MEMojtaba Eftekhari

Mojtaba Eftekhari

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mojtaba Eftekhari has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Physics-Informed Neural Networks Techniques for Analyzing Forced Vibrations of Simply Supported Beams Featuring Variable Cross-Sections

    by S. M. Sahebdad, M. Eftekhari

    This research explores the forced vibrations of isotropic beams with variable cross-sections, modeled by the Euler-Bernoulli beam theory. Using Hamilton's principle, the governing partial differential equations are derived, and the complex vibrational behaviors were analyzed. By introducing physics-informed neural networks (PINNs) as an innovative, mesh-free solution technique, the study highlights their ability to provide rapid and precise results by integrating physical laws directly into the machine learning framework. Compared to traditional methods like finite element (FEM) or finite difference schemes, PINNs significantly streamline the computational process by eliminating the need for mesh generation, which simplifies implementation and reduces computational effort, validation with the 6th-order Galerkin method and FEM confirms the high accuracy and efficiency of the proposed approach for analyzing vibrations in beams with varying cross-sections. Overall, this work enhances the application of PINNs in vibration assessment and offers valuable insights for optimizing design and performance across diverse engineering domains, including structural and mechanical systems.


  • Nonlinear Behaviors of Pipe Conveying Fluid with Retaining Clip in Supercritical Regime

    by Mahdi Gholami, Mojtaba Eftekhari

    This study explores the nonlinear dynamic behavior of a clamped-clamped pipe conveying fluid and equipped with a retaining clip, subjected to primary resonance under external excitation. The presence of the intermediate clip introduces significant complexity, especially when fluid velocity exceeds the critical threshold. The governing nonlinear equation of motion is derived using Hamilton’s principle and converted via Galerkin’s method into a set of nonlinear ordinary differential equations. These equations are then analyzed using the method of multiple scales. The analysis focuses on the supercritical flow regime and investigates frequency and force response characteristics. Internal resonance at a 2:1 ratio is studied across varying clip stiffness levels. Furthermore, the impact of clip stiffness, damping coefficient, and detuning parameters on Hopf bifurcation, saddle-node behavior, and system responses is examined. This study reveals that increasing clip stiffness elevates critical velocities and induces complex dynamics, including internal resonance and transitions to multiperiodic and quasiperiodic behaviors. The findings underscore the need for precise tuning of stiffness and damping to ensure system stability and avoid undesired responses.


  • Parametric and primary resonances of a rotating shaft under the harmonic electromagnetic loads

    by Malihe Eftekhari, Mojtaba Eftekhari, Mohammad Hosseini

    This study presents a comprehensive investigation of the nonlinear dynamic responses of an eccentric rotating shaft characterized by geometric and inertial nonlinearities subjected to harmonic electromagnetic excitation. The governing nonlinear partial differential equations are reduced to ordinary differential equations through the Galerkin method, allowing for a streamlined analysis of the system’s behavior. To enhance the understanding of the system’s dynamics, the method of multiple scales is utilized to derive solvability conditions, leading to the formulation of frequency–amplitude curves across primary and parametric resonance scenarios. Our detailed analysis reveals the intricate interplay of various parameters, including the magnetic load parameter and the amplitude and frequency of the electromagnetic excitation. Notably, numerical simulations demonstrate the emergence and disappearance of the double jump phenomenon in both forward and backward modes under resonance conditions. Additionally, Hopf bifurcation points are identified, indicating transitions in the system’s stability and the emergence of periodic solutions.


  • Free vibration of flexible two links manipulator with variable cross-sectional areas

    by Mani Masoumi, Nima Kohansal, Mojtaba Eftekhari

    This paper demonstrated the free vibration of a planar two-link flexible manipulator with harmonic drivers and non-uniformity in the cross-section of links. A dynamic model has been developed that incorporates flexibilities in both link and joint experiencing harmonic vibration, with joint flexibility modeled as torsional spring-inertia components combination. Two links were modeled based on Von Karman’s nonlinear strain relations and theory of the Euler-Bernoulli beam. The nonlinear governing equations were derived using the extended Hamilton’s principle for planar two-link flexible manipulators with variable cross-sections for each link. The coefficients of the obtained partial differential equations were as a function of spatial coordinates and were reduced to the ordinary differential equations for a family of cross-section geometries with exponentially varying widths of rectangular sections of each link. The frequency equation was obtained and analytical solutions of the vibration were achieved for different exponential shapes of each link (widening and narrowing beam for each link). Natural frequencies and mode shapes were presented for varying cross-section areas of the links. The effects of the end masses, payload, beam mass density, flexural rigidity ratio, and joint frequency were investigated on the mode shapes and natural frequencies when the power of the exponential function of the cross-sectional areas of two links was varied. The numerical results were verified with experimental results.


  • Nonlinear behaviors and chaos control of a fluid-conveying piezoelectric pipe in supercritical regime

    by Mj Pourmohammadi, Mojtaba Eftekhari

    The study investigated the steady state response of a piezoelectric pipe conveying fluid under external and internal resonances in the supercritical regime of fluid velocity. Internal resonance conditions between the first and second frequency modes were studied at a specific flow velocity in the supercritical regime. The Galerkin method and the multiple scale method were used to extract the vibration amplitude versus the excitation frequency and amplitude. The steady state solutions lost stability through saddle-node and Hopf bifurcations, leading to periodic, double periodic, multi-periodic, and chaotic behaviors in the forced and frequency response curves. Time response, FFT, phase portrait, and Lyapunov exponents were presented to predict the unstable regions of the piezo-pipe system between the Hopf points. The Wolf algorithm was utilized to evaluate the Lyapunov exponents. Additionally, a fuzzy terminal sliding mode controller was designed in the chaotic region of the piezoelectric pipe conveying fluid, and its parameters were optimized using the genetic algorithm. The controller effectively stabilized the chaotic motion of the system, demonstrating better performance than the sliding mode control in numerical results.


  • Nonlinear Phase Angle and Amplitude Analysis of Porous Functionally Graded Material Rotating Shaft Under Electromagnetic Loads

    by Malihe Eftekhari, Mojtaba Eftekhari, Mohammad Hosseini

    In this research, the nonlinear response including amplitude and phase angle of a functionally graded inextensional rotating shaft is studied under the electromagnetic load. Three types of porosity distributions through the radial direction are considered in this work. For the rotating shaft with nonlinear curvature and inertia, the governing equations and corresponding boundary conditions are derived. The Galerkin and the multiple scales methods are used to obtain the modulation equations. The effect of the power law index for a functionally graded shaft fabricated from the mixture of ceramic and metal is presented in the frequency response diagrams for primary resonance under electromagnetic force. Numerical simulations include the effects of the power law index of functionally graded material (FGM), porosity distribution, air-gap length, electromagnetic load, and vibration modes of a rotor on the phase angle and amplitude of steady state responses.


  • Application of Type-1 Fuzzy Terminal and Fast Terminal Sliding Mode Controllers for tracking the Stewart Manipulator

    by M. J. Pourmohammadi, M. Eftekhari

    In this paper, Finite-time control design of the Stewart mechanism is performed using the Type-1 Fuzzy terminal and Type-1 Fuzzy fast terminal sliding mode controllers. Manipulator has six hydraulic jacks or linear actuators and top plate has six degrees of freedom. Fuzzy boundary layer and fuzzy sliding surface are defined for the controllers to decrease the chattering and oscillation of the actuators. The dynamic equations are derived using the Lagrange method by applying the uncertainties and the super-twisting observer is developed to estimate the velocity of the hydraulic jacks. For eliminating undesirable chattering phenomena using the fuzzy logic, a set of type-1 fuzzy rules is used in such a way that approximates the boundary layer of the sliding surface. Moreover for better performance tracking of the controllers, the parameters of the terminal and fast terminal sliding mode controllers are optimized using the genetic algorithm. Integral of absolute error was defined as objective function. Simulations present the good performance of the fuzzy controllers in tracking the desired path of the top plate, high robustness in the presence uncertainty and reduction of noisy sensors.


  • Stability analysis of rotating shaft under electromagnetic and bearing oil-film forces

    by Mojtaba Eftekhari, Malihe Eftekhari, Asghar Dashti Rahmatabadi

    The stability of the fixed pints of a flexible rotor supported by journal bearings is investigated through the Bifurcation diagrams. In this paper the effect of nonlinear electromagnetic harmonic force is added to the simultaneous consideration of the effects of the nonlinearity in curvature and inertia, mass eccentricity and hydrodynamic forces of the journal bearings. Solution of the Reynolds equation renders the pressure distribution in the bearings. The bearing forces are found from integrating the pressure distribution on the surface of bearings. Derivation of the equations is performed using the Hamilton's principle and the nonlinearity terms are related to the eccentricity and the curvature of shaft. Primary and combination resonances are imposed to the rotor-bearing system and steady state responses show the effects of magnetic and bearing forces on the stability of amplitudes. In combination resonance, frequency of the electromagnetic load is tuned as the average of the forward and backward natural frequencies of the rotor. Existence of unstable Hopf points demonstrates that periodic, quasi-periodic and chaotic motions may be arisen in the nonlinear behavior of rotor.