Gang Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gang Sun has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Ji Zhou
College of Engineering, College of Smart Agriculture (College of Artificial Intelligence), Academy for Advanced Interdisciplinary Studies, Nanjing Agricultural University , Nanjing 210095
6 shared publications - Qiang Zhao
National Center for Gene Research, State Key Laboratory of Plant Trait Design, CAS Center for Excellence in Molecular Plant Sciences, Shanghai Institute of Plant Physiology and Ecology, Chinese Academy of Sciences, Shanghai, China
4 shared publications - Eric Schmieder Ober
The John Bingham Laboratory, NIAB, Cambridge, United Kingdom
3 shared publications - Joshua Colmer
Earlham Institute, Norwich Research Park, Norwich NR4 7UH, UK
3 shared publications - Ahong Wang
National Center for Gene Research, CAS Center for Excellence in Molecular Plant Sciences (CEMPS), Institute of Plant Physiology and Ecology (SIPPE), Chinese Academy of Sciences (CAS), Shanghai, China
2 shared publications - Bin Han
National Center for Gene Research, State Key Laboratory of Plant Trait Design, CAS Center for Excellence in Molecular Plant Sciences, Shanghai Institute of Plant Physiology and Ecology, Chinese Academy of Sciences, Shanghai, China
2 shared publications
Latest Publications
- Open Access
- 17 April 2026
- Published by Elsevier in Plant Phenomics
- Vol. 8 (2) , 100215
BloomSight: An ultra-high-frequency phenotyping framework for diurnal flowering dynamics in japonica and indica rice to enable genetic dissection and hybrid-breeding applications
- 17 April 2026
- Published by Elsevier in Plant Phenomics
- Vol. 8 (2) , 100215
Open AccessBloomSight: An ultra-high-frequency phenotyping framework for diurnal flowering dynamics in japonica and indica rice to enable genetic dissection and hybrid-breeding applications
- 22 August 2025
- Published by EMBL-EBI
BloomSight: a high-frequency phenotyping framework for mapping and genetically dissecting flowering dynamics in rice
BioStudies – one package for all the data supporting a study
- 22 August 2025
- Published by EMBL-EBI
BloomSight: a high-frequency phenotyping framework for mapping and genetically dissecting flowering dynamics in rice
BioStudies – one package for all the data supporting a study
- Open Access
- 23 July 2025
- Published by Wiley in Plant Biotechnology Journal
- Vol. 23 (11) , 4910-4929
OrchardQuant ‐ 3D : combining drone and LiDAR to perform scalable 3D phenotyping for characterising key canopy and floral traits in fruit orchards
Summary: Orchard fruits such as pear and apple are important for ensuring global food security and agricultural economy as they not only provide essential nutrients, but also support biodiversity and ecosystem services. Breeders, growers and plant researchers constantly study desirable tree morphological features and floral characteristics to ensure fruit production and quality. Still, traditional orchard phenotyping is often laborious, limited in scale and prone‐to‐error, resulting in many attempts to develop reliable and scalable toolkits to address this challenge. Here, we present OrchardQuant‐3D, an analytic pipeline for automating tree‐level analysis of key canopy and floral traits for different types of fruit orchards. We first built a data fusion algorithm to register 3D point clouds collected by both drones (for colour signals) and Light Detection And Ranging (LiDAR, for precise spatial properties), reconstructing high‐quality 3D orchard models at different growth stages. Then, we utilised precise global navigation satellite system signals to position trees in orchards with millimetre‐level accuracy, enabling tree‐level analysis of key canopy (e.g. crown volume and the number or branches) and floral traits (e.g. blossom clusters and volumes) using 3D computer vision, complex graph theory and feature engineering techniques. Equipped with the OrchardQuant‐3D pipeline, we successfully measured varietal differences of four pear cultivars from a small pear orchard in Nanjing China, followed by a scale‐up study that surveyed 3D tree morphologies, key floral and fruit traits from 1104 apple trees in an orchard in East Malling, United Kingdom. To the best of our knowledge, such a multi‐source, comprehensive and expandable methodology has not yet been introduced to this important research domain. Hence, we believe that our work demonstrates a step change in our ability to conduct scalable 3D orchard phenotyping, which is highly valuable to advance orchard breeding, precise tree management and orchard research greatly to sustain fruit tree production in a rapidly changing climate.
- 23 July 2025
- Published by Wiley in Plant Biotechnology Journal
- Vol. 23 (11) , 4910-4929
Open AccessOrchardQuant ‐ 3D : combining drone and LiDAR to perform scalable 3D phenotyping for characterising key canopy and floral traits in fruit orchards
Summary: Orchard fruits such as pear and apple are important for ensuring global food security and agricultural economy as they not only provide essential nutrients, but also support biodiversity and ecosystem services. Breeders, growers and plant researchers constantly study desirable tree morphological features and floral characteristics to ensure fruit production and quality. Still, traditional orchard phenotyping is often laborious, limited in scale and prone‐to‐error, resulting in many attempts to develop reliable and scalable toolkits to address this challenge. Here, we present OrchardQuant‐3D, an analytic pipeline for automating tree‐level analysis of key canopy and floral traits for different types of fruit orchards. We first built a data fusion algorithm to register 3D point clouds collected by both drones (for colour signals) and Light Detection And Ranging (LiDAR, for precise spatial properties), reconstructing high‐quality 3D orchard models at different growth stages. Then, we utilised precise global navigation satellite system signals to position trees in orchards with millimetre‐level accuracy, enabling tree‐level analysis of key canopy (e.g. crown volume and the number or branches) and floral traits (e.g. blossom clusters and volumes) using 3D computer vision, complex graph theory and feature engineering techniques. Equipped with the OrchardQuant‐3D pipeline, we successfully measured varietal differences of four pear cultivars from a small pear orchard in Nanjing China, followed by a scale‐up study that surveyed 3D tree morphologies, key floral and fruit traits from 1104 apple trees in an orchard in East Malling, United Kingdom. To the best of our knowledge, such a multi‐source, comprehensive and expandable methodology has not yet been introduced to this important research domain. Hence, we believe that our work demonstrates a step change in our ability to conduct scalable 3D orchard phenotyping, which is highly valuable to advance orchard breeding, precise tree management and orchard research greatly to sustain fruit tree production in a rapidly changing climate.
- Open Access
- 28 July 2022
- Published by Wiley in New Phytologist
- Vol. 236 (4) , 1584-1604
AirMeasurer: open‐source software to quantify static and dynamic traits derived from multiseason aerial phenotyping to empower genetic mapping studies in rice
Summary: Low‐altitude aerial imaging, an approach that can collect large‐scale plant imagery, has grown in popularity recently. Amongst many phenotyping approaches, unmanned aerial vehicles (UAVs) possess unique advantages as a consequence of their mobility, flexibility and affordability. Nevertheless, how to extract biologically relevant information effectively has remained challenging. Here, we present AirMeasurer, an open‐source and expandable platform that combines automated image analysis, machine learning and original algorithms to perform trait analysis using 2D/3D aerial imagery acquired by low‐cost UAVs in rice (Oryza sativa) trials. We applied the platform to study hundreds of rice landraces and recombinant inbred lines at two sites, from 2019 to 2021. A range of static and dynamic traits were quantified, including crop height, canopy coverage, vegetative indices and their growth rates. After verifying the reliability of AirMeasurer‐derived traits, we identified genetic variants associated with selected growth‐related traits using genome‐wide association study and quantitative trait loci mapping. We found that the AirMeasurer‐derived traits had led to reliable loci, some matched with published work, and others helped us to explore new candidate genes. Hence, we believe that our work demonstrates valuable advances in aerial phenotyping and automated 2D/3D trait analysis, providing high‐quality phenotypic information to empower genetic mapping for crop improvement.
- 28 July 2022
- Published by Wiley in New Phytologist
- Vol. 236 (4) , 1584-1604
Open AccessAirMeasurer: open‐source software to quantify static and dynamic traits derived from multiseason aerial phenotyping to empower genetic mapping studies in rice
Summary: Low‐altitude aerial imaging, an approach that can collect large‐scale plant imagery, has grown in popularity recently. Amongst many phenotyping approaches, unmanned aerial vehicles (UAVs) possess unique advantages as a consequence of their mobility, flexibility and affordability. Nevertheless, how to extract biologically relevant information effectively has remained challenging. Here, we present AirMeasurer, an open‐source and expandable platform that combines automated image analysis, machine learning and original algorithms to perform trait analysis using 2D/3D aerial imagery acquired by low‐cost UAVs in rice (Oryza sativa) trials. We applied the platform to study hundreds of rice landraces and recombinant inbred lines at two sites, from 2019 to 2021. A range of static and dynamic traits were quantified, including crop height, canopy coverage, vegetative indices and their growth rates. After verifying the reliability of AirMeasurer‐derived traits, we identified genetic variants associated with selected growth‐related traits using genome‐wide association study and quantitative trait loci mapping. We found that the AirMeasurer‐derived traits had led to reliable loci, some matched with published work, and others helped us to explore new candidate genes. Hence, we believe that our work demonstrates valuable advances in aerial phenotyping and automated 2D/3D trait analysis, providing high‐quality phenotypic information to empower genetic mapping for crop improvement.
- Open Access
- 16 July 2021
- Published by Oxford University Press (OUP) in Plant Physiology
- Vol. 187 (2) , 716-738
Large-scale field phenotyping using backpack LiDAR and CropQuant-3D to measure structural variation in wheat
Plant phenomics bridges the gap between traits of agricultural importance and genomic information. Limitations of current field-based phenotyping solutions include mobility, affordability, throughput, accuracy, scalability, and the ability to analyze big data collected. Here, we present a large-scale phenotyping solution that combines a commercial backpack Light Detection and Ranging (LiDAR) device and our analytic software, CropQuant-3D, which have been applied jointly to phenotype wheat (Triticum aestivum) and associated 3D trait analysis. The use of LiDAR can acquire millions of 3D points to represent spatial features of crops, and CropQuant-3D can extract meaningful traits from large, complex point clouds. In a case study examining the response of wheat varieties to three different levels of nitrogen fertilization in field experiments, the combined solution differentiated significant genotype and treatment effects on crop growth and structural variation in the canopy, with strong correlations with manual measurements. Hence, we demonstrate that this system could consistently perform 3D trait analysis at a larger scale and more quickly than heretofore possible and addresses challenges in mobility, throughput, and scalability. To ensure our work could reach non-expert users, we developed an open-source graphical user interface for CropQuant-3D. We, therefore, believe that the combined system is easy-to-use and could be used as a reliable research tool in multi-location phenotyping for both crop research and breeding. Furthermore, together with the fast maturity of LiDAR technologies, the system has the potential for further development in accuracy and affordability, contributing to the resolution of the phenotyping bottleneck and exploiting available genomic resources more effectively.
- 16 July 2021
- Published by Oxford University Press (OUP) in Plant Physiology
- Vol. 187 (2) , 716-738
Open AccessLarge-scale field phenotyping using backpack LiDAR and CropQuant-3D to measure structural variation in wheat
Plant phenomics bridges the gap between traits of agricultural importance and genomic information. Limitations of current field-based phenotyping solutions include mobility, affordability, throughput, accuracy, scalability, and the ability to analyze big data collected. Here, we present a large-scale phenotyping solution that combines a commercial backpack Light Detection and Ranging (LiDAR) device and our analytic software, CropQuant-3D, which have been applied jointly to phenotype wheat (Triticum aestivum) and associated 3D trait analysis. The use of LiDAR can acquire millions of 3D points to represent spatial features of crops, and CropQuant-3D can extract meaningful traits from large, complex point clouds. In a case study examining the response of wheat varieties to three different levels of nitrogen fertilization in field experiments, the combined solution differentiated significant genotype and treatment effects on crop growth and structural variation in the canopy, with strong correlations with manual measurements. Hence, we demonstrate that this system could consistently perform 3D trait analysis at a larger scale and more quickly than heretofore possible and addresses challenges in mobility, throughput, and scalability. To ensure our work could reach non-expert users, we developed an open-source graphical user interface for CropQuant-3D. We, therefore, believe that the combined system is easy-to-use and could be used as a reliable research tool in multi-location phenotyping for both crop research and breeding. Furthermore, together with the fast maturity of LiDAR technologies, the system has the potential for further development in accuracy and affordability, contributing to the resolution of the phenotyping bottleneck and exploiting available genomic resources more effectively.
- Open Access
Large-scale field phenotyping using backpack LiDAR and GUI-based CropQuant-3D to measure structural responses to different nitrogen treatments in wheat
Plant phenomics is widely recognised as a key area to bridge the gap between traits of agricultural importance and genomic information. A wide range of field-based phenotyping solutions have been developed, from aerial-based to ground-based fixed gantry platforms and handheld devices. Nevertheless, several disadvantages of these current systems have been identified by the research community concerning mobility, affordability, throughput, accuracy, scalability, as well as the ability to analyse big data collected. Here, we present a novel phenotyping solution that combines a commercial backpack LiDAR device and our graphical user interface (GUI) based software called CropQuant-3D, which has been applied to phenotyping of wheat and associated 3D trait analysis. To our knowledge, this is the first use of backpack LiDAR for field-based plant research, which can acquire millions of 3D points to represent spatial features of crops. A key feature of the innovation is the GUI software that can extract plot-based traits from large, complex point clouds with limited computing time and power. We describe how we combined backpack LiDAR and CropQuant-3D to accurately quantify crop height and complex 3D traits such as variation in canopy structure, which was not possible to measure through other approaches. Also, we demonstrate the methodological advance and biological relevance of our work in a case study that examines the response of wheat varieties to three different levels of nitrogen fertilisation in field experiments. The results indicate that the combined solution can differentiate significant genotype and treatment effects on key morphological traits, with strong correlations with conventional manual measurements. Hence, we believe that the combined solution presented here could consistently quantify key traits at a larger scale and more quickly than heretofore possible, indicating the system could be used as a reliable research tool in large-scale and multi-location field phenotyping for crop research and breeding activities. We exhibit the system’s capability in addressing challenges in mobility, throughput, and scalability, contributing to the resolution of the phenotyping bottleneck. Furthermore, with the fast maturity of LiDAR technologies, technical advances in image analysis, and open software solutions, it is likely that the solution presented here has the potential for further development in accuracy and affordability, helping us fully exploit available genomic resources.
Open AccessLarge-scale field phenotyping using backpack LiDAR and GUI-based CropQuant-3D to measure structural responses to different nitrogen treatments in wheat
Plant phenomics is widely recognised as a key area to bridge the gap between traits of agricultural importance and genomic information. A wide range of field-based phenotyping solutions have been developed, from aerial-based to ground-based fixed gantry platforms and handheld devices. Nevertheless, several disadvantages of these current systems have been identified by the research community concerning mobility, affordability, throughput, accuracy, scalability, as well as the ability to analyse big data collected. Here, we present a novel phenotyping solution that combines a commercial backpack LiDAR device and our graphical user interface (GUI) based software called CropQuant-3D, which has been applied to phenotyping of wheat and associated 3D trait analysis. To our knowledge, this is the first use of backpack LiDAR for field-based plant research, which can acquire millions of 3D points to represent spatial features of crops. A key feature of the innovation is the GUI software that can extract plot-based traits from large, complex point clouds with limited computing time and power. We describe how we combined backpack LiDAR and CropQuant-3D to accurately quantify crop height and complex 3D traits such as variation in canopy structure, which was not possible to measure through other approaches. Also, we demonstrate the methodological advance and biological relevance of our work in a case study that examines the response of wheat varieties to three different levels of nitrogen fertilisation in field experiments. The results indicate that the combined solution can differentiate significant genotype and treatment effects on key morphological traits, with strong correlations with conventional manual measurements. Hence, we believe that the combined solution presented here could consistently quantify key traits at a larger scale and more quickly than heretofore possible, indicating the system could be used as a reliable research tool in large-scale and multi-location field phenotyping for crop research and breeding activities. We exhibit the system’s capability in addressing challenges in mobility, throughput, and scalability, contributing to the resolution of the phenotyping bottleneck. Furthermore, with the fast maturity of LiDAR technologies, technical advances in image analysis, and open software solutions, it is likely that the solution presented here has the potential for further development in accuracy and affordability, helping us fully exploit available genomic resources.