G. Rajalakshmi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
G. Rajalakshmi has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Narayanan Tharangattu Narayanan
Tata Institute of Fundamental Research Hyderabad Serilingampally Mandal Hyderabad 500046 India
5 shared publications - Nirmal K. Viswanathan
University of Hyderabad
3 shared publications Aparna Praturi
Tata Institute of Fundamental Research—Hyderabad 1 , Sy. No 36/P Serilingampally Mandal, Gopanpally Village, Hyderabad 500046, India
2 shared publicationsAshique Lal
Tata Institute of Fundamental Research—Hyderabad 1 , Sy. No 36/P Serilingampally Mandal, Gopanpally Village, Hyderabad 500046, India
2 shared publicationsDipak Maity
Tata Institute of Fundamental Research (TIFR)
2 shared publicationsJanmey Jay Panda
Tata Institute of Fundamental Research (TIFR)
2 shared publications
Latest Publications
- 20 August 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (35) , 13401-13409
Valley Engineering of Monolayer MoS2 via Substitutional Cr and V Dopants and the Mechanistic Insights
MoS2 monolayers (MS) having magnetic impurities as dopants can bring about time-reversal asymmetry and hence room temperature magnetism. Here, we demonstrated the synthesis of Cr substitutionally doped (∼1%) MS (CrMS) along with its vanadium-doped MS counterpart (VMS) and investigated their suitability for valleytronics by studies based on chirality-selective photoluminescence, time-resolved transient absorption spectroscopy, and spin Hall effect of light (SHEL). While VMS showed room temperature valley splitting, no such shift was observed in CrMS although with their expected similarity. Density-functional-theory-based electronic structure calculations indicate a Cr-induced flat band below the Fermi level, even at ∼0.5 atom % doping, which masks the splitting in the energies of the K-point valleys. This finding is in tune with the experimental studies while in contrast to the theoretical and experimental data of VMS. Hence, this study establishes band valley tunabilities of MoS2, and SHEL as a powerful tool for valley polarization studies.
- 20 August 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (35) , 13401-13409
Valley Engineering of Monolayer MoS2 via Substitutional Cr and V Dopants and the Mechanistic Insights
MoS2 monolayers (MS) having magnetic impurities as dopants can bring about time-reversal asymmetry and hence room temperature magnetism. Here, we demonstrated the synthesis of Cr substitutionally doped (∼1%) MS (CrMS) along with its vanadium-doped MS counterpart (VMS) and investigated their suitability for valleytronics by studies based on chirality-selective photoluminescence, time-resolved transient absorption spectroscopy, and spin Hall effect of light (SHEL). While VMS showed room temperature valley splitting, no such shift was observed in CrMS although with their expected similarity. Density-functional-theory-based electronic structure calculations indicate a Cr-induced flat band below the Fermi level, even at ∼0.5 atom % doping, which masks the splitting in the energies of the K-point valleys. This finding is in tune with the experimental studies while in contrast to the theoretical and experimental data of VMS. Hence, this study establishes band valley tunabilities of MoS2, and SHEL as a powerful tool for valley polarization studies.
- 1 December 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (12)
High sensitivity direct magnetic field detection based metrology for ultra-thin magnetic films and Li-ion cells
Ultra-low magnetic field sensing is emerging as a tool for materials’ diagnostics, particularly for the operando studies of electrochemical systems. A magnetic metrology system having the capability of sensing fields as low as ∼1.88 pT has been setup for such studies using a commercial atomic magnetometer. The magnetometer setup is isolated from environmental perturbations, such as mechanical vibrations, electrical noises, and ambient magnetic fields, in order to measure small signals from the samples under study. Magnetic field measurements on ferromagnetic (permalloy, Ni0.8Fe0.2) thin films, monolayers of MoS2, vanadium doped MoS2, and lithium electro-deposited copper electrodes are performed to demonstrate the sensitivity of the setup. Magnetic field scanning of commercial Li-ion cells has also been performed using this magnetic metrology method, indicating the scope of the setup for operando diagnostics.
- 1 December 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (12)
High sensitivity direct magnetic field detection based metrology for ultra-thin magnetic films and Li-ion cells
Ultra-low magnetic field sensing is emerging as a tool for materials’ diagnostics, particularly for the operando studies of electrochemical systems. A magnetic metrology system having the capability of sensing fields as low as ∼1.88 pT has been setup for such studies using a commercial atomic magnetometer. The magnetometer setup is isolated from environmental perturbations, such as mechanical vibrations, electrical noises, and ambient magnetic fields, in order to measure small signals from the samples under study. Magnetic field measurements on ferromagnetic (permalloy, Ni0.8Fe0.2) thin films, monolayers of MoS2, vanadium doped MoS2, and lithium electro-deposited copper electrodes are performed to demonstrate the sensitivity of the setup. Magnetic field scanning of commercial Li-ion cells has also been performed using this magnetic metrology method, indicating the scope of the setup for operando diagnostics.
- 11 May 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 19 (5) , 054040
Single-Beam Room-Temperature Atomic Magnetometer with Large Bandwidth and Dynamic Range
We present a single-beam atomic magnetometer operating at room temperature for the measurement of ac magnetic fields. The magnetometer functions in the nonlinear regime of magneto-optical rotation of atomic vapor without any buffer gases. We demonstrate a sensitivity of approximately at 2 kHz and a large bandwidth of 24 kHz. The dynamic range of measurement is , making the sensor effective even in Earth’s field. We present the signal-to-noise and bandwidth characteristics of the system for both shielded and unshielded modes of operation. Moreover, we perform theoretical analysis for the atom-light system for the single-laser-beam configuration. The effect of light intensity and detuning on the magnetometer is studied theoretically as well as experimentally to understand the strengths and limitations of the technique.- 11 May 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 19 (5) , 054040
Single-Beam Room-Temperature Atomic Magnetometer with Large Bandwidth and Dynamic Range
We present a single-beam atomic magnetometer operating at room temperature for the measurement of ac magnetic fields. The magnetometer functions in the nonlinear regime of magneto-optical rotation of atomic vapor without any buffer gases. We demonstrate a sensitivity of approximately at 2 kHz and a large bandwidth of 24 kHz. The dynamic range of measurement is , making the sensor effective even in Earth’s field. We present the signal-to-noise and bandwidth characteristics of the system for both shielded and unshielded modes of operation. Moreover, we perform theoretical analysis for the atom-light system for the single-laser-beam configuration. The effect of light intensity and detuning on the magnetometer is studied theoretically as well as experimentally to understand the strengths and limitations of the technique.- 16 August 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 132 (7) , 075302
High-sensitivity characterization of ultra-thin atomic layers using spin-Hall effect of light
The fast-emerging diverse applications using a variety of magnetic/non-magnetic heterostructure ultra-thin films warrant the sensitive characterization of the electrical, optical, and magnetic properties of the interface. As a practical alternate to the conventional magneto-optic Kerr effect (MOKE) method, we propose and demonstrate the spin-Hall effect of the light (SHEL)-based MOKE method with competitive sensitivity and scope for further improvement. The SHEL-MOKE technique is a versatile surface characterization tool for studying materials’ magnetic and dielectric ordering, which are extracted from the variations to the phase-polarization characteristics of a focused beam of light reflected at the interface, as a function of the applied magnetic field. Using this technique, we measure the magnetic field dependent complex Kerr angle and the coercivity in ultra-thin films of permalloy (Py) and at molybdenum disulfide (MoS )—permalloy (MSPy) hetero-structure interfaces. A comprehensive theoretical model and simulation data are provided to strengthen the potential of this simple non-invasive optical method. The theoretical model is subsequently applied to extract the optical conductivity of non-magnetic ultra-thin layers of MoS .- 16 August 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 132 (7) , 075302
High-sensitivity characterization of ultra-thin atomic layers using spin-Hall effect of light
The fast-emerging diverse applications using a variety of magnetic/non-magnetic heterostructure ultra-thin films warrant the sensitive characterization of the electrical, optical, and magnetic properties of the interface. As a practical alternate to the conventional magneto-optic Kerr effect (MOKE) method, we propose and demonstrate the spin-Hall effect of the light (SHEL)-based MOKE method with competitive sensitivity and scope for further improvement. The SHEL-MOKE technique is a versatile surface characterization tool for studying materials’ magnetic and dielectric ordering, which are extracted from the variations to the phase-polarization characteristics of a focused beam of light reflected at the interface, as a function of the applied magnetic field. Using this technique, we measure the magnetic field dependent complex Kerr angle and the coercivity in ultra-thin films of permalloy (Py) and at molybdenum disulfide (MoS )—permalloy (MSPy) hetero-structure interfaces. A comprehensive theoretical model and simulation data are provided to strengthen the potential of this simple non-invasive optical method. The theoretical model is subsequently applied to extract the optical conductivity of non-magnetic ultra-thin layers of MoS .- 13 June 2022
- Published by American Physical Society (APS) in Physical Review A
- Vol. 105 (6) , 063509
Nonlinear magnetoelectric effect in atomic vapor and its application to precision radio-frequency magnetometry
We demonstrate the nonlinear magnetoelectric (ME) effect in atomic vapor achieved through the parametric interaction of optical electric and radio-frequency (rf) magnetic fields leading to the generation of new optical electric fields. Density matrix calculations are performed to validate the experimental results. Moreover, the predicted dependence of the generated optical electric field amplitudes on the rf magnetic field strength is experimentally verified to confirm the ME effect. The system provides a technique for precision rf magnetometry based on this phenomenon. We could experimentally achieve an rf magnetic field sensitivity of 70 at 1 kHz to 7.5 at 3 MHz for zero bias field in an unshielded environment. The appealing features of the proposed rf magnetometer using our system include a high dynamic range up to , 6 dB bandwidth of 450 kHz, and arbitrary frequency resolution, which are intrinsic to the nonlinear ME effect in the medium.- 13 June 2022
- Published by American Physical Society (APS) in Physical Review A
- Vol. 105 (6) , 063509
Nonlinear magnetoelectric effect in atomic vapor and its application to precision radio-frequency magnetometry
We demonstrate the nonlinear magnetoelectric (ME) effect in atomic vapor achieved through the parametric interaction of optical electric and radio-frequency (rf) magnetic fields leading to the generation of new optical electric fields. Density matrix calculations are performed to validate the experimental results. Moreover, the predicted dependence of the generated optical electric field amplitudes on the rf magnetic field strength is experimentally verified to confirm the ME effect. The system provides a technique for precision rf magnetometry based on this phenomenon. We could experimentally achieve an rf magnetic field sensitivity of 70 at 1 kHz to 7.5 at 3 MHz for zero bias field in an unshielded environment. The appealing features of the proposed rf magnetometer using our system include a high dynamic range up to , 6 dB bandwidth of 450 kHz, and arbitrary frequency resolution, which are intrinsic to the nonlinear ME effect in the medium.- Open Access
High-Sensitivity Characterization of Ultra-Thin Atomic Layers using Spin-Hall Effect of Light
Magnetic/non-magnetic/heterostructured ultra-thin films' characterisation is highly demanding due to the emerging diverse applications of such films. Diverse measurements are usually performed on such systems to infer their electrical, optical and magnetic properties. We demonstrate that MOKE-based spin-Hall effect of light (SHEL) is a versatile surface characterization tool for studying materials' magnetic and dielectric ordering. Using this technique, we measure magnetic field dependent complex Kerr angle and the coercivity in ultra-thin films of permalloy (Py) and at molybdenum disulphide (MoS$_2$) - permalloy (MSPy) hetero-structure interfaces. The measurements are compared with standard magneto-optic Kerr effect (MOKE) studies to demonstrate that SHEL-MOKE is a practical alternative to the conventional MOKE method, with competitive sensitivity. A comprehensive theoretical model and simulation data are provided to further strengthen the potential of this simple non-invasive optical method. The theoretical model is applied to extract the optical conductivity and susceptibility of non-magnetic ultra-thin layers such as MoS$_2$ .
Open AccessHigh-Sensitivity Characterization of Ultra-Thin Atomic Layers using Spin-Hall Effect of Light
Magnetic/non-magnetic/heterostructured ultra-thin films' characterisation is highly demanding due to the emerging diverse applications of such films. Diverse measurements are usually performed on such systems to infer their electrical, optical and magnetic properties. We demonstrate that MOKE-based spin-Hall effect of light (SHEL) is a versatile surface characterization tool for studying materials' magnetic and dielectric ordering. Using this technique, we measure magnetic field dependent complex Kerr angle and the coercivity in ultra-thin films of permalloy (Py) and at molybdenum disulphide (MoS$_2$) - permalloy (MSPy) hetero-structure interfaces. The measurements are compared with standard magneto-optic Kerr effect (MOKE) studies to demonstrate that SHEL-MOKE is a practical alternative to the conventional MOKE method, with competitive sensitivity. A comprehensive theoretical model and simulation data are provided to further strengthen the potential of this simple non-invasive optical method. The theoretical model is applied to extract the optical conductivity and susceptibility of non-magnetic ultra-thin layers such as MoS$_2$ .
- Open Access
- 8 March 2022
- Published by Elsevier in Journal of Magnetic Resonance Open
- Vol. 10-11
Solid-state NMR signals at zero-to-ultra-low-field
- 8 March 2022
- Published by Elsevier in Journal of Magnetic Resonance Open
- Vol. 10-11
Open AccessSolid-state NMR signals at zero-to-ultra-low-field
- Open Access
- 23 November 2020
- Published by Oxford University Press (OUP) in Oxford Open Materials Science
- Vol. 1 (1)
Graphene oxide-based rechargeable respiratory masks
Respiratory masks having similar standards of ‘N95’, defined by the US National Institute for Occupational Safety and Health, will be highly sought after, post the current COVID-19 pandemic. Here, such a low-cost (∼$1/mask) mask design having electrostatic rechargeability and filtration efficiency of >95% with a quality factor of ∼20 kPa−1 is demonstrated. This filtration efficacy is for particles of size 300 nm. The tri-layer mask, named PPDFGO tri, contains nylon, modified polypropylene (PPY), and cotton nonwoven fabrics as three layers. The melt-spun PPY, available in a conventional N95 mask, modified with graphene oxide and polyvinylidene fluoride mixture containing paste using a simple solution casting method acts as active filtration layer. The efficacy of this tri-layer system toward triboelectric rechargeability using small mechanical agitations is demonstrated here. These triboelectric nanogenerator (TENG)-assisted membranes have high electrostatic charge retention capacity (∼1 nC/cm2 after 5 days in ambient condition) and high rechargeability even in very humid conditions (>80% RH). A simple but robust permeability measurement set up is also constructed to test these TENG-based membranes, where a flow rate of 30–35 L/min is maintained during the testing. Such a simple modification to the existing mask designs enabling their rechargeability via external mechanical disturbances, with enhanced usability for single use as well as for reuse with decontantamination, will be highly beneficial in the realm of indispensable personal protective equipment.
- 23 November 2020
- Published by Oxford University Press (OUP) in Oxford Open Materials Science
- Vol. 1 (1)
Open AccessGraphene oxide-based rechargeable respiratory masks
Respiratory masks having similar standards of ‘N95’, defined by the US National Institute for Occupational Safety and Health, will be highly sought after, post the current COVID-19 pandemic. Here, such a low-cost (∼$1/mask) mask design having electrostatic rechargeability and filtration efficiency of >95% with a quality factor of ∼20 kPa−1 is demonstrated. This filtration efficacy is for particles of size 300 nm. The tri-layer mask, named PPDFGO tri, contains nylon, modified polypropylene (PPY), and cotton nonwoven fabrics as three layers. The melt-spun PPY, available in a conventional N95 mask, modified with graphene oxide and polyvinylidene fluoride mixture containing paste using a simple solution casting method acts as active filtration layer. The efficacy of this tri-layer system toward triboelectric rechargeability using small mechanical agitations is demonstrated here. These triboelectric nanogenerator (TENG)-assisted membranes have high electrostatic charge retention capacity (∼1 nC/cm2 after 5 days in ambient condition) and high rechargeability even in very humid conditions (>80% RH). A simple but robust permeability measurement set up is also constructed to test these TENG-based membranes, where a flow rate of 30–35 L/min is maintained during the testing. Such a simple modification to the existing mask designs enabling their rechargeability via external mechanical disturbances, with enhanced usability for single use as well as for reuse with decontantamination, will be highly beneficial in the realm of indispensable personal protective equipment.
- Open Access
Ultra-sensitive Single-beam Atom-optical Magnetometer using Weak Measurement Method
Ultra-sensitive measurement of the magneto-optical rotation, due to interaction of linearly-polarized light passing through room-temperature Rb 85 atoms, in response to change in longitudinal magnetic field (\delta B_z ) is demonstrated using the weak measurement method. The polarization rotation angle measurement sensitivity (\delta \psi ) of 16 \mu~rad and hence of the magnetometer of 1 nT, achieved using the weak measurement method is better than the balanced optical polarimetry results by a factor of three. The improvement in the measurement sensitivity is realized via optical amplification of the polarization rotation angle via spin-orbit coupled light beam-field. The method is devoid of external rf modulation, allows for optimal tunability of sensitivity depending on the dynamic range of the applied magnetic field and the sensitivity can be further enhanced by operating in the Spin Exchange Relaxation Free regime of alkali spin polarization.
Open AccessUltra-sensitive Single-beam Atom-optical Magnetometer using Weak Measurement Method
Ultra-sensitive measurement of the magneto-optical rotation, due to interaction of linearly-polarized light passing through room-temperature Rb 85 atoms, in response to change in longitudinal magnetic field (\delta B_z ) is demonstrated using the weak measurement method. The polarization rotation angle measurement sensitivity (\delta \psi ) of 16 \mu~rad and hence of the magnetometer of 1 nT, achieved using the weak measurement method is better than the balanced optical polarimetry results by a factor of three. The improvement in the measurement sensitivity is realized via optical amplification of the polarization rotation angle via spin-orbit coupled light beam-field. The method is devoid of external rf modulation, allows for optimal tunability of sensitivity depending on the dynamic range of the applied magnetic field and the sensitivity can be further enhanced by operating in the Spin Exchange Relaxation Free regime of alkali spin polarization.