen
- 18 July 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (14) , 13048-13062
Multiscale Interfacial Interactions in Graphene-Asphalt Nanocomposites: Implications for Asphalt Pavement Material Applications
- 18 July 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (14) , 13048-13062
Multiscale Interfacial Interactions in Graphene-Asphalt Nanocomposites: Implications for Asphalt Pavement Material Applications
- 30 May 2023
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 39 (23) , 8339-8353
Deterioration Effects of Oxidative Aging on Graphene-Asphalt Nanocomposite Interfaces: Multiscale Modeling
The purpose of this study is to explore the mechanism of interfacial degradation of graphene-asphalt nanocomposites by oxidative aging and to explain the principle of reduced cracking resistance. In this study, density functional theory (DFT), molecular dynamics (MD) simulation, atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectroscopy, and linear amplitude scanning test (LAS) were used to quantify the effect of oxidative aging on the interfacial degradation of graphene-asphalt nanocomposites with different scales, and the coupling mechanism between scales was systematically analyzed. The results show that interfacial degradation is a complex multiscale coupling behavior. Oxidative aging reduced the fatigue life (Nf) of graphene-asphalt nanocomposites by 8.6% due to a 63.9% reduction in shear barriers and a 14.2% reduction in energy barriers at the molecular interface. Furthermore, oxidative aging enhanced the intermolecular interactions and compatibility of the graphene-asphalt molecules. The interfacial interaction of aged graphene-asphalt nanocomposites is mainly van der Waals force. Graphene-aged aromatics and graphene-aged saturates were the most compatible interfaces, and there was typical benzene ring stacking between graphene and aged aromatic 2. Aged aromatics and aged saturates are the main promoters of interfacial strength and stress transfer, while aged asphaltenes and aged resins sometimes play a weakening role, as verified by the AFM. In addition, DFT calculations show that there is no chemical reaction between graphene and aged asphalt molecules, which is consistent with the FTIR results. This study provides a theoretical basis for the development of targeted antiaging and anticracking technologies for asphalt-based materials.
- 30 May 2023
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 39 (23) , 8339-8353
Deterioration Effects of Oxidative Aging on Graphene-Asphalt Nanocomposite Interfaces: Multiscale Modeling
The purpose of this study is to explore the mechanism of interfacial degradation of graphene-asphalt nanocomposites by oxidative aging and to explain the principle of reduced cracking resistance. In this study, density functional theory (DFT), molecular dynamics (MD) simulation, atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectroscopy, and linear amplitude scanning test (LAS) were used to quantify the effect of oxidative aging on the interfacial degradation of graphene-asphalt nanocomposites with different scales, and the coupling mechanism between scales was systematically analyzed. The results show that interfacial degradation is a complex multiscale coupling behavior. Oxidative aging reduced the fatigue life (Nf) of graphene-asphalt nanocomposites by 8.6% due to a 63.9% reduction in shear barriers and a 14.2% reduction in energy barriers at the molecular interface. Furthermore, oxidative aging enhanced the intermolecular interactions and compatibility of the graphene-asphalt molecules. The interfacial interaction of aged graphene-asphalt nanocomposites is mainly van der Waals force. Graphene-aged aromatics and graphene-aged saturates were the most compatible interfaces, and there was typical benzene ring stacking between graphene and aged aromatic 2. Aged aromatics and aged saturates are the main promoters of interfacial strength and stress transfer, while aged asphaltenes and aged resins sometimes play a weakening role, as verified by the AFM. In addition, DFT calculations show that there is no chemical reaction between graphene and aged asphalt molecules, which is consistent with the FTIR results. This study provides a theoretical basis for the development of targeted antiaging and anticracking technologies for asphalt-based materials.
- Open Access
- 23 April 2023
- Published by Elsevier in Water Science and Engineering
- Vol. 16 (3) , 289-294
Effect of Froude similitude deviation on curved channel simulations: A case study in the Middle Yangtze River
- 23 April 2023
- Published by Elsevier in Water Science and Engineering
- Vol. 16 (3) , 289-294
Open AccessEffect of Froude similitude deviation on curved channel simulations: A case study in the Middle Yangtze River