RARagini Acharya

Ragini Acharya

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Ragini Acharya has a total of 62 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Predictive cost adaptive control of shock-boundary-layer interaction in a scramjet inlet

    by Jacob C. Vander Schaaf, Ragini Acharya, Dennis S. Bernstein

    A scramjet inlet provides shock compression to provide high-pressure air to the combustor for burning fuel and generating thrust. Shock boundary-layer interaction (SBLI) at the surface of the inlet can result in flow separation at the inlet wall yielding undesirable effects including inlet buzz and unstart. This work presents an adaptive feedback control technique, predictive cost adaptive control (PCAC), coupled with computational fluid dynamics (CFD) to limit the adverse effects of SBLI with flow control methods. A coupling code between PCAC and CFD was developed to provide a closed-loop code between the control and CFD code (CFD-C). A Mach 2.5 inlet has been utilized for demonstration and boundary-layer bleed has been utilized as the actuation mechanism for reducing the flow separation due to SBLI. PCAC learned the relevant system dynamics using the computed wall pressure data provided to PCAC at regular time intervals during the real-time closed-loop operation eliminating the need for any prior modeling of the system. Bleed mass flow rate was calculated by PCAC and provided to CFD via the CFD-C code. Since the control algorithm presented in this work does not require calibration and prior modeling of the system, it can be impactful under varying operating conditions. This capability has been demonstrated while the inlet is operated under different angles of attack: 0°, 10°, and 15°. The results have demonstrated that the recirculation zone generated due to separation of the boundary-layer in each case was reduced once closed-loop adaptive feedback control with PCAC was applied.


  • Open Access

    Computational Investigations and Control of Shock Interference

    by Cameron Alexander, Ragini Acharya

    Computational fluid dynamics (CFD) has aided the development, design, and analysis of hypersonic airbreathing propulsion technologies, such as scramjets. The complex flow field in a scramjet isolator has been the subject of intense interest and study for several decades. Many features of this flow field also occur in supersonic wind-tunnel nozzles and diffusers. Computational analysis of these topics has frequently provided immense insight into the actual functionality and performance. Research presented in this work supports scientific investigation and understanding of a less-researched topic, which is shock–shock interference and interaction with the boundary layer in supersonic internal flows, as well as the passive control of its adverse effects to prevent the onset of unstart in a scramjet isolator. This computational investigation is conducted on a backpressured isolator and a modified three-dimensional shock-tube to represent a scramjet isolator with ram effects provided by high-pressure gas and high-speed flow provided by a supersonic inflow. Computational results for the backpressured isolator have been validated against available measured time-averaged wall pressure data. The modified shock-tube provided an opportunity to study the shock–shock interference and shock–boundary-layer interaction effects that would occur in a scramjet isolator or a ram-accelerator when the high-speed flow from the inlet interacted with the shock produced due to the combustor pressure traveling and meeting in the isolator. An assessment of wall cooling effects on these phenomena is presented for both the backpressured isolator and the modified shock-tube.

  • Open Access

    Identification and Assessment of Scramjet Isolator Unstart and Operability Metrics

    by Ragini Acharya

    Computational fluid dynamics (CFD) simulations play a strong role in the design and development of aerospace and defense vehicles, including high-speed applications where testing under the correct operational conditions is not yet viable. In this study, metrics for the onset of isolator unstart are identified. An assessment of the variance of operating variables and their impact on metrics for the onset of isolator unstart and operability metrics was performed, utilizing a nozzle–isolator assembly from NASA Langley Research Center as a demonstration case. The effects of increasing backpressure ratio and decreasing inflow Mach number on these metrics and the underlying contributions of shock physics were investigated in detail. A major conclusion from this study is that both inflow Mach number and backpressure ratio can strongly impact pseudo shock train and shock–boundary layer interactions inside the isolator, but inflow Mach number has a stronger impact than the backpressure ratio. The research presented in this paper demonstrates that the isolator performance can shift from start to unstarted and operable to inoperable with a small variance in operating conditions. Another important insight presented in this research is that the length of the pseudo shock train and the Mach stem height change discontinuously with both the backpressure ratio and the inflow Mach number. Therefore, the length of the pseudo shock train and height of the Mach stem are strong indicators of the onset of unstart, which is an important consequence for instrumentation and closed-loop adaptive feedback control system design for scramjet flight operations.


  • Open Access

    Computational Investigations and Control of Shock Interference

    by Cameron Alexander, Ragini Acharya

    Computational fluid dynamics (CFD) has aided the development, design, and analysis of hypersonic air-breathing propulsion technologies, such as scramjets. The complex flow field in a scramjet isolator has been the subject of intense interest and study for several decades. Many features of this flow field also occur in supersonic wind tunnel nozzles and diffusers. Computational analysis of these topics has frequently provided immense insight into the actual functionality and performance. Research presented in this work supports scientific understand- ing of shock interference and passive control of the adverse effects of shock-wave boundary layer interaction to prevent onset of unstart in a scramjet isolator by computational investigations by using a backpressured isolator and a modified three-dimensional shock-tube to represent scramjet isolator with ram effects pro- vided by high-pressure gas and high-speed flow provided by a supersonic inflow. Computational results for the backpressured isolator have been validated against experimental data. In addition, the modified shock tube provided an opportunity to study the shock interference and shock-boundary layer interaction effects that would occur in a scramjet isolator or a ram-accelerator when the high speed flow from the inlet interacted with the shock produced due to the combustor pressure traveling and meeting in the isolator. An assessment of wall cooling effects on these phenomena is presented for both backpressured isolator and the modified shock-tube.

  • Development of Uncertainty Quantification Framework Applied to Scramjet Unstart Challenge

    by Ragini Acharya, Paul P. Palies, Joseph A. Schetz, John D. Schmisseur, Christopher Roy, William Oberkampf, Anirban Chaudhuri, Garrett Waycaster, Taiki Matsumura, Nathaniel B. Price, et al.


  • Lean Fully Premixed Injection for Commercial Jet Engines: An Initial Design Study

    by Paul Palies, Ragini Acharya, Andreas Hoffie, Matthew Thomas

    This article presents the results of an initial design study for a lean fully premixed (LFP) injector for commercial jet engine. The operating point considered is that of an high overall pressure ratio, small core engine at take-off condition. To perform this feasibility study, multiple relevant constraints are taken into account. The three-unit fully premixed injector has been designed by utilizing numerical simulations. The first unit of the injector is intended to perform complete fuel vaporization through heat transfer from the compressed air to the liquid fuel via a compact onboard heat exchanger. The second unit is designed to ensure premixing of the fully evaporated fuel and the air. Finally, the third unit ensures additional premixing and stability of the premixed swirling flame. The autoignition challenge associated with the design of the LFP injector is discussed in this article. The computational modeling approach that was used to design the units of the LFP injector is presented.


  • COUPLING OF TRANSIENT THERMAL AND MECHANICAL STRESSES COMPUTATIONS IN GRAPHITE NOZZLE MATERIALS

    by Ragini Acharya, Brian Evans, Jonathan Pitt, Francesco Costanzo, Kenneth K. Kuo

    In this work, a numerical simulation of the structural response of the graphite nozzle materials to the flow during the ignition transient of a solid rocket motor is considered. The measured pressure–time trace within the combustion chamber was used as an input parameter in the graphite-nozzle erosion minimization (GNEM) code to calculate gas-phase pressure, temperature, velocity, etc. in the graphite nozzle. The calculated pressure and convective heat flux from GNEM were applied as loading conditions in an associated thermo-structural model to obtain response of graphite nozzle materials to the transient pressure and thermal loading. The combined aero–thermo–structural response of the graphite rocket nozzle showed that the thermal stresses were significantly higher than the mechanical stresses. The radial displacements of inner nozzle surface showed that the nozzle diameter increases in the beginning due to thermo-mechanical stresses. The axial displacements of several points on the inner nozzle surface showed that the surface tends to displace toward the entrance plane.

  • Open Access

    Applications of Turbulent and Multiphase Combustion

    by Kenneth K. Kuo, Ragini Acharya