Zhou Fang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Zhou Fang has a total of 66 co-authors. Here are the top co-authors by number of shared publications:
- Xianning Li
Southeast Univ
11 shared publications - Hui Wang
State Key Laboratory of Eco-hydraulics in Northwest Arid Region of China, Xi’an University of Technology, Xi’an 710048, China
6 shared publications Xian Cao
6 shared publicationsHui Wang
4 shared publications- Xian Cao
School of Energy and Environment, Southeast University, Nanjing 210096, China
4 shared publications - Debin Liu
Institute of Water Science in Coastal Regions of Jiangsu Province, Dongtai 224200, China
2 shared publications
Latest Publications
- Open Access
Adsorption of Heavy Metal Pb(II) in Dredged Sediment Using Different Biochar Materials
China generates a significant amount of dredged sediment annually, much of which is contaminated with heavy metals. This study investigates the adsorption of Pb(II) from water and dredged sediment using different biochar materials, including BC and HC. The results show that the maximum adsorption of Pb(II) by BC-350-2h and HC-350-1:2-0.5h was 9.90 mg/g and 9.95 mg/g, respectively, with adsorption efficiencies of 99.0% and 99.5% for a 50 mg/L Pb(II) solution at a dosing concentration of 5 g/L, under 10 min of adsorption. BC-350-2h effectively adsorbed Pb(II) from dredged sediment, with no detectable Pb(II) concentration in the liquid fraction of the dredged sediment after 20 days. However, when the adsorption time increased, a small portion of Pb migrated into an unstable form, probably due to its binding to dissolved organic carbon (DOC), which dissolves out of the biochar. Microbial activity may also contribute to the degradation of DOC into small-molecule dissolved organic carbon (SDOC), thereby reducing the binding strength of biochar to DOC, which adsorbs Pb(II). This study highlights the importance of considering the effects of DOC and the long-term stability of biochar when used to treat contaminated dredged sediment.
Open AccessAdsorption of Heavy Metal Pb(II) in Dredged Sediment Using Different Biochar Materials
China generates a significant amount of dredged sediment annually, much of which is contaminated with heavy metals. This study investigates the adsorption of Pb(II) from water and dredged sediment using different biochar materials, including BC and HC. The results show that the maximum adsorption of Pb(II) by BC-350-2h and HC-350-1:2-0.5h was 9.90 mg/g and 9.95 mg/g, respectively, with adsorption efficiencies of 99.0% and 99.5% for a 50 mg/L Pb(II) solution at a dosing concentration of 5 g/L, under 10 min of adsorption. BC-350-2h effectively adsorbed Pb(II) from dredged sediment, with no detectable Pb(II) concentration in the liquid fraction of the dredged sediment after 20 days. However, when the adsorption time increased, a small portion of Pb migrated into an unstable form, probably due to its binding to dissolved organic carbon (DOC), which dissolves out of the biochar. Microbial activity may also contribute to the degradation of DOC into small-molecule dissolved organic carbon (SDOC), thereby reducing the binding strength of biochar to DOC, which adsorbs Pb(II). This study highlights the importance of considering the effects of DOC and the long-term stability of biochar when used to treat contaminated dredged sediment.
- Open Access
- 21 March 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (7) , 2815
Sustainable Utilization of Dewatered Sewage Sludge via Hydrothermal Conversion: Focus on Steroid Transformation
With the acceleration of urbanization, the disposal of dewatered sewage sludge (DSS) has become an urgent environmental issue worldwide. Hydrothermal conversion (HC) of DSS is an important method for sludge sustainable utilization due to its combination of efficiency and economic and environmental advantages. This study investigates the product distribution and composition of products during the HC of DSS under subcritical and supercritical water conditions (200–450 °C, 5–90 min), with a particular focus on the formation and conversion mechanisms of steroid compounds. The results indicate that increasing temperature and reaction time leads to a rise in gas-phase products (GPs) and a corresponding decline in solid-phase products (SPs), with phenolic compounds identified as the predominant constituents. In the water-soluble products (WSPs), nitrogen-containing cyclic compounds are the major products. Saturated nitrogen heterocycles dominate at lower temperatures (200 °C), while at elevated temperatures (300–350 °C), saturated azapolycyclic compounds emerge, ultimately transitioning into unsaturated aromatic nitrogen heterocycles at 450 °C. Steroids are primarily concentrated in the oil-phase products (OPs). The conversion process involves the initial conversion of lipids in the DSS to long-chain olefins at 200 °C, which are then converted to steroids at 250–350 °C. At higher temperatures (400–450 °C), these steroids might decompose into gaseous products or undergo polymerization to form char. This suggests the potential for steroids to act as precursor compounds in the process of char formation. This work could contribute to a deeper understanding of the HC mechanism of DSS and provide valuable technical insights for improving bio-oil quality.
- 21 March 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (7) , 2815
Open AccessSustainable Utilization of Dewatered Sewage Sludge via Hydrothermal Conversion: Focus on Steroid Transformation
With the acceleration of urbanization, the disposal of dewatered sewage sludge (DSS) has become an urgent environmental issue worldwide. Hydrothermal conversion (HC) of DSS is an important method for sludge sustainable utilization due to its combination of efficiency and economic and environmental advantages. This study investigates the product distribution and composition of products during the HC of DSS under subcritical and supercritical water conditions (200–450 °C, 5–90 min), with a particular focus on the formation and conversion mechanisms of steroid compounds. The results indicate that increasing temperature and reaction time leads to a rise in gas-phase products (GPs) and a corresponding decline in solid-phase products (SPs), with phenolic compounds identified as the predominant constituents. In the water-soluble products (WSPs), nitrogen-containing cyclic compounds are the major products. Saturated nitrogen heterocycles dominate at lower temperatures (200 °C), while at elevated temperatures (300–350 °C), saturated azapolycyclic compounds emerge, ultimately transitioning into unsaturated aromatic nitrogen heterocycles at 450 °C. Steroids are primarily concentrated in the oil-phase products (OPs). The conversion process involves the initial conversion of lipids in the DSS to long-chain olefins at 200 °C, which are then converted to steroids at 250–350 °C. At higher temperatures (400–450 °C), these steroids might decompose into gaseous products or undergo polymerization to form char. This suggests the potential for steroids to act as precursor compounds in the process of char formation. This work could contribute to a deeper understanding of the HC mechanism of DSS and provide valuable technical insights for improving bio-oil quality.
- 10 September 2024
- Published by Elsevier in Analytica Chimica Acta
- Vol. 1329, 343230
Long-term deployment of commonly used DGT devices for trace element measurement across laboratory and field settings
- 10 September 2024
- Published by Elsevier in Analytica Chimica Acta
- Vol. 1329, 343230
Long-term deployment of commonly used DGT devices for trace element measurement across laboratory and field settings
- 18 February 2023
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (17) , 51061-51074
DGT method for the in situ measurement of triazines and the desorption kinetics of atrazine in soil
Triazines are frequently detected in nature water and agricultural soils worldwide. They are considered harmful to plants, animals, and the human health. In this study, diffusive gradients in thin films (DGT) method was developed for the assessment of several triazines. DGT device was used for the in situ measurement of atrazine in a pesticide factory and obtained reliable data. The atrazine concentrations measured by DGT, and solvent extraction method was in a constant ratio. The DIFS model was coupled with DGT technique to study the desorption kinetics of atrazine in four kinds of different soils. The yellow–brown soil was more inclined to adsorb atrazine than other three soils. 2_D DIFS model was used to obtain the partition coefficient for labile atrazine (Kdl), the values of the response time (Tc), and desorption/adsorption rates (k1 and k−1). The yellow–brown soil has a larger labile pool size, and a faster resupply speed of atrazine. The 1_D DIFS model was used to simulate the profiles of atrazine concentrations in soil solution and solid phase. The results show that the desorption of atrazine in soil was limited by kinetic limitation at short time, and was limited by the solid phase reservoir at long time.
- 18 February 2023
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (17) , 51061-51074
DGT method for the in situ measurement of triazines and the desorption kinetics of atrazine in soil
Triazines are frequently detected in nature water and agricultural soils worldwide. They are considered harmful to plants, animals, and the human health. In this study, diffusive gradients in thin films (DGT) method was developed for the assessment of several triazines. DGT device was used for the in situ measurement of atrazine in a pesticide factory and obtained reliable data. The atrazine concentrations measured by DGT, and solvent extraction method was in a constant ratio. The DIFS model was coupled with DGT technique to study the desorption kinetics of atrazine in four kinds of different soils. The yellow–brown soil was more inclined to adsorb atrazine than other three soils. 2_D DIFS model was used to obtain the partition coefficient for labile atrazine (Kdl), the values of the response time (Tc), and desorption/adsorption rates (k1 and k−1). The yellow–brown soil has a larger labile pool size, and a faster resupply speed of atrazine. The 1_D DIFS model was used to simulate the profiles of atrazine concentrations in soil solution and solid phase. The results show that the desorption of atrazine in soil was limited by kinetic limitation at short time, and was limited by the solid phase reservoir at long time.
- Open Access
- 3 October 2019
- Published by Nanyang Technological University
Energy-efficient automated material handling systems
- 3 October 2019
- Published by Nanyang Technological University
Open AccessEnergy-efficient automated material handling systems
- 7 September 2019
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 53 (19) , 11223-11231
Development and Application of the Diffusive Gradients in Thin-Films Technique for Measuring Psychiatric Pharmaceuticals in Natural Waters
Psychiatric pharmaceuticals are widely distributed in the aquatic environment and have attracted recent attention due to their potential for environmental effects. A robust and reliable in situ passive sampling approach, the diffusive gradients in thin-films (DGT) technique, is developed here to measure 14 psychiatric pharmaceuticals. A new binding material, mixed-mode cation exchange resin (Poly-Sery MCX, 40μm, CNW, Germany), was used for the first time in DGT and compared to XAD and HLB. Reliable elution efficiencies of the pharmaceuticals from the binding gels were obtained in methanol/ammonia and diffusion coefficients for all the compounds were determined. The influence of diffusive layer thickness (0.515−2.015 mm), deployment time (3−168 h), and important environmental conditions – pH (3.02−9.45), ionic strength (0.0001−0.5 M) and dissolved organic matter (0−20 mg L−1) - were evaluated. The capacity of XAD, HLB and MCX gels for binding all the test pharmaceuticals was ~335 μg per disc, meaning that DGT could theoretically be deployed for over 30 months, if there are no competitive effects or confounding factors. The uptake kinetics of psychiatric pharmaceuticals onto MCX gel were much faster than to XAD and HLB gels in the first hour. DGT measured concentrations of test pharmaceuticals at two sample points in a river (over 6 days) were comparable to those obtained by grab sampling. This study demonstrates the accuracy and reliability of DGT for measuring psychiatric pharmaceuticals across the wide range of freshwater conditions found in the natural environment.
- 7 September 2019
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 53 (19) , 11223-11231
Development and Application of the Diffusive Gradients in Thin-Films Technique for Measuring Psychiatric Pharmaceuticals in Natural Waters
Psychiatric pharmaceuticals are widely distributed in the aquatic environment and have attracted recent attention due to their potential for environmental effects. A robust and reliable in situ passive sampling approach, the diffusive gradients in thin-films (DGT) technique, is developed here to measure 14 psychiatric pharmaceuticals. A new binding material, mixed-mode cation exchange resin (Poly-Sery MCX, 40μm, CNW, Germany), was used for the first time in DGT and compared to XAD and HLB. Reliable elution efficiencies of the pharmaceuticals from the binding gels were obtained in methanol/ammonia and diffusion coefficients for all the compounds were determined. The influence of diffusive layer thickness (0.515−2.015 mm), deployment time (3−168 h), and important environmental conditions – pH (3.02−9.45), ionic strength (0.0001−0.5 M) and dissolved organic matter (0−20 mg L−1) - were evaluated. The capacity of XAD, HLB and MCX gels for binding all the test pharmaceuticals was ~335 μg per disc, meaning that DGT could theoretically be deployed for over 30 months, if there are no competitive effects or confounding factors. The uptake kinetics of psychiatric pharmaceuticals onto MCX gel were much faster than to XAD and HLB gels in the first hour. DGT measured concentrations of test pharmaceuticals at two sample points in a river (over 6 days) were comparable to those obtained by grab sampling. This study demonstrates the accuracy and reliability of DGT for measuring psychiatric pharmaceuticals across the wide range of freshwater conditions found in the natural environment.
- 24 July 2018
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 90 (16) , 10016-10023
Novel Method for in Situ Monitoring of Organophosphorus Flame Retardants in Waters
Widespread use of organophosphorus flame retardants (OPFRs) and their ubiquity in water results in the need for a robust and reliable monitoring technique to better understand their fate and environmental impact. In situ passive sampling using the diffusive gradients in thin-films (DGT) technique provides time-integrated data and is developed for measuring OPFRs here. Ultrasonic extraction of binding gels in methanol provided reliable recoveries for all tested OPFRs. Diffusion coefficients of TCEP, TCPP, TDCPP, TPrP, TBP, and TBEP in the agarose diffusive gel (25 °C) were obtained. The capacity of an HLB binding gel for OPFRs was >115 μg per disc, and the binding performance did not deteriorate with time up to 131 days. DGT performance is independent of typical environmental ranges of pH (3.12–9.71), ionic strength (0.1–500 mmol L–1), and dissolved organic matter (0–20 mg L–1), and also of diffusive layer thickness (0.64–2.14 mm) and deployment time (3–168 h). Negligible competition effects between OPFRs was found. DGT-measured concentrations of OPFRs in a wastewater treatment plant (WWTP) effluent (12–16 days) were comparable to those obtained by grab sampling, further verifying DGT’s reliability for measuring OPFRs in waters.
- 24 July 2018
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 90 (16) , 10016-10023
Novel Method for in Situ Monitoring of Organophosphorus Flame Retardants in Waters
Widespread use of organophosphorus flame retardants (OPFRs) and their ubiquity in water results in the need for a robust and reliable monitoring technique to better understand their fate and environmental impact. In situ passive sampling using the diffusive gradients in thin-films (DGT) technique provides time-integrated data and is developed for measuring OPFRs here. Ultrasonic extraction of binding gels in methanol provided reliable recoveries for all tested OPFRs. Diffusion coefficients of TCEP, TCPP, TDCPP, TPrP, TBP, and TBEP in the agarose diffusive gel (25 °C) were obtained. The capacity of an HLB binding gel for OPFRs was >115 μg per disc, and the binding performance did not deteriorate with time up to 131 days. DGT performance is independent of typical environmental ranges of pH (3.12–9.71), ionic strength (0.1–500 mmol L–1), and dissolved organic matter (0–20 mg L–1), and also of diffusive layer thickness (0.64–2.14 mm) and deployment time (3–168 h). Negligible competition effects between OPFRs was found. DGT-measured concentrations of OPFRs in a wastewater treatment plant (WWTP) effluent (12–16 days) were comparable to those obtained by grab sampling, further verifying DGT’s reliability for measuring OPFRs in waters.