LZLei Zhao

Lei Zhao

*This is an algorithmically generated author record based on publicly available information.

Lei Zhao has a total of 42 co-authors. Here are the top co-authors by number of shared publications:

  • Li Wei

    Yancheng Polytech Coll, Sch Text & Clothing, Yancheng 224005, Peoples R China

    11 shared publications
  • Jumei Zhao

    School Textile and Clothing, Yancheng Polytechnic College, Yancheng, China

    8 shared publications
  • Weiqing Jiang

    School Textile and Clothing, Yancheng Polytechnic College, Yancheng, China

    7 shared publications
  • Hongtao Zhou

    Jiangsu Province Engineering Research Center of Biomass Functional Textile Fiber Development and Application, Department of Textile and Clothing, Yancheng Polytechnic College, Yancheng, China

    6 shared publications
  • Ting Zhu

    Textile and Clothing College, Yancheng Polytechnic College, Yancheng, China

    6 shared publications
  • Jun Wang

    Guangdong Wonder Testing International CO., Ltd., Guangzhou, China

    5 shared publications

Latest Publications

  • Open Access

    Finite element analysis of ballistic penetration of trace fragments on aramid UD cloth

    by Jumei Zhao, Weiqing Jiang, Lei Zhao, Chunqin Ma, Qihu Bu, Ni Qi, Yuankun Liu

    The finite element method is used to analyze the failure deformation and determine the V50 value of aramid UD cloth (Uni-Directional Fabric) under 1.1 g fragment ballistic impact, and the numerical results are basically consistent with the actual experimental results. The paper concludes that the numerical method can be used to optimize the aramid UD cloth, it can more intuitively see the whole ballistic penetration process, provide accurate design methods for better applications of aramid UD cloth in the field of ballistic protection, and provide theoretical basis and data support for practical structural design.


  • Open Access

    Preparation and adsorption application of PLA/GO/PDA nanofiber membrane

    by Li Wei, Lei Zhao, Xun Zhu, Jihuan He, Danni Yu, Qingsong Zhao, Kuikui Zong, Chunxia Wang, Chunqin Ma, Qihu Bu

    In this study, polylactic acid/graphene oxide/Dopamine (PLA/GO/DA) porous nanofiber membrane was prepared by electrospinning. L16(43) orthogonal experiment was designed to investigate the effects of reaction temperature, reaction time, and DA concentration on the adsorption performance of DA oxidized and self-polymerized on the fiber. Based on the characterization of scanning electron microscopy and the determination of the adsorption performance of the fiber membrane to methylene blue (MB) dye, data visualization analysis, variance analysis, and F-test were conducted to determine the optimal process parameters: reaction temperature of 45 °C, reaction time of 30 h, and DA concentration of 2 mg ml−1. PLA/GO/PDA(Polydopamine) nanofiber was prepared and characterized under the optimal process parameters. The results showed that the average diameter of the PDA-loaded nanofiber increased from 737 nm to 996 nm, and a layer of PDA with a thickness of about 129 nm was loaded on the outer surface of the fiber, making the contact angle of the fiber membrane with 0° and becoming a hydrophilic material. In adsorption performance testing of MB, the PLA/GO/PDA nanofiber membrane prepared based on the PLA/GO/DA fiber membrane with an adsorption rate of 98.81 % in 24 h was superior to the PLA/GO/PDA nanofiber membrane prepared based on the PLA/GO fiber membrane.


  • Open Access

    The bubble electrostatic spraying a new technology for fabrication of superhydrophobic nanofiber membranes

    by Li Wei, Lei Zhao, Ting Zhu, Qianwen Wang, Jumei Zhao

    Researchers are excited about the latest advances in the long needle electrospinning and the bubble electrospinning, which have triggered wide-spread concern. This paper offers a new angle for modifying both methods, the former is developed into a modified one with an auxiliary helix needle, which is used for fabrication of super-hydrophobic polyvinylidene difluoride-copolypolyhexafluoropropylene nanofiber membrane (PH-E membrane for short), and the latter is extended to a bubble electrostatic spaying, which is used for spraying PDMS microspheres on the PH-E membrane surface, and the resultant membrane is called as the PDMS-PH-E membrane. Both membranes hydrophobicity, surface roughness, porosity, and wetting property are measured and compared, and the drop impact dynamical property of the PDMS-PH-E membrane has opened the path for a new way to design of self-clearing and anti-fouling and anti-wetting surfaces. Far-reaching applications of the membranes include energy harvesting devices and sensors. We anticipate this article to be a starting point for more sophisticated study of the bubble electrostatic spaying and PDMS-PH-E membrane advanced applications.


  • Open Access

    A spider-inspired electrospinning for fabrication of polyvinylidene fluoride nanofiber membranes

    by Lei Zhao, Ting Zhu, Qianwen Wang, Li Wei, Jumei Zhao, Jun Wang

    This paper is to mimic the long transporting process of proteins in the spider spinning, and a long and helical needle electrospinning technology is proposed, the polyvinylidene fluoride solution is used to study the effects of needle helix spirals on the micromorphology, mechanical property, electrical property, porosity, and hydrophobic property of polyvinylidene fluoride nanofiber membranes. The results showed that there is a threshold value for the helix spirals helical pitch, and its spider-inspired mechanism is discussed.


  • Open Access

    Preparation and properties of PVA nanofibers with spiral ordered internal structure

    by Lei Zhao, Ting Zhu, Li Wei, Qianwen Wang, Jumei Zhao, Shixiong Yi, Jun Wang

    The spinning solution of PVA(polyvinyl alcohol) was chosen as the spiral spinning research object. With enough needle length, the macromolecules were straightened and aligned under laminar flow theory. The spiral spinning needle controlled the spiral twisting of the straightened macromolecules. The motion trajectory of titanium dioxide(nanoparticles) in nanofibers was photographed by TEM(transmission electron microscope) under the action of spiral centripetal force, which directly verified the feasibility of the spiral spinning principle. The greater the number of spiral spinning needles, the tighter the spiral arrangement inside the nanofibers and the greater the crystallinity of the nanofibers. The SEM(scanning electron microscope) observation revealed that the diameter of nanofibers had a relationship with the number of spiral spinning needles. When the spiral number of spinning needle was 13, the tensile and bursting properties of the nanofiber membrane were optimal, but when the spiral number of spinning needle was 19, the pore structure, electrical resistance, and antibacterial properties of the nanofiber membrane were optimal.


  • Open Access

    Research of different needle length on properties of PVDF nanofiber membrane based on long-needle electrospinning technology

    by Lei Zhao, Ting Zhu, Li Wei, Jumei Zhao, Jihuan He, Shixiong Yi, Jun Wang, Tianchi Zhou, Lu Cai, Chenghui Zheng

    In this paper, we combine electrospinning with laminar flow theory to verify the influence of the spinning needle length on the internal structure of PVDF (polyvinylidene fluoride) nanofibers. The long spinning needle is referred as a reference like long ducts in the body of spiders. We also discussed the effect of different needle length on the micro-morphology, mechanical properties, electrical properties, porosity, and hydrophobic properties of PVDF nanofiber membranes. The results showed that when the needle length increased, more PVDF macromolecular chains will have sufficient time to be straightened and aligned, resulting in an increasingly ordered internal structure of the prepared PVDF nanofibers. The different length of the long needle has a certain influence on the morphology, mechanical properties, electrical properties, porosity, and hydrophobic properties of PVDF nanofiber membrane obtained by electrospinning. The more ordered the internal structure of nanofibers, the worse the membrane’s mechanical properties, but the lower its electrical resistivity.


  • Open Access

    Preparation and properties of PAN nanofiber membrane based on spiral spinning technology

    by Lei Zhao, Ting Zhu, Li Wei, Jumei Zhao, Qianwen Wang, Jun Wang

    The PAN spinning solution was chosen as the spiral spinning research object. Laminar flow theory was used to straighten and align macromolecules, and spiral spinning needles were used to control the spiral twisting of straightened PAN macromolecules. The internal spiral arrangement of PAN nanofibers became more compact as the helix number of spinning needles increased. The TEM (transmission electron microscope) was used to photograph the motion trajectory of TiO2 (titanium dioxide) nanoparticles in nanofibers, which directly confirmed the feasibility of the spiral spinning principle. SEM (Scanning Electronic Microscopy) observations revealed that the appearance of the PAN nanofiber membranes changed to some extent under spiral physical technology. The analysis of the tensile and bursting properties of PAN nanofiber membranes demonstrated that the structure of the nanofibers changed significantly after spiral spinning. The pore structure, electrical resistance, and antibacterial properties of PAN nanofiber membrane all reached optimal values at the optimal helix number of spinning needle.


  • Open Access

    Biomimetic electrospinning for fabrication of poly(lactic acid)/graphite oxide/poly(dopamine) nanofiber membrane

    by Ting Zhu, Lei Zhao, Manyu Qian, Danni Yu, Jihuan He, Weiqing Jiang, Jun Wang, Shuqiang Wang

    As a new preparation process of nanofibers, electrospinning technology developed by bionic spider spinning can further improve the molecular structure and mechanical properties of nanofibers, and obtain nanofibers and base membrane products with better mechanical properties. The spider spinning needs minimal energy consumption though it has a very long liquid transport tube. Because spider silk has high mechanical properties and wide industrial applications, so a kind of new biomimetic electrospinning technology which harnessed a very long spiral-needle was proposed. Then poly(lactic acid)PLA/graphite oxide(GO)/dopamine (DA) nanofiber membrane was fabricated by the new biomimetic electrospinning technology. The results showed that compared with the pure PLA nanofiber membranes, the average pore size of PLA/GO porous nanofiber membranes decreased, the total number of pores increased, and the fracture strength and elongation at break increased. At the same time, the spun nanofibers were also more uniform. The pore size distribution of nanofiber was more dense after adding DA, and the fracture strength and elongation at break of nanofiber increased, while the nanofiber was also more even. After adding DA, the fracture strength was greatly increased and the elongation at break was similar to that of pure PLA nanofiber. The nanofiber membrane was obtained after oxidative polymerization of DA into poly(dopamine) (PDA), a layer of nanofiber membrane was attached to the surface of nanofiber. The performance of PLA/GO/PDA nanofiber membranes prepared based on PLA/GO/DA nanofiber membranes was superior to that of PLA/GO/PDA nanofiber membranes prepared based on PLA/GO nanofiber membranes, and its adsorption rate after 24 h was as high as 98.81%.


  • Open Access

    Comparative analysis of experimental results and finite element simulation results of ballistic impact on 3D woven reinforced composites

    by Fei Qian, Lei Zhao, Shengzhong Zhang, Guixiang Yao, Yuankun Liu

    In this work, the finite element software (ABAQUS) was used to build a single-cell model based on three-dimensional woven reinforced composite and investigate the propagation of stress waves in the composite. The experimental results of the edge part of the bullet after impact with the results of simulations were compared, and the final damage pattern of three-dimensional woven reinforced composite with commonly used laminates were also comparatively studied. The results indicated that the peak stress of the bullet in the three-dimensional woven reinforced composite increased with increasing incident velocity and was reflected back and forth. The fracture of the reinforcement yarn was rougher after the bullet was ejected from the lower surface of the three-dimensional woven reinforced composite than from the incident upper surface. Delamination did not occur within the three-dimensional woven reinforced composite, and the observed damage holes were generally consistent with the graphs simulated using finite element software. The research in this paper provides a design method for the application of three-dimensional orthogonal hybrid woven reinforced composites in ballistic protection. The experimental results and corresponding calculation methods can guide the design of high-performance protective armor.


  • Open Access

    Fitness analysis of experimental results and finite element simulation results about bullet velocity based on ABAQUS simulation for impact of three dimensional woven reinforced composite

    by Fei Qian, Lei Zhao, Li Wei, Shengzhong Zhang, Guixiang Yao, Yuankun Liu

    Four layers of glass fiber filaments with the fineness of 2400 tex were used as warp yarns, five layers of glass filaments with the fineness of 600 tex were used as weft yarns 110 tex and aramid fibers were used as Z yarns to process a three-dimensional woven reinforcement. Then, 307-3 unsaturated polyester resin was used as the matrix, and the three-dimensional woven reinforced composite was prepared by the VARTM method (resin transfer molding method). The bullet impact composite was modeled by ABAQUS (Finite element software). The starting conditions of the bullet incidence and the actual conditions were set consistently to analyze the change of the remaining velocity and acceleration of the bullet and the worth energy loss after the bullet impact. The results showed that the theoretical and experimental values of bullet incidence velocity and residual bullet velocity were linearly related. When the impact velocity of bullet incidence was higher, the slope of the straight line of the initial phase of bullet velocity decrease was larger, and the peak of the absolute value of acceleration after bullet impact was larger. The calculated value of energy loss after bullet impact simulation is basically consistent with the experimental value, This also fully proved that the bullet impact composite material model established was correct and effective.