APAna María Page

Ana María Page

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ana María Page has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fatigue design sensitivities of large monopile offshore wind turbines

    by Stian H. Sørum, George Katsikogiannis, Erin E. Bachynski‐Polić, Jørgen Amdahl, Ana M. Page, Rasmus T. Klinkvort

    The input for fatigue analyses of offshore wind turbines is typically chosen based on design values provided by design standards. While this provides a straightforward design methodology, the contribution of different input parameters to the uncertainty in the fatigue damage estimates is usually unknown. This knowledge is important to have when improving current designs and methodologies, and the parameters governing the uncertainty is typically found through a sensitivity analysis. Several sensitivity studies have been performed for monopile‐based offshore wind turbines, typically focusing on specific turbines and engineering disciplines. This paper performs a sensitivity study for three monopile‐based offshore wind turbines (5 MW, 10 MW, 15 MW) using parameters from several engineering disciplines. The results show that the fatigue utilization is primarily governed by the uncertainty in the SN curves and fatigue capacity. Following this, the uncertainty in the environmental conditions is the dominating uncertainty, with wind loads becoming increasingly important as turbine size increases. Additionally, the effect of modelling uncertainties is investigated. The wind‐related model uncertainties dominate in the tower top, while uncertainties in the wave and soil models dominate in the tower base and monopile. Designers wanting to reduce the uncertainty in a design are recommended to focus on the environmental conditions, and using as accurate models as possible. All modelling uncertainties are significant, but research should particularly be focused on wave directionality and soil models.


  • Open Access

    Evaluation of soil models for improved design of offshore wind turbine foundations in dense sand

    by Hans Petter Jostad, Birgitte Misund Dahl, Ana Page, Nallathamby Sivasithamparam, Hendrik Sturm

    In order to perform optimised and safe design of foundations for offshore wind turbines (OWT), it is important to have calculation tools that describe the key features of water-saturated soil subjected to complex and irregular loading over a wide range of strain levels. Soils subjected to cyclic loading are prone to strain accumulation. The accumulated (plastic) volumetric strain may result in excess pore pressure or stress relaxation, which will reduce the effective stresses, stiffness and strength of the material. Strain accumulation in dense sand is a complex mechanism of deformation and it is challenging to describe it properly. Four different soil models to describe the stress–strain relationships of dense sand are evaluated in this paper: two implicit models that follow the actual stress history and two explicit models that calculate the accumulated strains as a function of number of cycles. These models are first evaluated on the basis of their theoretical framework and back-calculations of laboratory tests specifically carried out for the design of OWT foundations in dense sand. Second, the models are implemented in finite-element analyses and evaluated on the basis of the analyses of an OWT monopile subjected to different loading conditions.


  • Open Access

    Fatigue sensitivity to foundation modelling in different operational states for the DTU 10MW monopile-based offshore wind turbine

    by George Katsikogiannis, Erin E. Bachynski, Ana M. Page

    The importance of foundation modelling for the support-structure fatigue damage estimation of a 10 MW monopile based offshore wind turbine is investigated in different operational states and wind-wave misalignment conditions. Three different models are used: (1) a non-linear elasto-plastic model including hysteretic behaviour effects, (2) a linear elastic model and (3) a non-linear elastic model, using numerical simulations with an aero-hydro-servo-elastic computational tool. Depending on the environmental condition, different dynamic processes dominate the responses. For parked states, deviations between models up to 160% were found. For wind wave-misalignment over 30° in operational cases, differences up to 180% were found for low sea states and 119% for high sea sates. Both nonlinear foundation damping and stiffness formulation have considerable effect on the responses, with hysteretic effects becoming crucial when aerodynamic damping is negligible in the direction of the response. Attention is required when comparing the fatigue damage only at the mudline, as larger variations between the models may occur in the embedded part of the monopile, where the absolute maximum is found.


  • REDWIN Foundation Models for Integrated Dynamic Analyses of Offshore Wind Turbines

    by Ana M. Page, Karin Norén-Cosgriff, Kristoffer S. Skau, Amir M. Kaynia

    Due to the complex nature of the loads on Offshore Wind Turbines (OWTs), accurate and optimized design of these structures require integrated simulation tools that can properly capture the various structural interactions governing the response. Considerable progress has been made in recent years on developing proper models for coupled aerodynamic and hydrodynamic loads together with advanced control systems for turbines. These efforts have resulted in a suite of aero-servo-hydro-elastic numerical simulation codes available to the industry. However, proper foundation models have been lagging behind in these tools despite availability of various advanced nonlinear models for foundations in general. This has led to uneconomical design of OWTs that have consistently failed to reproduce the measured natural frequencies and can negatively affect the design and structural performance of OWTs. This paper presents a library of recently developed foundation models based on the theory of plasticity together with their verification against large-scale field test data. These models are cast in the framework of macro-elements that represent the nonlinear response of the soil-foundation system due to arbitrary coupled loads at the seabed. The paper also presents results of the numerical simulations of the dynamic response of a monopile-based OWT in the North Sea using an aero-servo-hydro-elastic code and comparison with the data collected from one of the instrumented OWTs in the field. It is further presented how the characteristics of the measured dynamic response change with loading over a long period and the way the response characteristics relate to the basic features of the developed models.


  • Dynamic Response of a Large-Diameter Monopile Considering 35-Hour Storm Conditions

    by Erin E. Bachynski, Ana Page, George Katsikogiannis

    As a part of the assessment of foundation resistance for monopiles, several offshore wind standards prescribe symmetric 35-hour (or 42-hour) storm sequences in terms of wind speed and significant wave height. The temporal evolution of the peak period is not specified explicitly in the standards, despite the fact that large monopile wind turbines are sensitive to the wave period. In the present work, the storm sequences according to the standards are first compared to hindcast data for intermediate water depth locations in the North Sea. An alternative storm sequence is proposed based on the hindcast data, and possible values of the peak period evolution are proposed for the standard models. The responses of a 10 MW monopile wind turbine are then computed for both the standard and proposed sequences using a time domain aero-hydro-servo-elastic code coupled to a macro element model for the soil-structure interaction. The resulting mudline load cycles are then compared for the different storm sequences.


  • A Family of Practical Foundation Models for Dynamic Analyses of Offshore Wind Turbines

    by Ana María Page, Arnkjell Løkke, Kristoffer Skjolden Skau, Jacobus Bernardus De Vaal

    The concept of macro-element modelling – which was first introduced almost 30 years ago – has proven to be a convenient and accurate technique for modelling offshore foundations, but historically these models have mainly been used for academic purposes. Recent developments in foundation modelling now allow for application of such models in engineering practise and design. One such example is the family of new macro-element models that have been developed in the research project REDWIN to represent the foundation behaviour in dynamic analyses of Offshore Wind Turbines (OWTs). These models exhibit characteristic foundation behaviour such as nonlinearity, coupling of the load from different load components and hysteretic load dependent damping. This paper presents two of the REDWIN models, one applicable for monopile foundations and one for skirted suction caisson foundations. Use of the models are demonstrated through two practical problems that reflect typical design analyses of OWTs: the first example shows a fatigue damage assessment for a monopile, and the second considers an extreme load event for a suction bucket jacket. The structural response is computed using the REDWIN foundation models and compared with the response based on distributed API p-y springs for the monopile and clamped legs at seabed for the jacket. Special emphasis is devoted to how the model input is obtained to guide readers on practical use of the models.

  • Impact of foundation modelling in offshore wind turbines: Comparison between simulations and field data

    by Ana M. Page, Veronika Næss, Jacobus B. De Vaal, Gudmund R. Eiksund, Tor Anders Nygaard


  • A macro-element model for multidirectional cyclic lateral loading of monopiles in clay

    by Ana M. Page, Gustav Grimstad, Gudmund R. Eiksund, Hans Petter Jostad


  • A macro-element pile foundation model for integrated analyses of monopile-based offshore wind turbines

    by Ana M. Page, Gustav Grimstad, Gudmund Reidar Eiksund, Hans Petter Jostad


  • Open Access

    REDWIN –REDucing cost in offshoreWINd by integrated structural and geotechnical design

    by K S Skau, A M Page, A M Kaynia, F Løvholt, K Norén-Cosgriff, H Sturm, H S Andersen, T A Nygard, H P Jostad, G Eiksund, et al.

    The cost of offshore wind energy production has to be reduced continuously to improve its competitiveness compared to other energy sources. To contribute to this goal, a 4-year research project REDWIN – REDucing cost of offshore WINd by structural and geotechnical integrated design – is currently ongoing, addressing the challenge of integrating the geotechnical discipline in the design process. The project aims to develop foundation and soil models to be used in dynamic time-domain analyses of offshore wind turbine structures. A library of models has been developed for representation of the most common foundation types. The models can be applied to different ground conditions by site-specific model input. To make the models applicable for practical usage, it has been important to balance the need for computational effectiveness against the need for accuracy. Studies so far indicate that the foundation models improve the accuracy in the integrated analyses.