VMVadim I. Malarev

Vadim I. Malarev

*This is an algorithmically generated author record based on publicly available information.

Vadim I. Malarev has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigation on Vapor Diffusion Resistance Factor in Porous Materials

    by A. Kopteva, V. Malarev, V. Koptev

    In the study of heat insulation properties of porous materials, simulation methods that account for both the structure of the porous material and the processes of heat and mass transfer occurring therein are widely employed. In this paper, the effective thermal conductivity of such a heterogeneous system is determined based on the methods of generalized conductivity and reduction to a unit cell. The analysis of heat and mass transfer processes in a multicomponent system is conducted by reducing it to a binary system comprising a solid skeleton and pore space. The thermal conductivity component within the pore space is dependent upon the temperature and structural characteristics of the material, the tortuosity of the pores, and the narrowing of the pore channels. This is typically characterized by a parameter known as the diffusion resistance factor, μ. This factor is an important characteristic of various heat-insulating and construction materials, and thus the development of engineering methods for calculating this parameter is a matter of urgency. In this study, a methodology for calculating μ is proposed. This methodology involves the use of a unit cell comprising a porous material with an interpenetrating structure. The unit cell is separated into two sections: one impermeable to diffusing vapor current streams (termed "adiabatic splitting") and the other perpendicular to vapor flow and exhibiting the same concentration value on its surface (termed "isothermal splitting"). The "combined" method of splitting, which employs sections of both types, yielded the most robust correlation with experimental data. Experimental studies of the thermal conductivity (λ) of wet porous materials have demonstrated that at a specific temperature, the value of λ is independent of moisture content. This indicates that in this instance, the thermal conductivity of the vapor-air mixture within the pore space is equivalent to the thermal conductivity of the liquid phase, particularly that of water.This fact enables the determination of μ for a porous material through the measurement of its thermal conductivity at varying humidity and temperature levels. The λ of the test samples was determined by means of a comparative λ-calorimeter, which has been specifically designed to study the heat-conducting properties of dispersed materials within the range from 0.04 to 80 W/(m·K). The practical consequence of the proposed studies is to guarantee energy savings and a reduction in heat losses when utilising or processing composite materials, which are multicomponent and inhomogeneous systems. Examples of such materials include composite building materials and oil-bearing rocks.

  • Open Access

    Electro Steam Thermal Complex Powered by Wind-Driven Generator for the Treatment of the Oil Formation’s Bottomhole Area

    by A A Belsky, V S Dobush, V I Malarev

    In this article authors propose application of the wind-driven power units as power source of bottomhole electric steam generator for the thermal high-viscosity oil reservoir stimulation. The structure of the electro steam thermal complex is proposed. An analysis of the wind energy potential in the areas where the largest high-viscosity oil deposits in Russia are located is carried out. As part of the complex under consideration, the type of the dependence of the bottomhole electric steam generator’s power on the formation depth has been established. The calculation of the required installed capacity of wind power plants for placement as part of the electro steam thermal complex at the largest high-viscosity oil deposits in Russia has been performed.


  • Open Access

    Development of a system for automated control of oil transportation in the Arctic region to prevent the formation of paraffin deposits in pipelines

    by Alexandra Kopteva, Vladimir Koptev, Vadim Malarev, Taisiya Ushkova

    The paper introduces a unique methodology of preventing and controlling the formation of paraffin deposits in oil pipelines, which is a matter of urgency in regions with negative temperatures, including the Arctic regions. The paper presents the configuration and specific parameters of the developed measuring unit. The proposed measuring unit is capable of detecting the formation of a paraffin layer during its early stages and predicting its composition. Simultaneous use of two radioisotope sensors allows increasing the performance capabilities of the measuring unit, namely to detect the formation of a paraffin layer in the early stages and to issue a signal to amplify the control signal to control the oil pipeline paraffinisation. In addition, the use of a radioisotope unit instead of a single sensor will increase the accuracy of component-wise flow rate measurement, by making an allowance for paraffin deposits formation. The use of customized information processing algorithms also allows determining oil viscosity with high accuracy. The paper deals with an optimization of a system for automated control of a promising method of electric heating via the skin-cables, wherein safety factors of up to 36% are currently used, i.e. in most cases, 1/3 excess electric power is generated. The safety of using the radioisotope measuring technique is proven.


  • Open Access

    The system of trigeneration with binary cycle for use as an energy source for gas fuel

    by B N Abramovich, I A Bogdanov, A V Kopteva, V I Malarev

    The article describes the relevance of the problem of increasing the efficiency of fuel and energy complexes, based on the energy strategy of Russia for 2030. A review of various methods of air cooling for a more intense combustion process in a gas turbine plant is carried out and the most optimal one is chosen. The paper presents a model of the system of automatic control of the air cooling of the heat exchanger of a gas turbine unit to ensure the conditions of the nominal mode of operation when weather conditions change.


  • Open Access

    Development of a power transformer residual life diagnostic system based on fuzzy logic methods

    by T S Ivanova, V I Malarev, A V Kopteva, V Yu Koptev

    The existing methods of diagnostics and control of a power transformer residual life have been studied. The results of developing a new diagnostic system, which is introduced into a tree structure of the automated system for monitoring and control of transformers and implemented via the data mining of errors based on fuzzy logic, are presented. Operating with fuzzy sets and introducing linguistic variables, an algorithm was created using a tree structure, which is translated into a program code. The system operation principle is shown using the selected diagnostic parameters of a power oil transformer.


  • Open Access

    Calculation of Oil-saturated Sand Soils’ Heat Conductivity

    by J. Sobota, V. I. Malarev, A. V. Kopteva

    Nowadays, there are significant heavy high-viscosity oil reserves in the Russian Federation with oil recovery coefficient not higher than 0.25-0.29 even with applying modern and efficient methods of oil fields development. Thermal methods are the most promising out of the existing ways of development, main disadvantage of which is large material costs, leading to the significant rise in the cost of extracted oil. Thus, creating more efficient thermal methods and improving the existing ones, is the task of great importance in oil production. One of the promising trends in enhancing thermal methods of oil recovery is the development of bottomhole electric steam generators. Compared to the traditional methods of thermal-steam formation treatment, which involve steam injection from surface, well electrothermal devices can reduce energy losses and improve the quality of steam injected into the formation. For successful and efficient organization of oil production and rational development of high-viscosity oil fields using well electrothermal equipment, it is necessary to take into account the pattern of heat propagation, both in the reservoir and in the surrounding space, including the top and bottom. One of the main values characterizing this process is the heat conductivity λ of oil-bearing rocks. The article describes composition of typical oil-saturated sand soils, presents studies of heat and mass transfer in oil-saturated soils, reveals the effect of various parameters on the heat conductivity of a heterogeneous system, proposes a method for calculating the heat conductivity of oil-bearing soils by sequential reduction of a multicomponent system to a two-component system and proves the validity of the proposed approach by comparing acquired calculated dependencies and experimental data.


  • Studying the Operating Mode of the Down-Hole Electrode Heater for the Production of High-Viscosity Oil

    by Eduard A. Zagrivnyi, Vadim I. Malarev, Alexandra V. Kopteva

    The paper presents thermal calculation of one of the most promising methods to date for producing high-viscosity oil, namely, the down-hole electrode heater, taking into account the dependence of the working fluid electro-physical properties on temperature, enabling thermal treatment of bottom-hole zone of high-viscosity oil formation. The paper shows that taking into account the dependence of the working fluid electro-physical properties on temperature allows treating high-viscosity oil formations at depths of more than 1000 meters at higher temperatures, thereby increasing the efficiency of the entire process.


  • Open Access

    Electric Drive Simulation for Drilling Machine Spinner

    by V I Malarev, A V Kopteva, R A Nogtev

    The present work discloses the scheme of the automated control system that allows automated leaving the vibration mode by the drilling machine with the indirect vibration measuring method. In addition, the system allows entering the constant power method by the engine. This paper presents a system simulation and reveals that the machine spinner electric drive engine facilitates operating the working branch of mechanical characteristics in the mode of maintaining the set speed to the maximum torque (power specified), followed by moving into the constant power mode that facilitates moving the machine off the vibration zone by means of a small decrease of the drilling string rotation frequency. The article proves that the most radical automation approach suggests using the asynchronous engine drive vector control system in a manner that provides the best regulation accuracy possible.


  • Electric Power Supply System Development for Down-hole Electric Steam Generators to Produce High-viscosity Oil

    by Vadim I. Malarev, Alexandra V. Kopteva, Vladimir Yu. Koptev

    The aim of the research conducted was to determine the impact of a down-hole electro-thermal complex heating element operation on the quality of electric power in distribution networks of 35 kV under the insulated neutral mode and of 110 kV under the dead-grounded neutral mode. The paper deals with various options for controlling the power transmitted to the heating element, discloses phase control and integer control methods, as well as advantages and disadvantages thereof.